Hello friends! It is your asking someone lay there, or give the link! very necessary - 4.4.2_KitKat for CWM
killov1982 said:
Hello friends! It is your asking someone lay there, or give the link! very necessary - 4.4.2_KitKat for CWM
Click to expand...
Click to collapse
If you are looking at CWM recovery then you can use Philz Recovery that works on both 4.4.2 and 5.0.1 from the below link
http://forum.xda-developers.com/gal...overy-cwm-6-0-5-1-philz-touch-6-57-9-t2888674
I blame for all my knowledge of English! I asked what is the link to Rom based on the katabatic TW KitKat which can be set via CWM
killov1982 said:
I blame for all my knowledge of English! I asked what is the link to Rom based on the katabatic TW KitKat which can be set via CWM
Click to expand...
Click to collapse
Oh! you are looking for a TW kitkat ROM.
If you want you could try out my super wizcyan ROM (4.4.2 link in post #3). You may require the kitkat firmware/modems for working WiFi or you could try the KT kernel for kitkat ported by spegelius.
Related
Hi all,
I'm new in this forum. Now I'm already with ultimate v5.1 and want to upgrade to 4.1.2 Stock deodexed and rooted XXLSZ. I just want to make sure I can flash this rom directly in CWM with 3 wipes. Also, the Philz Kernel in ultimate v5.1 is safe, right? Hope someone can help.
Thanks.
Frankie
wannnnnabe said:
Hi all,
I'm new in this forum. Now I'm already with ultimate v5.1 and want to upgrade to 4.1.2 Stock deodexed and rooted XXLSZ. I just want to make sure I can flash this rom directly in CWM with 3 wipes. Also, the Philz Kernel in ultimate v5.1 is safe, right? Hope someone can help.
Thanks.
Frankie
Click to expand...
Click to collapse
why not use the 5.2 instead?
yes its safe,, use the option of "Clean before new rom flash" in Philz settings to completely clean the old rom.. take backups of whatever you want
jay185 said:
why not use the 5.2 instead?
Click to expand...
Click to collapse
The Note of my wife runs not smooth. Maybe installed too many apk. It's seems some issues with 5.2 and I would like to try the rom which make by eybee1970.
hi
i am using [03-03-2013] JZO54K.N7000XXLSZ.zip (872.43MB) base on thaidai stock deodexed rom and rooted with cwm 6()n7000 v4.63 safe stock kernel.. otherwise i have no problem with this rom. i want to know can i flash add mod by eybee like inkeffect, 4 way reboot etc. if yes then how?
help pls
thanks
amanverma17 said:
hi
i am using [03-03-2013] JZO54K.N7000XXLSZ.zip (872.43MB) base on thaidai stock deodexed rom and rooted with cwm 6()n7000 v4.63 safe stock kernel.. otherwise i have no problem with this rom. i want to know can i flash add mod by eybee like inkeffect, 4 way reboot etc. if yes then how?
help pls
thanks
Click to expand...
Click to collapse
Yes, you can. You need to install the different zips (I remember three packages from eybee) in recovery.
Follow the instructions in eybee's thread. Please make a backup of your system in recovery first - if something goes wrong, you can restore it.
thanks
thanks thaidai for prompt reply
Hello,
I want to install Kitkar 4.4 on my Samsung Galaxy Note GT-N7000(India).
I'm completely not aware for this android installation. So please help me.
Please tell me steps and download links. I tried steps which is i got fro internet but most of the time file location was banned by government or removed. So again tried with CWM but still i got stuck. Now I'm using Android Jelly Bean 4.1.2, Build no- JZO54K.N7000DLSC, Kernel version- 3.0.31-906407(SMP PREEMPT WED MARCH 6 19:53:40 KST 2013). This is my phone details. Please suggest me for this model.
Thanks in advance.
Rahul.
I use Firefox with anonimox extesion to bypass the banned's site... But i'm in Italia. You Can try.
The Step to install kilkat are:
Install The correct philz kernel version.
Install the raw kernel and reboot the recovery.
Full wipe.
Install the 4.4 Rom
Install the gapps.
Wipe cache and dalvik
Roboot.
Inviato dal mio GT-N7000 utilizzando Tapatalk
try cm11 by herna (try the latest built by frantisheq) really stable and smooth
btw: full wipe means wipe data, wipe cache, wipe dalvik and manually format /system.
Sent from my GT-N7000 using XDA Premium 4 mobile app
I've tried to install 4.4 kitkat on my note n7000 too but there are too much cusrom, such as asylum,omnirom, cyogenmod and much recovery mode like cwm,twrp, this is make me so frustating, what to choose what to install? If anyone can guide newbie like us step by step and also the link, the best step that never make our phone brick
just stay away from Stock ICS kernel (dont wipe anything using stock ics recovery)
then root your rom and make a backup of your efs (this is the most important step)
now each thread contains all the steps you need to follow, just read them carefully)
I advice you to try herna cm11 (very stable)
regards
Sent from my GT-N7000 using XDA Premium 4 mobile app
done install philz kernel+safe kernel for my JB 4.1.2 and supersu 1.89. Want to install kitkat 4.4 but don't know where to start :crying:
aphinxwu said:
done install philz kernel+safe kernel for my JB 4.1.2 and supersu 1.89. Want to install kitkat 4.4 but don't know where to start :crying:
Click to expand...
Click to collapse
Ok my friend
I use this method to install cm 11 4.4 kitkat
1- I install philz kernel+safe kernel for my JB 4.1.2
2- I install cm 10.2 (4.3) or cm10.1 (4.2.2)
3- I install cm11(4.4)
It work to me and I install 3 kitkat rom
Or as he is already on philz kernel, just flash raw kernel reboot recovery and flash omnirom or asylum omnirom or Nameless Rom or DU or SlimKat
Sent from my GT-N7000 using Tapatalk
Dawood Al Amri said:
Ok my friend
I use this method to install cm 11 4.4 kitkat
1- I install philz kernel+safe kernel for my JB 4.1.2
2- I install cm 10.2 (4.3) or cm10.1 (4.2.2)
3- I install cm11(4.4)
It work to me and I install 3 kitkat rom
Click to expand...
Click to collapse
So if i want to install kitkat, after i install philz kernel then i directly install cm11 (4.4) ? why you install 3 kitkat rom?
treacherous_hawk said:
Or as he is already on philz kernel, just flash raw kernel reboot recovery and flash omnirom or asylum omnirom or Nameless Rom or DU or SlimKat
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
sorry i'm newbie, how to flash raw kernel? flash is mean install? sorry stupid question.
aphinxwu said:
So if i want to install kitkat, after i install philz kernel then i directly install cm11 (4.4) ? why you install 3 kitkat rom?
Click to expand...
Click to collapse
I mean if you want to install kitkat in your phon and you have 4.1.2 by recovery philz you must install cm10.2 Jely been 4.3 after you install 4.3 you can install 4.4 kitkat
I use this method and I install 3 rom kitkat
Dawood Al Amri said:
I mean if you want to install kitkat in your phon and you have 4.1.2 by recovery philz you must install cm10.2 Jely been 4.3 after you install 4.3 you can install 4.4 kitkat
I use this method and I install 3 rom kitkat
Click to expand...
Click to collapse
wow so much step huh. maybe theres a more shortcut way if dont, i'm gonna take your way
aphinxwu said:
wow so much step huh. maybe theres a more shortcut way if dont, i'm gonna take your way
Click to expand...
Click to collapse
Install this recovery
http://downloadandroidrom.com/file/GalaxyNote/recovery/n7000-CWM-KitKatCompatible.zip
Aftarthat you can install kitkat 4.4.2
Just flash the raw Kernel from this thread:
http://forum.xda-developers.com/showthread.php?t=2397000
Then reboot into recovery directly (DO NOT reboot into system) then flash directly whatever you want of KitKat based ROMs.
Remember to follow the instructions of each ROM that is mentioned in the opening post of the thread.
kaborayyan said:
Just flash the raw Kernel from this thread:
http://forum.xda-developers.com/showthread.php?t=2397000
Then reboot into recovery directly (DO NOT reboot into system) then flash directly whatever you want of KitKat based ROMs.
Remember to follow the instructions of each ROM that is mentioned in the opening post of the thread.
Click to expand...
Click to collapse
thanks you for the link source. it help me cm10.2 is the latest?
Dawood Al Amri said:
Install this recovery
http://downloadandroidrom.com/file/GalaxyNote/recovery/n7000-CWM-KitKatCompatible.zip
Aftarthat you can install kitkat 4.4.2
Click to expand...
Click to collapse
is this recovery support kitkat nameless? i would like to install nameless. thank you for the link
Dawood Al Amri said:
Install this recovery
http://downloadandroidrom.com/file/GalaxyNote/recovery/n7000-CWM-KitKatCompatible.zip
Aftarthat you can install kitkat 4.4.2
Click to expand...
Click to collapse
Hey i already follow ur instruction and it works. Thank you. Very happy this is the first time for me changing rom :fingers-crossed:
but there's question i want to ask you, can i still use philz kernel to install rom kitkat? because i prefer philz kernel UI than cwm
Thank you sir
aphinxwu said:
Hey i already follow ur instruction and it works. Thank you. Very happy this is the first time for me changing rom :fingers-crossed:
but there's question i want to ask you, can i still use philz kernel to install rom kitkat? because i prefer philz kernel UI than cwm
Thank you sir
Click to expand...
Click to collapse
as mentioned earlier you need raw kernel to flash omnirom, you will get error if you try to flash using philz kernel.
treacherous_hawk said:
as mentioned earlier you need raw kernel to flash omnirom, you will get error if you try to flash using philz kernel.
Click to expand...
Click to collapse
ooo i understand. what's different between kernel and raw kernel? i install kitkat with cwm it works.
aphinxwu said:
ooo i understand. what's different between kernel and raw kernel? i install kitkat with cwm it works.
Click to expand...
Click to collapse
Raw kernel has SElinux support and that is required to be able to flash kitkat.
treacherous_hawk said:
Raw kernel has SElinux support and that is required to be able to flash kitkat.
Click to expand...
Click to collapse
so cwm is raw kernel too. How we know what kernel is support SELinux? So, if i dont instal philz kernel on my official stock rom before and then directly install cwm, so after that i can install kitkat ?
aphinxwu said:
so cwm is raw kernel too. How we know what kernel is support SELinux? So, if i dont instal philz kernel on my official stock rom before and then directly install cwm, so after that i can install kitkat ?
Click to expand...
Click to collapse
raw kernel r4 is cwm while r5 is TWRP. To root and get custom recovery for your stock rom,you must flash philz kernel. Once you have philz kernel, reboot recovery and from there flash r4 or r5 kernel and again reboot recovery and then do the wipes and flash any kitkat rom with gapps. Kernel with SELinux support are raw kernel, r4 and r5, Asylum kernel http://asylumrom.com/Asylum/Asylum-Roms/KitKat-4.4/N7000/kerner/.
i installed philz recovery yesterday after which i bricked my n7000 while i tried installing the C-Rom .
I just now used ODIN to get back to my STOCK ROM that is 2.3.6.
Its really interesting to see how i can just go back to the first firmware my phone came with :angel:
Please suggest me a combination of a custom recovery & a custom ROM without getting bricked .
as im new to this open source & trying new things for my phone ,i would like to try something according to your experiences .
Something which is stable ,smooth and latest !!
Thanks !!
i have read many many posts and whenever i try to install any recovery, i get E:verification failed !!
what am i doing wrong !! Please help !!
rajk53 said:
i installed philz recovery yesterday after which i bricked my n7000 while i tried installing the C-Rom .
I just now used ODIN to get back to my STOCK ROM that is 2.3.6.
Its really interesting to see how i can just go back to the first firmware my phone came with :angel:
Please suggest me a combination of a custom recovery & a custom ROM without getting bricked .
as im new to this open source & trying new things for my phone ,i would like to try something according to your experiences .
Something which is stable ,smooth and latest !!
Thanks !!
i have read many many posts and whenever i try to install any recovery, i get E:verification failed !!
what am i doing wrong !! Please help !!
Click to expand...
Click to collapse
While on GB you cannot install any kernel from recovery.. only using Odin. . You have to be either on ICS or JB to be able to follow Philz kernel install steps.
nokiamodeln91 said:
While on GB you cannot install any kernel from recovery.. only using Odin. . You have to be either on ICS or JB to be able to follow Philz kernel install steps.
Click to expand...
Click to collapse
First of all, Thanks a lot for your reply. Now i understand why and how my several attempts failed
now i clearly understand that if im on JellyBean , then i can install kernel from recovery.
I just updated my phone to JellyBean using the official update option in the phone.
Can you please direct me to the right link to install kitkat rom from using odin .
rajk53 said:
First of all, Thanks a lot for your reply. Now i understand why and how my several attempts failed
now i clearly understand that if im on JellyBean , then i can install kernel from recovery.
I just updated my phone to JellyBean using the official update option in the phone.
Can you please direct me to the right link to install kitkat rom from using odin .
Click to expand...
Click to collapse
KK cannot be installed using Odin as its a custom rom.. As you are on JB, root it using one of the Philz kernels matching your rom build number (post 3 or Philz thread TW).. The flash raw r4 kernel, boot into its recovery and then flash KK roms.
nokiamodeln91 said:
KK cannot be installed using Odin as its a custom rom.. As you are on JB, root it using one of the Philz kernels matching your rom build number (post 3 or Philz thread TW).. The flash raw r4 kernel, boot into its recovery and then flash KK roms.
Click to expand...
Click to collapse
Thanks a lot for the information
I checked the link ,i found this kernel to be matching with my build number.
PhilZ-cwm6-XXLRK-XEU-v2.7
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !
rajk53 said:
Thanks a lot for the information
I checked the link ,i found this kernel to be matching with my build number.
PhilZ-cwm6-XXLRK-XEU-v2.7
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !
Click to expand...
Click to collapse
And I can add an old baby bottle for free...
ThaiDai said:
And I can add an old baby bottle for free...
Click to expand...
Click to collapse
Please kindly just reply by answering the specifically asked question regarding the kit kat rom.
I am in a confused state as i can see there are a huge amount of ROMs available many are nightly made, which say them to be not in a stable state.
Found the SlimKat in the forum ,downloading the ROM SlimSaber-n7000-4.4.2-20140531.zip 139mb
Installation instructions..
Download the latest build from [here]
Gapps ( if you don't have it already) from [here]
!Recommended! Full wipe, and manual format /system
Flash ROM and the gapps you want, reboot
Maybe a silly question but ,Do i need to download the gapps files & why ??
rajk53 said:
Please kindly just reply by answering the specifically asked question regarding the kit kat rom.
Click to expand...
Click to collapse
Please kindly start to grow up and read and learn yourself. Do not expect spoon-feeding from other members.
This is a development forum. It is not expected that you are a developer but it would be a sign of respect to read their threads and follow their instructions - they spent a lot of their time writing them. And if you not understand then try to use the search.
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !
Click to expand...
Click to collapse
Not one of these questions show anything of this:
the first is part of the installation instructions.
the second can be found with the search (and was answered thousands of times)
the third is simply against XDA rules
To flash a kitkat rom, the recovery needs to be compatible with SE linux.
The recovery is part of a kernel
To flash a kitkat rom you need to flash a recent kernel first.
Try flashing raw kernel r4,r5, or Forest-CM11. it does not matter that they are incompatible with your current or future roms, they will get overwritten when you flash a rom (roms include kernels).
Then reboot recovery or restart phone and enter recovery again.
Then you wipe cache, data, and system.
Then flash the kitkat rom of choice.
gapps
Azeazezar said:
To flash a kitkat rom, the recovery needs to be compatible with SE linux.
The recovery is part of a kernel
To flash a kitkat rom you need to flash a recent kernel first.
Try flashing raw kernel r4,r5, or Forest-CM11. it does not matter that they are incompatible with your current or future roms, they will get overwritten when you flash a rom (roms include kernels).
Then reboot recovery or restart phone and enter recovery again.
Then you wipe cache, data, and system.
Then flash the kitkat rom of choice.
Click to expand...
Click to collapse
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?
rajk53 said:
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/search.php?searchthreadid=2770097
rajk53 said:
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?
Click to expand...
Click to collapse
https://source.android.com/
Good Day,
I want to ask if I can directly install a custom ROM on my GT-N7000 running on stock anrdoid Gingerbread.
Thank you.
chiechieyap said:
Good Day,
I want to ask if I can directly install a custom ROM on my GT-N7000 running on stock anrdoid Gingerbread.
Thank you.
Click to expand...
Click to collapse
Yes..
Flash Phil jb kernel using Odin... Then use that recovery to flash a cm11 kernel like raw kernel.. Then flash the kitkat rom... You should make the backup of your current rom if you want before installing the newer OS kernel.
Thanks for the reply. Can you give me the links so I can make the procedure. And also what is the latest stock rom for the GT-N7000? Thanks.
Just check the development section of xda n7000.. All links are there and for latest jb rom you can check samfirmware.com