Database Develop

update error 262

Hello Ansar,
I am using the following ROM
RUU_Schubert_hTC_Asia_WWE_1.23.707.01_Radio_5.51.09.06a_22.30.50.09_Signed_SCHUBERT_RELEASE
and i am always getting the update error 262 when updating rom.
Please help me with the issue.

nitroxn said:
Hello Ansar,
I am using the following ROM
RUU_Schubert_hTC_Asia_WWE_1.23.707.01_Radio_5.51.09.06a_22.30.50.09_Signed_SCHUBERT_RELEASE
and i am always getting the update error 262 when updating rom.
Please help me with the issue.
Click to expand...
Click to collapse
Hi,
I assume that you have the right ROM for your phone. Before you start the update, you must enter the Bootloader mode. Turn it off, press the volume down and plug the micro USB.

PanNet said:
Hi,
I assume that you have the right ROM for your phone. Before you start the update, you must enter the Bootloader mode. Turn it off, press the volume down and plug the micro USB.
Click to expand...
Click to collapse
My phone is stuck in the bootloader mode and always gives the 262 error when i try to update the rom. i tried updating the microsd card but no help there as well.

nitroxn said:
My phone is stuck in the bootloader mode and always gives the 262 error when i try to update the rom. i tried updating the microsd card but no help there as well.
Click to expand...
Click to collapse
Hi,
When you in Bootlooader mode and after connected USB cable at the bottom you have description Serial or USB? If you have drivers installed properly you shold have USB and after that you can start install process.

My Phone shows USB connection mode and the drivers are all installed. Still cannot get what the problem is.

[NEED HELP] Bricked Galaxy Mini S5570

Device: Galaxy Mini S5570
Bricked while trying to flash custom recovery (not sure which one, I wasn't the one trying, but I'm guessing it was not made for this device and that's what produced the problem.)
The phone goes into download mode, but is not recognized by Odin, and windows says "Error code 43" meaning it does not recognize the device either.
In Device manager there's an "Unknown device", the Hardware ID of which is "USB\UNKNOWN" (Not much help, huh?)
The phone won't go into recovery mode, it stays blank if I try volume up + Home + Power
and if I try to boot it up it hangs at the Samsung splash screen and stays there.
I've double checked my drivers, cables, and tried another laptop.
Laptop running Windows 7 x64 bit
anyone got any other ways to help? I've tried everything I could find on the internet with no luck yet.
I'm very optimistic about it since it goes into download mode, I just need a way to make windows recognize the device or boot into recovery.
Any help or other ideas are appreciated, and thanks in advance

Anyone ?

Bugz! said:
Anyone ?
Click to expand...
Click to collapse
Recovery combination is home+power.
Sent from my GT-S5570 using XDA Free mobile app

Venkatesh said:
Recovery combination is home+power.
Click to expand...
Click to collapse
Yeah, I tried that, and it didn't work.
I no longer have access to the device to try to solve this, the owner decided to send it to a service center.
Thanks anyways Cheers!

my lenovo device is bootloop, and can not get into recovery mode and not detected

my lenovo device is bootloop, and can not get into recovery mode and not detected on pc
please help me get my device working again
:angel:

Jspradipta said:
my lenovo device is bootloop, and can not get into recovery mode and not detected on pc
please help me get my device working again
:angel:
Click to expand...
Click to collapse
Flash stock ROM using spft. Thread in roms section.

even on the spft not detecting already installed drivers tried to format still not benefit what to do now ?

Maze Alpha locked after TWRP installation. Does not access the download mode

Hello, I have an Alpha Maze and to perform the Root on my handset I started by installing a Costin recovery TWRP. Now the device starts directly in recovery mode but does not activate the touch so I can not do anything.
The biggest problem is that the phone no longer accesses the backup mode going straight to the opening screen of the TWRP.
Can you help me?

TriFagundes said:
Hello, I have an Alpha Maze and to perform the Root on my handset I started by installing a Costin recovery TWRP. Now the device starts directly in recovery mode but does not activate the touch so I can not do anything.
The biggest problem is that the phone no longer accesses the backup mode going straight to the opening screen of the TWRP.
Can you help me?
Click to expand...
Click to collapse
Not sure on how to fix that. Maybe an idea, do you have a OTG cable there? If you can attach a computer mouse to it then maybe you are a step further.
If someone else has another idea on how to fix that issue.
And please keep us updated on what happens!

lukesan said:
Not sure on how to fix that. Maybe an idea, do you have a OTG cable there? If you can attach a computer mouse to it then maybe you are a step further.
If someone else has another idea on how to fix that issue.
And please keep us updated on what happens!
Click to expand...
Click to collapse
Okay, I'll arrange a cable OTG then post the result. Soon I send more details about the problem and maybe some photos.

No rom in my phone

hi guys
i have format my phone and now its empty there are no rom and i tried to install twerp but the computer didn't recognise my phone driver. i have only mi recovery and i can't install any rom from it
can someone help me please i'am stuck with empty useless phone

please help me

zaki830 said:
please help me
Click to expand...
Click to collapse
First check your usb cable and port. Then
Try to flash miui by fastboot. If you don't know search google.
If it doesn't help then try EDL mode. If it works then tell me.