backlight light through glass frame. tips? advice?
does anyone know of any glue material or paint or something I could use in the corners of the glass frame to stop the backlight light from coming through?
I might be able to use a syringe or something if I had the right material to stop the light
does anyone have any advice for fixing backlight through frame on the htc m7
maybe better glue - something black color
i dont know
i can probably get some one to put another glass on it but I would like to know what type of adhesive will block the backlight from coming out the frame again
Related
I just got a tilt about a week ago and ive noticed that in the middle of the screen there seems to be a purple greenish tint when put against incandescent light. The size of said glint varies in size but i'm unable to see what changes the size. Not sure if its heat or pressure or something. The touch screen works perfectly its just really annoying to always see such an annoying glint.
An interesting discovery is that when i press all four corners of the screen it disappears and when i press in the middle of the little square it seems to spread out. I feel like theres some kind of material or something in the touch screen that is causing this due to pressure. I keep it in a hard case in my pocket so the screen isnt pressed on inadvertently.
I've searched the forum for any answers but i havent seen anything about it. Any response or help would be greatly appreciated. I'll try to get a picture of it up asap but i left my camera at a friends house and dont know when im getting it back...thanks in advanced
~sayazs
Do you see the same "annoying glint" under neon light (not day / sunlight)?
Lots of NOKIA and SONY ERICSSON phones for example get this screen recolorization under direct sunlight - this has nothing to do with the screen being defective but with the plastic above the screen which breaks the light and shows you this colored spots. If you can't see the same spot under direct neon light then this might be the cause.
It is normal that you get color changes while pressing the screen in. First of, you press / bent the protecting plastic and the liquid within the screen which causes the incoming light to break in a different angle, therefore the color changes. (BTW: you shouldn't do that too often, it can cause permanent stains on your screen!).
There sure is the possibility that your screen gets pressure from underneath due bad assembling! If you're still under warranty, try to get a replacement.
yeah you cant see it in day light. but i feel as though there is constant pressure on the screen between the plastic and liquid since the spot is always there and doesnt really go away (unless of course in daylight).
well im thinking im going to go back for a replacement. thanks for the quick answer!
I noticed that I seem to be getting a lot of scratches on the front of my phone specifically on the black glossy parts right above and below the screen. Anyone have any ideas on how to get these off?
Started noticing the ambient notification (when you pickup the phone the screen supposedly emit the black/white display) is gone, right after I'd installed one of those eBay tempered glass screen protector.
The cutout of the glass, I do not think it obstruct either the camera lens or anything else.
Anyone have this problem? If so, how to remedy this issue (without having me take off the protector...lol). Thx.
this thread might be helpful to you:
http://forum.xda-developers.com/nexus-6/accessories/tempered-glass-screen-protectors-t2922645
You will need a different screen protector - one that does not cover the sensor.
Before you do that, you can try the suggestion at this link to see if it helps
xo96 said:
Started noticing the ambient notification (when you pickup the phone the screen supposedly emit the black/white display) is gone, right after I'd installed one of those eBay tempered glass screen protector.
The cutout of the glass, I do not think it obstruct either the camera lens or anything else.
Anyone have this problem? If so, how to remedy this issue (without having me take off the protector...lol). Thx.
Click to expand...
Click to collapse
I have the same problem right after installing the tempered glass
I'm visiting my parents and my mother's Z3 Compact has issue that screen goes black when call is made. It turned out proximity sensor reports always active on state. It seems to work when I push the top-left part of screen but I have no experience with fixing HW issues so I don't want to open the phone.
Instead I would be happy if it was possible to disable the proximity sensor altogether for now. Phone is bought as used and it seems to have bootloader unlocked so it wouldn't probably be a big deal to root it if that would help with fixing the issue. Any suggestions what to do? I tried some programs like Proximity Screen Off Lite which some people mentioned had done it for them but it seemed not to help me with this issue.
Hi. Proximity issue is result of peeling off screen from frame. Just take some epoxy glue and apply a little to the gab in the corner between frame and screen. Just watch out to not apply glue on proximity sensor, but only on the frame. After that take some clip to press it and left it for 24 hours to make sure glue get dry. Thats all. Of course You can also take apart whole phone and change whole glue adhesive under the screen but this one is quite harder than just apply some glue in gap between screen and frame.
Just wondering if anyone here has had any luck replacing the front panel on the phone?
My phone took a drop yesterday and smashed the top corner, At first there was distortion on the screen and colour placement was wrong.
But after lifting the crack / broken glass part, it appears to have corrected itself.
This making me think its just the front Panel that is damaged.
replacing the screen is £150-£200 here in the UK
But replacing just the front panel is about £20
I know the phone is pretty much glued together, so has anyone had any experience or know of anyone who has successfully removed and replaced the front panel?