Database Develop

OnePlus 3T - invalid partition selection

Hi
Today I get my OnePlus 3T. So I did that, what I do with any new phone = TWRP and Root. So I...
1. Boot, download and install Oxygen OS 4
2. Fastboot unlock bootloader, flash TWRP (latest official build)
3. Reboot in TWRP and TWRP ask for password (never set any password for this phone, nothing! just start without sim and set nothing, only wifi for the first step)
4. Download SuperSU .zip and try to root - 0MB when I try to install SuperSu
5. TWRP > Wipe > Format data
6. Reboot and now I see (when I click on install) internal Storage (52100 MB). After that (dont flash SuperSU) just boot in TWRP
7. With OTG and USB stick I flash Oxygen OS 4.0 (full ROM with 1,4GB) > phone just reboot in TWRP.
When I go to
Wipe > Advanced Wipe > check Internal Storage > click on Repair or Change File System I get "invalid partition selection"
This also happen, when I check Dalvik/ART Cache. With System, Data and Cache no problems.
I have no idea what I can do. Over Google I only find some thread from Huawei and Samsung device, something with PIT file. Nothing to OnePlus (not One, not Two and not Three).

Klanac89 said:
Hi
Today I get my OnePlus 3T. So I did that, what I do with any new phone = TWRP and Root. So I...
1. Boot, download and install Oxygen OS 4
2. Fastboot unlock bootloader, flash TWRP (latest official build)
3. Reboot in TWRP and TWRP ask for password (never set any password for this phone, nothing! just start without sim and set nothing, only wifi for the first step)
4. Download SuperSU .zip and try to root - 0MB when I try to install SuperSu
5. TWRP > Wipe > Format data
6. Reboot and now I see (when I click on install) internal Storage (52100 MB). After that (dont flash SuperSU) just boot in TWRP
7. With OTG and USB stick I flash Oxygen OS 4.0 (full ROM with 1,4GB) > phone just reboot in TWRP.
When I go to
Wipe > Advanced Wipe > check Internal Storage > click on Repair or Change File System I get "invalid partition selection"
This also happen, when I check Dalvik/ART Cache. With System, Data and Cache no problems.
I have no idea what I can do. Over Google I only find some thread from Huawei and Samsung device, something with PIT file. Nothing to OnePlus (not One, not Two and not Three).
Click to expand...
Click to collapse
This question seems to keep repeating itself due to missing information on TWRP post about the latest official version being incompatible with OOS 4 encryption method, but that is the explanation. There is a beta release of TWRP in post 550 in that thread that is supposed to fix this.
Here's some spoon feeding for you
https://forum.xda-developers.com/showthread.php?t=3507308
Lookup post numbered 550 and it has a link to the unofficial TWRP update

What to do? Boot in beta1 and looks like the same... can flash OOS 4 but still the same problem.
Gesendet von meinem MI 5s Plus mit Tapatalk

Looking for ROM for Xperia SP with locked bootloader

The rooting status of my phone says: 'Bootloader unlock allowed: No'. Some hours of research made me believe that on the user side it is not possible to change that status. So I am stuck with my locked bootloader. Originally I wanted to flash LineageOS, but this ROM seems to depend on an unlocked BL. Please correct me, if I'm wrong. Now I am looking for an alternative that can be installed by a not so experienced user (me). Surely, I don't want to brick my phone. My first question is, what conditions does a ROM have to meet to be installable on a BL locked device? Are old ROMs of CyanogenMod an option? Or plain Android? Any suggestion is appreciated. Thanks.

https://forum.xda-developers.com/xperia-sp/development/xperiasp-locked-bootloader-lbl-t2947194
That's lolipop and was the last one made for locked bootloader. It has all the steps in there. I don't know if all the linked stuff works, but I can confirm that the ROM's link is still up.

The download links on d-h.st only redirect me to advertisement pages, but no file can be downloaded
Anyway, can I conclude, that all ROMs based on Marshmallow and later cannot be flashed with LBL, and ROMs based on Lollypop and earlier can?

Basically, yes. Not all of the ROMs not based around Marshmallow/Nougat can be installed on LBL phones, though. If the op or the thread title doesn't mention that it can be installed on LBL phones then you can't.

https://drive.google.com/drive/mobile/folders/0B9ezDTx7eDfLNHVsUE9ub3FCeUU
I have an archive of last CM builds on my gdrive
There are also one stable build of 4.4 for unlocked bootloader

laim_name said:
https://drive.google.com/drive/mobile/folders/0B9ezDTx7eDfLNHVsUE9ub3FCeUU
I have an archive of last CM builds on my gdrive
There are also one stable build of 4.4 for unlocked bootloader
Click to expand...
Click to collapse
Is the installation process the same as for this ROM?
Do I need a kernel upgrade? Current: 3.4.0

Please, could anyone check and comment on my work-flow for the installation of CM11 on my Xperia SP with LBL? I haven't done it yet, but want to make sure this is the correct way, so I will not brick my phone. One thing, I am not sure of is, whether I need to upgrade the kernel, since CM11 is based on KitKat (I believe) and I still have the JellyBean kernel... Another open question is, will the Nandroid backup be erased from the internal storage as well by applying the 'Wipe' function of TWRP?
Preparation:
- Download CM11 ROM from https://drive.google.com/drive/folders/0B9ezDTx7eDfLLW0zODZRWkdKZUk to desktop PC
- Export contacts etc. to backup file(s)
- Charge phone battery to full capacity
- Remove SIM card from device and insert SD card for Nandroid backup
- Establish Wi-Fi connection
- Ensure that USB and cable drivers are installed
- Select 'Settings > Xperia > USB Connectivity > USB connection mode > Media transfer mode (MTP)'
- Connect phone to desktop PC by USB cable
- Copy backup files for contacts etc. to PC
- Copy ROM from PC to device's internal storage
Root device:
- Install Aptoide from http://www.aptoide.com/
- Install Root Checker with Aptoide
- Select 'Settings > Security > Unknown sources: yes'
- Install TowelRoot from https://towelroot.com/
- Run TowelRoot
- Check root with Root Checker
Install TWRP:
- Install official TWRP app with Aptoide (also available at https://eu.dl.twrp.me/twrpapp/)
- Run TWRP app and install TWRP recovery for my device
- Shut down device
Nandroid backup:
- Boot to TWRP recovery (press Vol— and power buttons)
- Select 'Custom recovery > Backup' to copy full device backup to SD card
Wipe device:
- Boot to TWRP recovery
- Select 'Wipe' to wipe the device
Flash ROM:
- Boot to TWRP recovery
- Select 'Install' to flash CM11 ROM from internal storage to boot partition
- Shut down device
- Insert SIM card
- Reboot

[GUIDE]-[ROM][8.1][LineageOS 15.1 - Huawei Mediapad M3 8.4][BTV-W09, BTV-DL09]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Special Thanks to: Surdu_Petru for developing this ROM and the new TWRP recovery. Visit his original threads below..
[ROM][8.1][WIP][ LineageOS 8.1 For Huawei MediaPad M3 8.4 ]
LineageOS / AOSP For M3 8.4, Kirin 950 !​
You need to have ADB and Fastboot installed on your PC.
Your device must have the Bootloader Unlocked and have TWRP installed! If you haven't done this already please visit my other post.
[GUIDE]-[Unlock Bootloader+TWRP+Root] Huawei MediaPad M3 8.4 [BTV-W09, BTV-DL09]
This will WIPE ALL DATA from your device!!! Please make a backup via TWRP BEFORE you continue., Make sure to include BOOT, SYSTEM, DATA and VENDOR partitions. Save the backup to an external SDcard or your PC... and as always: Don't blame me for Bricks & FOLLOW THIS GUIDE AT YOUR OWN RISK!!​
Make your original backup using the Greatslon TWRP 3.0.3 because it supports encryption.
You will also need to use the Greatslon TWRP to restore the backup if you decide to go back to Stock.
-Backup to External SDcard-
0. Boot your device into TWRP. Pwr+VolUP.
1. Backup Your Data. | Backup -> Check Boot, Data, System, Vendor -> Select Storage: Micro SD Card -> OK -> Swipe to Backup
2. Wait for backup to finish
3. Reboot device.​ OR
-Backup to PC-
0. Boot your device into TWRP. Pwr+VolUP.
1. Select Partitions. | Backup -> Check Boot, Data, System, Vendor.
2. Plug your device into your PC.
3. Open a cmd prompt in the folder you want to save your backup in.
4. Type the following commands. (Lines with // are comments only)
Code:
adb devices
//Make sure your device is listed
adb backup --twrp
//swipe to unlock TWRP if screen is off
5. Wait for Backup to finish.
6. Check PC folder to make sure it copied the data.​
Now your ready to start!
-Flash TWRP 3.3.1-
0. Download TWRP 3.3.1-0
1. Plug you device into your PC.
2. Open a cmd prompt in the same folder as twrp image.
3. Type the following commands. (Lines with // are comments only)
Code:
adb devices
//make sure your device is listed.
adb reboot bootloader
//wait for device to reboot.
fastboot devices
//make sure your device is listed.
fastboot flash recovery twrp-3.3.1-0.img
//wait for flash to complete.
4. Shut down device
5. Boot into recovery (Pwr+VolUP) to confirm install.
Congrats You've updated to TWRP 3.3.1​-Flash LineageOS + Optional Root-
0. Download LineageOS 15.1 zip file
1. Download OpenGapps ARM64 8.1 Pico
2. Download W09 Boot Image (For BTV-W09 ONLY!)
3. Download the Latest Magisk Release (Optional for Root)
4. Download Magisk Manager APK (Optional for Root)
5. Boot into recovery (Pwr+VolUP).
6. Format DATA. | 'Wipe' -> 'Format Data' -> Type: YES -> Touch Enter...
7. Reboot TWRP. | 'Reboot' -> 'Recovery'...
8. Wipe Vendor + System. | 'Wipe' -> 'Advanced Wipe' -> Select: System + Vendor -> Swipe to wipe...
9. Factory Reset. | 'Wipe' -> Swipe to Factory Reset...
10. Plug device into your PC
11. Open a cmd prompt in the folder where you downloaded files.
12. Type the following commands. (Lines with // are comments only)
Code:
adb devices
//make sure your device is listed.
adb push lineage-15.1.0-btv_v1.zip sdcard/
//wait for file to copy
adb push open_gapps-arm64-8.1-pico-20200418.zip sdcard/
//change if your file is named different
adb push boot_btv-w09_v1.img sdcard/
//Only for BTV-W09!
adb push Magisk-v20.4.zip sdcard/
// (Optional for Root)
adb push MagiskManager-v7.5.1.apk sdcard/
// (Optional for Root)
11. Install LineageOS + Gapps. | 'Install' -> Select: lineage zip -> 'Add More Zips' -> Select: Gapps zip -> Swipe to confirm Flash...
12. (Only for BTV-W09) Install Boot Image. | 'Install' -> 'Install Image' -> Select: w09 Image -> Select: Boot Partition -> Swipe to Flash...
13. (Optional Root) Install Magisk. | 'Install' -> Select: Magisk zip -> Swipe to confirm flash...
14. Wipe Cache/Dalvik.
15. Reboot System...
16. (Optional Root) Install Magisk Manager to confirm root...
Congrats! Your device should now be Unlocked and Rooted, running TWRP 3.3.1 and LineageOS 15.1​

LOS 15.1 on M3
Hi. First I want to thank @surdu_petru for his amazing work. Now my Mediapad M3 (BTV-DL09) is powered by LineageOS 15.1 with Magisk. Works very well. Smooth and responsible. Using it couple hours and haven't notice any reboots or freezes.
I miss only bluetooth. Without it I cannot use Denon Heos App for my speaker.
Lack of camera is not an issue for me.
After adding BT full support this ROM may be the best for this (forgotten by Huawei) device. THX

tajniakos said:
Hi. First I want to thank @surdu_petru for his amazing work. Now my Mediapad M3 (BTV-DL09) is powered by LineageOS 15.1 with Magisk. Works very well. Smooth and responsible. Using it couple hours and haven't notice any reboots or freezes.
I miss only bluetooth. Without it I cannot use Denon Heos App for my speaker.
Lack of camera is not an issue for me.
After adding BT full support this ROM may be the best for this (forgotten by Huawei) device. THX
Click to expand...
Click to collapse
surdu_petru just got camera working on the ROM and is continuing to make progress in other areas as well., Subscribe to his original threads to stay up to date., I believe he is also planning to make a PIE ROM for the device as well Thanks for the reply...

ericzollman said:
Special Thanks to: Surdu_Petru for developing this ROM and the new TWRP recovery. Visit his original threads below..
[ROM][8.1][WIP][ LineageOS 8.1 For Huawei MediaPad M3 8.4 ]
LineageOS / AOSP For M3 8.4, Kirin 950 !​
You need to have ADB and Fastboot installed on your PC.
Your device must have the Bootloader Unlocked and have TWRP installed! If you haven't done this already please visit my other post.
[GUIDE]-[Unlock Bootloader+TWRP+Root] Huawei MediaPad M3 8.4 [BTV-W09, BTV-DL09]
This will WIPE ALL DATA from your device!!! Please make a backup via TWRP BEFORE you continue., Make sure to include BOOT, SYSTEM, DATA and VENDOR partitions. Save the backup to an external SDcard or your PC... and as always: Don't blame me for Bricks & FOLLOW THIS GUIDE AT YOUR OWN RISK!!​
Make your original backup using the Greatslon TWRP 3.0.3 because it supports encryption.
You will also need to use the Greatslon TWRP to restore the backup if you decide to go back to Stock.
-Backup to External SDcard-
0. Boot your device into TWRP. Pwr+VolUP.
1. Backup Your Data. | Backup -> Check Boot, Data, System, Vendor -> Select Storage: Micro SD Card -> OK -> Swipe to Backup
2. Wait for backup to finish
3. Reboot device.​ OR
-Backup to PC-
0. Boot your device into TWRP. Pwr+VolUP.
1. Select Partitions. | Backup -> Check Boot, Data, System, Vendor.
2. Plug your device into your PC.
3. Open a cmd prompt in the folder you want to save your backup in.
4. Type the following commands. (Lines with // are comments only)
Code:
adb devices
//Make sure your device is listed
adb backup --twrp
//swipe to unlock TWRP if screen is off
5. Wait for Backup to finish.
6. Check PC folder to make sure it copied the data.​
Now your ready to start!
-Flash TWRP 3.3.1-
0. Download TWRP 3.3.1-0
1. Plug you device into your PC.
2. Open a cmd prompt in the same folder as twrp image.
3. Type the following commands. (Lines with // are comments only)
Code:
adb devices
//make sure your device is listed.
adb reboot bootloader
//wait for device to reboot.
fastboot devices
//make sure your device is listed.
fastboot flash recovery twrp-3.3.1-0.img
//wait for flash to complete.
4. Shut down device
5. Boot into recovery (Pwr+VolUP) to confirm install.
Congrats You've updated to TWRP 3.3.1​-Flash LineageOS + Optional Root-
0. Download LineageOS 15.1 zip file
1. Download OpenGapps ARM64 8.1 Pico
2. Download W09 Boot Image (For BTV-W09 ONLY!)
3. Download the Latest Magisk Release (Optional for Root)
4. Download Magisk Manager APK (Optional for Root)
5. Boot into recovery (Pwr+VolUP).
6. Format DATA. | 'Wipe' -> 'Format Data' -> Type: YES -> Touch Enter...
7. Reboot TWRP. | 'Reboot' -> 'Recovery'...
8. Wipe Vendor + System. | 'Wipe' -> 'Advanced Wipe' -> Select: System + Vendor -> Swipe to wipe...
9. Factory Reset. | 'Wipe' -> Swipe to Factory Reset...
10. Plug device into your PC
11. Open a cmd prompt in the folder where you downloaded files.
12. Type the following commands. (Lines with // are comments only)
Code:
adb devices
//make sure your device is listed.
adb push lineage-15.1.0-btv_v1.zip sdcard/
//wait for file to copy
adb push open_gapps-arm64-8.1-pico-20200418.zip sdcard/
//change if your file is named different
adb push boot_btv-w09_v1.img sdcard/
//Only for BTV-W09!
adb push Magisk-v20.4.zip sdcard/
// (Optional for Root)
adb push MagiskManager-v7.5.1.apk sdcard/
// (Optional for Root)
11. Install LineageOS + Gapps. | 'Install' -> Select: lineage zip -> 'Add More Zips' -> Select: Gapps zip -> Swipe to confirm Flash...
12. (Only for BTV-W09) Install Boot Image. | 'Install' -> 'Install Image' -> Select: w09 Image -> Select: Boot Partition -> Swipe to Flash...
13. (Optional Root) Install Magisk. | 'Install' -> Select: Magisk zip -> Swipe to confirm flash...
14. Wipe Cache/Dalvik.
15. Reboot System...
16. (Optional Root) Install Magisk Manager to confirm root...
Congrats! Your device should now be Unlocked and Rooted, running TWRP 3.3.1 and LineageOS 15.1​
Click to expand...
Click to collapse
Hi! could you check the links??? MEGA says the file is not found
Thank you for all
regards

pakoo19 said:
Special Thanks to: Surdu_Petru for developing this ROM and the new TWRP recovery. Visit his original threads below..
[ROM][8.1][WIP][ LineageOS 8.1 For Huawei MediaPad M3 8.4 ]
LineageOS / AOSP For M3 8.4, Kirin 950 !
You need to have ADB and Fastboot installed on your PC.
Your device must have the Bootloader Unlocked and have TWRP installed! If you haven't done this already please visit my other post.
[GUIDE]-[Unlock Bootloader+TWRP+Root] Huawei MediaPad M3 8.4 [BTV-W09, BTV-DL09]
This will WIPE ALL DATA from your device!!! Please make a backup via TWRP BEFORE you continue., Make sure to include BOOT, SYSTEM, DATA and VENDOR partitions. Save the backup to an external SDcard or your PC... and as always: Don't blame me for Bricks & FOLLOW THIS GUIDE AT YOUR OWN RISK!!
Make your original backup using the Greatslon TWRP 3.0.3 because it supports encryption.
You will also need to use the Greatslon TWRP to restore the backup if you decide to go back to Stock.
-Backup to External SDcard-
0. Boot your device into TWRP. Pwr+VolUP.
1. Backup Your Data. | Backup -> Check Boot, Data, System, Vendor -> Select Storage: Micro SD Card -> OK -> Swipe to Backup
2. Wait for backup to finish
3. Reboot device.
OR
-Backup to PC-
0. Boot your device into TWRP. Pwr+VolUP.
1. Select Partitions. | Backup -> Check Boot, Data, System, Vendor.
2. Plug your device into your PC.
3. Open a cmd prompt in the folder you want to save your backup in.
4. Type the following commands. (Lines with // are comments only)
5. Wait for Backup to finish.
6. Check PC folder to make sure it copied the data.
Now your ready to start!
-Flash TWRP 3.3.1-
0. Download TWRP 3.3.1-0
1. Plug you device into your PC.
2. Open a cmd prompt in the same folder as twrp image.
3. Type the following commands. (Lines with // are comments only)
4. Shut down device
5. Boot into recovery (Pwr+VolUP) to confirm install.
Congrats You've updated to TWRP 3.3.1
-Flash LineageOS + Optional Root-
0. Download LineageOS 15.1 zip file
1. Download OpenGapps ARM64 8.1 Pico
2. Download W09 Boot Image (For BTV-W09 ONLY!)
3. Download the Latest Magisk Release (Optional for Root)
4. Download Magisk Manager APK (Optional for Root)
5. Boot into recovery (Pwr+VolUP).
6. Format DATA. | 'Wipe' -> 'Format Data' -> Type: YES -> Touch Enter...
7. Reboot TWRP. | 'Reboot' -> 'Recovery'...
8. Wipe Vendor + System. | 'Wipe' -> 'Advanced Wipe' -> Select: System + Vendor -> Swipe to wipe...
9. Factory Reset. | 'Wipe' -> Swipe to Factory Reset...
10. Plug device into your PC
11. Open a cmd prompt in the folder where you downloaded files.
12. Type the following commands. (Lines with // are comments only)
Hi! could you check the links??? MEGA says the file is not found
Thank you for all
regards
Click to expand...
Click to collapse
Hello First of all thank you for making this custom rom! I have installed it on my BTV-W09 model and beside the Bluetooth it is just working fine..... But I have an issue with permissions. File managers, galleries etc are denied when trying to access internal storage. Did I miss a step in installing or is this a known issue ? Thanks

pakoo19 said:
Hi! could you check the links??? MEGA says the file is not found
Thank you for all
regards
Click to expand...
Click to collapse
CARIGNAN72 said:
Hello First of all thank you for making this custom rom! I have installed it on my BTV-W09 model and beside the Bluetooth it is just working fine..... But I have an issue with permissions. File managers, galleries etc are denied when trying to access internal storage. Did I miss a step in installing or is this a known issue ? Thanks
Click to expand...
Click to collapse
Please, check the official thread of LOS 15.1, this thread it's here only for INFO ... and the OP it's not the developer of this custom ROM ! Thanks !

Wow, it worked!! Glad that I got the rom installed (almost) flawlessly ! If you checked my other posts on the other guide it didn't go really flawlessly when I was attempting to unlock the device
Now I'll play around a little bit to get used to this new lineage territory
Thanks to surdu_petru who really worked hard on this... can't believe I'm giving a new life to my Beethoven which was getting completely abandoned from Huawei (last security patch over a year ago if I remember right!)
I can boot fine and all seems to be good, however I just noticed a thing when installing GApps: At the end of the install process, after stating "installation complete", it kinda freezes for half a minute or so and then gives me the error "Updater process ended with signal: 9" (see attached image). I looked it up and it should mean "Killed by the application". Maybe TWRP is seeing that the update process does not terminate and it kills it? I tried both with the last "pico" and "nano" versions (20. August 2020) which I downloaded from https://opengapps.org/.
Anyways, so far so good, can't wait for the update which seems to be coming very soon (no pressure surdu_petru)
EDIT:
I just flashed the latest OS update from surdu_petru and with that one, I didn't give me the "signal 9" error at the end of the Open GApps install as I had for the previous version. Great!

Hi, after install twrp recovery, press (Pwr+VolUP) goto Emui recovery instead of twrp, anything I am missing ?
Thanks

Question Unable to decrypt FBE device

Hi Friends,
I am seeing the following error:
"E: Unable to decrypt FBE device"
I performed the following steps:
1. flash the TWRP : TWRP link: https://androidfilehost.com/?fid=2188818919693773061
2. Formatted my device and wiped data/cache/dalvik storage.
3. Reboot to recovery.
4. Flash Crdroid installation and reboot to System.
Crdroid is not at all launching. I am seeing a boot loop i.e phone is continuously restarting with the Redmi logo.
I entered into recovery and then I noticed OS is not installed. when I tried formatting/wiping of data I am seeing below error:
"E: Unable to decrypt FBE device"
attached are kernel logs and recovery logs and Screenshots of errors at the time of flashing ROM.
Device: Redmi 9 Power
Apologies friends if I am confusing you with terminology I am completely new to this space and I am doing this on my own for the first time.
Could someone please help me.
Thanks,
LimeJuice

Did you solve your problem?

i install xiaomi.eu rom and same error too but booting works ok also rom is ok
i use this
twrp_lime_R9T_3.5.A10_05-03-2021_D-bl-l_fix_mtp_after_format.img
i dont know why it showing this error.

Realme X2 Pro TWRP Lineage install without error but cant boot

I got an European Realme X2 pro on which i now got TWRP running (after flashing a modified vbmeta image and only one TWRP version seems to work). Of course the bootloader is unlocked. The problems is that when i change setting in TWRP and reboot it doesent save them.
Also when i install a lineageos 19 zip, this goes through without an error, but it only boots to bootlaoder.
After rebooting (from twrp) files in /sdcard are gone, is this normal?
And lastly when i go to wipe in TWRP it doesent give me the option to wipe system, altough i can "mount" system. In Backup TWRP shows that there is a system partition which has 1450mb.
Thanks for your replies in advance
Links:
Modified TWRP and modified vbmeta: https://forum.xda-developers.com/t/...l-twrp-for-rui2-realme-x2-pro-stable.4388355/
Lineage: https://forum.xda-developers.com/t/...-realme-x2-pro-rmx1931-cn-unofficial.4355023/