Related
Has anyone tried this case? Is it any good? Any problems with it?
http://www.amazon.com/BoxWave-Samsung-Nexus-FlexiSkin-Low-Profile/dp/B004MNO2ZK
aspirex said:
Has anyone tried this case? Is it any good? Any problems with it?
http://www.amazon.com/BoxWave-Samsung-Nexus-FlexiSkin-Low-Profile/dp/B004MNO2ZK
Click to expand...
Click to collapse
Looking at cases I will likely be getting this one for my nexus s
http://www.amazon.com/gp/product/B005698DHM/ref=ox_sc_act_title_1?ie=UTF8&m=ATVPDKIKX0DER
Hope this helps
^ best case evarrrrr..... adds a lil bulk but I can throw my phone across the parking lot and not a scratch on it.
Sent from my IceCreamSammich Nexus S 4G
aspirex said:
Has anyone tried this case? Is it any good? Any problems with it?
http://www.amazon.com/BoxWave-Samsung-Nexus-FlexiSkin-Low-Profile/dp/B004MNO2ZK
Click to expand...
Click to collapse
I'm not sure how that specific one is, but i just got myself their snap-fit shell case (http://www.boxwave.com/samsung-nexu...amsung-nexus-s-snap-fit-shell/bwpdd/tzw-zfkz/) and it looks / feels pretty good on first impression.
I also got their cleartouch crystal screen protector and my screen finally looks gorgeous (like it always had, whenever I'd peel off my old protectors).
the cleartouch protector doesn't reach until the top and bottom edges of the phone - but that's probably a good thing, because the NexS has a curved glass.
amirage said:
I'm not sure how that specific one is, but i just got myself their snap-fit shell case (http://www.boxwave.com/samsung-nexu...amsung-nexus-s-snap-fit-shell/bwpdd/tzw-zfkz/) and it looks / feels pretty good on first impression.
I also got their cleartouch crystal screen protector and my screen finally looks gorgeous (like it always had, whenever I'd peel off my old protectors).
the cleartouch protector doesn't reach until the top and bottom edges of the phone - but that's probably a good thing, because the NexS has a curved glass.
Click to expand...
Click to collapse
sorry - my brother's account was still logged in when I posted that
@Rooster85
It looks like you already have this case. Can you post pictures of it? even empty ones. Is it matte? Or transparent? Also, which SNS model do you have?
I bought this case for my LG D802 Asian, and fits perfect, the size is like my Galaxy S2 + Otterbox, less bulky than an Otter.
I like the black mate and the phone doesn´t slip so easy like when it doesn´t have the case
The case box
Thanks you for the pics!
Do you have screen protector on it?
evasi0n said:
Thanks you for the pics!
Do you have screen protector on it?
Click to expand...
Click to collapse
There is no need of screen protector in this phone, it has Gorilla glass 2.
can you make picture with phone next to it, front and side on flat service?
Sent from my LG-D802
can you post pic of the usb port of the bottom? how big is the cut out?
bachera said:
can you make picture with phone next to it, front and side on flat service?
Sent from my LG-D802
Click to expand...
Click to collapse
The second picture is with the phone near the cover, to have an idea, the G2 with this cover is near the same width of my Galaxy S2 with Otter Box and the depth is exactly the same as my S2 with Otter, the lenght is larger because the phone is larger
banditnich said:
can you post pic of the usb port of the bottom? how big is the cut out?
Click to expand...
Click to collapse
Here it is:
Thanks for the pictures. Looks like the cut is quite wide but a llittle bulky...
Because I still looking for a case which can use along with meenova.
Did you happen using meenova?
Sent from my LG-D802 using Tapatalk
banditnich said:
Thanks for the pictures. Looks like the cut is quite wide but a llittle bulky...
Because I still looking for a case which can use along with meenova.
Did you happen using meenova?
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
I saw meenova, personally I think it will fit ok, its only 1 mm of rubber
Okay thanks for the input citytrader. So if I decided to buy incipio then on their site which carriers should I choose?
I'm using D802 Asian too
Sent from my LG-D802 using Tapatalk
banditnich said:
Okay thanks for the input citytrader. So if I decided to buy incipio then on their site which carriers should I choose?
I'm using D802 Asian too
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
I bought it at ebay at this dealer:
http://www.ebay.com/usr/cellcase4u
My experience was great, my cover arrived to Mexico in 6 days, very fast.
Personally I think that any cover that fits G2 T-Mobile, AT&T or Sprint will fit D802.
The customer support of INCIPIO is horrible, I dont understand why because the case is nice, not bulky like Otterbox, I think is enough to protect the phone.
Try to check at ebay or ask directly to INCIPIO where to buy the DUALPRO T- MOBILE variant, the models I saw are colored, personally I prefer black, but is matter of taste!
Okay... thanks.. will contact the seller then
citytrader said:
Here it is:
Click to expand...
Click to collapse
Yikes, seems like the rubber portion attracts lots of dust/lint (top/bottom) of your pics. Maybe I should get the Spigen instead to avoid that.
rebelx said:
Yikes, seems like the rubber portion attracts lots of dust/lint (top/bottom) of your pics. Maybe I should get the Spigen instead to avoid that.
Click to expand...
Click to collapse
It attacts not lot of dust, in the picture seems worse than really it is, if you pass your hand you will clean it easy.
Personally I dont like the Spigen because its bigger and the hole in the flash is so small that could affect the beam and personally I like more the black mate back of Incipio.
citytrader said:
It attacts not lot of dust, in the picture seems worse than really it is, if you pass your hand you will clean it easy.
Personally I dont like the Spigen because its bigger and the hole in the flash is so small that could affect the beam and personally I like more the black mate back of Incipio.
Click to expand...
Click to collapse
Good point about the flash. I read about it earlier somewhere on this forum, but I didn't think much of it. If the flash isn't properly dispersed, it may very well affect picture quality.
I'm planning on getting the white dual pro to match my white G2 that I'll be ordering soon. Hopefully the grey rubber bottom doesn't show dust/lint as much. I'm mainly concerned not with it being there, but that it might constantly be getting on my hands and may make the case slightly difficult to hold (I had a TPU silicon case for an iPod Touch one time and it was terrible with lint).
Do you think there's enough room on the sides of the case to have a tempered glass screen protector there without experiencing any lifting?
rebelx said:
Good point about the flash. I read about it earlier somewhere on this forum, but I didn't think much of it. If the flash isn't properly dispersed, it may very well affect picture quality.
I'm planning on getting the white dual pro to match my white G2 that I'll be ordering soon. Hopefully the grey rubber bottom doesn't show dust/lint as much. I'm mainly concerned not with it being there, but that it might constantly be getting on my hands and may make the case slightly difficult to hold (I had a TPU silicon case for an iPod Touch one time and it was terrible with lint).
Do you think there's enough room on the sides of the case to have a tempered glass screen protector there without experiencing any lifting?
Click to expand...
Click to collapse
Most of the case is plastic and from my point of view this case is optimal because it does not slip from my hands.
About tempered glass, totally useless in phones with Gorilla Glass and total waste of money, for one side, this type of screen (Gorilla glass) never get an scratch with normal use, for the other this kind of screen degrades the clarity of the G2's wonderfull screen.
I have a Galaxy S2 for two year and still I see one scratch, of course maybe you will found something if you look at the microscope hehehe.... but from the normal eye sight, there is nothing and this is what matter most.
citytrader said:
Most of the case is plastic and from my point of view this case is optimal because it does not slip from my hands.
About tempered glass, totally useless in phones with Gorilla Glass and total waste of money, for one side, this type of screen (Gorilla glass) never get an scratch with normal use, for the other this kind of screen degrades the clarity of the G2's wonderfull screen.
I have a Galaxy S2 for two year and still I see one scratch, of course maybe you will found something if you look at the microscope hehehe.... but from the normal eye sight, there is nothing and this is what matter most.
Click to expand...
Click to collapse
Yea, most likely one doesn't need a screen protector, but even with gorilla glass, I would feel more comfortable with one on there. Never know when I may drop the phone by accident and any additional protection helps. I don't particularly like to see any scratches on my screens, so I know it would bother me if there was on there.
Also, I'd probably get a higher resale value for keeping it in better condition!
I am looking for a screen protector for my BN Turbo. I would prefer a tempered glass solution but am willing to explore other options. Does anyone have one or can offer suggestions for one? Thanks
http://www.ebay.it/itm/291341097569?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
i got these one
danger2u said:
http://www.ebay.it/itm/291341097569?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
i got these one
Click to expand...
Click to collapse
Do you have any pics?
Superman36NYY said:
Do you have any pics?
Click to expand...
Click to collapse
didn t arrive yet
after i received i will put some pics
When I bought my turbo in October or November, I also bought the "flexible glass screen protector for droid turbo" at the Verizon store. It is a little pricey at about $25, but I really like it. They had to order it for me and it was delivered straight to me.
For what it cost, I took it to them and had one of their employees put the screen on for me. I think he did a pretty nice job of it. I have no complaints, other than the high price. ?
As far as I can tell, it has no scratches on it, but, I try not to treat it rough. Also, it is very hard to see any smudges, etc that I get on it.
It did take me a little while to get used to its edges. If you swipe from the very edge of the phone, you can feel the edge. It kind of catches your finger. I have had no problems using it. At the same time I also bought the "Speck" case from them. I like it as well, but, it is also pricey.
Before this, I always used their belt clip. I do miss that, and, "may" one of these days replace the Speck with it. But, I think the glass screen is so much better than the plastic ones.
I would buy the glass screen again. (my opinion only)
Superman36NYY said:
I am looking for a screen protector for my BN Turbo. I would prefer a tempered glass solution but am willing to explore other options. Does anyone have one or can offer suggestions for one? Thanks
Click to expand...
Click to collapse
I just received this one today.
Its not bad for the price.
I was just going to start a thread with the glass screen protectors that I've tried and whether it works or not. but just an fyi, I've used the ez guardz, they admitted to their current model having a design flaw; the edges of the screen protector doesn't adhere. Also the Ghostek I just received today has the same issue. There's one more I'm looking at on eBay and I'm going to stay away from the "flexible screen protectors" as those are the ones made by tech21 and I don't like the feel of them.
Sorry. Wrong thread.
gordonzhao said:
I was just going to start a thread with the glass screen protectors that I've tried and whether it works or not. but just an fyi, I've used the ez guardz, they admitted to their current model having a design flaw; the edges of the screen protector doesn't adhere. Also the Ghostek I just received today has the same issue. There's one more I'm looking at on eBay and I'm going to stay away from the "flexible screen protectors" as those are the ones made by tech21 and I don't like the feel of them.
Click to expand...
Click to collapse
Thanks for the info. I have read the same thing on most of the screen protector Amazon reviews. Everything from improper fit, to breakage, yellowing, dimples & valleys......
I have considered this non-tempered protector: http://www.amazon.com/Skinomi®-Tech...421509415&sr=8-1&keywords=skinomi+droid+turbo Does anyone have any experience with these?
I also sent an email to MIMEUSA because they show link for Turbo products on their site but when clicking on it nothing happens. I will post updates as soon as I hear anything from them
Superman36NYY said:
Thanks for the info. I have read the same thing on most of the screen protector Amazon reviews. Everything from improper fit, to breakage, yellowing, dimples & valleys......
I have considered this non-tempered protector: http://www.amazon.com/Skinomi®-Tech...421509415&sr=8-1&keywords=skinomi+droid+turbo Does anyone have any experience with these?
I also sent an email to MIMEUSA because they show link for Turbo products on their site but when clicking on it nothing happens. I will post updates as soon as I hear anything from them
Click to expand...
Click to collapse
Looks like film, I have their screen protector for my moto 360, first batch was over sized, they then sent me the replacements which were a lot better. I may end up going with tempered glass as well for to 360 but at the time none were available but the film ones, except the Spigen which chipped. I'm not too confident with the ones that are available now.
gordonzhao said:
Looks like film, I have their screen protector for my moto 360, first batch was over sized, they then sent me the replacements which were a lot better. I may end up going with tempered glass as well for to 360 but at the time none were available but the film ones, except the Spigen which chipped. I'm not too confident with the ones that are available now.
Click to expand...
Click to collapse
I know that it's a film protector & not tempered glass. I was wondering if anyone had any luck with it. I was also looking at the iVoler tempered glass sold on Amazon
The iVoler is great, with a few minor caveats:
• Follow instructions to the letter, making sure the screen is immaculately clean. Also, wear rubber gloves if possible. Even a minor trace of skin oils will result in spots that refuse to adhere, so be super careful.
• This particular item ships from Shengzhen, China, and takes about three weeks. Order a spare while you're ordering and waiting so ridiculously long for the item to arrive.
Aside from that, it seems to be just the ticket... It's coated, so it feels slick, stays clean and doesn't show fingerprints.
This company finally has one out, I have it on order today.
http://mimeusa.com/product/droid-turbo-ghost-glass-screen-protector/
reporting back from my last purchase.
Tried this TEMPERED GLASS Screen Protector - Slim 0.33mm Super Hardness - Crystal Clear by COVRWARE - picked it up from amazon for $9.97
The glass itself is nice. It feels like the naked screen. It's a 9H and oleophobic. Unforunately the edge adhesive halos. It's cut slightly short of the edges to in an attempt to deal with the 2.5D screen edges.
you don't notice when the screen is on, but yeah it's not a edge to edge performing adhesive. so i've left it on, as i look for a better screen protector.
i'd love to see how that mime screen protector does.
bookmonke said:
This company finally has one out, I have it on order today.
http://mimeusa.com/product/droid-turbo-ghost-glass-screen-protector/
Click to expand...
Click to collapse
Please post review and pics when you receive/install it
RyanTillery said:
The iVoler is great, with a few minor caveats:
• Follow instructions to the letter, making sure the screen is immaculately clean. Also, wear rubber gloves if possible. Even a minor trace of skin oils will result in spots that refuse to adhere, so be super careful.
• This particular item ships from Shengzhen, China, and takes about three weeks. Order a spare while you're ordering and waiting so ridiculously long for the item to arrive.
Aside from that, it seems to be just the ticket... It's coated, so it feels slick, stays clean and doesn't show fingerprints.
Click to expand...
Click to collapse
Thanks for the info. I placed the order for the iVoler. I'll post review/pics when I receive/install it
Superman36NYY said:
Thanks for the info. I placed the order for the iVoler. I'll post review/pics when I receive/install it
Click to expand...
Click to collapse
Let me know if the edges stick that's really the only issue with most of them on the market right now. I don't even want to show my phone to others because of the parts of the screen protector that doesn't adhere. Waiting on a replacement for my ghostek, if that's the same then I'm off to trying a different one.
The edges on mine are all good, with the exception of two spots where my fingers made contact with the adhesive. My hands were clean and dry, but it apparently doesn't take much to impact the performance of the adhesive. I'd recommend wearing rubber gloves during application... Other than that, it's a great fit, and covers only the flat (non-rounded) surface of the screen.
Ok got the MIME today, typical package and install. Goes on good does not go the the edge but about like the xtreme one I had installed. This one sticks so far and feels way better slickness wise than the xtreme.
bookmonke said:
Ok got the MIME today, typical package and install. Goes on good does not go the the edge but about like the xtreme one I had installed. This one sticks so far and feels way better slickness wise than the xtreme.
Click to expand...
Click to collapse
Interesting there's no cut out for the proximity sensor. Have you had any issues during phone calls? Make a phone call, and hold the phone away from your face. Does the screen still go on?
I want to protect the screen from cracking on an accidental fall and I've had numerous recommendations all different from one another. I've done some research but again I've found conflicting results.
I've heard/read that a hard case is the best bet to protect the screen from breaking on a fall (seems logical), but also (logically) it will increase the thickness and width of the phone. I want to avoid that as best I can as the phone is huge already for me.
I've heard/read that a tempered glass screen protector will offer some form of protection against cracks and breaks of the glass if the phone does fall. Of course not as much as a solid hard case, but better than no cover. I've been told by one person that it will give the phone screen about 50% more strength, someone told me that it will double the strength of the screen, another told me it will do nothing.
I also read stories of having your phone 'treated' (I dont know what that means and I cant find any more info about this) whereby the glass has its strength increased to avoid breaks and cracks.
What is my best option to keep the phone slim and give the glass some kind of protection, without the use of a case? Does anyone have any kind of advice to offer?
A tempered glass protector will help some. Its hard to say how much though. It cant be quantified because screen breaks arent always from direct contact between screen and surface. Best protection would be protector AND case.
I'm getting a ringke slim case in crystal. Its pretty much the thinnest hard case. Maybe it will be slim enough for you.
rootSU said:
A tempered glass protector will help some. Its hard to say how much though. It cant be quantified because screen breaks arent always from direct contact between screen and surface. Best protection would be protector AND case.
I'm getting a ringke slim case in crystal. Its pretty much the thinnest hard case. Maybe it will be slim enough for you.
Click to expand...
Click to collapse
Thanks for the reply; I'll look into the case you mentioned, thank you!
Yes, I thought the tempered glass protector would help but assumed it wouldn't help much/be measurable due to the different ways a phone could break.
Buy a tempered glass screen protector, i bough the one from Yootech on amazon.
Like what others have said, a tempered glass protector is what you're looking for. They're much better than plastic screen protectors.
Tempered offers better protection, feels better in the hand. The only con is that it may not cover all the edges as tempered glass is flat whereas plastic screen protectors can be curved.
http://forum.xda-developers.com/nexus-6/accessories/tempered-glass-screen-protectors-t2922645 is a thread where you can read up on whats available.
Some of the big names are: Jelly Comb, Ghostek, and some others.
I'm not sure how protective a "skin" is but it could be somewhat handy, the big names would be dbrand and slickwraps.
zephiK said:
I'm not sure how protective a "skin" is but it could be somewhat handy, the big names would be dbrand and slickwraps.
Click to expand...
Click to collapse
I think the dbrand seem a bit thicker. It saved my nexus 5 from a few scratches on a pavement drop. The slick will too, but perhaps not as much. Anything more than a scratch though, it's not rally going to do anything.
rootSU said:
I think the dbrand seem a bit thicker. It saved my nexus 5 from a few scratches on a pavement drop. The slick will too, but perhaps not as much. Anything more than a scratch though, it's not rally going to do anything.
Click to expand...
Click to collapse
My first dbrand was for the nexus 4. The nexus 4 had a glass back and I was annoyed during winter time, the back of the phone was super cold because of the glass.
I purchased a skin for the n6 for the back to prevent fingerprints. I think a awesome setup would be. Tempered glass, dbrand, slickwraps side skins.
Wish dbrand offered skins for the sides. But yeah dbrand should protect minor accidents like scratches
Sent from my Nexus 6 using Tapatalk
zephiK said:
My first dbrand was for the nexus 4. The nexus 4 had a glass back and I was annoyed during winter time, the back of the phone was super cold because of the glass.
I purchased a skin for the n6 for the back to prevent fingerprints. I think a awesome setup would be. Tempered glass, dbrand, slickwraps side skins.
Wish dbrand offered skins for the sides. But yeah dbrand should protect minor accidents like scratches
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I haven't got a glass yet and im holding off as I like the feel of the 6 naked. I've ordered a Ringke slim in Crystal which should arrive today or tomorrow... and a carbon fibre back and sides from slickwraps. Not sure if I will like the case but it was cheap so its no loss...
I use a Unicorn Beetle case on my phone. A little bit big but you'll get used to it soon. I've dropped it about 4 times and it should have cracked about 3 times. But not a crack
Well the Slim case arrived. Actually the videos and photos dont actually do justice to how slim it is. Its really slim. BUT, it does creak a little and it scratches even using a lint cloth, which of course you need to use because if you get anything stuck between the phone and the case, you can see it a mile off.
rootSU said:
Well the Slim case arrived. Actually the videos and photos dont actually do justice to how slim it is. Its really slim. BUT, it does creak a little and it scratches even using a lint cloth, which of course you need to use because if you get anything stuck between the phone and the case, you can see it a mile off.
Click to expand...
Click to collapse
Yep same here when I got mines. The top left creaked a bit. It's a pain in order to remove the case. I personally don't really like their slim case, the Galaxy Nexus slim case was perfect though. I go for the Ringke fusion.
Sent from my Nexus 6 using Tapatalk
zephiK said:
Yep same here when I got mines. The top left creaked a bit. It's a pain in order to remove the case. I personally don't really like their slim case, the Galaxy Nexus slim case was perfect though. I go for the Ringke fusion.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I dont like any cases at all. I'm a naturist when it comes to phones, but it was £6 from Amazon so I thought "why not". It is hard to remove, but I was prepared for that after watching the video reviews in the accessories forum.
I can't say I'll keep it on, but I'll see how long I can last
rootSU said:
I dont like any cases at all. I'm a naturist when it comes to phones, but it was £6 from Amazon so I thought "why not". It is hard to remove, but I was prepared for that after watching the video reviews in the accessories forum.
I can't say I'll keep it on, but I'll see how long I can last
Click to expand...
Click to collapse
I felt like I was going to break the phone with how tough it was. I eventually got it off but made my thumb get injured slightly. Not fun. I do love the fusion though. So beautiful
Sent from my Nexus 6 using Tapatalk
zephiK said:
I felt like I was going to break the phone with how tough it was. I eventually got it off but made my thumb get injured slightly. Not fun. I do love the fusion though. So beautiful
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Yeah very nice. I'd prefer clear all round to show off skin sides. ..and a bit big for me.
Ive never been one for cases but I did runrun an urban armor gear on my s3 for a few weeks. Was massive and looked like a portable toilet haha
Thank you to all for your clarification and suggestions in this thread; I hope that others with similar questions will find this a good source as I have for a quick, simple set of answers.
At this stage I'll likely end up with a temp glass cover for one phone and a flip case for the other (partner's phone, as they've recently decided they want).
rootSU said:
Yeah very nice. I'd prefer clear all round to show off skin sides. ..and a bit big for me.
Ive never been one for cases but I did runrun an urban armor gear on my s3 for a few weeks. Was massive and looked like a portable toilet haha
Click to expand...
Click to collapse
I would have done that too, I have a Crystal but the carbon fiber looked weird with the blue sides so I had a smoke black to hide the trim piece.
Hi folk,
With another OnePlus product comes another OnePlus attempt at making a tempered glass screen protector which works for it. Will it be this time that is the magic attempt?
If you dont want to or can't watch the video here are my thoughts:
Yes, they seem to have finally made a tempered glass which fits perfectly on the screen without much cut off. I say much as I think there is still a tiny cut off, but it's nowhere near as noticeable as it was on the 3/3t or 5. If you want to take a look, its on the video at around the 4:04 mark.
The quality is excellent, you can barely feel or see that it's there. There are no sharp edges as the screen tapers off at the edge. It's a full glue screen protector so there is no dot matrix or rainbox effects. You do however have to be fairly careful whilst applying it and taking it off its bed as it feels like it could snap fairly easy if you rush it.
Pros:
Good fit
Feels premium
No dot matrix
No rainbox effect
Cons:
Pricey
Could break easily whilst installing
On the pricey mark, if OP have managed to make this perfect this time, I'd expect third party manufacturers to release a similar product soon at a cheaper price. So if you want to wait and do that I wouldn't blame you.
Let me know if you have any questions.
Jono
Thanks for that, good to know as I ordered one with my 5T.
Hopefully there is a decent bunch of 3rd party ones too.
A spigen tempered glass is my all time favorite screen guard.
niijonodhg said:
Pros:
Good fit
Feels premium
No dot matrix
No rainbox effect
Cons:
Pricey
Could break easily whilst installing
On the pricey mark, if OP have managed to make this perfect this time, I'd expect third party manufacturers to release a similar product soon at a cheaper price. So if you want to wait and do that I wouldn't blame you.
Click to expand...
Click to collapse
Thanks for this. I wanted to know how much it will cut of the screen but its much lesser than earlier.
But i need to disagree something with you. You (and many others) said it was issue etc. on OP3/3T/5 what last TGSP cutted off screen. Well it wasnt really issue or fault on Oneplus side. They needed to choose to have adhesives only on sides and no cut-off or adhesives on fully but had to cut-off. That was because of OP3/3T/5 front glass design where glass started ro bend (2.5D) earlier than usual. Thats why black borders was bigger as otherwise you would get ugly halo's and nobody likes that.
About price. Dont know where you leave but here in Finland 20€ price is nearly cheapest TGSP avaible here. Usually TGSP's here costs around 25-50€ depending of phone model so 20€ is more than just normal price for us. So okay maybe its little pricey compared ro your country but on many others it isnt.
This is my first OP device so I know nothing about past issues, but this is by far the best fitting, best sealing TGSP I have ever installed. Typically with screen protectors the edges do not want to seal/stick but the squeegee made quick work of getting all the bubbles out. There are a few pieces of inevitable lint but not one single bubble.
It does cut a tiny bit of the screen off which gives a weird depth to the screens appearance so for that I give it 9/10. If it was totally clear or just had the black at the top and bottom it would be 10/10 for sure.
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
DeathStroke said:
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
I'm using the original one and is perfect with the original case/Bumper.
Mine is not so perfect and the screen is slightly cover on the edge. is not a huge problem, but is noticeble if you see the phone from a side.
in any case is far better than the original plastic protector and perfect with a case.
DeathStroke said:
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
It works with all the official cases you can get from OnePlus and I see no reason to why it wouldn't work with a standard TPU. Will let you know more when I get some cases.
niijonodhg said:
It works with all the official cases you can get from OnePlus and I see no reason to why it wouldn't work with a standard TPU. Will let you know more when I get some cases.
Click to expand...
Click to collapse
Because of edge alignment, it doesn't work on the OP5, so I'll order only if it's going to work with tpu case i got.
Sent from my ONEPLUS A5010 using Tapatalk
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
DeathStroke said:
Because of edge alignment, it doesn't work on the OP5, so I'll order only if it's going to work with tpu case i got.
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
Which case do you have?
lyall29 said:
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
Click to expand...
Click to collapse
Honestly, I haven't noticed.
niijonodhg said:
Which case do you have?
Honestly, I haven't noticed.
Click to expand...
Click to collapse
The one that came in the box. I want to order a 3d tempered glass and a premium case so that they can work together. Looking yet for a compatible combo.
Sent from my ONEPLUS A5010 using Tapatalk
niijonodhg said:
Which case do you have?
Honestly, I haven't noticed.
Click to expand...
Click to collapse
I just removed the protector to see how the screen looks naked. The "grainy-ness" is gone. I also noticed a potential problem with the protector. The adhesive doesn't go all the way to the top or bottom of the protector, so when I removed it I found a lot of dust stuck to the top and bottom bezel of the phone. This could cause scratches. Even though the scratches would not be on the display, I don't want scratches anywhere on the glass. If I keep this phone I'll try an IQshield.
With the bubbles settling behind, a lot of little dust has been captured.
I also notice grainy-ness. I'm likely going to ditch it and just go naked...
I just got my for 10€. And yes, it still crops a bit from both sides but not like OP3/3T/5. And yes, there is grainy-ness as stated above. You cant notice on black background but on white yes.
I bought the '5T full scratch protection' bundle with my phone. I have an unopened "3D Tempered Glass Screen Protector" and an opened (but unused) "Sandstone Protective Case". My plan was going to be to use the case until Spigen comes out with a 5T case, but I just decided to rock the case that came with my 5T instead.
lyall29 said:
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
Click to expand...
Click to collapse
To be frank I wouldn't have noticed the grainy screen till I read your comment. But now that I've read it.... The screen protector does induce the grainy effect. It's a perfect fit imho, though it definitely does give out that grainy effect. I'm guessing I'll stop noticing it in a couple of days time.
I had an extra IQshield (wet apply) protector for a Pixel 2 XL. I cut a little off the top and it fit fine. I must say, the IQshield is very clear, no grainy screen for me.
I have to put my 2 cents in on this. The official tempered glass is pretty great. I had no issue installing, it stayed in place, zero bubble at all, and feels great. using it with the official sandstone case.