Database Develop

Cyanogenmod to Stock

Guys
I installed CM 7 successfully on my SGS using instructions here
http://www.galaxyroot.com/rom-cyanogenmod-7-for-galaxy-s-non-official/
It installed perfectly but i m not having signal. So i flashed back original JPY using ODin but phone is stuck on galaxy logo. Please advice on how to revert to original ROM?
Thanks

did you use PIT and check REPARTITION when you flashed back to JPY ??

azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
No as i have one file only JPY_JPY_JPY.tar

azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
As per Odin tutorial i select Pit and repartition only when i have 3 files. Can you please advice where can i get 3 files as i have one file only from samfirmware?
My I9000 is international and factory unlocked....

right well were gunna need a 3 file firmware in order to use PIT. bear with me whilst i have a look for one.

probably samfirmare.com ?

yeah just been looking on there they all seem to be 1 file

Yes samfirmware.com has 1 files only.
Are you sure if i flash with 3 files and select repartition then it will solve my problem?

install another firmware like jpjpa with 3 files and then flash xxjpy on it

Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?

Will kies be of any help if i put phone in download mode and attach it with kies?

well im looking at a site that says do re partition with 1 file but its not recommended. http://androidadvices.com/update-samsung-galaxy-s-gt-i9000-to-froyo-xxjpy-2-2-1/
re partition should fix the problem,

zeeshee said:
Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?
Click to expand...
Click to collapse
WOOHOO !!!! you found it lol been searching for that with no luck. if XDA says it will work.... it will work lol i have faith in XDA

How to get three files as it is only 1 exe file?

exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??

azzledazzle said:
exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??
Click to expand...
Click to collapse
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????

zeeshee said:
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????
Click to expand...
Click to collapse
i dont know try renaming it. im downloading it myself now so i can see whats going on

ok its self ecxtrating file..
it gave me following 2 files only
CODE_I9000XXJPU.tar.md5
MODEM_I9000XXJPU.tar.md5
Are these phone and CSC for oDin? What about PDA?

http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit

azzledazzle said:
http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit
Click to expand...
Click to collapse
Thanks. Odin is updating now.. Hope it works once done.

[Q] Odin failed - galaxy note

I was trying to install ICS to my galaxy note, it wasn't rooted and I was running GB 2.3.6
Now I can access *Power+home+Volume down*
Any ideas?
Thanks in advance.

ossamatarek said:
I was trying to install ICS to my galaxy note, it wasn't rooted and I was running GB 2.3.6
Now I can access *Power+home+Volume down*
Any ideas?
Thanks in advance.
Click to expand...
Click to collapse
You CAN or CANT access download mode ? If you can, simply flash a stock ROM via ODIN.

Akiainavas said:
You CAN or CANT access download mode ? If you can, simply flash a stock ROM via ODIN.
Click to expand...
Click to collapse
Yes I can, I tried to downgrade to GB but it failed as well :/

I don't really clearly understood your issue.
But if you want to flash a Stock ICS Rom, start ODIN PC, start your SGNote in download mode (button volume down + home + power), then connect your SGNote to your PC and flash via ODIN PC.
If you don't know exactly how to use ODIN PC, check tutos on the forum.

ossamatarek said:
Yes I can, I tried to downgrade to GB but it failed as well :/
Click to expand...
Click to collapse
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?

andreww88 said:
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
Click to expand...
Click to collapse
Sorry I wanted to upload a screen shot for it but it won't let me.
http : // imageshack.us/f/339/43186614. png/ *Remove spaces*

ossamatarek said:
Sorry I wanted to upload a screen shot for it but it won't let me.
http : // imageshack.us/f/339/43186614. png/ *Remove spaces*
Click to expand...
Click to collapse
I'm at work right now and I can't view imageshack because it's blocked on this computer.

andreww88 said:
I'm at work right now and I can't view imageshack because it's blocked on this computer.
Click to expand...
Click to collapse
Thanks for trying to help

Reinstall your ADB/USB drivers, make sure you're using USB2.0 port - for me USB3.0 always results in failed flash, ultimately switch USB ports.

i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?

Richard.p.struike said:
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Click to expand...
Click to collapse
The file you download from dr. Ketan is a .rar file, unzip it once and you get a .tar file. Flash that file with Odin in pda section. So don`t unzip the .tar file again.

andreww88 said:
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
Click to expand...
Click to collapse
The problem was the ROM itself
I flashed a new 4.0.3 and it worked perfectly
Thanks a lot.

Richard.p.struike said:
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Click to expand...
Click to collapse
To start with - you need root to flash this custom ROM, so unrooting your device was a mistake, you have to root it again.
Now, i've never flashed Criskelo's ROM, but from what i've read in the thread, you need to root your device, flash Chainfire's ICS repack via mobile odin, and then flash criskelo rom via CWM. Do not unpack the .zip file, you need to point CWM to that file.

Akiainavas said:
To start with - you need root to flash this custom ROM, so unrooting your device was a mistake, you have to root it again.
Now, i've never flashed Criskelo's ROM, but from what i've read in the thread, you need to root your device, flash Chainfire's ICS repack via mobile odin, and then flash criskelo rom via CWM. Do not unpack the .zip file, you need to point CWM to that file.
Click to expand...
Click to collapse
witch rom should i install first then?
and then with CWM to the zip file i can install this rom. thats nice
Who can help me with the rom i should have running on my note before i start this?

You should be on rooted ICS. Then you flash Criskelos rom from CWM

ossamatarek said:
Thanks for trying to help
Click to expand...
Click to collapse
upload it somewhere else then!

Belfia said:
You should be on rooted ICS. Then you flash Criskelos rom from CWM
Click to expand...
Click to collapse
i've downloaded
N7000XXLPY
and root my device
but i don't see any CWM ?
i see super user but no cwm..
what am i doing wrong or what am i forgetting..
can't remember flashing was this hard on my HTC and Samsung Wave.....
who can help me out plz?

Richard.p.struike said:
i've downloaded
N7000XXLPY
and root my device
but i don't see any CWM ?
i see super user but no cwm..
what am i doing wrong or what am i forgetting..
can't remember flashing was this hard on my HTC and Samsung Wave.....
who can help me out plz?
Click to expand...
Click to collapse
When you boot into recovery, is it CWM recovery?
If you are talking about not seeing the CWM app, don't worry about that.

andreww88 said:
When you boot into recovery, is it CWM recovery?
If you are talking about not seeing the CWM app, don't worry about that.
Click to expand...
Click to collapse
no still boots android revovery
i've tried 3 times but still the same

Richard.p.struike said:
no still boots android revovery
i've tried 3 times but still the same
Click to expand...
Click to collapse
So you have to flash the CWM.zip file found in drketan's thread in android development.

Boot-loop, traditional debricking doesn't work

Hi All,
I need your help with resolving my i8190N boot-loop situation.
What caused it:
I was on aokp and flashed revenge v4 over it with cwm including the modem mod listed in the thread.
I did manually format system, data & cache before and possibly after.
Symphtomps:
The white i8910N logo shows up, then disappears and the whole process repeats each few seconds.
Can't boot into recovery.
What I tried already:
Booted into odin mode
Flashed: wipe.md5, params.md5, stock recovery.md5, pre-rooted stock rom.
No change whatsoever.
Can someone help me resolving this?
I look funny on the train typing on my beloved G1 from 2009
Thanks!

Hi
Odin, instal .pit GT-I8190N file, and flash device.

Flashing ROMs on the way to work, you're brave lol. I do this sometimes lmfao.
Sent from my GT-I8190 using Tapatalk 2

vicoolpl said:
Hi
Odin, instal .pit GT-I8190N file, and flash device.
Click to expand...
Click to collapse
Thanks for the reply vicoolpl.
Can you please detail this out for me a little bit?
- Download link
- Steps for Odin dummies

I just attached two .pit zips I found. I'm unsure which one to use. The size is equivalent, but the CRC32 inside the zip is different.
Thanks for any hint.

A-Droid said:
I just attached two .pit zips I found. I'm unsure which one to use. The size is equivalent, but the CRC32 inside the zip is different.
Thanks for any hint.
Click to expand...
Click to collapse
Use the pit file that matches your phone model, which is the i8190N, dont worry if you used the wrong pit file, it will automatically fail

AssToast said:
Use the pit file that matches your phone model, which is the i8190N, dont worry if you used the wrong pit file, it will automatically fail
Click to expand...
Click to collapse
Thanks for the hint.
Unfortunately this didn't change anything either.
I did it both ways:
1. Flash the .pit first, then the ROM next
2. Flash the .pith and the ROM at the same time
Please see the attached screenshot of what I did.
Update: Just repeated the same thing on the screenshot but with re-partitioning enabled. Still no joy.
Thanks.

Use PARAM file here, see if that helps, flash as PDA in Odin.
http://forum.xda-developers.com/showthread.php?t=2159660
Sent from my GT-I8190 using Tapatalk 2

Enable 3 button combo for recovery: http://forum.xda-developers.com/showthread.php?t=2157105
Start in recovery and do a factory reset.

It finally worked out!
I installed the 3 button combo + CWM bundle + the official ROM for my carrier from Samsung-Updates.
Since then I flashed reVenge v4.0 and this time it simply worked.
Great thanks for all the replies!

WHY oh WHY

So, I have a Note 3 that I am trying to upgrade (from 4.2 maybe). Kies and Kies 3 do not recognize my phone. When I tried to Odin it, I got an error and the message, "firmware upgrade encountered an issue". I've tried reflashing, but nothing helps. I feel like an idiot that I cannot figure this out. I have read and read. I have downloaded:
N900A_OC1_Stock(100%).zip
AP_N900AUCUEOC1_CL4335446_QB4210025_REV03_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_N900AATTDNL1_CL3032228_QB3188679_REV03_user_low_ship_MULTI_CERT.tar.md5
CP_N900AUCUDNL1_CL3032228_QB3188679_REV03_user_low_ship_MULTI_CERT.tar.md5
BL_N900AUCUDNL1_CL3032228_QB3188679_REV03_user_low_ship_MULTI_CERT.tar.md5
AP_N900AUCUDNL1_CL3032228_QB3188679_REV03_user_low_ship_MULTI_CERT.tar.md5
N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5
So, I've tried different ways and I cannot figure out what I am doing wrong. I have tried with Odin 3.09 and 3.10.6. I cannot use the zip file since I can't seem to get my phone into recovery with the error message above.
Can someone provide me with some guidance (in very simple steps)? Much appreciated.
problem with the update

ptgptg said:
So, I have a Note 3 that I am trying to upgrade (from 4.2 maybe). Kies and Kies 3 do not recognize my phone. When I tried to Odin it, I got an error and the message, "firmware upgrade encountered an issue". I've tried reflashing, but nothing helps. I feel like an idiot that I cannot figure this out. I have read and read. I have downloaded:
N900A_OC1_Stock(100%).zip
AP_N900AUCUEOC1_CL4335446_QB4210025_REV03_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_N900AATTDNL1_CL3032228_QB3188679_REV03_user_low_ship_MULTI_CERT.tar.md5
CP_N900AUCUDNL1_CL3032228_QB3188679_REV03_user_low_ship_MULTI_CERT.tar.md5
BL_N900AUCUDNL1_CL3032228_QB3188679_REV03_user_low_ship_MULTI_CERT.tar.md5
AP_N900AUCUDNL1_CL3032228_QB3188679_REV03_user_low_ship_MULTI_CERT.tar.md5
N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5
So, I've tried different ways and I cannot figure out what I am doing wrong. I have tried with Odin 3.09 and 3.10.6. I cannot use the zip file since I can't seem to get my phone into recovery with the error message above.
Can someone provide me with some guidance (in very simple steps)? Much appreciated.
problem with the update
Click to expand...
Click to collapse
I always flash the NC2 files with Odin 3.09 and never had a problem. Ones I flash from here, http://forum.xda-developers.com/showpost.php?p=54803130&postcount=136 Just so you know, I flash all four files BL,AP,CP and CSC never the All in One. :good:

Rooted i747 said:
I always flash the NC2 files with Odin 3.09 and never had a problem. Ones I flash from here, http://forum.xda-developers.com/showpost.php?p=54803130&postcount=136 Just so you know, I flash all four files BL,AP,CP and CSC never the All in One. :good:
Click to expand...
Click to collapse
I just tried to download the files and I'm getting an MD5 error on the AP file.
Any thoughts? And thanks for your help.

I tried a download from 4 other sites before finally getting rid of the MD% error. Hopefully this will flash now. Thanks again for your help.
Regards,

ptgptg said:
I just tried to download the files and I'm getting an MD5 error on the AP file.
Any thoughts? And thanks for your help.
Click to expand...
Click to collapse
Stupid question, it is AT&T phone. You can try to delete the .md5 at the end of the file name. Should look like this after AP_N900AUCUCNC2_722276_REV03_user_low_ship_MULTI_C ERT.tar

Rooted i747 said:
I always flash the NC2 files with Odin 3.09 and never had a problem. Ones I flash from here, http://forum.xda-developers.com/showpost.php?p=54803130&postcount=136 Just so you know, I flash all four files BL,AP,CP and CSC never the All in One. :good:
Click to expand...
Click to collapse
Thank you again. It finally flashed and now I will see if I can update to Lollipop!

ptgptg said:
Thank you again. It finally flashed and now I will see if I can update to Lollipop!
Click to expand...
Click to collapse
If it don't update to lollipop. STOCK Lollipop Odin files http://forum.xda-developers.com/note-3-att/general/100-stock-lollipop-5-0-n900aucueoc1-t3069609 OR ROOTED Lollipop http://forum.xda-developers.com/showpost.php?p=59666958&postcount=2 must be rooted with Safestrap installed.

http://forum.xda-developers.com/showthread.php?t=3091772

The ones with "HOME" in it are flashed in the AP Slot correct? i.e.: N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5

Rooted i747 said:
If it don't update to lollipop. STOCK Lollipop Odin files http://forum.xda-developers.com/note-3-att/general/100-stock-lollipop-5-0-n900aucueoc1-t3069609 OR ROOTED Lollipop http://forum.xda-developers.com/showpost.php?p=59666958&postcount=2 must be rooted with Safestrap installed.
Click to expand...
Click to collapse
I cannot seem to download the AP file. I keep getting an MD5 error. I have tried from the above cited thread and looked everywhere on the net for another copy. I have all the other files downloaded, just not that one.
Thanks,

n1nj4Lo said:
The ones with "HOME" in it are flashed in the AP Slot correct? i.e.: N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5
Click to expand...
Click to collapse
Yes the AP slot.

ptgptg said:
I cannot seem to download the AP file. I keep getting an MD5 error. I have tried from the above cited thread and looked everywhere on the net for another copy. I have all the other files downloaded, just not that one.
Thanks,
Click to expand...
Click to collapse
You try downloading the "All-in-one/Non-Wipe Tars" instead and Odin it in the AP slot? http://forum.xda-developers.com/note-3-att/general/100-stock-lollipop-5-0-n900aucueoc1-t3069609 You don't Odin any other files, if you use the ALL-in-One file. This one ONLY gets flashed with Safestrap http://forum.xda-developers.com/showpost.php?p=59666958&postcount=2

Nand Erase In ODIN ( *** SOLVED *** )

Guys,
I need an urgent help. Here is my Story..
Using 9208 Note 5 model. After trying different custom roms i tried to flash stock firmware using Odin. Did everything correctly. Unfortunately i checked Nand Erase all option too. The result is my Note 5 stuck at Samsung DimDim logo. For almost 1 hour. Tried reflash several times but no luck..
So i flashed twrp and wipe data and factory reset and reboot. Its works. But problem with voLTE. No voLTE working. I know flashing JIO voLTE fix will solve this but i need a solution for this Odin. I dont want to flash voLTE fix.
Can someone help me pls.. How to bypass that Samsung logo without flashing Twrp.. ?

Rajeev said:
Guys,
I need an urgent help. Here is my Story..
Using 9208 Note 5 model. After trying different custom roms i tried to flash stock firmware using Odin. Did everything correctly. Unfortunately i checked Nand Erase all option too. The result is my Note 5 stuck at Samsung DimDim logo. For almost 1 hour. Tried reflash several times but no luck..
So i flashed twrp and wipe data and factory reset and reboot. Its works. But problem with voLTE. No voLTE working. I know flashing JIO voLTE fix will solve this but i need a solution for this Odin. I dont want to flash voLTE fix.
Can someone help me pls.. How to bypass that Samsung logo without flashing Twrp.. ?
Click to expand...
Click to collapse
Well that's because you erased everything including your partitions so now you need to find the .PIT file for your exact model and select it in odin while flashing the firmware again.

MrMike2182 said:
Well that's because you erased everything including your partitions so now you need to find the .PIT file for your exact model and select it in odin while flashing the firmware again.
Click to expand...
Click to collapse
Thanks bro. I found mine. So there is option to choose PIT in Odin ?
@MrMike2182
Thanks alot for saving me. Now everything works perfect. Thanks again..

Rajeev said:
Thanks bro. I found mine. So there is option to choose PIT in Odin ?
@MrMike2182
Thanks alot for saving me. Now everything works perfect. Thanks again..
Click to expand...
Click to collapse
It should be in the options tab.

MrMike2182 said:
It should be in the options tab.
Click to expand...
Click to collapse
Yea i fixed it bro. Thanks bro

How did you get your partitions back?

dallen5 said:
How did you get your partitions back?
Click to expand...
Click to collapse
That's what the PIT file does.

dallen5 said:
How did you get your partitions back?
Click to expand...
Click to collapse
Download PIT file for ur exact model number from Samsung website and flash it via ODI with Firmware.

MrMike2182 said:
Well that's because you erased everything including your partitions so now you need to find the .PIT file for your exact model and select it in odin while flashing the firmware again.
Click to expand...
Click to collapse
My S7 edge stuck in bootloop sometimes No Command and Fail to open recovery_cause (No such file or directory) after Android 8.0 update, i do the every solution provided on the internet but its not done. After watch your thread i understand what is happening with my phone and i want to do the Nand Erase & Re-Partition for the same.
please help me to find the .pit file for erase nand and re partition.
Your support will save my phone.
Millions of thanks.

Amolxp said:
My S7 edge stuck in bootloop sometimes No Command and Fail to open recovery_cause (No such file or directory) after Android 8.0 update, i do the every solution provided on the internet but its not done. After watch your thread i understand what is happening with my phone and i want to do the Nand Erase & Re-Partition for the same.
please help me to find the .pit file for erase nand and re partition.
Your support will save my phone.
Millions of thanks.
Click to expand...
Click to collapse
I need to know the firmware version that you were on before this problem started.. The PIT file is always inside of the firmware you download all you need to is unzip it from within the .zip..

MrMike2182 said:
I need to know the firmware version that you were on before this problem started.. The PIT file is always inside of the firmware you download all you need to is unzip it from within the .zip..
Click to expand...
Click to collapse
Thanks for your kind response, after update of the firmware current version is G935FXXS4ESC6 and before update G935FXXS3ERJ2 and i forgot the previous version of Android 7.0. Can downgrade of Android version will fix the same, if yes please let me know how to downgrade the android version.
Thanks you so much

Amolxp said:
Thanks for your kind response, after update of the firmware current version is G935FXXS4ESC6 and before update G935FXXS3ERJ2 and i forgot the previous version of Android 7.0. Can downgrade of Android version will fix the same, if yes please let me know how to downgrade the android version.
Thanks you so much
Click to expand...
Click to collapse
You can only downgrade if you have firmware that's bootloader version 4 because you're currently on bootloader version 4 and you cannot go back down to bootloader version 3 or earlier because that's been blocked by Sammy.. If you need the PIT file it's inside of the firmware that you downloaded you just need to extract it from the file. If you have the firmware G935FXXS4ESC6 then unzip it and then unzip them again and you'll find the PIT file in there.. It's usually inside of the CSC .tar file.

MrMike2182 said:
You can only downgrade if you have firmware that's bootloader version 4 because you're currently on bootloader version 4 and you cannot go back down to bootloader version 3 or earlier because that's been blocked by Sammy.. If you need the PIT file it's inside of the firmware that you downloaded you just need to extract it from the file. If you have the firmware G935FXXS4ESC6 then unzip it and then unzip them again and you'll find the PIT file in there.. It's usually inside of the CSC .tar file.
Click to expand...
Click to collapse
Thanks for your kind support, as per your suggestion after unzip the csc file i found the pit file . Now should i select Nand Erase & Re-Partition options after inserting the pit file. Is it safe to select these options?
I have flash so many time with same firmware, flashing was ok but still i'm facing same problem.
Millions of Thanks

Amolxp said:
Thanks for your kind support, as per your suggestion after unzip the csc file i found the pit file . Now should i select Nand Erase & Re-Partition options after inserting the pit file. Is it safe to select these options?
I have flash so many time with same firmware, flashing was ok but still i'm facing same problem.
Millions of Thanks
Click to expand...
Click to collapse
You can do that yes and if that doesn't fix your problem then there must be something wrong with the phone itself. For your information though you're asking for help in the Galaxy Note 5 thread but you're on a Galaxy S7 Edge.. I do think a moderator might end up moving this to the correct place.