USB didnt work only for chargeing - Xperia Z Q&A, Help & Troubleshooting

Hi guys ,
i have problem with my xperia Z. comes troubles with USB connection.
especially with data transfer , it didn't connect to the flashtool and also did not works Fastboot and flashmode.
I tried many cables and so many ways to repair it. but it didn't help.
factory reset didn't help and also repair with PC companion, i tried change MTP and MSC mods but it didnt help also,
do someone of you know what to do? or what to do to flash clear sony rom to complaint it at the store where i bought my phone,??
thank u very much for any help!!
:crying::fingers-crossed:

Hi, have you flashed a Custom ROM before the USB problem appeared?
You wrote about trying to fix with Sony PC Companion, but how it's possible if the USB connection of your phone doesn't work?
Let me know clearly the situation, you cannot transfer any data through USB?
If you cannot transfer data through USB and the problem appeared suddenly , can be an hardware issue with USB Connector.
Are you on STOCK or CUSTOM ROM?
Have you tried to wipe cache/factory from recovery to see if that helps?
If you want more help let me know more details

paranormal11 said:
Hi, have you flashed a Custom ROM before the USB problem appeared?
You wrote about trying to fix with Sony PC Companion, but how it's possible if the USB connection of your phone doesn't work?
Let me know clearly the situation, you cannot transfer any data through USB?
If you cannot transfer data through USB and the problem appeared suddenly , can be an hardware issue with USB Connector.
Are you on STOCK or CUSTOM ROM?
Have you tried to wipe cache/factory from recovery to see if that helps?
If you want more help let me know more details
Click to expand...
Click to collapse
Hi, yes I flash custom rom before USB goes wrong..
I mean it with PC companion , that i tried it and it didn't work..it means that i stuck on the part when u have to connect phone with volume down.
Yes, i cannot transfer the data through USB, i cannot nothing with USB flashmode, Fastboot. only thing i can do is charging with charger.
I tried to flash clear , Stock rom 5.0.2 , but I thing that it have little customization...
Yes, i tried to wipe but only from service menu and settings of phone.. because my recovery disappear...somehow
Thank you for your hapls!!!!

It's a really strange thing,
You have wrote tried to flash Android 5.0.2 is flashing process going fine?
Can you confim that when Sony PC Companion ask for the phone, the phone is off and you connect to USB holding e keeping press Volume -
You have to press and hold Volume - before connect USB cable to PC.
Wich CUSTOM ROM have you flashed before USB goes wrong? Have you use the recovery or flash with Flashtool?
The USB connector with the CUSTOM ROM installed have never works?
Are you sure you have not broken your USB connector?
Let me know

paranormal11 said:
It's a really strange thing,
You have wrote tried to flash Android 5.0.2 is flashing process going fine?
Can you confim that when Sony PC Companion ask for the phone, the phone is off and you connect to USB holding e keeping press Volume -
You have to press and hold Volume - before connect USB cable to PC.
Wich CUSTOM ROM have you flashed before USB goes wrong? Have you use the recovery or flash with Flashtool?
The USB connector with the CUSTOM ROM installed have never works?
Are you sure you have not broken your USB connector?
Let me know
Click to expand...
Click to collapse
.. I flash the rom before month? or so.... and then after month normal working transfer data via USB and pc and charging from pc ..I want to backup my data (photos , videos etc..) and it didnt works...so i tried many ways to repair it or get works.. ( as i says up))
yes ofcourse I know that phome must be switchoff before geting to flashmode..
The usb connector works normally whit milions rom i tried before..)
may be it is broken,, so now im trying to remove/delete kingroot and find out which rom I flash (this..the last one)
THX mate )))

If the USB connector worked for some time with the CUSTOM ROM installed, i think it isn't a ROM problem, can be an app that caused this but probably may be an hardware problem of the USB connector.
If you have already wiped all your data and reset your phone to factory settings and the problem persist, at 99,9% it's a fault USB connector.

paranormal11 said:
If the USB connector worked for some time with the CUSTOM ROM installed, i think it isn't a ROM problem, can be an app that caused this but probably may be an hardware problem of the USB connector.
If you have already wiped all your data and reset your phone to factory settings and the problem persist, at 99,9% it's a fault USB connector.
Click to expand...
Click to collapse
usb works before.. and now it is broken for two weeks.. so it looks like usb connector is broken..
so.. can u help me with removing the king root ( and kinguser app) pls?? because if i tap in the settings of Kinguser app ´´remove root permission´´ and than clear.. its processing.. but afer that is kinguser still there.....
what shall i do?

Have you tried different cables?
Perhaps one of the wires is torn.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There are cables for data transfer & there are cables for power supply.

of course.. I tried.. as I says before in the first post .(maybe four different cables)
i'm trying to remove root and then try to complain the phone.. but in not sure which one of rom i have now.. I cant recognize if it is stock rom or not.. and I can't remember which I flashed this last one...:/

Your ROM Version is a Stock Android 5.0.2 for UK (United Kingdom) phones
http://forum.xda-developers.com/xperia-z/general/stock-rom-xperia-z-c6603-10-6-0-454-t3127499
" Xperia Z (C6603) Generic UK (.FTF)"
Android version: 5.0.2
Baseband: 9x15A-ACEFWMAZQ-30110212-82
Kernel: 3.4.0-perf-g8fa3dae [email protected] #1 Wed Apr 8 17:43:10 2015
Build number: 10.6.A.0.454
Customization Version: 1270-7689
Branding: Generic UK
Country: United Kingdom
BUT
kingvortex said:
This works on ANY Xperia Z (C6603).
Click to expand...
Click to collapse
So this is not the reason for your problem.
Did you wipe your Cache/Dalvik Cache with recovery?
If not...do it and try again.
You could activate the Development Settings in Android
1. Go to settings
2. Choose "about the phone"
3. Press 5 times on "Build Number" till the message "your are a developer"
4. go back
5. go to Developer-options (it's a new setting directly over the point "over the phone")
6 Activate "USB-Debugging" or "Android-Debugging"
7. Try again to connect with PC.
Good luck
If you connect to PC....
What shows your PC?
1. Look for new Partitionen.
2. Look into Printer & Devices
3. Look into Device-Manager (ne USB Device? Or Modem Device? Or something else?)
4. Look into Partitiontables on your PC.

thx...
BUT there is the problem.... My recvery disepeared...
SO.. is it possible to install recovery without PC?? I have Unlock Bootloader and root.. what about using the emulator.. MUST BE ANY WAY to get RECOVERY without PC just installed in phone..PLS help

Sure you can install recovery without pc:
(but only with root)
1. Download https://dl.twrp.me/yuga/twrp-2.8.7.0-yuga.img.html
2. Copy file to external SDCard
3. Install Shell-App (Terminal) on Phone (f.e https://play.google.com/store/apps/details?id=com.acr.shellterminalemulator or https://play.google.com/store/apps/details?id=jackpal.androidterm)
4. open shell/terminal
5. Type "su" without ""
6. Type "dd if=/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel" without ""
if it dosn't work (but should work) try following:
http://www.jmzsoftware.com/downloads/TWRPManager.apk (direct download) or https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager (play store but same file)
or
http://dl.cdn.chip.de/downloads/112...434-bd44ef-B-80f5410908912da7c9de22a0ec003aed
or
https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Good luck

THX.. @Xperience Z
that apps i tried before..)
but also the command didnt work...
i wrote..
su
dd if=/sdcard/twrp-2.8.7.0-yuga.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
(is it right? )

(i renamed twrp-2.8.7.0-yuga.img to twrp.img because short is good )
so...you should use "supersu" instead of Android own adminprogram......
if you type su, the terminal will ask you "Terminal tries to get root access"
did you copy the twrp.img on internal or external sdcard?
There are several ways to Rome.
internal:
dd if=/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
dd if=/storage/sdcard0/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
dd if=/mnt/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
external:
dd if=/storage/sdcard1/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
dd if=/ext_card/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel <- that's what i use
Here you've Screenshot How-To:
Rashr from play store is another option. Select the. img and flash it to recovery (in reality - fotakernel)
Good Luck again

@Xperience Z
THANXX!!
but nothing helps.....i dont know why..
also rash didnt works..
SO I will unroot my phone and make factory reset form setting and i have to hope that they will accept my complaint and repair my phone..
what will u recommend me to real unroot (deleting the su user (kingroot and kinguser in my case) ??
thx so much mate!

Did you activate "USB Debugging" ?
Dude you have a problem.
unroot = revert to stock (flash stock rom) - there is no other method.
But by root you don't lose your guarantee / manufacturer's guarantee.. Only by unlocking the bootloader.
what will you get for messages in terminal?
can you make screenshots?

You could try super-sume https://play.google.com/store/apps/details?id=darkslide.com.supersumepro
(for a few dollars)
Then when kingroot has been purged and replaced with supersu, you can do a full unroot from within the supersu app.
The unlocked bootloader may be the bigger problem though. It can, in some cases void warranty repair. (depending on seller/repairers attitude )

Related

USB not working but system is alive - how to flash?

Hey guys,
I got a SGS I9000 here from a friend of mine who got it from egay (stupid, but nvm) and I try to fix the device but till now I was not lucky.
I want to upgrade to a newer / higher version but the "faulty" USB makes it very difficult.
Here are the facts:
- The device is running 2.3.3 Gingerbread
- Device Information: GT-I9000HKYDBT + PDA: I9000XWJVI , PHONE: I9000XXJVO, CSC: I9000DBTJV2
- Charging via USB does work, data connection does not work
- Entering Recovery Mode works
- CWM is not installed
- Samsung Kies is installed
- Entering Download Mode works
- External micro-SD Cards are being recognized at Android
- If I connect the device in Windows or Download Mode, the message "USB-Device was not recognized" comes up
What I`ve tried till now:
- three different micro-USB cables (original Samsung, HTC and Motorola)
- two different PCs with Kies installed and not installed
- Tried to flash via Recovery Mode but nothing is shown on the "external SD", even after renaming to update.zip
- Managed to copy files into internal flash but since the "original" Recovery Mode seems to have a verification, the flash process aborts either with
"E:signature verification failed" or "E:failed to verify whole-file signature"
- Odin of course but USB data does not work unfortunately so Odin as well
So the big question for me is:
Is there ANY chance to root/flash the device with the actual difficulties?
Any help or hints are highly appreciated.
Cheers
FaCeOff said:
So the big question for me is:
Is there ANY chance to root/flash the device with the actual difficulties?
Any help or hints are highly appreciated. Cheers
Click to expand...
Click to collapse
you may have to try all these http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571 But first break that cycle by removing battery and reinsert after a few min and check phone connection or Mobile Odin is another option
email the recovery file to yourself or upload to dropbox. then download to your phone and flash away!
Don't forget to thoroughly clean your micro usb connector. I once had the same issue with my sgs. Different cables or drivers didn't work. I was about to give up on it, but then fixed it by cleaning it with rubbing alcohol and very tiny dentaid toothbrushes.
Afterwards it worked like a charm. Worth giving a shot, since these connectors collect a lot of dust/dirt over time.
xsenman said:
you may have to try all these http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571 But first break that cycle by removing battery and reinsert after a few min and check phone connection or Mobile Odin is another option
Click to expand...
Click to collapse
Thanks for your fast reply.
I did mention this thread yesterday but after installing all different drivers, switching of the PC completely and disconnecting all devices, turning BT ON/OFF, switching between Dev Mode and MSD I'm at the same position as before.
Doesn't matter which cable I use, I just get always the same fking message about Device is not being recognized.
In the meantime, I got a 2nd SGS from a friend of mine which works perfectly after connecting the device with my PC.
It starts immediately with the driver installation and is ready in couple of seconds.
I also tried to put the cable carefully into the USB but it doesn't help either.
Any other suggestions?
FaCeOff said:
Any other suggestions?
Click to expand...
Click to collapse
That would mean, its your USB slot on the phone, that needs a solution, either you have to examine it very closely for damage to resolve it or its internal and you may have to change it.
hey
can u do to download mode??
if u can then upgrade using Odin...
And the uUSB issues cam with my SGS too,but after flashing the firwmare via odin there was no issues...i flashed 2.3.6 ValuePack..
U too can give it a shot..
xsenman said:
That would mean, its your USB slot on the phone, that needs a solution, either you have to examine it very closely for damage to resolve it or its internal and you may have to change it.
Click to expand...
Click to collapse
Yep, doesn't look good and now I'm quite sure this cannot be solved easily.
tchindalia said:
hey
can u do to download mode??
if u can then upgrade using Odin...
And the uUSB issues cam with my SGS too,but after flashing the firwmare via odin there was no issues...i flashed 2.3.6 ValuePack..
U too can give it a shot..
Click to expand...
Click to collapse
Well, as told above, I can enter download mode but USB DATA connection does not work!
So from my understanding, Odin only works if there's a valid connection, otherwise I could flash anything and would not have the problem
Mobile Odin does not work due to the root restriction.
Is there any way to flash another ROM or get the the device rooted with these restrictions?
Stuck on First Screen
Well this is not an answer to the problem. Well am having the same problem as you, just mine is more complicated.
I managed to root using Z4root by copying the APK file on external sd .
I got cmw and entered recovery.
I updated using the CM10-unofficial rom that is in the development forum
I restored the nand that i did in recovery and now the phone is frozen (Stuck) on the first boot screen (Galaxy S GT-i9000 SCREEN)
Now I can go to Download mode but I can't go to recovery mode.
Let me remind you that my USB data connection is not working.
So now I am looking for a solution that would permit me to flash without USB or allow me to go to recovery mode.
Or a tutorial on how to change the usb port myself.
Thanks in advance.
kigordid said:
Now I can go to Download mode but I can't go to recovery mode.
Let me remind you that my USB data connection is not working.
Click to expand...
Click to collapse
As long as you can get to download mode, flashing should solve your problem after you resolve the USB problem , which can be due a number of issues.
Somehow ROM changes and bad flashes, may have pin configuration changes on the phone, (just like changes in combo key functions when you use different ROM) ...so driver changes works for some
So you may have to try all these http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571 options to get your USB connection back. But first break that cycle by removing battery and reinsert after a few min and check phone connection , and try those options.
FaCeOff said:
Thanks for your fast reply.
I did mention this thread yesterday but after installing all different drivers, switching of the PC completely and disconnecting all devices, turning BT ON/OFF, switching between Dev Mode and MSD I'm at the same position as before.
Doesn't matter which cable I use, I just get always the same fking message about Device is not being recognized.
In the meantime, I got a 2nd SGS from a friend of mine which works perfectly after connecting the device with my PC.
It starts immediately with the driver installation and is ready in couple of seconds.
I also tried to put the cable carefully into the USB but it doesn't help either.
Any other suggestions?
Click to expand...
Click to collapse
Sorry to repeat my comment again, but if all these drivers aren't working for you, you should check your micro-usb connector. I'm pretty sure the connector is the issue here.
Have you tried cleaning the micro-usb connector on your phone? Don't just blow the dust out or clean it a bit with some paper, but go for a complete and thorough cleaning solution.
Get yourself some dentaid toothbrushes. Get a few sizes. You can get these at your local pharmacy.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Get some Cleaning / Rubbing Alcohol. You can find this at a handyman store or your local pharmacy should have this as well.
Dip the toothbrush with some rubbing alcohol. The toothbrush should be a bit moist but not dripping wet.
Start cleaning the connector. You can apply some pressure to clean everything.
If this doesn't work, no harm done. These things are quite cheap and rubbing alcohol and these dentaid toothbrushes come in handy when other electronics go bust.
Honestly, just try it! People always dismiss this solution attempt as a last resort but it's usually the problem fixer.
I fixed mine that had the same problem with a similar technique
Sent from my GT-I9000 using Tapatalk 2
Trying using mobile Odin.
Establish best recowery mod fix and adb on your computer.
without root and probably will not even cwm mobile Odin.

[Q] [Help] Hard Bricked Xperia PC Recognizes as "qhsusb_dload"

Is there any solution?
DUMB ERROR HERE!!!!
I was flashing a rom but i make a big mistake and install another rom instead,( i use my phone as a usb sometimes! i forget to delete this rom from my sd card) :crying: MIUI for GALAXY S3 or something! Battery was over 86%
PROBLEMS:
1- No Leds (NO is NO!)
2- Phone doesnt vibrate ( not even hard keys combos, not anyones! )
3- Conecting to PC and PC doesn recognize Phone Sound alert for usb not dirvers
4- device manager shows my phone as "qhsusb_dload" with yellow alert for no drivers.
5- Flashtool doesnt see my phone on eny mode Fastboot or Flashtool
Any help?
I hope find a method to trick the driver an tell my pc is a XPERIA Z....
Any solutions?
THANX IN ADVANCE GUYS!
I also had that prob before after my phone get into the water. What i mean is water damage. What i did is leave the phone around 1 to 2 days.then charge it.miracles happen,my phone suddenly boot up.
Sent from my C6603 using xda app-developers app
mcyorian said:
Is there any solution?
DUMB ERROR HERE!!!!
I was flashing a rom but i make a big mistake and install another rom instead,( i use my phone as a usb sometimes! i forget to delete this rom from my sd card) :crying: MIUI for GALAXY S3 or something! Battery was over 86%
PROBLEMS:
1- No Leds (NO is NO!)
2- Phone doesnt vibrate ( not even hard keys combos, not anyones! )
3- Conecting to PC and PC doesn recognize Phone Sound alert for usb not dirvers
4- device manager shows my phone as "qhsusb_dload" with yellow alert for no drivers.
5- Flashtool doesnt see my phone on eny mode Fastboot or Flashtool
Any help?
I hope find a method to trick the driver an tell my pc is a XPERIA Z....
Any solutions?
THANX IN ADVANCE GUYS!
Click to expand...
Click to collapse
install usb drivers manually
if u r on win8 u should know to disable driver signature and etc (all tutorials are available)
then to find solution calm down, and check what did u do exactly step by step
not deleting another rom (i m opinion) cannot cause hard-brick cause almost of custom recoveries wipe everything themselves before start to flash new rom...
:good:
x102x96x said:
install usb drivers manually
if u r on win8 u should know to disable driver signature and etc (all tutorials are available)
then to find solution calm down, and check what did u do exactly step by step
not deleting another rom (i m opinion) cannot cause hard-brick cause almost of custom recoveries wipe everything themselves before start to flash new rom...
:good:
Click to expand...
Click to collapse
im not sure its so simply as connect the phone to charge, i mean, the phone was flashed by a rom designed for another phone!...
SONY XPERIA Z flashed by accident with a customn miui rom for GALAXY S3, as a result the phone is dead, no minimal responses, no vibs, or led, flashtool doesn works, and the only thing is the phone is seen bypc as "qhsusb_dload" unknown decvice.
About manually installed drivers... whats drives? Sorry for my english and thanks a lot for tour help!
mcyorian said:
im not sure its so simply as connect the phone to charge, i mean, the phone was flashed by a rom designed for another phone!...
SONY XPERIA Z flashed by accident with a customn miui rom for GALAXY S3, as a result the phone is dead, no minimal responses, no vibs, or led, flashtool doesn works, and the only thing is the phone is seen bypc as "qhsusb_dload" unknown decvice.
About manually installed drivers... whats drives? Sorry for my english and thanks a lot for tour help!
Click to expand...
Click to collapse
i don know what device is for xperia
but sth called Box is for galaxies that can reinstall rom from initial binaries... so it can help to recover almost dead phone
and some special tools again for galaxies, like g-tag or ...
i know them cause i hard-bricked my s3
But i didn't have any access to these tools... so my my s3 pasted away...
for ur situation; search more for these kindda tools and take it asap to pro. service or professional hardware engineer
good luck
:good:
Do you have ADB set up? See if ADB recognizes fastboot mode. Then maybe you can fastboot flash. But as far as I can tell with my limited knowledge the bootloader seems to be corrupted, which is probly irrepairable. Maybe you can get some of the real devs to help you if you ask nicely enough, I'm just a lurker...
mcyorian said:
Is there any solution?
DUMB ERROR HERE!!!!
I was flashing a rom but i make a big mistake and install another rom instead,( i use my phone as a usb sometimes! i forget to delete this rom from my sd card) :crying: MIUI for GALAXY S3 or something! Battery was over 86%
PROBLEMS:
1- No Leds (NO is NO!)
2- Phone doesnt vibrate ( not even hard keys combos, not anyones! )
3- Conecting to PC and PC doesn recognize Phone Sound alert for usb not dirvers
4- device manager shows my phone as "qhsusb_dload" with yellow alert for no drivers.
5- Flashtool doesnt see my phone on eny mode Fastboot or Flashtool
Any help?
I hope find a method to trick the driver an tell my pc is a XPERIA Z....
Any solutions?
THANX IN ADVANCE GUYS!
Click to expand...
Click to collapse
qhsusb_dload= qualcomm driver needed(but it wont change any thing). Only boot repair can solve this problem nothing else.
Ask riff box users about help.
robdevil said:
qhsusb_dload= qualcomm driver needed(but it wont change any thing). Only boot repair can solve this problem nothing else.
Ask riff box users about help.
Click to expand...
Click to collapse
Thanks!!! where can i find these people ? (riff Box Users?)
@[NUT] has a disaster recovery thread. He may be able to work some magic for you :fingerscrossed:
Sent from my C6603 using xda app-developers app
shoey63 said:
@[NUT] has a disaster recovery thread. He may be able to work some magic for you :fingerscrossed:
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
We where actually already working on a possible solution, he found my thread on his own
Help Needed
mcyorian said:
Thanks!!! where can i find these people ? (riff Box Users?)
Click to expand...
Click to collapse
have you found any solution because I am experiencing the same issue
Same Problem
Hi friends I have the Same problem With my xparia lt26w (acro s)
I think when the device has no kernel same thing would happen.
As I know Samsung users Made a program that save phones from Hard brick
Is there any way to write the same program for xperia devices???
Or If any boady knows a box that support Sony devices boot Repair???
I try riff 2014 box but Nothing happend and Not supported.
Any help Frome Developers plz???
I have the same problem, I try to install another rom on SXZ. I try QSTP and HDDrawCopy, but I need the files of bootloader for fix this issue, but I don't know where to find it.
This is my post http://forum.xda-developers.com/showthread.php?t=2639444
UPDATE
has been long time since my XZ was bricked, thanx to XDA community for help (specially @[NUT] ) but my phone was pretty dead ...
i left my phone alone by a month and go to vacations, now im back and put my phone to wall charger.... AND ****!
i got a red light!!!!!
i know there is no hope but, the phone was very unresponsive!!! and now i have a temporal red light,
the red led, turn on and was on by 5 minutes and then off, but when i press power button the led flashes acouple of times and off,
i put the phone on a pc, and the les turns on, but i still cant get flashmode work... i was triying on pc even with custom drivers by @[NUT] but no luck
the phone still doesnt get flashmode on. the phone on pc keep showing it as a qualcom **** device or somethig so.
Now, im a mac user, and ohhhh surprise! on mac the device get 2 different status...
1 - when connect to a mac and press the power button it says :
Sony Ericcsson Mobile Communications AB
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2- When try to get flash mode on it shows:
0x05c6 (Qualcom, Inc)
Unfortunately my flashtool on mac start to fail and i cant run it .. ( force close ?) ill try to reinstall the app
if you know how to help me on this new plataform or on a pc THNX guys!!!
if you have suggestions or tricks to try this XZ back to life it would be very appreciate!
Sorry for my english ....and thanx guys!
Try to contact @the_laser, who made the Z1 hardbrick recovery software: http://forum.xda-developers.com/showthread.php?t=2646405
As long as it's only your bootloader which has been screwed up, you will have every chance he might be able to fix it.

[q] my galaxy pocket wont start nor can i enter recovery

HEY GUYS !!
I am new to xda so im not sure if i have posted it at the right place.
anyway, my phone (galaxy pocket GTS5300) is rooted runs on infuzion 2 kernel and has hydroperia v2 custom rom(i followed the instructions from xda)
so recently i wanted to increase its ram so i partioned my external sd and installed swapper 2 (just like the post in xda),everything went all right
then i downloaded "file2sd"" from play store and installed it to gets some space in my phones internal memory but as i opened the app and selected
the format as ext3 the said i have to reboot and i pressed the "" restart now ""button,thats it and the phone just got stuck i waited for some time no buttons responded so removed the battery and tried turning it on but it just shows a blank screen after showing the model no. and i CANT enter recovery mode but i can enter odin (but my laptop does not recognize the device,eventhough i have tried installing all the usb drivers and kies ,i dont know if its because of the data cable or windows8 or my phone ) so i removed my external sd copied all my files and saw (in mini tool partition wizard)that my 2nd partition was full(512 mb)i didnt know what to do and i formatted everything(sd).
i dont know what to do next .someone please help!!!
glenzac said:
HEY GUYS !!
I am new to xda so im not sure if i have posted it at the right place.
anyway, my phone (galaxy pocket GTS5300) is rooted runs on infuzion 2 kernel and has hydroperia v2 custom rom(i followed the instructions from xda)
so recently i wanted to increase its ram so i partioned my external sd and installed swapper 2 (just like the post in xda),everything went all right
then i downloaded "file2sd"" from play store and installed it to gets some space in my phones internal memory but as i opened the app and selected
the format as ext3 the said i have to reboot and i pressed the "" restart now ""button,thats it and the phone just got stuck i waited for some time no buttons responded so removed the battery and tried turning it on but it just shows a blank screen after showing the model no. and i CANT enter recovery mode but i can enter odin (but my laptop does not recognize the device,eventhough i have tried installing all the usb drivers and kies ,i dont know if its because of the data cable or windows8 or my phone ) so i removed my external sd copied all my files and saw (in mini tool partition wizard)that my 2nd partition was full(512 mb)i didnt know what to do and i formatted everything(sd).
i dont know what to do next .someone please help!!!
Click to expand...
Click to collapse
So you can actually enter the "download" mode. Thats good at least.
Win 8 comatible driver --> Samsung 1.5.27.0
Which version of odin do you use? This will wotk for you --> Odin 3.07
thanks 4 quick reply
THANKS FOR THE REPLY!!!!!
I HAVE THE USB DRIVER 1.5.23 and still the phone wont work.
actually i have both odin1.85 and 3.09
glenzac said:
THANKS FOR THE REPLY!!!!!
I HAVE THE USB DRIVER 1.5.23 and still the phone wont work.
actually i have both odin1.85 and 3.09
Click to expand...
Click to collapse
Check under device manager if it shows usb device with yellow triangle while phone is connected to computer (Be sure to set show all devices)
yes
LS.xD said:
Check under device manager if it shows usb device with yellow triangle while phone is connected to computer (Be sure to set show all devices)
Click to expand...
Click to collapse
when i used to connect the phone it would show "usb device not recognized".i tried reinstalling the usb drivers but no use.
glenzac said:
when i used to connect the phone it would show "usb device not recognized".i tried reinstalling the usb drivers but no use.
Click to expand...
Click to collapse
you have to force the installation. Right mouse on device. Install driver. select driver manually. (you have to xtract the driver files from the installer first) show "incompatible" devices --> musg be sth like "USB composite device"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
k
LS.xD said:
you have to force the installation. Right mouse on device. Install driver. select driver manually. (you have to xtract the driver files from the installer first) show "incompatible" devices --> musg be sth like "USB composite device"
Click to expand...
Click to collapse
im sorry i havent understood what you said, can you PLEASE explain it in a detailed manner
glenzac said:
im sorry i havent understood what you said, can you PLEASE explain it in a detailed manner
Click to expand...
Click to collapse
device manager shoes "unknown device" with a yellow triangle?
glenzac said:
HEY GUYS !!
I am new to xda so im not sure if i have posted it at the right place.
anyway, my phone (galaxy pocket GTS5300) is rooted runs on infuzion 2 kernel and has hydroperia v2 custom rom(i followed the instructions from xda)
so recently i wanted to increase its ram so i partioned my external sd and installed swapper 2 (just like the post in xda),everything went all right
then i downloaded "file2sd"" from play store and installed it to gets some space in my phones internal memory but as i opened the app and selected
the format as ext3 the said i have to reboot and i pressed the "" restart now ""button,thats it and the phone just got stuck i waited for some time no buttons responded so removed the battery and tried turning it on but it just shows a blank screen after showing the model no. and i CANT enter recovery mode but i can enter odin (but my laptop does not recognize the device,eventhough i have tried installing all the usb drivers and kies ,i dont know if its because of the data cable or windows8 or my phone ) so i removed my external sd copied all my files and saw (in mini tool partition wizard)that my 2nd partition was full(512 mb)i didnt know what to do and i formatted everything(sd).
i dont know what to do next .someone please help!!!
Click to expand...
Click to collapse
The Best Solution Is :
Press thanks if It helps
Download CWM From here : http://forum.xda-developers.com/attachment.php?attachmentid=1461120&d=1352197095
Download Stockrom from here : http://www.4shared.com/zip/SZzB-egN/S5300XXLF5_S5300BTULF1_BTU.html
Put both zips in your sd card
go to recovery mode by pressing vol up + home button + power button (Hold for 10 seconds)
Now in recovery mode select apply update from sd card and select cwm file...
Now in cwm mode again go to apply update from sd card ...
Select Stock ROm ZIP...
You will now boot normally
N'ayam Amarsh'e said:
Download The Samsung Unbicking Software from Here http://forum.xda-developers.com/showthread.php?t=1153310 and try it out and if it works press thanks button and also of the creator of this software....
Click to expand...
Click to collapse
Have you tried this before? I did --> no success at all, its made for Galaxy S. Sure try it out
PM me if ya want something-...
further?
LS.xD said:
device manager shoes "unknown device" with a yellow triangle?
Click to expand...
Click to collapse
ok i am working on it
if at all it works what am i to do next?
what all files should i have?
LS.xD said:
Have you tried this before? I did --> no success at all, its made for Galaxy S. Sure try it out
PM me if ya want something-...
Click to expand...
Click to collapse
It's edited now....
glenzac said:
ok i am working on it
if at all it works what am i to do next?
what all files should i have?
Click to expand...
Click to collapse
you have extracted samsung drivers in a folder on your desktop????
right mouse button on unknown device - install driver - searh pc for drivers -> show list -> select folder where the samsung driver is stored -> unmark "compatible devices" and then you can manually select a device if it shoes not compatible -> ignore just install
before we fill 20 more pages may be you can install "gtalk"?
what next???
N'ayam Amarsh'e said:
It's edited now....
Click to expand...
Click to collapse
the soft brick software will not do as i can access odin
so can someone please help me to go ahead with odin
what files would i require?
also there is another major problem my phone wont charge.the second i connect the charger the phone tries to turn on and returns back to the black screen,
please help
glenzac said:
the soft brick software will not do as i can access odin
so can someone please help me to go ahead with odin
what files would i require?
also there is another major problem my phone wont charge.the second i connect the charger the phone tries to turn on and returns back to the black screen,
please help
Click to expand...
Click to collapse
MAN did you installed driver as i said? when its showing Samsung USB comosite device --> flash stock rom with odin. S5300 Stock firmwares make sure to have your region
Your phone has to b connected in "download" mode (by pressing the 3 button combo)
If you cant enter download mode? release battery and connect phone to pc with usb cable then press Vol- and home and power and put back in battery while. Your computer should get the device.
you flash stockrom using odin.
Sry for that complicated chat, but its not that easy using a browser based chat for that. Also you got more then 1 person tell what to do. Seems not workin that good...
So if something is still not cleat, may be install GTalk for easier chat or teamviewer that i can "show" what i mean.
regards
no luck
LS.xD said:
MAN did you installed driver as i said? when its showing Samsung USB comosite device --> flash stock rom with odin. S5300 Stock firmwares make sure to have your region
Your phone has to b connected in "download" mode (by pressing the 3 button combo)
If you cant enter download mode? release battery and connect phone to pc with usb cable then press Vol- and home and power and put back in battery while. Your computer should get the device.
you flash stockrom using odin.
Sry for that complicated chat, but its not that easy using a browser based chat for that. Also you got more then 1 person tell what to do. Seems not workin that good...
So if something is still not cleat, may be install GTalk for easier chat or teamviewer that i can "show" what i mean.
regards
Click to expand...
Click to collapse
sorry for responding late i tried all that you said but no luck.
i am beginning to suspect it is the problem of the cable or of the phones jack
Hey ,
Just install Kies and uninstall that USB driver . Download files exept .pit and try again . If boot is force closing , go to recovory mode . It should work . Worked in my case
Sent from my GT-S5300 using xda app-developers app
sorry everyone for the late reply
I had gone on a long trip on my way back I also bought an USB cable then it worked perfect ,and I flashed stock Rom with Odin. Alright
Thanks
Now I have a new query can I upgrade my galaxy pocket to jelly bean.
Please help

[SOLVED] P880 soft bricked recovery, & no computer to flash... What to do?

I recently acquired an LG P880. It's a neat little phone that can even be flashed with KitKat.
I was looking to flash a Cyanogen nightly over it,which reportedly ran amazingly.
I tried to do this from the old TWRP that it came with. It was version 2.20 I believe.
I kept running into an error, which a quick Google search revealed was due to an old version of TWRP. Because I don't have a computer handy, I couldn't flash TWRP over via PC. So I opted to flash over PhilZ Recovery. (philz_touch_6.48.4-p880.zip)
I flashed this from the old TWRP. Soft bricking the phone.
The recovery is totally busted. Even though it said that it flashed successfully and suggested I reboot the phone.
When I go into PhilZ recovery when I click or touch something or select any action the screen only flashes for an instant and sometimes I get the error repeatedly: "Aroma file manager not found - clockworkmod/aroma/aroma.zip not found"
I can't select anything. The only thing I can do is reboot. Not a single option works at all.
So basically my recovery is bricked. I also have no operating system on the phone so I can't reflash recovery that way. I won't have a computer for 2 months either (I'm travelling the world) so is there ANYTHING I can do with just this phone and another phone to reflash the recovery of at least put an OS on the phone or something?
Does anyone have any ideas? I am currently in the process of uploading a video detailing the problem.
leijonasisu said:
I recently acquired an LG P880. It's a neat little phone that can even be flashed with KitKat.
I was looking to flash a Cyanogen nightly over it,which reportedly ran amazingly.
I tried to do this from the old TWRP that it came with. It was version 2.20 I believe.
I kept running into an error, which a quick Google search revealed was due to an old version of TWRP. Because I don't have a computer handy, I couldn't flash TWRP over via PC. So I opted to flash over PhilZ Recovery. (philz_touch_6.48.4-p880.zip)
I flashed this from the old TWRP. Soft bricking the phone.
The recovery is totally busted. Even though it said that it flashed successfully and suggested I reboot the phone.
When I go into PhilZ recovery when I click or touch something or select any action the screen only flashes for an instant and sometimes I get the error repeatedly: "Aroma file manager not found - clockworkmod/aroma/aroma.zip not found"
I can't select anything. The only thing I can do is reboot. Not a single option works at all.
So basically my recovery is bricked. I also have no operating system on the phone so I can't reflash recovery that way. I won't have a computer for 2 months either (I'm travelling the world) so is there ANYTHING I can do with just this phone and another phone to reflash the recovery of at least put an OS on the phone or something?
Does anyone have any ideas? I am currently in the process of uploading a video detailing the problem.
Click to expand...
Click to collapse
Check an app called flashify, you can flash recovery with it in ROM. So download whatever recovery you want for our phone and flash it in. I hope this will resolve you problems, ofc you have to be rooted
If your recovery is broken in the way you say it, there is nothing you can do without a PC.Just go to a cybercafe and restore to stock ROM using lg mobile support tool.Won't take any longer than 1 hour (with downloading etc. included)
Hi thanks for your suggestion but I think you missed the part where I don't have an operating system on the phone.
The phone has a broken/bricked recovery and no OS. So when I turn I on normally it just boot loops because it has nothing installed. So I don't have a way to do that either.
I was hoping for something like pushing an auto execute script to SD card that flashes the recovery the moment the SD card is mounted or something...
So I made some progress.
I can access a terminal emulator in PhilZ recovery and the Aroma File Manager. But I can't install a .zip from either of them And when I try and run 'su' I get permission denied (obviously not rooted). Same when I run 'adb'. Which is weird because I can make new folders and move files to the root folder '/' in aroma. I just can't do that via terminal emulator :/ =(I was thinking about installing a recovery.img via that, which was pushed to the /sdcard)
There's an' install' command available but I don't think that will help. It seems for some reason the recovery hasn't got the correct screen resolution for my phone. Everything is squished and I have to tap on blank parts of the screen where apparently the keyboard is, but in actuality it's showed far above squashed into the side of the screen...
So, so far all I have is a terminal emulator (with no root) and a file manager with root (supposedly).
Picture here: http://imgur.com/LcClAL1
You need pc for that, try fastboot method if that possible in your case.
Ok so if I can somehow get access to a computer. How do I go about doing this?
I want the latest cyanogen nightly on the P880. (I have 16/12 which is good enough). Also I obviously need a custom recovery. So if PhilZ doesn't work. Maybe TWRP?
What divers and etc do I have to worry about if I only have an hour? I'd rather download the files on my phone and just quickly use them when I get the chance on a PC.
Does anyone know the flashing process for LG? (I only have had Samsung phones in the past)
The bottom guide on this: http://teamw.in/project/twrp2/240 states that the phone needs to be in 'Debugging Mode' but I don't have an OS on the phone to put it in debugging mode...
So I guess I need a computer too that I have access to cmd.exe
That's not going to be easy where I am... Most places (if I can even find one) will probably have that disabled to users.
Search for FASTBOOT method on forum or with google to flash recovery, i use cwm recovery and i suggest you to install cwm.
I will sent you pm where to download cwm recovery file for LGP880.
And than it will be easy to install os. First do that and we will see.
You need ADB drivers for pc, you need LGP880 driver from official website.
@leijonasisu
I'm gonna help you out only because you have limited access to PC.
Download LG mobile support tool http://lg-support-tool.en.lo4d.com/ install usb driver of 4x hd with phone not being plugged into PC
Click options > "restore from update error (best translation I Can come up with) and wait till it's done
Root your phone (I think I used this to root before http://forum.xda-developers.com/showthread.php?t=2230934 ONLY ROOT DONT DO ANYTHING ELSE)
I'm using http://forum.xda-developers.com/showthread.php?t=2481929 adam's twrp recovery even though I don't use multirom it's installation etc. is simple imo.
Download flashify from play store and flash the ".img" file (TWRP).
Wipe dalvik cache, cache, data, system and flash the CM nightly.
If you want to thank me for this post, do it by helping other people out.
Thanks for the replies. I've added thanks. Unfortunately the only access I can get to a computer currently is an iMac without Admin privileges. Any attempt to install anything or install 'adb' or reboot into 'fastboot' requires a password which I don't have.
Life seems to be laughing at me.
I got access to a computer and followed the LG Mobile Support Tool steps. But I keep getting this error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The phone is in S/W Upgrade mode. Connected via USB and I have tried multiple USB ports.
I installed the drivers from the LG support site for the P880. It finds the phone, but can't verify what it is. So I put the IMEI number (or mode and #SN) in and it goes to check Windows version and conflicting programs and then gives that error.
Is there some other way I can flash this thing with a new Firmware, or at least a new Recovery?
Also the phone seems to have that yellow triangle next to something called "APX" and when that APX is in Device Manager the screen is just black (Not S/W Mode)
Also if I try and turn the phone on normally (where the charging battery comes up) there's a device "Android" that pops up for a second with another yellow triangle in Device Manager.
So it seems that the Fastboot driver or something isn't installed?
Guys can you please help me out. I only have access to this computer for 3 days
I also haven't been able to find the device with 'adb devices' from CMD prompt. I don't think the ADB driver is installed or something and I can't find it to do 'adb reboot oem-unlock' :/
P.S. My Bootloader IS Unlocked.
Follow thsi tutorial,
http://forum.xda-developers.com/showthread.php?t=2069723
Good Luck
Hi there, thanks so much for your reply.
When I try do follow that tutorial I get this error:
I've tried:
1. These drivers (and other kinds):
2. Different USB cables
3. Different USB ports.
4. Modem disabled, and then modem enabled in Device Manager
5. Rebooting
6. Laptop has latest updates, MSXL, NET Framework etc. etc. etc.
Nothing sees to be working. It cannot find my phone.. I guess it is a driver issue or something because when the phone is in S/W mode it simply cannot be detected by the flashing programs.
When I install those drivers. 3 devices pop up. They all install without any problems, but for some reason those programs still can't see this phone.
This is getting ridiculous. What am I missing here?
P.S. Before you ask, I have been googling around before asking here. Maybe these problems seem small and easily fixable to some of you but to be honest they are wasting my days away, nothing seems to be working and my girlfriend is getting furious at me.
I only have 2 days left with a computer until I am without one again for over a month...
I just saw on xda that someone had simillar problem to yours and the problem was in pc...
And another solution is
I was found this on net.
"Often you may require an update for the OS in your pc. Check windows update for a google fastboot update. I had the same issue and after installing the update it worked fine - I'm running win 7 ultimate. Also disable both LG modem drivers in your device manager so it will pick up the phone itself rather than see it as a modem accessory. "
leijonasisu said:
Hi there, thanks so much for your reply.
When I try do follow that tutorial I get this error:
I've tried:
1. These drivers (and other kinds):
2. Different USB cables
3. Different USB ports.
4. Modem disabled, and then modem enabled in Device Manager
5. Rebooting
6. Laptop has latest updates, MSXL, NET Framework etc. etc. etc.
Nothing sees to be working. It cannot find my phone.. I guess it is a driver issue or something because when the phone is in S/W mode it simply cannot be detected by the flashing programs.
When I install those drivers. 3 devices pop up. They all install without any problems, but for some reason those programs still can't see this phone.
This is getting ridiculous. What am I missing here?
P.S. Before you ask, I have been googling around before asking here. Maybe these problems seem small and easily fixable to some of you but to be honest they are wasting my days away, nothing seems to be working and my girlfriend is getting furious at me.
I only have 2 days left with a computer until I am without one again for over a month...
Click to expand...
Click to collapse
Easiest would be to try on different computer, I have same problems on laptop, so I have to use family PC for thins like that. Just install drivers on it run kdz flashing and that is it
Thanks for both of your replies. I have one other computer I can try here for this last day, I will try that. It's a PC.
I'll install the latest drivers for the P880 from the LG support site, then disable any 'modem' stuff in Device Manager and try flashing the .kdz again.
I can't believe this has been so much trouble.. It is true that currently I am trying to do this on a laptop, perhaps a PC is what I need.
This laptop has Windows 8.1 and the PC has Windows 7. Perhaps that will make the difference I need.
Fingers, toes and everything else crossed and deep breaths.
Success finally!!!!!
SUCCESS!!!!​
First I installed the latest drivers for the P880 like I said I would. (With phone unplugged)
I used an i7 Windows 7 Ultimate PC with latest updates.
Here are the devices that were installed:
And in Device Manager:
(I disabled the Modem one and then rebooted before flashing)
This flashing program did NOT work:
(note the .kdz file I used to flash for reference (it works))
So I tried this flashing program:
(note the options I selected etc. and EMERGENCY MODE)
WARNING!! IT WILL POP UP WITH AN ERROR SAYING #SERVER NOT FOUND# (this error window was hidden on the left side of the image/screen)
YOU MUST NOT CLICK 'OK' OR THE FLASHING WILL STOP. IT IS STILL ACTUALLY FLASHING IN THE BACKGROUND
Waaaaiitt...
When the process stops, the program crashes (as shown in above picture)
BUT SUCCESS!!! THE PHONE IS REBOOTED AND FLASHED TO STOCK!!
(my friend's camera sucks)
Now I just root with Towelroot or whatever.
Install flashify and then install CWM and then I flash over to Cyanogen 4.4 Nightly!
I LOVE YOU GUYS!!!​
Looks like I just needed a PC running Win 7.
P.S. Feel free to use this method in guides or whatever to fix your phone.
Thanks again <3

[HELP] Phone is stuck at Linux Penguin Logo ( Bootloader, Recovery Not Responding)

Good Morning Guys,
I have Redmi 4X 64GB version. The phone has unlocked bootloader and was running on Havoc OS V2.5 and the phone was rooted.
About a week ago the phone is suddenly got into weird state. And i am unable to figure out what to do.
The phone is gotten into Linux Penguin Logo. I am attaching an image with that problem. And also phone in not responding to any physical power+volume button integration. Any combination just takes me to this Penguin Screen. Here are some thing i have already tried to do but not working at all. Although when i connect this device to computer with this Penguin Logo screen it does get detected as fastboot device but so far that isn't helping.
Some tricks that i have already tried but not working:-
1. I have booted my phone into edl mode and installed fastboot rom via miflash tool, and it is successfully installed but after pressing power+volume button it is the same screen as Penguin Logo. [so Not Working]
2. I have opened the phone disconnect the battery and tried some combinations but still no luck.
3. Used every combination with power button as well as connected to pc and used fastboot commands but not working out.
4. TWRP installation get failed. ( will attach the preview).
So, Please anyone has any clue or anyone has ever face this same problem please reach out to me. Any Honect answer will work.
Sorry i am new at writing thread. So if any mistake i am sorry.
Images:
If you still have custom recovery installed then try flashing latest firmware.
i've found this similar having issue video on youtube of Redmi 3S(Appears to be) and how it got solved, please check it here https://www.youtube.com/watch?v=oMZ08qQrqnc
i am not sure if those files are limited to Redmi 3S or can be use on other xiaomi devices but it gives some sort of idea what you should try. and video language i don't understand and maybe you understand maybe not but should be understandable by watching video.
Thanks for replying. But that is the problem i am unable to reach anywhere not bootloader nor recovery. The phone is just showing the linux penguin logo whether you use power and volume combination or you do the same via connecting to pc.
I think he has that download link in description. But that link requires password for opening .rar file. And i do not trust that guy. That file may have some bloatware or virus or something. If you find same file that he has please share that file over here so that i can use it.
Thanks.
SafvanShaikh said:
I think he has that download link in description. But that link requires password for opening .rar file. And i do not trust that guy. That file may have some bloatware or virus or something. If you find same file that he has please share that file over here so that i can use it.
Thanks.
Click to expand...
Click to collapse
Did you solve the problem? I'm stuck in it and after trying all the things (including deciphering that rar file very doubtful, which I did not achieve) I'm empty of ideas
try to put the phone in edl mode...open the phone case and disconnect the battery wire..if u have tweezer then try touching it to testpoints and then plug the usb cable at the same time...a driver will install on ur computer named (qdloader9008)....open miflash tool then try flashing it via the tool...
Time to use Device as Paper Weight
::
victorkorp1999 said:
Did you solve the problem? I'm stuck in it and after trying all the things (including deciphering that rar file very doubtful, which I did not achieve) I'm empty of ideas
Click to expand...
Click to collapse
Sorry Bro, Nothing is working at all. I mean i am IT Engineer and i have tried all things but still no luck. So, my thinking is the boot loader is too much damaged so there is nothing that can be written on it, no TWRP or no any data partition, it's all out of option. I have started using the phone as Paper Weight.
I am still hoping that someone can solve this problem and get back to me. Fingers Crossed
Thank You.
Not Working, Already tried:
jerry.07 said:
try to put the phone in edl mode...open the phone case and disconnect the battery wire..if u have tweezer then try touching it to testpoints and then plug the usb cable at the same time...a driver will install on ur computer named (qdloader9008)....open miflash tool then try flashing it via the tool...
Click to expand...
Click to collapse
Sorry Bros, Already tried all things that you have mentioned in the post and its not working at all. If somehow we can change the memory storage chip on the phone that contains the bootloader then the phone can come back to its normal form.
Try to turn fastboot if you turn this on then you are on good situation . Boot TWRP and try installing rom again ( with wiping data, cache,vendor,system,dalvik,and might internal storage)
Your problem solved or still u r stuck?
To answer your question, yeah i got it done. Actually where i live, there is repair shop guy that i know he got it done for just 500rs. I don't know how he do that.
Here is my own tested solution for you !
In my case, when i try to install boot logo on Redmi 5 then this happened.
And yet last . i find the great solution by Miassistant
.1. Download Miassistant on PC
2. Download ADB Driver for your Pc
3. Download (Recovery Rom) not Fastboot Rom
5. press volume up + Power for (Miassistant mode)
6. Flash from Miassistant
Thanks for the solution. My device is already fixed, but i this solution can work. If something like this happens in future we can try this out. But i really wanna know what causes this thing to be happened?
Xiaomi Mi 5s Plus stuck in Linux icon FIXED
SafvanShaikh said:
Thanks for the solution. My device is already fixed, but i this solution can work. If something like this happens in future we can try this out. But i really wanna know what causes this thing to be happened?
Click to expand...
Click to collapse
Sorry if this is not the place for post this, but I read a lot of cases that people have their phones stuck in Linux Icon, after a fail installing a ROM, this same case happened to me in a Xiaomi Mi 5 S Plus, one of the devices of Xiaomi, with less support because there were not to much units manufactered.
In mi case, after try to put the device in the fastboot mode, that was impossible I had to put the MI5 s Plus in EDL mode, using the 2 test points pins in the motherboard, and using Miflash for instal a fastboot rom.
I ll explain the steps;
A- Install MiFlash, in your computer, with all the drivers
B-Download a stable Fastboot ROM for your device, you can find it easily in the forums. ( In my case was the "natrium_global_images_V10.2.4.0.OBGMIXM_20190424.0000.00_8.0_global_07f157530a" with MIUI 10 for the Xiaomi MI5 S Plus (natrium) )
C- Put your device in EDL mode
Normally if you are stuck in the linux mode, this is your only solution for put the device in EDL mode, use the 2 test points in the motherboard of the phone.
Check in internet, where are located the test pins in your device, is different for every model. ( I attached a image of the 2 test points in Mi 5 S Plus)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For put the device in EDL mode:
1- Disassemble the back cover of your phone
2- Disconect the battery
3- Connect the usb cable to the phone, but not connect yet to the computer
4-Use something metallic, like a clip, wire, or tweezers, and touch the 2 Test points at the same time in the motherboard and while you re touching this 2 points connect the USB to the computer
5-You ll hear the sound in the computer that recognizes a new device conected, after that you can remove the clip or wire from touching the 2 points in the board of the phone
6-Open Miflash and have to appear a device connected like COM...., If don´t appear , you can make the process again (there is no problem if you make the steps with the MIflash open)
7- Select the option Flash all (clean all) in Miflash for install the fastboot rom
8- If some error appears during the installation, check the fastboot rom, I ll try 2 or 3 differents versions before one that was completely installed without error
9- If the installation is correct, your phone will be restart, and take some minutes for the first boot after the installation.
In my case, with this device and other Xiaomi devices, to put the phone in EDL mode, and install a stable official fastboot rom, was the only solution for this kind of software problems, I hope this post help someone
bro i have the same problem i need get my data how can i get back please help i have my grandmother lst pics in it
SafvanShaikh said:
To answer your question, yeah i got it done. Actually where i live, there is repair shop guy that i know he got it done for just 500rs. I don't know how he do that.
Click to expand...
Click to collapse
bro data recover hoaa ke nahi please tell me
SafvanShaikh said:
To answer your question, yeah i got it done. Actually where i live, there is repair shop guy that i know he got it done for just 500rs. I don't know how he do that.
Click to expand...
Click to collapse
without data loss..., please fast reply given my redmi 3s prime mobile this type problem I attached charging and show bird logo no any start... please contact me 9106142185

Categories

Resources