I can't boot my phone, it says Custom binary blocked by FRP
I can't flash twrp, and whenever I try to flash a stock md5, odin fails
What do I do?
Update- I tried to flash a stock rom from http://forum.xda-developers.com/not...ware-firmware-kernel-modem-recovery-t2902574/
Results were
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Firs of all. How did you brick your phone?
Sent from my SM-N910T using Tapatalk
Did you by chance turned on the Samsung Activation Lock?.This happened to me the first time i tried to install custom rom, i thought the phone had bricked but I was able to get into recovery mode and restart the OS. Try booting into recovery mode and choose restart system If not you will need to flash a stock rom but it needs to be the same version you had.
nano303 said:
Firs of all. How did you brick your phone?
Sent from my SM-N910T using Tapatalk
Click to expand...
Click to collapse
I booted it into recovery and got the Custom Binary Blocked message when I try to boot
glm0025 said:
Did you by chance turned on the Samsung Activation Lock?.This happened to me the first time i tried to install custom rom, i thought the phone had bricked but I was able to get into recovery mode and restart the OS. Try booting into recovery mode and choose restart system If not you will need to flash a stock rom but it needs to be the same version you had.
Click to expand...
Click to collapse
I would, but I can't boot into recovery mode
Fixed it! I flashed about a dozen different files on Odin, finally got a 5.1.1 tar.md5, that's working
aaronfrickinaustin said:
Fixed it! I flashed about a dozen different files on Odin, finally got a 5.1.1 tar.md5, that's working
Click to expand...
Click to collapse
Which one worked?? Please tell me! Stuck in the same situation
This error is due to the Samsung Activation Lock being on before flashing a custom rom, be sure to turn this off in the future before installing another rom. If by chance you forget and get the error just try flashing back the stock version of the rom you currently have and it should come up.
Related
Hi all !
Since a few days i have an Samsung Galaxy S4 Active (i9295), in the past i always rooted my Samsung Phones and flashed them with a custom ROM.
I boot up phone in recovery/download mode, restarting the phone while holding volume down.
The android figure pops up and everything looks fine, so i connect it to the computer and start Odin 3.07 (also tried other versions)
Odin can communicate with the device and shows [COM4], i press AP/PDA depening on Odin version and select the custom recovery file. I get back the following in the console.
Code:
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!
Odin tells me, RESTART on the top and indeed the device is restarting. It boots normally without a problem or error. Odin still shows RESTART on the computer screen.
Now im like, did it worked ? Lets boot to recovery !
No, it didnt work... No custom recovery.. BUT ! Odin now shows Passed and give me the following output in the console.
Code:
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I tried TWERP recovery, CWM Recovery and CWM with swipe.
Also tried to use a other computer, this didnt make any diffrence.
I hope for some tips
Oh, im stock now !
BrianVogel said:
Hi all !
Since a few days i have an Samsung Galaxy S4 Active (i9295), in the past i always rooted my Samsung Phones and flashed them with a custom ROM.
I boot up phone in recovery/download mode, restarting the phone while holding volume down.
The android figure pops up and everything looks fine, so i connect it to the computer and start Odin 3.07 (also tried other versions)
Odin can communicate with the device and shows [COM4], i press AP/PDA depening on Odin version and select the custom recovery file. I get back the following in the console.
Code:
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!
Odin tells me, RESTART on the top and indeed the device is restarting. It boots normally without a problem or error. Odin still shows RESTART on the computer screen.
Now im like, did it worked ? Lets boot to recovery !
No, it didnt work... No custom recovery.. BUT ! Odin now shows Passed and give me the following output in the console.
Code:
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I tried TWERP recovery, CWM Recovery and CWM with swipe.
Also tried to use a other computer, this didnt make any diffrence.
I hope for some tips
Oh, im stock now !
Click to expand...
Click to collapse
I had this exact same issue when I tried to install custom recovery and it took me longer than it should have to solve. I rooted the phone first and then I was able to flash custom recovery. I have no idea why it worked, but it did. Try that and let me know.
Thanks for your quick reply
I always install SuperUser with CWM, so how can i do this without CWM ?
BrianVogel said:
Thanks for your quick reply
I always install SuperUser with CWM, so how can i do this without CWM ?
Click to expand...
Click to collapse
FIXED !
No root needed
When u flash with odin and it does a reboot, DIRECTLY input volume UP.
First reboot needs to enter CWM to let it work, if you skip this, it will be removed and default again.
Phone is flashed now without any problems
@BrianVogel
It is best to completely power off, wait, enter download mode.
If needed - modem.bin and NON-HLOS.bin can be then be Odin flashed without repeating the flash twice. Many shady guides tell you to flash modems twice to "make it stick". The reason it won't stick is download mode entered from restart meny.
Never run Odin on same PC where Kies is installed. Odin and Kies will fight to gain control of USB connected device.
Some borked Win7 need to run a Fix from M$ KB to properly detect Samsung phone as hardware even after installation of USB driver. Google to find the Fix, download and run.
Always connect directly to PC USB - never USB hub.
I had same problem and solve with these steps:
- In ODIN uncheck "Auto-reboot"
- flash using AP/PDA as you did, but your phone remains on
- disconnect cable
- now press Home + Volume Up + Power and hold while phone turn off and turn on again into recovery
- you should see new recowery and follow on screen steps
i have installed twrp and inside twrp installed the supersu now when i reboot device it is stuck at the samsung galaxy s5 screen HELP!
dexter_17 said:
i have installed twrp and inside twrp installed the supersu now when i reboot device it is stuck at the samsung galaxy s5 screen HELP!
Click to expand...
Click to collapse
Take the battery for 30sec out and reboot again
i have tried that still no luck? have i soft bricked my device i can still boot into twrp
please help
Try to Reflash boot loader in Odin
Otherwise go into download mode and reflash your rom using Odin.
Then twrp
Then SuperSU (not the one in twrp)
how do i reflash bootloader,
all i did was:
boot device into download mode and use odin to install twrp
once inside twrp i clicked supersu install
now the phone remains at SAMSUNG S5 logo
device information:
SSN = g900fgsmh
SM-G900F
6.0.1
anyone? please
hello?
Download a Boot loader: https://www.androidfilehost.com/?w=files&flid=18030
Open Odin select AP and browse for the Bootloader and click install/flash.
i cannot find my one SSN = g900fgsmh any advice>?
dexter_17 said:
i cannot find my one SSN = g900fgsmh any advice>?
Click to expand...
Click to collapse
Download for G900f it should work
SSN = g900fgsmh i cannot find my device in the list
just tried but it still is stuck at samsung galaxy s5
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> tz.mbn
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
this all happened after install twrp can i recover for this nightmare
dexter_17 said:
this all happened after install twrp can i recover for this nightmare
Click to expand...
Click to collapse
Which TWRP version and SuperSU version do you have tried to installed?
And on which firmware you were before?
Twrp version is twrp-3.0.2-2-klte.img (1).tar
supersu version is BETA-SuperSU-v2.44
im not sure what firmware version but android version i had before but i had 6.0.1
dexter_17 said:
Twrp version is twrp-3.0.2-2-klte.img (1).tar
supersu version is BETA-SuperSU-v2.44
im not sure what firmware version but android version i had before but i had 6.0.1
Click to expand...
Click to collapse
Your SuperSU is very old.
Install this TWRP version again : https://dl.twrp.me/klte/twrp-3.0.2-2-klte.img.html
And latest SuperSU : http://download.chainfire.eu/1003/SuperSU/SR1-SuperSU-v2.78-SR1-20160915123031.zip
are you here please
it must of started the bootloop after installing twrp, i have tried all the other versions also but still doesnt work.....
Hi All This is my first post here .
yesterday i had a problem installing Xposed framework it said that it need a custom rom to be istalled
so i downloaded the TWRP app chosed my recovery version and run it, it was flashed succesfully but when i tried to boot to it i got this message in blue screen "System Software not authorized by AT&T ... "
I was able to boot the system normally so i tried to recovere the original stock recovery i downloaded an app called Flashify downloaded a stock recovery ( im not sure that it was the original ) and flash it , after rebooting i was shocked by the blue screen on the recovery and also on the system so i can't boot to the system now !
I tried to flash another TWRP using odin 3.10.6 and 3.12.3 but in the two cases it fails with this error :
Code:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Im totally lost now i have a lot of personal data inside ( 6gb of pics + 200 mb of call records + phone numbers )
I bought the phone from a third party , and we dont have any AT&T agency here
Information about the phone :
- I think that the phone was rooted because the root checker said that but when i install the su it said that i need a binary update and every time i do that it reboot without updating , when i tried from the recovery it said,signature failed or something like that .
- I had android 5.1 i think it was a custom rom because when the s6 logo appear I see under Custom with an open lock
When i go to the download mode they write
ODIN MODE //it was there even before i flash it
PRODUCT NAME : SM-G920V
CURRENT BINARY : CUSTOM // it was OFFICIAL before flashing
SYSTEM STATUS : CUSTOM
REACTIVATION LOCK : OFF
SECURE DOWNLOAD : ENABLED
RP SWREV : B:4 K:3 S:3
on the back of the phone the product name is : SM-G920F
on the previous rom it was : SM-G920F
Please any solution to back up my DATA then flash a new rom updated with a custom recovery Or even recover the original stock recovery only ( i was not using an AT&T sim card )
Hi All This is my first post here .
yesterday i had a problem installing Xposed framework it said that it need a custom rom to be istalled
so i downloaded the TWRP app chosed my recovery version and run it, it was flashed succesfully but when i tried to boot to it i got this message in blue screen "System Software not authorized by AT&T ... "
I was able to boot the system normally so i tried to recovere the original stock recovery i downloaded an app called Flashify downloaded a stock recovery ( im not sure that it was the original ) and flash it , after rebooting i was shocked by the blue screen on the recovery and also on the system so i can't boot to the system now !
I tried to flash another TWRP using odin 3.10.6 , 3.11 and 3.12.3 but in the two cases it fails with this error :
Code:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Im totally lost now i have a lot of personal data inside ( 6gb of pics + 200 mb of call records + phone numbers )
I bought the phone from a third party , and we dont have any AT&T agency here
Information about the phone :
- I think that the phone was rooted because the root checker said that but when i install the su it said that i need a binary update and every time i do that it reboot without updating , when i tried from the recovery it said,signature failed or something like that .
- I had android 5.1 i think it was a custom rom because when the s6 logo appear I see under Custom with an open lock
When i go to the download mode they write
ODIN MODE //it was there even before i flash it
PRODUCT NAME : SM-G920V
CURRENT BINARY : CUSTOM // it was OFFICIAL before flashing
SYSTEM STATUS : CUSTOM
REACTIVATION LOCK : OFF
SECURE DOWNLOAD : ENABLED
RP SWREV : B:4 K:3 S:3
on the back of the phone the product name is : SM-G920F
on the previous rom it was : SM-G920F
Please any solution to back up my DATA then flash a new rom updated with a custom recovery Or even recover the original stock recovery only ( i was not using an AT&T sim card )
(whitch version i should use to flash 920F or V or A ? )
Hello
my sister somehow managed to soft brick the phone.
It started randomly rebooting, then she ask for my help, i started android update (phone is 2yrs old and was never updated). I thought this would solve the problem, my plan B was factory reset.
But just when phone was installing the update it rebooted and never booted again.
I did factory reset (factory mode), didnt help.
Downloaded fresh latest firmware from sammobile, flashed with Odin and still doesnt work. Odin says that everything was OK.
I may or may not download wrong firmware tho, on the invoice for the phone it says SM-G780/DS but i can not find /DS version anywhere?(i suppose this is irrelevant?)
Any help here? Should i root my phone and try flash firmware with TWRP?
***EDIT***
phone rebooted while i was doing system update from Android 11 to Android 12. My guess is that this somehow bricked the phone.
Earlier i downloaded Android 12, Odin successfully installed it but phone didnt work.
Now I tried download Android 12 and i get this error
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 9673 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> up_param.bin
<ID:0/004> ldfw.img
<ID:0/004> FAIL!
I am really lost here.
I searched xda forums/google and if I am not wrong i should somehow unloc OEM before flashing any OS on the phone?.
OEM was never unlocked in develop. options. Is there a way to unlock it with ADB or somehow ?
Tried to flash TWRP but i got error on the phone saying OEM LOCKED
How to fix the missing OEM Unlock button on the Samsung Galaxy S9/S8/Note 8
try to follow this guide so you can see unlocked bootloader if its hidden.
then you can flash without errors hope it helps
you can get new phone if you have warranty
dehumless said:
I searched xda forums/google and if I am not wrong i should somehow unloc OEM before flashing any OS on the phone?.
Click to expand...
Click to collapse
This is incorrect. It's not needed if you're flashing stock fw.
dehumless said:
SM-G780/DS
Click to expand...
Click to collapse
It looks like it's missing a letter before the /DS. What does download mode say your model is?