HELPME HELPME PLEASE... Good people I have a lg vs980 is I go into fastboot mode estarted but so many things that i put ( commands) with ADB 's note that erased many things with the commands. does not light anything. just when I connect to the PC.I get this: Qualcomm HS-USB QDLoader 9008 (COM17) I think delete the contents of all patitions and ADB does not detect. :crying: :crying: :crying:
Related
Hello guys.
So many sorry about my English.
I tried everything.
And you my last chance.
On my hands LG L90 D415, stuck on Qualcomm HS-USB QDLoader 9008.
It was rooted with CWM.
Mistakenly was installed wrong firmware (probably from D410)
Now phone with black screen and only responds in device manager like Qualcomm HS-USB QDLoader 9008(no recovery, no download mode).
LG Flash tools do not responds.
All drivers ok.
B2bSupport do not helps.
Options on B2bSupport: - Shipset W7 G2MDS, -port like in device manager, -target DIR C:\, -test AP and EMMC
AP check finished with "no response from the device. Check PMIC first and if still boot problem, replace AP" and "Failed to conect to the flash programer".
And i dont know what to do next. If someone has file "loader D415.img" and *.tot files, i will be very grateful.
Please help me!
lg l90 gard bricked
so have you fixed it i have the same problem here and i have those files so just pm me if you see this reply and tell me waht happend and we might fix it together i gesss...
Hi guys,
I have the same problem, the phone's chowing Qualcomm HS-USB QDLoader 9008 in device manager. Please help on how to repair boot
Maybe this helps
Well, I see nothing as of yet. I have been through almost all situations with this phone. I have had this happen to my phone before. Only problem, I don't remember exact fix. I will recommend this forum. http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830 It is for the G2, but I've used several of their threads for my phone. Read post first, but its the best solution I can offer. The only other thing you could try is searching and learning about Qualcomm's QPST program. Hope this helps.... Good luck
I was installing TWRP on my LG L90 D405. Then after reboot it failed to turn on the screen was just black. I thought bout changing the firmware. After formatting I accidentally removed the USB before a flashed any recovery. When I connected again the mass storage file manager didn't show, all I could see was Qualcomm HS-USB QDLoader 9008 on device manager.
Please help :crying::crying::crying:
Hi,
I have a following problem with my Redmi 4X. I tried to flash new rom and reboot my phone on twrp. When the phone shut down nothing happens anymore just black screen. No fastboot or recovery mode. When I contact the phone to Windows pc it shows in device manager: Qualcomm HS-USB Diagnostics 900E (COM20). I have tried to flash new rom with QFIL and Miflash (tried to change the driver to Qualcomm HS-USB QDLoader 9008).
With QFIL the error is: Download Fail: Switch to EDL FailFailed to switch to Emergency Download mode.
With Miflash the error is: Cannot receive hello packet. MiFlash is trying to reset status!
Any suggestions?
https://www.youtube.com/watch?v=uxrhJkSZc6E
Already tried that. Doesn't seem to change a thing.
Shouldn't it turn the driver to "Qualcomm HS-USB QDLoader 9008" after test point method?
This is what shows in command prompt:
C:\Windows\system32>adb reboot edl
error: device '(null)' not found
C:\Windows\system32>adb devices
List of devices attached
C:\Windows\system32>
k4rpp4 said:
Shouldn't it turn the driver to "Qualcomm HS-USB QDLoader 9008" after test point method?
This is what shows in command prompt:
C:\Windows\system32>adb reboot edl
error: device '(null)' not found
C:\Windows\system32>adb devices
List of devices attached
Click to expand...
Click to collapse
After the test point method you will see a new "9008" device in the Device Manager.
Then all of the above commands will be completely irrelevant and useless.
In the 9008 mode use MiFlash, not QFIL/QPST, to reflash your phone.
Cheers!
The test points seems to change nothing. I think that after the " adb devices" command I should see my device listed but that is not the case and therefore impossible to flash rom. Somehow I should be able to change the "900E mode" to "9008 mode" without changing the driver manually and I think the test point method should do just that.
Here is video of what I have tried to do. If someone could point out what to do differently to get the flash work I would be very grateful.
https://drive.google.com/open?id=1aOkb3FCBzanMUW3WSdyuxyQO-33rdsBv
Windows 10 will not accept the 9008 driver because the driversignature ist not signed from Microsoft.
If you will unbrick it with Windows 10 64bit look here: https://www.youtube.com/watch?v=2d8KEruHWPg
and here: https://www.maketecheasier.com/install-unsigned-drivers-windows10/
Had allready done that also. Gave it another try without success
k4rpp4 said:
Had allready done that also. Gave it another try without success
Click to expand...
Click to collapse
Is the Qualcomm 9008 driver now installed?
Did you start the mi-flash tool with administrator privileges?
I installed the Qualcomm drivers but device manager still shows 900E driver unless I manually change it to 9008.
edit:
I finally succeeded with test point method. Now flashing. Im so grateful to you ConradB.
k4rpp4 said:
I installed the Qualcomm drivers but device manager still shows 900E driver unless I manually change it to 9008.
edit:
I finally succeeded with test point method. Now flashing. Im so grateful to you ConradB.
Click to expand...
Click to collapse
Perfect :good:
Bro please help my device in bricked
k23m said:
After the test point method you will see a new "9008" device in the Device Manager.
Then all of the above commands will be completely irrelevant and useless.
In the 9008 mode use MiFlash, not QFIL/QPST, to reflash your phone.
Cheers!
Click to expand...
Click to collapse
Thank you buddy .. Your 4 years old post help me to turn on my hard brick redmi 4x.
I don't know the actual reason of hard brick but The situation was my phone was in condition like
1. Possible to go in fastboot mode
2. When turning on there is only mi logo for fraction of second.
I tried test point method as described . It turned on in one attempt..I just want to add something. I face some issues after test point flashing . So I just flash miui again . Then It's working perfectly fine. After Test point flash check your battery. Maybe fully drained. Just charge it and turn it on..
I am posting this just for Information..
sayan990 said:
Thank you buddy .. Your 4 years old post help me to turn on my hard brick redmi 4x.
I don't know the actual reason of hard brick but The situation was my phone was in condition like
1. Possible to go in fastboot mode
2. When turning on there is only mi logo for fraction of second.
I tried test point method as described . It turned on in one attempt..I just want to add something. I face some issues after test point flashing . So I just flash miui again . Then It's working perfectly fine. After Test point flash check your battery. Maybe fully drained. Just charge it and turn it on..
I am posting this just for Information..
Click to expand...
Click to collapse
I do had same issue with my mobile but even when I tried to flash MIUI I got "ACK count don't match" attached img
Hey everyone,
yesterday my zenfone 8 just shutdown without any sign of a problem before . i thought its nothing but since then it dosnt turn on !!!
my only hope is when i connected it to my pc i got qualcomm 900e , i managed to change it to Qualcomm HS-USB QDLoader 9008 with driver update.
but still no fastboot no nothing.
i understand there is a way with qfil tool but i dont know how to get the files for it. any help please???
i see that qfil can fix it with rawdata and patch0 but i dont have this files. can some one please help???
You can get it on ROMdevelopers
QFIL / UnBrick - QMSCT_ForCSC_DefaultFuseLock_Sake_30.02.46.108_repkg.zip
AzimBahar said:
You can get it on ROMdevelopers
QFIL / UnBrick - QMSCT_ForCSC_DefaultFuseLock_Sake_30.02.46.108_repkg.zip
Click to expand...
Click to collapse
Hey azim , i downloaded the files but it seems it knows that i am on 900e even when i tries to use other drivers to be 9008. can you please assits how to get out of 900e?? btw i managed to get the files out of my device but sahara server failed because of 900e :/
Connect phone to pC using test point and follow guides
Trigger device to 9008 mode-
1. Remove USB cable and battery (Change a new chipset, UFS
should be empty)
2. Connect the battery
3. Device will boot into the emergency download mode
4. Confirm that the device manager has detected “Qualcomm HS-
USB QDLoader 9008 (COM x)”.
& Its may help too
ZS590KS_Keybox_Keymaster_HDCP_Online_Tool_M1220.zip
AzimBahar said:
Trigger device to 9008 mode-
1. Remove USB cable and battery (Change a new chipset, UFS
should be empty)
2. Connect the battery
3. Device will boot into the emergency download mode
4. Confirm that the device manager has detected “Qualcomm HS-
USB QDLoader 9008 (COM x)”.
& Its may help too
ZS590KS_Keybox_Keymaster_HDCP_Online_Tool_M1220.zip
Click to expand...
Click to collapse
I dont understand what i need to do . I even tried with edl cable but still stuck on 900e
Once try to uninstall USB Driver & install ASUS QCOM Driver.
As you said , i managed to change it to Qualcomm HS-USB QDLoader 9008 with driver update
Click to expand...
Click to collapse
After try again !
Note - You May use EDL Cable for EDL mode !
AzimBahar said:
Once try to uninstall USB Driver & install ASUS QCOM Driver.
After try again !
Note - You May use EDL Cable for EDL mode !
Click to expand...
Click to collapse
I tried with edl cable... Only test point left to find
duduhayo said:
I tried with edl cable... Only test point left to find
Click to expand...
Click to collapse
sir i have the same issues, are you know the test point right now?
Kiyori said:
sir i have the same issues, are you know the test point right now?
Click to expand...
Click to collapse
Hey, i wish. No one found it, I am still waiting for the one
I don't really know how to format my post here as I just created my account, but anyway...
Hello, I got my hand on an LG L7 P700 phone that had a black screen but was recognized by my PC as "Qualcomm HS-USB QDLoader 9008".I heard that it was a kind of recovery mode to flash the firmware (thanks to ChatGPT, because searching "why is my ****ing phone recognized as a CPU by my pc (Qualcomm HS-USB QDLoader 9008) when I plug it into my pc?" wasn't helping on Google)So I decided to follow this tutorial (even if it is not the same phone, but the author said it could work): https://forum.xda-developers.com/t/...-emergency-mode-lg-l7-ii-single-dual.3166282/But I guess the "MBR, EBR, and the main bootloaders" weren't the right ones and I was locked out of QDL Mode 9008.So after getting over my devastation, I got the idea to make a side-by-side comparison of the two phones board to find the pin that has the same functionality to get the QDL Mode 9008, and so I succeeded.This post is not a tutorial, but I wanted to put this somewhere in case someone would be in need of it.So here are the services manual, the pin for the P710 was the R3010, I did a Ctrl+F to search what use it was (eMMC_CMD), and searched for what pin did this in the P700 service manual, resulting in the R408 (you can find its location at page 156 of the manual). And also a picture of where it is (red dot).PS: if someone could tell me how I can get that "QDL_9008_L7II.zip" (that you can find here btw) but for the P700, that would be very nice. '
Edit: I do not have the phone anymore, after searching everywhere for the XXXX_msimage.mbn and the patch0.xml file (as I found the flash programmer file and the raw.xml here) I decided to scrap the idea of using this phone as an Octoprint server, I'll see what I can do with something less time-consuming.