Related
Hi there!
I'm trying hard to get the custom rom RomAur running at my Xperia Z but I'm having some trouble to finally installing it.
Thread to the Rom: http://forum.xda-developers.com/showthread.php?t=2167064
What has to be done:
1 - Unlock bootloader - http://unlockbootloader.sonymobile.com/
2 - Copy rom to ext sdcard
3 - This rom if come without kernel , to get recovery flash DooMLoRD advanced stock kernel - http://forum.xda-developers.com/show....php?t=2167381
4 - Enter to recovery
5 - Make sure to do a Factory Reset/ Wipe data / system/cache before installing ROM
6 - Install rom
7 - Reboot system
8 - On disable flash recovery stock say no to get init.d support
9 - Enjoy
What I managed so far:
1 - Unlock bootloader - http://unlockbootloader.sonymobile.com/
2 - Copy rom to ext sdcard
3 - This rom if come without kernel , to get recovery flash DooMLoRD advanced stock kernel - http://forum.xda-developers.com/show....php?t=2167381
4 - Enter to recovery
Problem is: After doing a factory reset I don't know how to finally install the custom rom. Could somebody help me with that? If I manage to get it working on my Xperia Z I will write a step by step-guide to install custom rom with that phone.
Hi There,
Maybe you should have posted this into the forum of the Rom.
But to install it - once you have copied the Zip file to your device - you select 'Install from Zip' from the main menu of the recovery - select the Zip file and wait while it installs - reboot - Done!
Cheers
Paul
harrytipper said:
Hi there!
I'm trying hard to get the custom rom RomAur running at my Xperia Z but I'm having some trouble to finally installing it.
Thread to the Rom: http://forum.xda-developers.com/showthread.php?t=2167064
What has to be done:
1 - Unlock bootloader - http://unlockbootloader.sonymobile.com/
2 - Copy rom to ext sdcard
3 - This rom if come without kernel , to get recovery flash DooMLoRD advanced stock kernel - http://forum.xda-developers.com/show....php?t=2167381
4 - Enter to recovery
5 - Make sure to do a Factory Reset/ Wipe data / system/cache before installing ROM
6 - Install rom
7 - Reboot system
8 - On disable flash recovery stock say no to get init.d support
9 - Enjoy
What I managed so far:
1 - Unlock bootloader - http://unlockbootloader.sonymobile.com/
2 - Copy rom to ext sdcard
3 - This rom if come without kernel , to get recovery flash DooMLoRD advanced stock kernel - http://forum.xda-developers.com/show....php?t=2167381
4 - Enter to recovery
Problem is: After doing a factory reset I don't know how to finally install the custom rom. Could somebody help me with that? If I manage to get it working on my Xperia Z I will write a step by step-guide to install custom rom with that phone.
Click to expand...
Click to collapse
at CWM..please select install zip from external sd. then you will finally install the rom. did u managed to go into CWM interface? i assume yes since u already done factory reset.
doki81 said:
at CWM..please select install zip from external sd. then you will finally install the rom. did u managed to go into CWM interface? i assume yes since u already done factory reset.
Click to expand...
Click to collapse
So far I managed to install the advanced stock kernel and get root on my device (using fastboot.exe and BusyBox). So after that I enter recovery mode using Quick Boot. Then I have to do factory reset as found in preferences on my device. So far I think I got it.
But after that I have to wipe my data, system and cache. How do I do that and go on with the steps upcoming? After doing that I normally have to configure the device again for letting me use Recovery Manager and stuff like that, or don't I? So how should I do the full wipe?
Thank you for your suggestions so far!
harrytipper said:
So far I managed to install the advanced stock kernel and get root on my device (using fastboot.exe and BusyBox). So after that I enter recovery mode using Quick Boot. Then I have to do factory reset as found in preferences on my device. So far I think I got it.
But after that I have to wipe my data, system and cache. How do I do that and go on with the steps upcoming? After doing that I normally have to configure the device again for letting me use Recovery Manager and stuff like that, or don't I? So how should I do the full wipe?
Thank you for your suggestions so far!
Click to expand...
Click to collapse
the next step you should do is to flash the CWM..
follow guide in this post http://forum.xda-developers.com/showthread.php?t=2167381
afterward you can do full wipe from the CWM and proceed to use CWM install zip function to flash the new aur rom.
paulrgod said:
Hi There,
Maybe you should have posted this into the forum of the Rom.
Paul
Click to expand...
Click to collapse
Sorry, I thought this was the right place to ask, because I don't want to spam in other forums. Maybe you could move it?
paulrgod said:
But to install it - once you have copied the Zip file to your device - you select 'Install from Zip' from the main menu of the recovery - select the Zip file and wait while it installs - reboot - Done!
Paul
Click to expand...
Click to collapse
I tried both ways, copying the zip file to root of the device itself and onto sd card (RomAur V1.1 XZ C6603.zip, FAT32 formatted 16 gb sd card). But Recovery Manager doesn't show any of these files when I chose to install from sd card.
sorry for my english, I'm not a native speaker :silly:
doki81 said:
follow guide in this post http://forum.xda-developers.com/showthread.php?t=2167381
Click to expand...
Click to collapse
ok, I'll do that again. I tried this yesterday already and so I do have a few questions:
from the guide you sent me:
download the advanced stock kernel (contains recovery)
reboot device into fastboot mode
Code:
adb reboot bootloader
now flash the recovery using
Code:
fastboot flash boot kernel.img
[where kernel.img is the name of the file image u downloaded]
thats it!
As I use "adb reboot bootloader" it keeps telling me "error: device not found", even though its connected to PC using fastboot mode and "fastboot devices" shows my Xperia Z as connected in fastboot mode. What do I do wrong?
Second question: Is the advanced stock kernel with recovery the one I already installed? Z_DooMLoRD_insecure_FW-350.img? Or Z_DooMLoRD_CF-Auto-Root-ported_FW-350.img? So which kernel do I use in the last step?
I finished it and I just made some stupid mistake in my procedure (I was alredy wondering how Xperia Z can be so hard to put a new rom into..). I'll write a How-To for newbies the until monday. Thanks for your help so far!
How to install RomAur (and other ROMS) on Sony Xperia Z
This is how I managed to install RomAur at my Xperia Z. After realizing my mistake I noticed it's not much different to other android devices.
1. So first to install kernels and get root I unlocked the boot loader using this really good descriptions:
http://unlockbootloader.sonymobile.com/
http://www.techethon.com/root-sony-xperia-z-tutorial-easy-how-to/
http://forum.xda-developers.com/showthread.php?t=2153261
2. Then I started the device in fastboot mode by pressing volume + while connecting to PC and used fastboot.exe (shift+right click in the containing folder to start cmd) typing in this:
fastboot flash boot Z_DooMLoRD_AdvStkKernel_FW-350_v2.img
IMPORTANT Z_DooMLoRD_AdvStkKernel_FW-350_v2.img was contained in the same folder as fastboot.exe. Maybe there is already another new kernel to do this with, this one worked for me. Starting the device in fastboot mode can also be achieved by usind this command before flashing with the new kernel: adb reboot bootloader
3. Anyway after flashing I typed in this: fastboot reboot
4. Then I've put the zip file onto my micro sd (fat32 formatted, 16gb) and restarted the device disconnected from PC. This is what I've done wrong :silly:
While the device went on I pressed volume + when the SONY screen showed up and the led started to flash in several colors.
5. Now in the menu wiped/cleared/formatted everythin except the external sd-card and installed the "update" by using volume buttons to navigate and power button to confirm.
This is what worked for me. I might have forgotten some stuff so in case there might be something to add, just reply on this!
[TOOLKIT] UNIFIED ANDROID TOOLKIT - SAMSUNG GALAXY NOTE 8.0 [2012 MODEL] - Drivers, Root, Recovery + MORE
The Unified Android Toolkit brings together all the Nexus and Samsung Toolkits and supports a multitude of Nexus and Samsung devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
SUPPORTED MODELS
GT-N5100 3G/WIFI MODEL
GT-N5110 WIFI ONLY MODEL
GT-N5120 LTE MODEL
Click to expand...
Click to collapse
FUNCTIONS OF UNIFIED ANDROID TOOLKIT V1.3.3 [8TH DEC 2014]
* Install correct adb/fastboot drivers automatically on Windows xp/vista/7/8 32bit+64bit
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your data from selectable folders [internal or external storage] to your PC for a Full Safe backup of data
* Unlock/Re-Lock your Bootloader [Nexus]
* Root Stock builds
* Various Root options using insecure boot image or custom recovery
* ALLINONE to Unlock, Root, Rename the Restore Files and install busybox [Nexus]
* ALLINONE to flash custom Recovery Root, Rename the Restore Files and install busybox [Samsung]
* Install BusyBox on your device
* Perform a FULL NANDROID Backup of your system (Boot, Cache, Data, Recovery and System) via adb and save in Custom Recovery format on your PC which can be Restored via CWM Recovery [if insecure boot image available]
* Fix extSdCard write permissions from installed apps in Android 4.4+ [Samsung]
* Pull /data and /system folders, compress to a .tar file and save to your PC [if insecure boot image available]
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC [if insecure boot image available]
* Extras, Tips and Tricks section
* Auto Update ToolKit to latest available version at startup (professional only feature)
* Program up to 10 Quickpick slots and run them very quickly (professional only feature)
* Mods section to automatically perform certain tasks on your device
* Download Google Stock Image directly to correct ToolKit folder for extracting and flashing [Nexus]
* Check md5 of stock image to make sure downloaded file isn't corrupted before flashing [Nexus]
* Download Samsung Stock Firmware to PC for extracting and flashing via Odin [Samsung]
* Flash Custom Recovery or Google Stock Image to Device
* Rename the Recovery Restore File present on some Stock Roms
* Boot into CWM Touch, TWRP, Philz Touch Recovery or Stock Recovery without Flashing it [Nexus]
* Flash Custom Recovery to Device
* Boot [Nexus] or Flash .img Files directly from your PC
* Install a single apk or multiple apk's to your device
* Push Files from your PC to your device
* Pull Files from your device to your PC
* Disable forced encryption on Nexus6 and Nexus9 devices
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps [calls log, sms, contacts]
* Install EFS/Partition Backup/Restore app by Wanam
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Set Files Permissions on your device
* Open new Command Prompt for manual input
* Reboot device to Fastboot Mode or Android from fastboot mode [Nexus]
* Reboot device to Fastboot Mode [Nexus], Recovery, Android or Download Mode [Samsung] from adb mode
* Display Important Information about your device
--------------------------------------------------------------
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: As the exe files are not Digitally Signed with a Microsoft Certificate they 'may' get picked up as potentially harmful by Antivirus Programs and deleted on first run. If this happens restore the file and exclude it from future scans to use it. This seems to happen mostly on AVG Free and Norton which is why I switched to BitDefender which is much better.
Credits: ChainsDD for Superuser, Chainfire for SuperSU, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE YOUR DEVICE. NOTHING IS RESTRICTED.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR 'AUTO UPDATES' DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE 'QUICK PICKS' SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE "ANY BUILD" OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD (USEFUL IF YOUR BUILD IS NOT LISTED).
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
USEFUL INFORMATION
Enable Developer options for usb debugging
Go to Settings, System section, About device and tap on 'Build number' 7 times until it says you are now a developer. You can now go to Settings, System section, Developer options and enable USB debug.
How to get into Recovery Mode
1. Unplug the USB cable.
2. Shut down the device.
3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
How to get into Download Mode (For Odin)
1. Unplug the USB cable.
2. Shut down the device.
3. Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
**FAQ**
Q. Help me I can't find my build in the Model Selection Screen
The Toolkit includes a selection of Insecure Boot Images to cover all the different builds available. As there are very many different builds it is impossible to include an image for every single build but some builds share the same Boot Image. If you have a build that isnt listed on the Model Selection Screen you can therefore use a similar build. The best way to go is up to the next available build as it should offer more compatibility with the build you are using but if that isn't available then try the next build below your one as it should still be almost identical as long as it is the same version (ie. 4.1.2).
The Model Selection Screen is there so that if a task in the ToolKit requires an insecure kernel [to perform adb root commands] and your phone doesnt already include one, a compatible boot image [with an insecure kernel included] can be flashed to provide adb root access.
If you have a Custom Rom flashed to your phone then it will most probably have an insecure kernel included so it doesn't really matter if your build is not listed on the Model Selection Screen and when asked [by certain functions] if you have an insecure kernel on your phone you can answer 'yes'. However if the function fails then your kernel may not be insecure in which case you can flash one from the ToolKit. If you need to do this make sure the right build [or closest available build] is set so you flash the right image for your phone.
----------------------------------------------------------------------------
Q. What is ADB Shell?
Adb shell is a linux command line tool (because android is based on linux) used to send commands to your android device. For S-ON devices, this is crucial for modifying files in the /system partition (where the rom sits) as you cannot modify anything in /system when the rom is running without S-OFF like removing system apps.
----------------------------------------------------------------------------
Q. Why do I need to back up my IMEI/EFS and how do I do it?
There well protected section of your device that is virtually immune to any kind of flashing and manipulation (unless of course you know how to access it). This part of the device contains information such as IMEI (or MEID and ESN in the case of CDMA devices), programming parameters for the device such as your account information (phone number, etc), data provisioning parameters, and a whole bunch of other things that, when not handled properly, can render a device completely useless. All of these are contained in the infamous \EFS folder. If anything messes with your EFS folder, unlike flashing a device (which could potentially lead to bricks as well) it could render your device completely useless as it will no longer be recognized by your carrier. If you are not planning on flashing anything to your device and want to stay on pure Stock then you may never have any problems but it is still advisable to backup this information just in case (better to be safe than sorry).
This feature will be added to the Toolkit after testing has been completed.
----------------------------------------------------------------------------
Q. Does flashing a custom image increase my flash counter?
Any image that is flashed via Odin that has been modified will increase the flash counter that can be viewed in the Download Mode on your device (if booted by holding the Volume Down, Home and Power buttons). You can reset the flash counter using an app by Chainfire called Triangles Away and can find instructions on how to use that in the Downloads section in the Toolkit.
----------------------------------------------------------------------------
Q. Will flashing Stock ROM via odin using the toolkit replace everything that was flashed before? recovery? etc?
Yes a Stock Image flashed via Odin will replace all your key partitions (boot, recovery, system) with the stock firmware. If you want to reset the phone back to an 'out of the box' state then you want to enter recovery and do a wipe first which will reformat your userdata partition.
----------------------------------------------------------------------------
Q. I flashed Custom Recovery but each time I reboot the Stock Recovery is back
There is an auto recovery restore system on certain Stock Android Builds that will reflash the Stock Recovery if you flash CWM on a Stock Rom.
Use Root Explorer to Mount the system folder as R/W (or use a free app from Google Play such as ES File Explorer). Rename the files /system/recovery-from-boot.p and /system/etc/install-recovery.sh (requires root). Now when you flash Custom Recovery it will NOT be overwritten after a reboot. You can also do this via the Toolkit.
----------------------------------------------------------------------------
Q. My AntiVirus program says the Toolkit files may be harmful
The exe compiled files are not digitally signed with a Microsoft certificate (as they cost money) so certain AntiVirus programs (mainly Norton and AVG Free) may pick it up as potentially harmful when it is not. They will pick up ANY file that doesn't contain a purchased Microsoft certificate in the same way. Just Restore the deleted file and exclude it from further scans and it will be fine. Or switch to a better AntiVirus program such as BitDefender.
----------------------------------------------------------------------------
Q. I flashed the Toolkit Boot Image, now my wifi + bluetooth won't work
The boot images are made from Stock with only needed changes made to the insecure boot images [modified adbd, default.prop and rc.local edited] and will work on all stock roms. If you flash them to a custom rom and the rom has been altered or uses a custom boot image then it will boot but certain modules may not load such as wifi or bluetooth. In this case you can use the boot image to root or perform adb root functions but will need to flash back the boot image for the custom rom to get other functions working again. This is not a fault of the Toolkit but a difference to stock in the custom rom.
----------------------------------------------------------------------------
Q. I am having trouble getting adb working with the drivers installed
Try switching your connection type from media (MTP) mode to camera mode (P2P). To do this open the notification area, click where it says connected as and change from MTP to PTP.
----------------------------------------------------------------------------
Q. I want to send my device back for warranty purposes
1. Follow the instructions to reset your flash counter with TriangleAway.
2. Download and flash a Stock Firmware image from the download section.
3. Boot into Stock Recovery and perform a wipe/factory reset
.
Your internal storage will be formatted and data and cache wiped. Your device should now be back to an out-of-the-box FULLY STOCK state with the flash counter [shown if you boot to download mode manually] reset and ready to send back.
----------------------------------------------------------------------------
Q. When connecting the phone I get 'USB Device not Recognized' and no serial number shows in the ToolKit
I actually had this problem recently and what fixed it for me was to make sure that the drivers have been installed, then shut my phone down plug the usb cable in and restart it. The phone booted up and the device was recognized and drivers installed correctly. May not work for everyone but worth trying.
*reserved if needed*
Mskip
thanks for this
is your version of cwm working properly?
thanks
jocko6872 said:
Mskip
thanks for this
is your version of cwm working properly?
thanks
Click to expand...
Click to collapse
I think that's for us us to test and tell him
sefrcoko said:
I think that's for us us to test and tell him
Click to expand...
Click to collapse
It's the same version as provided in the development thread.
i flashed the cwm
but cant do anything
cant even reboot
jocko6872 said:
Mskip
thanks for this
is your version of cwm working properly?
thanks
Click to expand...
Click to collapse
CWM is the experimental port from emwno in *THIS* thread.
I need people to test if the insecure boot image flashes and whether the root process works.
Mark.
madsatan said:
i flashed the cwm
but cant do anything
cant even reboot
Click to expand...
Click to collapse
Flashing custom recovery shouldnt affect the boot process have you tried just holding the power button for about 15 seconds to force a hard reboot?
Are there any lights or anything on the screen?
Mark.
Sorry that i didnt make myself clear
What i was saying is that i boot into cwm
Cant press any fuctions (cant back up or reboot etc)
I had to use power buttom to restar the tablet
Sent from my GT-N5110 using XDA Premium HD app
madsatan said:
Sorry that i didnt make myself clear
What i was saying is that i boot into cwm
Cant press any fuctions (cant back up or reboot etc)
I had to use power buttom to restar the tablet
Sent from my GT-N5110 using XDA Premium HD app
Click to expand...
Click to collapse
As stated the cwm port is still experimental but it is being worked on by emwno and im sure he will get there.
Has anyone tried the root procedure yet with the insecure boot image? I really need some feedback here.
Mark.
Hey mskip,i just downloaded the toolkit and went through the insecure kernel process with no problems,tho i had already rooted using the Framaroot app. I also installed cwm and booted into it,although it's a little buggy it's useable ,just need something to flash in it now
ktmman said:
Hey mskip,i just downloaded the toolkit and went through the insecure kernel process with no problems,tho i had already rooted using the Framaroot app. I also installed cwm and booted into it,although it's a little buggy it's useable ,just need something to flash in it now
Click to expand...
Click to collapse
Glad its all working ok. Did you go through the ALL-IN-ONE process? Just wondering if you had installed busybox as I need someone to make a NAND backup from the backups section. If you can do that and then post a screenshot of the files (filenames and file sizes) then I can update it to a public version
Mark.
mskip said:
Glad its all working ok. Did you go through the ALL-IN-ONE process? Just wondering if you had installed busybox as I need someone to make a NAND backup from the backups section. If you can do that and then post a screenshot of the files (filenames and file sizes) then I can update it to a public version
Mark.
Click to expand...
Click to collapse
ok,i downloaded Busybox from the market,it looks like its going well,here's the data.
ktmman said:
ok,i downloaded Busybox from the market,it looks like its going well,here's the data.
Click to expand...
Click to collapse
Looks good
Now I just need someone with a full stock firmware flashed that can test the ALL IN ONE process and perform a NAND backup to make sure it works from scratch. Any takers?
Mark.
I will try once I'm home
Sent from my GT-N5110 using Tapatalk HD
n5120
got n5120, lte. can I use tools or I have to wait for n5120 version?
thanx in advance for answer.
goo.im seems to be down. Got a mirror?
thanks mskip
i use your nexus 4 tool kit a lot and was excited to see this one
i had already rooted via the framaroot app. was able to successfully load up CWM recovery (although it needs some help but i see in the other thread its being worked on).
also ran a backup successfully.
Sardo Numspa said:
thanks mskip
i use your nexus 4 tool kit a lot and was excited to see this one
i had already rooted via the framaroot app. was able to successfully load up CWM recovery (although it needs some help but i see in the other thread its being worked on).
also ran a backup successfully.
Click to expand...
Click to collapse
Flash Experimental #4 for your specific device (from my thread). Its working properly now.
[TOOLKIT] UNIFIED ANDROID TOOLKIT - SAMSUNG GALAXY TAB S - Drivers, Root, Recovery + MORE
SUPPORTED MODELS/VARIANTS
GALAXY TAB S 8.4 [KLIMT]
WIFI ONLY MODEL [SM-T700]
LTE/WIFI MODEL [SM-T705]
LTE/WIFI CANADA MODEL [SM-T705W]
LTE/WIFI S AMERICA MODEL [SM-T705M]
GALAXY TAB S 10.5 [CHAGALL]
WIFI ONLY MODEL [SM-P800]
LTE/WIFI MODEL [SM-T805]
LTE/WIFI CANADA MODEL [SM-T805W]
LTE/WIFI S AMERICA MODEL [SM-T805M]
The Unified Android Toolkit brings together all the Nexus and Samsung Toolkits and supports many Nexus and Samsung devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
FUNCTIONS OF UNIFIED ANDROID TOOLKIT
* Install correct adb/fastboot drivers automatically on Windows xp/vista/7/8 32bit+64bit/Windows 10
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your data from selectable folders [internal or external storage] to your PC for a Full Safe backup of data
* Unlock/Re-Lock your Bootloader [Nexus]
* Root Stock builds
* Various Root options using insecure boot image or custom recovery
* ALLINONE to Unlock, Root, Rename the Restore Files and install busybox [Nexus]
* ALLINONE to flash custom Recovery Root, Rename the Restore Files and install busybox [Samsung]
* [NEW] use SkipRoot boot image to Auto Root device, install Busybox Binaries and rename Recovery Restore files [selected devices]
* Install BusyBox on your device
* Perform a FULL NANDROID Backup of your system (Boot, Cache, Data, Recovery and System) via adb and save in Custom Recovery format on your PC which can be Restored via CWM Recovery [if insecure boot image available]
* Fix extSdCard write permissions from installed apps in Android 4.4+ [Samsung]
* Pull /data and /system folders, compress to a .tar file and save to your PC [if insecure boot image available]
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC [if insecure boot image available]
* Extras, Tips and Tricks section
* Auto Update ToolKit to latest available version at startup (professional only feature)
* Program up to 10 Quickpick slots and run them very quickly (professional only feature)
* Mods section to automatically perform certain tasks on your device
* Download Google Stock Image directly to correct ToolKit folder for extracting and flashing [Nexus]
* Check md5 of stock image to make sure downloaded file isn’t corrupted before flashing [Nexus]
* Download Samsung Stock Firmware to PC for extracting and flashing via Odin [Samsung]
* Flash Custom Recovery or Google Stock Image to Device
* Flash any part of a stock Nexus image to device [boot, system, recovery] – Great for fixing broken parts of firmware
* Rename the Recovery Restore File present on some Stock Roms
* Boot into CWM Touch, TWRP, Philz Touch Recovery or Stock Recovery without Flashing it [Nexus]
* Flash Custom Recovery to Device
* Boot [Nexus] or Flash .img Files directly from your PC
* Install a single apk or multiple apk’s to your device
* Push Files from your PC to your device
* Pull Files from your device to your PC
* Disable forced encryption on Nexus6 and Nexus9 devices
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps [calls log, sms, contacts]
* Install EFS/Partition Backup/Restore app by Wanam
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Set Files Permissions on your device
* Open new Command Prompt for manual input
* Reboot device to Fastboot Mode or Android from fastboot mode [Nexus]
* Reboot device to Fastboot Mode [Nexus], Recovery, Android or Download Mode [Samsung] from adb mode
* Display Important Information about your device
--------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------
SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some ‘may’ get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.
Credits: ChainsDD for Superuser, Chainfire for SuperSU and kernel patches, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, NextApp for the SD Fix app, fOmey for TWRP for the Galaxy Gear.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE AND ROOT YOUR DEVICE.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR ‘AUTO UPDATES’ DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE ‘QUICK PICKS’ SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE “ANY BUILD” OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD AS LONG AS THE VERSION IS SUPPORTED (USEFUL IF YOUR BUILD IS NOT LISTED).
MORE IMPORTANTLY DONATING SHOWS YOUR APPRECIATION AND ALLOWS THE TOOLKIT TO CONTINUE TO EVOLVE AND GROW.
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
USEFUL INFORMATION
How to Hard Reboot the device
1. Unplug the USB cable.
2. Hold down the 'VOLUME DOWN' + 'POWER' buttons for about 5-15 seconds until the device reboots
How to get into Recovery Mode
1. Unplug the USB cable.
2. Hold down the 'HOME' + 'VOLUME UP' + 'POWER' buttons for about 5-15 seconds until you see the Samsung logo on the screen.
3. Release all buttons straight away to enter Recovery Mode.
How to get into Download Mode (For Odin)
1. Unplug the USB cable.
2. Hold down the 'HOME' + 'VOLUME DOWN' + 'POWER' buttons for about 2-15 seconds until a WARNING! Screen appears.
3. Press the 'VOLUME UP' button to enter Download Mode.
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by using the Unified Android Toolkit. No warranties of any kind are given.
**UPDATES**
**VIDEOS**
**FAQ**
Q. Help me I can't find my build in the Model Selection Screen
The Toolkit includes a selection of Insecure Boot Images to cover all the different builds available. As there are very many different builds it is impossible to include an image for every single build but some builds share the same Boot Image. If you have a build that isnt listed on the Model Selection Screen you can therefore use a similar build. The best way to go is up to the next available build as it should offer more compatibility with the build you are using but if that isn't available then try the next build below your one as it should still be almost identical as long as it is the same version (ie. 4.1.1).
The Model Selection Screen is there so that if a task in the ToolKit requires an insecure kernel [to perform adb root commands] and your phone doesnt already include one, a compatible boot image [with an insecure kernel included] can be flashed to provide adb root access.
If you have a Custom Rom flashed to your phone then it will most probably have an insecure kernel included so it doesn't really matter if your build is not listed on the Model Selection Screen and when asked [by certain functions] if you have an insecure kernel on your phone you can answer 'yes'. However if the function fails then your kernel may not be insecure in which case you can flash one from the ToolKit. If you need to do this make sure the right build [or closest available build] is set so you flash the right image for your phone.
----------------------------------------------------------------------------
Q. What is ADB Shell?
Adb shell is a linux command line tool (because android is based on linux) used to send commands to your android device. For S-ON devices, this is crucial for modifying files in the /system partition (where the rom sits) as you cannot modify anything in /system when the rom is running without S-OFF like removing system apps.
----------------------------------------------------------------------------
Q. Why do I need to back up my IMEI/EFS and how do I do it?
There well protected section of your device that is virtually immune to any kind of flashing and manipulation (unless of course you know how to access it). This part of the device contains information such as IMEI (or MEID and ESN in the case of CDMA devices), programming parameters for the device such as your account information (phone number, etc), data provisioning parameters, and a whole bunch of other things that, when not handled properly, can render a device completely useless. All of these are contained in the infamous \EFS folder. If anything messes with your EFS folder, unlike flashing a device (which could potentially lead to bricks as well) it could render your device completely useless as it will no longer be recognized by your carrier. If you are not planning on flashing anything to your device and want to stay on pure Stock then you may never have any problems but it is still advisable to backup this information just in case (better to be safe than sorry).
----------------------------------------------------------------------------
Q. Does flashing a custom image increase my flash counter?
Any image that is flashed via Odin that has been modified will increase the flash counter that can be viewed in the Download Mode on your device (if booted by holding the Volume Down, Home and Power buttons). You can reset the flash counter using an app by Chainfire called Triangles Away and can find instructions on how to use that in the Downloads section in the Toolkit.
----------------------------------------------------------------------------
Q. Will flashing Stock ROM via odin using the toolkit replace everything that was flashed before? recovery? etc?
Yes a Stock Image flashed via Odin will replace all your key partitions (boot, recovery, system) with the stock firmware. If you want to reset the phone back to an 'out of the box' state then you want to enter recovery and do a wipe first which will reformat your userdata partition.
----------------------------------------------------------------------------
Q. I flashed Custom Recovery but each time I reboot the Stock Recovery is back
There is an auto recovery restore system on certain Stock Android Builds that will reflash the Stock Recovery if you flash CWM on a Stock Rom.
Use Root Explorer to Mount the system folder as R/W (or use a free app from Google Play such as ES File Explorer). Rename the files /system/recovery-from-boot.p and /system/etc/install-recovery.sh (requires root). Now when you flash Custom Recovery it will NOT be overwritten after a reboot. You can also do this via the Toolkit.
----------------------------------------------------------------------------
Q. My AntiVirus program says the Toolkit files may be harmful
The exe compiled files are not digitally signed with a Microsoft certificate (as they cost money) so certain AntiVirus programs (mainly Norton and AVG Free) may pick it up as potentially harmful when it is not. They will pick up ANY file that doesn't contain a purchased Microsoft certificate in the same way. Just Restore the deleted file and exclude it from further scans and it will be fine. Or switch to a better AntiVirus program such as BitDefender.
----------------------------------------------------------------------------
Q. I flashed the Toolkit Boot Image, now my wifi + bluetooth won't work
The boot images are made from Stock with only needed changes made to the insecure boot images [modified adbd, default.prop and rc.local edited] and will work on all stock roms. If you flash them to a custom rom and the rom has been altered or uses a custom boot image then it will boot but certain modules may not load such as wifi or bluetooth. In this case you can use the boot image to root or perform adb root functions but will need to flash back the boot image for the custom rom to get other functions working again. This is not a fault of the Toolkit but a difference to stock in the custom rom.
----------------------------------------------------------------------------
Q. I am having trouble getting adb working with the drivers installed
Try switching your connection type from media (MTP) mode to camera mode (P2P). To do this open the notification area, click where it says connected as and change from MTP to PTP.
----------------------------------------------------------------------------
Q. I want to send my device back for warranty purposes
1. Follow the instructions to reset your flash counter with TriangleAway.
2. Download and flash a Stock Firmware image from the download section.
3. Boot into Stock Recovery and perform a wipe/factory reset
.
Your internal storage will be formatted and data and cache wiped. Your device should now be back to an out-of-the-box FULLY STOCK state with the flash counter [shown if you boot to download mode manually] reset and ready to send back.
----------------------------------------------------------------------------
Q. When connecting the phone I get 'USB Device not Recognized' and no serial number shows in the ToolKit
I actually had this problem recently and what fixed it for me was to make sure that the drivers have been installed, then shut my phone down plug the usb cable in and restart it. The phone booted up and the device was recognized and drivers installed correctly. May not work for everyone but worth trying.
----------------------------------------------------------------------------
Q. "Superuser/SuperSU has stopped" message after rooting
After updating Samsung device to newer builds of Android [4.3 and later] which contains the new security from Samsung "Samaung KNOX", you might face a problem if you tried to root your device.
This might happen because of KNOX security, it blocks/disables the Superuser app and you will see this notification after the first boot:
"Unfortunately, SuperSU has stopped" or "Unfortunately, Superuser has stopped" depending on the root method you used.
The easiest way to fix this problem is by installing the superuser apk file. Select option 6 from the Rooting Section and the Toolkit will attempt to extract the superuser.apk file from the root zip file in the Root folder and if successful it will then be installed. You can then run the app [Superuser or SuperSU] from the apps list. A warning message will pop up saying Samsung KNOX has been detected and ask if you want to try and disable it. Click OK, KNOX should be disabled and your device should now be properly rooted.
Cool thing remember you from the Hd2 Era
Thanks for porting your tookit over to support our devices. Will be very useful for many
Cheers,
UITA
JUNEBUG-1 said:
Cool thing remember you from the Hd2 Era
Click to expand...
Click to collapse
yes I recall too..great work mskip!
---------- Post added at 08:36 PM ---------- Previous post was at 08:33 PM ----------
mskip..you may want to add that the NA models of the 705 and maybe 805 too cannot make cellular calls even though have LTE data...there have been several threads on this..most recent one in the original development section posed as a question..
this was discussed here already clarified by oldblue (am sure elsewhere too)
http://forum.xda-developers.com/galaxy-tab-s/general/pre-galaxy-tab-s-att-t2881310
http://forum.xda-developers.com/showpost.php?p=56084215&postcount=44
Thanks for your work!
Thanks for the Kit,
I'm looking for a perfectly stable ROM for Tab S 8.4 SM700. The only ROM I saw that seems stable is Iron-man. Are there any other ROM stable for SM 700?
Amazing job!
Thank you very much.
Thanks for this toolkit and for replying to my email, all working ok now.:good:
Does this tool support the SM-T800NTSSXAR ? ( 16GB Wifi US Model - also know as just the SM-T800 )?
ClockerXP said:
Does this tool support the SM-T800NTSSXAR ? ( 16GB Wifi US Model - also know as just the SM-T800 )?
Click to expand...
Click to collapse
Yes. I think there is a typo in the toolkit. It should say SMT800 instead of SMP800
Donated & THANK YOU!
Hi. Thanks for the tool, I'm looking for the root access and I'm wondering if your tool can support the newer version of Tab S 10.5 based on 5433 SoC (i.e., SM-T805K)
http://pdadb.net/index.php?m=specs&...b_s_10.5-inch_broadband_lte-a_samsung_chagall
I have this 5433 model from Korea, which the shell cmd tells me this: chagall. I could not find any root tools for this.
many thanks
Howdy-
I donated so that I could use this toolkit with my Tab S. Works great.
I also made another donation so I could use the Pro version with my Galaxy S4. Unfortunately, when the Pro version loaded up I saw it doesn't support the SCHi545 Verizon version of the phone. I immediately emailed the tool author to see if he would send back my extra donation since I could not actually use the tool for the S4 and because I had already donated for the Tab S. Been over a day and no response. I got the activation code within minutes but no reply the other way around.
I have a question, this root changes Knox to "1"???
Hi guys,
what's the meaning of [KLIMT] in "GALAXY TAB S 8.4 [KLIMT]" pl?
I hate to root my GALAXY TAB S 8.4 WIFI,16G0, is it ok with your tools?
Ths for you answer, good job!
B
Bishopandme said:
Hi guys,
what's the meaning of [KLIMT] in "GALAXY TAB S 8.4 [KLIMT]" pl?
I hate to root my GALAXY TAB S 8.4 WIFI,16G0, is it ok with your tools?
Ths for you answer, good job!
B
Click to expand...
Click to collapse
klimt is the models of the tab s 8.4. Your exact model is SMT700 so Im pretty sure it should work. Hope this helps!
Just got done trying to root and install twrp recovery on the tab s 10.5 wifi and I can get into recovery that worked bu the device is not rooted. twrp installed supersu and then I started it and it preceded to to an update. So I go to start supersu and it give me this message
There is no SU binary installed and supersu cannot install it
Any ideas. I have rooted lots of devices and have never seen this.
Thanks.
kendive said:
Just got done trying to root and install twrp recovery on the tab s 10.5 wifi and I can get into recovery that worked bu the device is not rooted. twrp installed supersu and then I started it and it preceded to to an update. So I go to start supersu and it give me this message
There is no SU binary installed and supersu cannot install it
Any ideas. I have rooted lots of devices and have never seen this.
Thanks.
Click to expand...
Click to collapse
Download a zip(google it) called supersu.zip then flash it with twrp and you will have root.
Hey folks,
I did something and now nothing works anymore. Please help me.
Okay here a more detailled overview of what I did:
- unlocked bootloader successfully (incl. the update to ver 3.5.259ST as described in https://forum.xda-developers.com/zuk-z2-pro/how-to/ota-collection-howto-zui-1-9-to-zui-z2-t3928693)
- flashed TWRP (latest) successfully (still working)
- copied some stuff (custom rom and gapps) into the root via usb
- wiped everything on my phone, since I didnt had access to /sdcard from TWRP filemanager
Well and there we go. I am able to:
- get into TWRP
but I am not able to:
- install anything because there is nothing on my phone (since I wiped everything)
- boot (bc Ill get stuck at the ZUK screen, since I wiped everything)
- import files to my zuk2 filesystem (I dont get any message on windows, that I connected something, if I'm not on a running ROM)
Sooo.. does anyone has any idea how I can solve this? I just need to get files on my ZUK so I tried to install drivers (unsuccessful) for USB connection. But maybe I got the wrong ones? (The ZUK driver I tried - no idea how to install the qualcomm one)
I hope you can help me with my broken phone. Thank you so much!
Come on.
Download the rom files, if you haven't changed vendos and factory, you can go with AEX with android 9, which I think is very good, otherwise it goes with android 8.
Download arm64, pico gapps, according to the android version to be installed.
I copied it to a pendrive, and with a usbc / usb cable, plug in the zuk z2 pro, access the bootloader, install option, select the OTG storage access, it will access the files on the pendrive.
Now you can flash the ROM and then the Gapps.
I recommend doing wipe cache, system before.
Or qfil it and restart from a stock factory rom...
(then install twrp again and whichever rom u want.)
I have purchased my Samsung S10 Exynos and successfully rooted it using the only possible ways that have seems to be available so far. I have gained root, but I was wondering if anyone has solved the issue of having to turn the device on with all 3 keys held down at the same time. I understand that this is because the rooted version of the phone has be installed on the recovery of the phone, but I hope that there becomes a way to turn on the phone with root and use only the power button. I check from time to time, but it seems that this has not been solved yet. If anyone can find a solution for me so that I do not have to keep searching then I will reward them $100. An idea that I had is if there was a way to modify the power button to boot into recovery by itself? I believe this would be impossible but if anyone could think of a way to do that then that would solve the problem. I am okay with never being able to unroot the device if this would be the case.
How often do you cold boot?
reboot:
- Magisk boot menu
- adb reboot recovery
DHGE said:
How often do you cold boot?
reboot:
- Magisk boot menu
- adb reboot recovery
Click to expand...
Click to collapse
Hello, thank you for the suggestion. I thought about that idea already and I forgot to mention it in my post. I am looking for a way to do it via a cold boot. I know about the reboot into recovery method already, and I know of a way to map the power button to reboot into recovery if held down, but I am looking for a way to cold boot into recovery with just the power button.
I like your idea, but if there was a way to do it as a cold boot then that is ideally what I'm looking for. Your method would work if there was a way to just keep the phone shut down and wait until I hold the power button to turn it on and then it boot into recovery. If you can think of a way to do that then let me know.
The reason I am seeking this is because I root the S10 out to have a proprietary app on it and the app requires root to function properly. I need the power button to boot with root on the S10 so that it will always do so and my employees / customers will not access the non-rooted side of the phone by accident. The 3 button combination is too difficult, so I would need to resort so either a S8 or S9 if the S10 won't allow power button only to boot with root access. The app that I make uses a great amount of battery life so I need the ability to shut down the phone and cold boot it back into recovery. Thanks.
Hi, I assume you have rooted using the magisk-patched-recovery method (patched AP file) and if memory serves and from what I am re-reading this method does require the 3-button-combo to boot to rooted system.
When I first got my s10 and rooted this was the only method at the time, but then came custom kernels with built-in magisk.
With this method from power menu if I...
- reboot, phone will reboot to rooted system.
- power off, the power on button will boot to rooted system.
In fact I'm not sure how/if I can boot to non-rooted system with this method.
I currently on custom rom AmbasadiiRom 2.2 with AmbasadiiCruel Kernel G97xF-v3.10.
There are a few custom kernels that have built-in magisk. You will have to check rom compatibility but believe they work on samsung stock based firmware/roms, AmbasadiRomi is based on stock firmware.
- Cruel Kernel
- ThundeRStormS kernel
If you like I can provide a step-by-step, but you will lose all data as it will require flashing stock unpatched firmware, unpatched twrp in odin then custom rom (optional - depending on if the custom kernel does work on stock firmware) & custom kernel.
pjc21 said:
Hi, I assume you have rooted using the magisk-patched-recovery method (patched AP file) and if memory serves and from what I am re-reading this method does require the 3-button-combo to boot to rooted system.
When I first got my s10 and rooted this was the only method at the time, but then came custom kernels with built-in magisk.
With this method from power menu if I...
- reboot, phone will reboot to rooted system.
- power off, the power on button will boot to rooted system.
In fact I'm not sure how/if I can boot to non-rooted system with this method.
I currently on custom rom AmbasadiiRom 2.2 with AmbasadiiCruel Kernel G97xF-v3.10.
There are a few custom kernels that have built-in magisk. You will have to check rom compatibility but believe they work on samsung stock based firmware/roms, AmbasadiRomi is based on stock firmware.
- Cruel Kernel
- ThundeRStormS kernel
If you like I can provide a step-by-step, but you will lose all data as it will require flashing stock unpatched firmware, unpatched twrp in odin then custom rom (optional - depending on if the custom kernel does work on stock firmware) & custom kernel.
Click to expand...
Click to collapse
Awesome. Your solution sounds perfect for what I was looking for. Yes, I got my S10 back over a year ago and rooted it with patched AP file and magisk. I was only able to find that method even up until yesterday. I would like a step by step if you are able to quickly put one together. If it works then I am glad to grant you the reward for your help. I am willing to do this in the easiest way possible, even if it requires wiping data. I never used the phone so wiping is no problem at all. I am looking to do this to several devices so the easiest and fastest way would be the best. I will look into your comments and see if I can figure out doing this over this weekend. Will keep everyone updated.
pjc21 said:
Hi, I assume you have rooted using the magisk-patched-recovery method (patched AP file) and if memory serves and from what I am re-reading this method does require the 3-button-combo to boot to rooted system.
When I first got my s10 and rooted this was the only method at the time, but then came custom kernels with built-in magisk.
With this method from power menu if I...
- reboot, phone will reboot to rooted system.
- power off, the power on button will boot to rooted system.
In fact I'm not sure how/if I can boot to non-rooted system with this method.
I currently on custom rom AmbasadiiRom 2.2 with AmbasadiiCruel Kernel G97xF-v3.10.
There are a few custom kernels that have built-in magisk. You will have to check rom compatibility but believe they work on samsung stock based firmware/roms, AmbasadiRomi is based on stock firmware.
- Cruel Kernel
- ThundeRStormS kernel
If you like I can provide a step-by-step, but you will lose all data as it will require flashing stock unpatched firmware, unpatched twrp in odin then custom rom (optional - depending on if the custom kernel does work on stock firmware) & custom kernel.
Click to expand...
Click to collapse
I just read some info on the links you provided and i think i can figure it out. if i have any trouble then ill let you know. Dont worry about a step by step for now unless I have any trouble. Thanks!
Here is a bit of a step-by-step for Samsung s10 Exynos Model:SM-G973F
Info below is based on using December Security patch: 2020-12-01 firmware G973FXXS9DTK9 (Android 10) and Ambasadii Rom
NOTICE: The easiest and fastest way would probably be flashing kernel with stock firmware/rom. I have only done custom (but stock based) roms with kernel so am assuming the steps (5a.) for stock firmware/rom, you may want to post in chosen kernel thread to confirm if those steps are correct.
- both kernels I mentioned say they are compatibly with stock roms & AmbasadiiCruel Kernel is based on Cruel Kernel so I assume that would also work on stock rom.
This assumes you have already unlocked your bootloader, if not check this Recovery thread under Instructions: Odin (windows) - steps 1-6 for how to unlock bootloader.
1. Download all files needed to pc.
- Current latest firmware G973FXXS9DTK9, I use frija tool as downloading from samfirmware.com is very slow.
Enter Model, CSC, check the auto box & click check update and download.
Once complete unzip with 7Zip or preferred zip tool.
- In Recovery thread download latest twrp for device, is this case for S10 G973F latest twrp is - twrp-3.5.0_9-1-beyond1lte.img.tar
Under Instructions: Odin (windows) download
- Odin v3.14.1
- avb disabled vbmeta.tar
- click link to multidisabler-samsung-2.* and download latest version from there, currently multidisabler-samsung-3.1.zip
If sticking with stock and custom kernel
- easiest one looks like it would be Cruel kernel or AmbasadiiCruel kernel.
- check kernel thread of choice for compatibility with stock firmware and specific install instructions.
For custom rom in this example for Ambasadii rom
- Download files from Ambasadii rom site
- ROM.G97xF.XXS9DTK9-v2.2.by.ambasadii.zip
- mods_DTJA-v1.3.4.zip
- magisk_safetynet_fix.zip
- AmbasadiiCruel-G97xF-v3.10.zip (rom does include previous kernel 3.9 but this one is updated to latest magisk 21.2)
Bootlogo patcher - this will get rid of the warning about bootloader being unlocked when booting phone. (optional)
TWRP_Bootlogo_patcher.zip
Copy the below files to phones external SDCard
- multidisabler-samsung-3.1.zip
- TWRP_Bootlogo_patcher.zip (optional)
- chosen kernel zip - if sticking with stock
Custom Rom files
- ROM.G97xF.XXS9DTK9-v2.2.by.ambasadii.zip
- mods_DTJA-v1.3.4.zip
- magisk_safetynet_fix.zip
- AmbasadiiCruel-G97xF-v3.10.zip
2. Flashing stock firmware - Odin
- Open Odin on pc
- Turn off the phone
- Use vol down + bixby, then connect usb cable to phone from pc to start the phone in download mode, press vol up to confirm and go to download mode.
- In Odin under log you should see added, I also like to turn off auto reboot under the options tab and do manual reboot once complete but that's up to you.
- Add BL, AP, CP & CSC from the unzipped firmware downloaded in step 1. The AP & CSC can take a little time as they are larger files.
- Once all files added click start and wait until complete, you should see SUCCESS in the top left area once done.
- If you turned off auto-reboot then unplug usb and do manual reboot by pressing vol down + power for 7 seconds, else phone should reboot automatically then unplug.
3. Once phone boots up
- complete setup and connect to Wi-Fi or data
- skip adding Google & Samsung accounts.
- enable developer settings & check OEM unlock is on.
- turn off the phone.
4. Flashing TWRP Recovery - Odin
- In the Recovery thread under Instructions: Odin (windows) continue on from step 8 including formatting data and flashing multidisabler zip which you copied to SDCard.
- in twrp go back to wipe and select advanced and wipe data, cache & dalvik-cache
5a. If sticking with stock & custom kernel - Read NOTICE at top of post
Assumed Steps
- Still in twrp recovery go back to main menu
- select install and flash kernel zip, then TWRP_Bootlogo_patcher.zip
- Not sure if magisk_safetynet_fix is needed or works on stock, would need to confirm in Ambasadii thread.
- go back to main menu and select reboot & system
- give the phone a few minutes to start, and then complete setup including adding your accounts.
- once setup is complete open magisk and it will run additional setup, and then phone will reboot
- done
OR
5b. If flashing Custom Rom & Kernel - steps below for Ambasadii Rom
- Still in twrp recovery go back to main menu
- select install and flash ROM.G97xF.XXS9DTK9-v2.2.by.ambasadii.zip, choose options in aroma - once the install is complete exit back to twrp recovery
- select and flash mods_DTJA-v1.3.4.zip, then magisk_safetynet_fix.zip, then AmbasadiiCruel-G97xF-v3.10.zip, then TWRP_Bootlogo_patcher.zip
- once you have flashed all files go back to main menu and select reboot & system
- give the phone about 8 minutes to start, and then complete setup including adding your accounts.
- once setup is complete open magisk and it will run additional setup, and then phone will reboot
- done
6. If you went with Ambasadii Rom
- you will then notice status bar icons are pushed to the right behind the camera
- open rom control, grant superuser rights
- select status bar/options and play around with notch adjustments and positions
- can be a little confusing to start but play around and you'll get the hang of it.
Hope this info helps, let me know if you need any clarification/detail to any of the steps
Also no need for reward, happy to help
pjc21 said:
Here is a bit of a step-by-step for Samsung s10 Exynos Model:SM-G973F
Info below is based on using December Security patch: 2020-12-01 firmware G973FXXS9DTK9 (Android 10) and Ambasadii Rom
NOTICE: The easiest and fastest way would probably be flashing kernel with stock firmware/rom. I have only done custom (but stock based) roms with kernel so am assuming the steps (5a.) for stock firmware/rom, you may want to post in chosen kernel thread to confirm if those steps are correct.
- both kernels I mentioned say they are compatibly with stock roms & AmbasadiiCruel Kernel is based on Cruel Kernel so I assume that would also work on stock rom.
This assumes you have already unlocked your bootloader, if not check this Recovery thread under Instructions: Odin (windows) - steps 1-6 for how to unlock bootloader.
1. Download all files needed to pc.
- Current latest firmware G973FXXS9DTK9, I use frija tool as downloading from samfirmware.com is very slow.
Enter Model, CSC, check the auto box & click check update and download.
Once complete unzip with 7Zip or preferred zip tool.
- In Recovery thread download latest twrp for device, is this case for S10 G973F latest twrp is - twrp-3.5.0_9-1-beyond1lte.img.tar
Under Instructions: Odin (windows) download
- Odin v3.14.1
- avb disabled vbmeta.tar
- click link to multidisabler-samsung-2.* and download latest version from there, currently multidisabler-samsung-3.1.zip
If sticking with stock and custom kernel
- easiest one looks like it would be Cruel kernel or AmbasadiiCruel kernel.
- check kernel thread of choice for compatibility with stock firmware and specific install instructions.
For custom rom in this example for Ambasadii rom
- Download files from Ambasadii rom site
- ROM.G97xF.XXS9DTK9-v2.2.by.ambasadii.zip
- mods_DTJA-v1.3.4.zip
- magisk_safetynet_fix.zip
- AmbasadiiCruel-G97xF-v3.10.zip (rom does include previous kernel 3.9 but this one is updated to latest magisk 21.2)
Bootlogo patcher - this will get rid of the warning about bootloader being unlocked when booting phone. (optional)
TWRP_Bootlogo_patcher.zip
Copy the below files to phones external SDCard
- multidisabler-samsung-3.1.zip
- TWRP_Bootlogo_patcher.zip (optional)
- chosen kernel zip - if sticking with stock
Custom Rom files
- ROM.G97xF.XXS9DTK9-v2.2.by.ambasadii.zip
- mods_DTJA-v1.3.4.zip
- magisk_safetynet_fix.zip
- AmbasadiiCruel-G97xF-v3.10.zip
2. Flashing stock firmware - Odin
- Open Odin on pc
- Turn off the phone
- Use vol down + bixby, then connect usb cable to phone from pc to start the phone in download mode, press vol up to confirm and go to download mode.
- In Odin under log you should see added, I also like to turn off auto reboot under the options tab and do manual reboot once complete but that's up to you.
- Add BL, AP, CP & CSC from the unzipped firmware downloaded in step 1. The AP & CSC can take a little time as they are larger files.
- Once all files added click start and wait until complete, you should see SUCCESS in the top left area once done.
- If you turned off auto-reboot then unplug usb and do manual reboot by pressing vol down + power for 7 seconds, else phone should reboot automatically then unplug.
3. Once phone boots up
- complete setup and connect to Wi-Fi or data
- skip adding Google & Samsung accounts.
- enable developer settings & check OEM unlock is on.
- turn off the phone.
4. Flashing TWRP Recovery - Odin
- In the Recovery thread under Instructions: Odin (windows) continue on from step 8 including formatting data and flashing multidisabler zip which you copied to SDCard.
- in twrp go back to wipe and select advanced and wipe data, cache & dalvik-cache
5a. If sticking with stock & custom kernel - Read NOTICE at top of post
Assumed Steps
- Still in twrp recovery go back to main menu
- select install and flash kernel zip, then TWRP_Bootlogo_patcher.zip
- Not sure if magisk_safetynet_fix is needed or works on stock, would need to confirm in Ambasadii thread.
- go back to main menu and select reboot & system
- give the phone a few minutes to start, and then complete setup including adding your accounts.
- once setup is complete open magisk and it will run additional setup, and then phone will reboot
- done
OR
5b. If flashing Custom Rom & Kernel - steps below for Ambasadii Rom
- Still in twrp recovery go back to main menu
- select install and flash ROM.G97xF.XXS9DTK9-v2.2.by.ambasadii.zip, choose options in aroma - once the install is complete exit back to twrp recovery
- select and flash mods_DTJA-v1.3.4.zip, then magisk_safetynet_fix.zip, then AmbasadiiCruel-G97xF-v3.10.zip, then TWRP_Bootlogo_patcher.zip
- once you have flashed all files go back to main menu and select reboot & system
- give the phone about 8 minutes to start, and then complete setup including adding your accounts.
- once setup is complete open magisk and it will run additional setup, and then phone will reboot
- done
6. If you went with Ambasadii Rom
- you will then notice status bar icons are pushed to the right behind the camera
- open rom control, grant superuser rights
- select status bar/options and play around with notch adjustments and positions
- can be a little confusing to start but play around and you'll get the hang of it.
Hope this info helps, let me know if you need any clarification/detail to any of the steps
Also no need for reward, happy to help
Click to expand...
Click to collapse
Hey There, Been busy lately and I haven't gotten around to trying any of these methods until today. Today I attempted the stockrom+CruelKernel. I am having a strange problem. I am acquiring root but as a read-only. I can not make any changes to system files, I can only view them. Can you tell me if you are able to modify or add to the system directory? Let me know. I know your phone is running custom rom + custom kernel, so I just might have to do that if that is the only fix. I have tried several things and read all of the threads but can not find anyone else that is experiencing this issue / I can not find a fix. I'm about to try the custom rom (stock based) + custom kernel to see if that works. If you can tell me if you have access to read/write system files then let me know so I know if this is even possible. Thanks.
I have found out that I can modify system files through twrp recovery, but when I boot into the main operating system then I have root but as read-only.
Hey, sorry for late reply - ever since xda updated it's not sending me emails when I get a notification.
As for the system directory being read-only, I believe this is normal even with root. Root just gives access to the /root dir that you would not normally have without it.
- my system dir permissions by default are 755/rwxr-xr-x
After a bit of searching looks like there are a few ways to change permissions
- twrp, can mount system as r,w - but as you said this reverts on reboot
- adb shell, and chmod permissions, same why you do with linux
- in android using either root explorer or x-plore, haven't tried root explorer as it is a paid app but did test with x-plore and working fine.
check this vid on changing the root access to superuser+mount writable which allows for changes in read-only folders and how to set permissions for files/folders.
I not sure if changing permissions on the system folder itself is safe or would cause any issues, I just created a folder within system and set permissions to 644 reclusive, created some files and rebooted - created folders/files and modified permissions remained fine after reboot.
If you need write permissions in system to install apps as system/app you may find this magisk module useful, it's called App Systemizer which allows you to use apps as system apps systemlessly. Just search in magisk modules.
Hope this helps.
pjc21 said:
Hey, sorry for late reply - ever since xda updated it's not sending me emails when I get a notification.
As for the system directory being read-only, I believe this is normal even with root. Root just gives access to the /root dir that you would not normally have without it.
- my system dir permissions by default are 755/rwxr-xr-x
After a bit of searching looks like there are a few ways to change permissions
- twrp, can mount system as r,w - but as you said this reverts on reboot
- adb shell, and chmod permissions, same why you do with linux
- in android using either root explorer or x-plore, haven't tried root explorer as it is a paid app but did test with x-plore and working fine.
check this vid on changing the root access to superuser+mount writable which allows for changes in read-only folders and how to set permissions for files/folders.
I not sure if changing permissions on the system folder itself is safe or would cause any issues, I just created a folder within system and set permissions to 644 reclusive, created some files and rebooted - created folders/files and modified permissions remained fine after reboot.
If you need write permissions in system to install apps as system/app you may find this magisk module useful, it's called App Systemizer which allows you to use apps as system apps systemlessly. Just search in magisk modules.
Hope this helps.
Click to expand...
Click to collapse
Cool, I'll give your suggestions a try. I'm a fan of ES File Explorer. They have a root explorer built in their app and previously I had a S8 Exynos and a S9 Exynos and that app worked for those phones but with this S10 the switch is grayed out and no other app is working for me either. On my older S8 Exynos and S9 Exynos I rooted with stock-rom + stock-kernel and just needed TWRP+Magisk and I always was able to modify or add/delete system files with ES file explorer. I guess Samsung is getting more and more strict on allowing this by making us hop through more hoops in order to do so. So far I only have ready only system files on the S10 Exynos which is new to me because the S8 and S9 always allowed modifying system files in the past but I will try your methods you suggested. Worst case I'll attempt the custom-rom + custom-kernel and see if that works. Right now I have stock-rom+custom-kernel. I was able to make changes in the system files in TWRP but hopefully your method will allow me to edit system files without having to switch to TWRP every time I want to change something. I will keep you updated.
On a side note I just rooted a Samsung S20 Exynos and turns out that the system files are read only everywhere whether in TWRP or not, so Samsung keeps making things more difficult on us all. I currently have no way of modifying system files on the S20 no matter what I try but that phone is still much newer so I will give the magicians more time before I look into the forums more for that phone. Right now if I can get the S10 Exynos then I'll be happy.
I'll let you know how things progress. If I get what I need done with this S10 then I am happy to give you a donation for your help in this matter. I would not have gotten this far without your help. Previously the S8 and S9 days were so much easier and people had youtube videos galore that described how to root. The process was easy and everything was unlocked as read write back in the S8 and S9 days.
Yeah I use to use ES on android 6-8 then moved of to solid explorer, very similar ui to ES and also has root explorer but unfortunately it does not work to change permissions on s10 android 10 (bloody samsung/google). So far the only free one I have found is x-plore to be able to do this now. Looks like google is locking down android even more now with android 11