xperia z1 no signal problem (HELP!!!!) - Xperia Z1 Q&A, Help & Troubleshooting

my xperia z1 suddenly have no signal.
i already tried my sim to other phone, it works perfecting and have a full bar of signal.
i also tried other sim network to my z1, but it also indicates no signal.
i tried to repair it using pc companion, but the problem is still the same.
i also tried hard/factory reset my z1, still same problem.
i can access the sim option and function, but still no signal.
i also try using simcard reader app, it can read my sim card and i can view my simcard information.
so i think my phone simcard reader is functional.
I need your help to solve my problem on my only phone. thank you:crying::crying::crying:

Did you drop the phone or hurt it physically? Sounds like a hardware issue to me.

xasbo said:
Did you drop the phone or hurt it physically? Sounds like a hardware issue to me.
Click to expand...
Click to collapse
no sir.. no physical damage at all..
do you think flashing it can fix the problem?
thanks sir

@lonesome10
I tampered once with the radios and selected USA bands, and had no signal but clean reflashing a rom brought it back to life.
You said though, you already tried repairing it through PC Companion so I don't know if you can solve the problem.
If you have flashtool, try flashing an ftf from here and see if that helps, otherwise I can't think of anything else.

@yngwie_m
thanks for your reply.. I have no idea regarding flashing of my xperia.
can you send me a tutorial on how flash xperia z1. I want a stock firmware flash.
again many thanks..

lonesome10 said:
@yngwie_m
thanks for your reply.. I have no idea regarding flashing of my xperia.
can you send me a tutorial on how flash xperia z1. I want a stock firmware flash.
again many thanks..
Click to expand...
Click to collapse
@lonesome10
I am now on my Xperia. When I get back home to my laptop I will try to gather links and make a fast tutorial. Or if anyone else can do it that would be nice too.
Will be right back.
No need for thanks. I 've been to where you are now it was annoying.

@yngwie_m
I already flash it using a ftf from xperifirm. no changes, still no signal from my network.
i am still hoping that i can solve this problem...

lonesome10 said:
@yngwie_m
I already flash it using a ftf from xperifirm. no changes, still no signal from my network.
i am still hoping that i can solve this problem...
Click to expand...
Click to collapse
In that case I am out of ideas too, and close to thinking it is a hardware issue.
Because in my case flashing a clean ftf brought it back.

yngwie_m said:
In that case I am out of ideas too, and close to thinking it is a hardware issue.
Because in my case flashing a clean ftf brought it back.
Click to expand...
Click to collapse
i want to downgrade my phone of software.. is that possible? sorry i am new on flashing an android phone..

@lonesome10
Yes it is possible. You wrote you managed to flash an ftf from xperifirm, which means you downloaded the files, and used to flashtool to create an ftf. Correct?
Now go to xperia z1 general section and in there, there is a thread containing stock ftfs.
Download one (preferably a kitkat 14.4.a.0.108), and flat it through flashtool again. Do not check anything in flashtool, that means wipe everything and do a clean flash.
See how that goes.

@yngwie_m,
Yes I manage to flash it by downloading a firmware from xperifirm then create a FTF using flashtool and I flash my phone.
If I download a firmware (preferably a kitkat 14.4.a.0.108), do I have to use flashtool to create a FTF file then flash my phone? or I don't have to create a FTF file and directly flash my phone with the firmware I downloaded using flashtool. I am from the Philippines, is there a firmware that is made for PH user? What is generic/unbranded or branded FW? what is rom and kernel?
Sorry again for the inconvenience, I don't have experience with flashing using different firmware.. again thank you for your effort to solve my phone problem. I appreciate it so much!!!

@lonesome10
On the 3rd page of Xperia Z1 General subforum, there is a thread called "[FTF] C6902 & C6903 & C6906 & C6943 FTF Mega Collection".
On the first post it has all stock uprooted ftfs.
So find which variant you have (C6902, C6903, C6906, etc) and download the corresponding ftf. Any Generic or Global ftf will do.
You will be downloading an .ftf file so no need to create it. Just flash it through flashtool.
Don't worry about roms and kernels. You have to make the phone work again for starters.
Branded is an ftf that contains stuff from a brand, like Vodafone or o2 or whatever.
Unbranded is a clean ftf as given from Sony to carriers.
So to sum up, for starters go to that thread and get an ftf to flash through flashtool.
To check your variant, see the phone package or in dialer press *#*#7378423#*#* and in Service Menu go to Service info -> Model info to see which one you have and download appropriate ftf.

Related

[SOLVED] xperia Tx - No 3G coverage after Upgrading to JB

HIIii Guys
i upgraded my Tx to JB yesterday, everythng is ok .. but no 3G coverage at all
it's telling me that no sim is inserted ..
Mobile network stat : disconnected
network type : UNKNOWN
i rooted th device ..
any ideas ??
what did you do?
How did you update it?
How did you root it?
gregbradley said:
what did you do?
How did you update it?
How did you root it?
Click to expand...
Click to collapse
On ICS i was using 3G normally, then i upgraded to JB via Sony PC companion
i lost the 3G signal
i rooted the device using (Bin4ry_v28 tool), it's fine, no rooting problems at all.
what do u think ?
Dodger86 said:
On ICS i was using 3G normally, then i upgraded to JB via Sony PC companion
i lost the 3G signal
i rooted the device using (Bin4ry_v28 tool), it's fine, no rooting problems at all.
what do u think ?
Click to expand...
Click to collapse
did you root before or after the upgrade?
gregbradley said:
did you root before or after the upgrade?
Click to expand...
Click to collapse
ICS 4.0.4 was not rootable on Tx, i had 2 choices : downgrade OR upgrade
i rooted after upgrading ..
OK
Find a ftf file for your phone (Probably one in the all in one thread) and flash it using flashtool. Just make sure your exclude everything except baseband. That will restore your phone radio settings
gregbradley said:
OK
Find a ftf file for your phone (Probably one in the all in one thread) and flash it using flashtool. Just make sure your exclude everything except baseband. That will restore your phone radio settings
Click to expand...
Click to collapse
i'm totally new to android and xperia .. i've just upgraded from the ugly IOS :laugh:
so i hav no idea about flashing and ftf and such things, i barely rooted my phone
i was reading ur thread in (all in one) section .. but still afraid of doing it wrong ..
so let me check it with u ..
1- i should look for FTF file for xperia Tx JB
2- i should download a flashtool
3- i should flash everythng except baseband .. and this will restore my 3G coverage
is that correct ?
Dodger86 said:
i'm totally new to android and xperia .. i've just upgraded from the ugly IOS :laugh:
so i hav no idea about flashing and ftf and such things, i barely rooted my phone
i was reading ur thread in (all in one) section .. but still afraid of doing it wrong ..
so let me check it with u ..
1- i should look for FTF file for xperia Tx JB
2- i should download a flashtool
3- i should flash everythng except baseband .. and this will restore my 3G coverage
is that correct ?
Click to expand...
Click to collapse
yes. Find flashtool in the first post in the dev section
Flash the ftf using flasdhtool. You will be given options to exclude certain bit of the file. Tick everything except baseband so that only the radio bit of the file is flashed
And welcome back from the dark side...iOS is like swearing here...
gregbradley said:
yes. Find flashtool in the first post in the dev section
Flash the ftf using flasdhtool. You will be given options to exclude certain bit of the file. Tick everything except baseband so that only the radio bit of the file is flashed
And welcome back from the dark side...iOS is like swearing here...
Click to expand...
Click to collapse
HIiii ..
i had troubles downloading the FTF file, so after some googling i decided to make my own 1.
1- i downloaded SUS
2- updated my phone
3- got the 3 update files from the file db
4- downloaded the latest Flashtool 0.9.10.1 from th official page
here comes a problem ..
there's no toolbox in this flash tool, so i wasn't able to decrype the files, i also couldn't fine LT29i in th devices list.
after some googling i downloaded th 0.9.10.2beta6 from this forum, which has a toolbox
1- i ran flashtool 0.9.10.2beta6
2- decrypt th files
3- created the FTF file
4- flash-mode
5- connected my xperia while pressing th volume key
6- phone connected in flash mode .... stuck here
7- nothing happened after that.
so i tried to flash it with 0.9.10.1
i just didn't have the option to exclude baseband from the list.
so :
1- i went back to 0.9.10.2beta6
2- i created a FTF file with baseband excluded from the hole file
3- i put the file in the 0.9.10.1 folders
4- i ran flashtool 0.9.10.1
5- flashed the phone
6- turned my phone on
8- every thing is OK BUT i still dnt have 3G coverage
can u help ?
Have you tried just a repair via PC Companion? Flashtool seems a bit long winded when PCC should do all this for you.
Wobba-Lee said:
Have you tried just a repair via PC Companion? Flashtool seems a bit long winded when PCC should do all this for you.
Click to expand...
Click to collapse
It was after updating using pcc that theproblems started....so he has to take that out of the process
Dodger86 said:
HIiii ..
i had troubles downloading the FTF file, so after some googling i decided to make my own 1.
1- i downloaded SUS
2- updated my phone
3- got the 3 update files from the file db
4- downloaded the latest Flashtool 0.9.10.1 from th official page
here comes a problem ..
there's no toolbox in this flash tool, so i wasn't able to decrype the files, i also couldn't fine LT29i in th devices list.
after some googling i downloaded th 0.9.10.2beta6 from this forum, which has a toolbox
1- i ran flashtool 0.9.10.2beta6
2- decrypt th files
3- created the FTF file
4- flash-mode
5- connected my xperia while pressing th volume key
6- phone connected in flash mode .... stuck here
7- nothing happened after that.
so i tried to flash it with 0.9.10.1
i just didn't have the option to exclude baseband from the list.
so :
1- i went back to 0.9.10.2beta6
2- i created a FTF file with baseband excluded from the hole file
3- i put the file in the 0.9.10.1 folders
4- i ran flashtool 0.9.10.1
5- flashed the phone
6- turned my phone on
8- every thing is OK BUT i still dnt have 3G coverage
can u help ?
Click to expand...
Click to collapse
The problem is the file that pccompanion is downloading for you. It has the wrong baseband. That's why you need to get another ftf file for your phone.
If you create a ftf file from your pccompanion (Or SUES) download you will still be using the wrong files.
What was the issue with downloading the ftf file?
gregbradley said:
It was after updating using pcc that theproblems started....so he has to take that out of the process
The problem is the file that pccompanion is downloading for you. It has the wrong baseband. That's why you need to get another ftf file for your phone.
If you create a ftf file from your pccompanion (Or SUES) download you will still be using the wrong files.
What was the issue with downloading the ftf file?
Click to expand...
Click to collapse
i tried to download th global version from josenoguera.es .. it seems like the link is not alive.
i also found it on 4shared .. but it was sooo slaw and unstable download.
would you plz give me a link for a good FTF file for Xperia TX ?
and i also need a flashtool with a toolbox for TX
Thanks
Any of these
Xperia TX 9.1.B.0.411
[STOCK FIRMWARE]LT29i_9.1.B.0.411_Global.ftf by thejosetree
[STOCK FIRMWARE] [FTF] Xperia TX (LT29i) 9.1.В.0.411 (cust.1266-6178)Russia - Android 4.1.2 Jelly Bean by dogsly
[STOCK FIRMWARE][STOCK FW] Xperia TX LT29i 9.1.B.0.411 Jelly Bean France FTF by BreckZeBoulay
[STOCK FIRMWARE][STOCK FW] Xperia TX LT29i 9.1.B.0.411 Jelly Bean Malaysian FTF by AmeiN
[STOCK FIRMWARE][Stock][FTF][TX/LT29i] 9.1.B.0.411 Taiwan by zx4636313
[STOCK FIRMWARE]Xperia TX Jelly Bean Hong Kong (Version not provided) by m2toby
Find them in post 3 of the all in one thread.
For flashtool, find it in the first post of the first thread in the dev section.
If PCC is downloading the wrong basband shouldnt it have killed the 3G on everyones TX who has updated to JB using PCC?
IMHO I feel that something went wrong at the time of update specific to this user and rerunning the process would fix it.
Wobba-Lee said:
If PCC is downloading the wrong basband shouldnt it have killed the 3G on everyones TX who has updated to JB using PCC?
IMHO I feel that something went wrong at the time of update specific to this user and rerunning the process would fix it.
Click to expand...
Click to collapse
No, he already tried that.
It seems it is downloading a wrong ftf file because of a corrupt build.prop or some changes made prior to using pccompanion.
If you change the device name to something else it prompts pccompanion to download another set of files.
That's how people manage to download multiple ftf files for different regions and different operators. They change their build.prop.
This is the first step in a problem solving process and if it doesn't work it could be something else, but he has stated he has already tried repairing using pccompanion
gregbradley said:
No, he already tried that.
It seems it is downloading a wrong ftf file because of a corrupt build.prop or some changes made prior to using pccompanion.
If you change the device name to something else it prompts pccompanion to download another set of files.
That's how people manage to download multiple ftf files for different regions and different operators. They change their build.prop.
This is the first step in a problem solving process and if it doesn't work it could be something else, but he has stated he has already tried repairing using pccompanion
Click to expand...
Click to collapse
Fair enough. I cant see the post were they stated they had already tried that. I was under the impression the build.prop hadnt been touched as they stated root wasnt available to them until after the upgrade. Also I would assume TX is TX it is not like T/TL if the wrong update was pushed via PCC the deivce would not boot at all.
Yeah, I just looked back through the thread, I may be getting mixed up, I have so many people I am currently helping on this forum and in PM....
@OP
Did you try to repair the phone using PCCompanion or SUES yet?
gregbradley said:
Yeah, I just looked back through the thread, I may be getting mixed up, I have so many people I am currently helping on this forum and in PM....
@OP
Did you try to repair the phone using PCCompanion or SUES yet?
Click to expand...
Click to collapse
i was on ICS 4.0.4 .. working on 3G sim
upgraded to JB 4.1.2 via PCC .. no 3G coverage
rooted the phone .. no 3G coverage
reparing via PCC ,, no 3G coverage
updated via SUS .. no 3G coverage
flashed with my own FTF excluding baseband .. no 3G coverage
now flashed with (LT29i_9.1.B.0.411_FR_Unbranded.ftf) using flashtool 0.9.8.0 excluding baseband .. still no 3G coverage
GSM sim is working normally in all previous processes
now dnt know what to do !!
i basically bought xperia Tx to use 3G sim
any other ideas ??
Dodger86 said:
i was on ICS 4.0.4 .. working on 3G sim
upgraded to JB 4.1.2 via PCC .. no 3G coverage
rooted the phone .. no 3G coverage
reparing via PCC ,, no 3G coverage
updated via SUS .. no 3G coverage
flashed with my own FTF excluding baseband .. no 3G coverage
now flashed with (LT29i_9.1.B.0.411_FR_Unbranded.ftf) using flashtool 0.9.8.0 excluding baseband .. still no 3G coverage
GSM sim is working normally in all previous processes
now dnt know what to do !!
i basically bought xperia Tx to use 3G sim
any other ideas ??
Click to expand...
Click to collapse
why are you excluding baseband...the whole point is to exclude everything EXCEPT baseband!
the baseband controls the radio.
try your FTF file again in flashtool and tick all exclude options EXCEPT baseband
let me know how it goes
Just out of curiosity have you tried: Settings -> Xperia -> Internet Settings?

[Q] The phone is useless, HELP

I updated my to 4.4.4 via Sony PC Companion and then rooted it with easyrootool and installed the dualrecovery. Everything seemed fine but after the first reboot i noticed that the there is no cellular connectivity. Wifi and Bluetooth work and the sim is recognized but the the phone says'inavlid card'. The phone sim unlocked. Not only that but my phone doesn't want to take pictures anymore. The camera doesn't focus and when I press the camera button it does nothing. Also when I connect the phone to the computer and try to copy somthing the windows explorer doesn't respond either way. I tried to repair the software via Pc Companion but it gave me the same result. To be clear the bootloader is locked and there was no sim lock but when i enter the service info i get this. Please anyone that can help ?
You tried with different SIM card?
Or just try to reinsert SIM card.
Try to go to recovery and wipe cache (both cache)
If that doesn't help, flash ftf again and test everything before you root device.
Sent from my D6503 using Tapatalk
funky0308 said:
You tried with different SIM card?
Or just try to reinsert SIM card.
Try to go to recovery and wipe cache (both cache)
If that doesn't help, flash ftf again and test everything before you root device.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
I tried a different card with the same result. I am currently on stock without root and dualrecovery. what do you suggest?
FahmyAbou said:
I tried a different card with the same result. I am currently on stock without root and dualrecovery. what do you suggest?
Click to expand...
Click to collapse
If it's still not working - I would flash last good ftf (be sure that one worked before)
Test everything...
If everything is working, flash 4.4.4 ftf but exclude baseband files....
Then check is it O.K...
And yeah...full wipe is something you should do now...
You have to get rid of old files...
Sent from my D6503 using Tapatalk
funky0308 said:
If it's still not working - I would flash last good ftf (be sure that one worked before)
Test everything...
If everything is working, flash 4.4.4 ftf but exclude baseband files....
Then check is it O.K...
And yeah...full wipe is something you should do now...
You have to get rid of old files...
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
OK I'll try that now but do you have any idea what couls have caused these problems? the camera, cellular network and storage
FahmyAbou said:
OK I'll try that now but do you have any idea what couls have caused these problems? the camera, cellular network and storage
Click to expand...
Click to collapse
Who knows...
Something in flashing process screwed firmware...
I'm sure everything will be OK after new flashing...
Signal could be problem again, that's why I suggested - flash ftf without baseband files. -
So...
Flash older ftf (the one that was working before)
Test to be sure everything is working fine.
Flash new fw without baseband files.
Test it...
I'm using Generic DE or my country fw.
That's something you should do, Singapore, China or similar fw could be problem in EU or US...
Sent from my D6503 using Tapatalk
funky0308 said:
Who knows...
Something in flashing process screwed firmware...
I'm sure everything will be OK after new flashing...
Signal could be problem again, that's why I suggested - flash ftf without baseband files. -
So...
Flash older ftf (the one that was working before)
Test to be sure everything is working fine.
Flash new fw without baseband files.
Test it...
I'm using Generic DE or my country fw.
That's something you should do, Singapore, China or similar fw could be problem in EU or US...
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Thank you I will download it now and flash it and then give you the feedback
FahmyAbou said:
Thank you I will download it now and flash it and then give you the feedback
Click to expand...
Click to collapse
Sure....
If you have your carrier / country ftf, flash that first to test and to have right baseband/modem/radio files..
Sent from my D6503 using Tapatalk
I can't that specific one for my carier. It's Austrian A1
Try to downgrade to older rom, if then everything works fine then you may try upgrading again.
Sent from Xperia Z1, or maybe not anymore
So i tried to flash the FTF file with flashtool but i get an error
ERROR - Processing of system.sin finished with errors.
INFO - Ending flash session
I don't know what that means but the process is still running. Should I disconnect the phone or leave it?
EDIT: I tried it again with a different cable and it worked..now I have to see if it worked
@funky0308
I'm on firmware .757 now and the camera is working again and I can copy things from an to the phone but the problem with the signal is still there. It says that the simcard is invalid, but like i said the phone was sim unlocked
Try the simcard in another phone or try another sim card in your phone so that you can eliminate the chance of having a defective simcard
gregbradley said:
Try the simcard in another phone or try another sim card in your phone so that you can eliminate the chance of having a defective simcard
Click to expand...
Click to collapse
Tried different cards but none of them work

[Q] Lost network & relocked BL?

Hello,
I've a weird problem with my Xperia SP. Today i wanted to get back to rom based on stock rom to get miracast feature.
I downloaded newest existenz rom and williams kernel for stock based roms. Installation went fine system booted ok and everything worked fine. After some time phone turned off and didn't wanted to start. Only flashmode worked. I've decided to download stock .205 CE1 rom and flash it.
It booted up, sim card was recognized(had to write PIN). After that network was not found. Signal with red "X". I've tried to manually register to network but i could not.
Next thing is that after flashing stock rom fastboot mode stopped working. Service menu shows that Bootloader can not be unlocked even that it was unlocked before and flashtool(BLU option) shows that it is still unlocked. Flashtool also shows Bootloader: NOT_ROOTABLE.
I have actually no idea what have happend. Now i'm installing stock rom using Sony PC Companion but i think this wont help for network problem.
My main network is PLUS GSM(Poland network).
Could sim card die? It is old type card (almost 10 years) and i had to cut it manually to fit micro sim for the phone.
prntscr,com/45wtip (swap ','(comma) with '.'(dot))
KrychoPL said:
Hello,
I've a weird problem with my Xperia SP. Today i wanted to get back to rom based on stock rom to get miracast feature.
I downloaded newest existenz rom and williams kernel for stock based roms. Installation went fine system booted ok and everything worked fine. After some time phone turned off and didn't wanted to start. Only flashmode worked. I've decided to download stock .205 CE1 rom and flash it.
It booted up, sim card was recognized(had to write PIN). After that network was not found. Signal with red "X". I've tried to manually register to network but i could not.
Next thing is that after flashing stock rom fastboot mode stopped working. Service menu shows that Bootloader can not be unlocked even that it was unlocked before and flashtool(BLU option) shows that it is still unlocked. Flashtool also shows Bootloader: NOT_ROOTABLE.
I have actually no idea what have happend. Now i'm installing stock rom using Sony PC Companion but i think this wont help for network problem.
My main network is PLUS GSM(Poland network).
Could sim card die? It is old type card (almost 10 years) and i had to cut it manually to fit micro sim for the phone.
prntscr,com/45wtip (swap ','(comma) with '.'(dot))
Click to expand...
Click to collapse
Use flashtool to flash stock firmware by ftf file. Here:
http://forum.xda-developers.com/showthread.php?t=2311964
Use an older one and if that does not work, try one or two more. Hopefully, that will help. Best of luck!
shahrukhqasim said:
Use flashtool to flash stock firmware by ftf file. Here:
http://forum.xda-developers.com/showthread.php?t=2311964
Use an older one and if that does not work, try one or two more. Hopefully, that will help. Best of luck!
Click to expand...
Click to collapse
Does it matter which country is it for? I can try some of them but i think that won't help. I've checked other sim card and it was recognized but didn't even ask me for pin. Weird Oo.
If nothing helps i will just flash stock firmware with SEUS and let sony service take care of it, hopefully. Phone still has guarantee.
KrychoPL said:
Does it matter which country is it for? I can try some of them but i think that won't help. I've checked other sim card and it was recognized but didn't even ask me for pin. Weird Oo.
If nothing helps i will just flash stock firmware with SEUS and let sony service take care of it, hopefully. Phone still has guarantee.
Click to expand...
Click to collapse
Regions perhaps. But the thing that does not make sense it that that why did it work before and not now? It should work. Anyway, my SIM was mini too. I, too, had to cut it. It works. Or possibly contact your service provider maybe something is wrong with the SIM. They might have have locked it or something?
shahrukhqasim said:
Regions perhaps. But the thing that does not make sense it that that why did it work before and not now? It should work. Anyway, my SIM was mini too. I, too, had to cut it. It works. Or possibly contact your service provider maybe something is wrong with the SIM. They might have have locked it or something?
Click to expand...
Click to collapse
If none sim card works on phone then it is IMEI problem or phone itself somehow. I'm trying to flash other roms now. Hopefully it will help if not then sending to service.
KrychoPL said:
Hello,
I've a weird problem with my Xperia SP. Today i wanted to get back to rom based on stock rom to get miracast feature.
I downloaded newest existenz rom and williams kernel for stock based roms. Installation went fine system booted ok and everything worked fine. After some time phone turned off and didn't wanted to start. Only flashmode worked. I've decided to download stock .205 CE1 rom and flash it.
It booted up, sim card was recognized(had to write PIN). After that network was not found. Signal with red "X". I've tried to manually register to network but i could not.
Next thing is that after flashing stock rom fastboot mode stopped working. Service menu shows that Bootloader can not be unlocked even that it was unlocked before and flashtool(BLU option) shows that it is still unlocked. Flashtool also shows Bootloader: NOT_ROOTABLE.
I have actually no idea what have happend. Now i'm installing stock rom using Sony PC Companion but i think this wont help for network problem.
My main network is PLUS GSM(Poland network).
Could sim card die? It is old type card (almost 10 years) and i had to cut it manually to fit micro sim for the phone.
prntscr,com/45wtip (swap ','(comma) with '.'(dot))
Click to expand...
Click to collapse
i got the exact same problem right now after using william kernel, can you fix it?
Muh_lukman94 said:
i got the exact same problem right now after using william kernel, can you fix it?
Click to expand...
Click to collapse
I've reflashed stock rom using SEUS and sended phone to sony service. Hopefully they can help. Be careful with Williams Kernel for stock roms. This may be a common bug.
For anyone who had the same problem. Sony exchanged my whole phone with information that mainboard was broken. They said that phone could not be fixed.
Good luck
PS. Topic can be closed i think.
KrychoPL said:
For anyone who had the same problem. Sony exchanged my whole phone with information that mainboard was broken. They said that phone could not be fixed.
Good luck
PS. Topic can be closed i think.
Click to expand...
Click to collapse
Where have you been before? I have the same problem after flashing William kernel for stock rom((( What to do now?
Everything i've done is described in the thread. Phone was exchanged by sony after all.
KrychoPL said:
Everything i've done is described in the thread. Phone was exchanged by sony after all.
Click to expand...
Click to collapse
I think i have the same problem, but up till now no one knows the answer, the biggest problem is my warranty is over, i hope someone here can help :crying:
---------- Post added at 07:29 PM ---------- Previous post was at 07:24 PM ----------
KrychoPL said:
Everything i've done is described in the thread. Phone was exchanged by sony after all.
Click to expand...
Click to collapse
I have the same problem here, and the biggest problem is my warranty expired, hope someone here can help..
Muh_lukman94 said:
i got the exact same problem right now after using william kernel, can you fix it?
Click to expand...
Click to collapse
do a restore of Your TA will fix the problem, now my phone can detect SIM card

[Q] How to fully restore Xperia Z1

Hi,
Im trying to restore Xperia Z1 original firmware (that can get updates from Sony) and I cant seem to succeed...
I have used flashtool but the software is just not right:
I can't use Wi-Fi, the sim is not working anymore (Im from Israel), everytime the phone get shut down - it asks me in what language do I want to use...
`I have tried using PC companion (Repair) also` but it tells me that my phone doesnt have an update.
I dont know what to do anymore
any advice?
Just download a rom for your model z1 and use, 'Flashtool' to flash the image.
sm.vassallo said:
Just download a rom for your model z1 and use, 'Flashtool' to flash the image.
Click to expand...
Click to collapse
I did that.
The IMEI is gone. Nothing seems to work ...
its probably because the flash version is not compatible with the baseband. Try flashing an older version (for eg. .108 version : u can get it from mega ftf thread in general section) and then after the flash, pc companion should detect and install the latest update.

Invalid Card Message

I updated my xperia z1(c6906) to 5.1.1 using flashtool. i am from bahrain and the ftf file was US generic. after update my phone shows Invalid sim message. I tried installing older firmwares but still no use. Rest everything works fine.
what should i do?
I had installed c6903 ftf file so does it effect the phone?
prashanth0626 said:
I updated my xperia z1(c6906) to 5.1.1 using flashtool. i am from bahrain and the ftf file was US generic. after update my phone shows Invalid sim message. I tried installing older firmwares but still no use. Rest everything works fine.
what should i do?
I had installed c6903 ftf file so does it effect the phone?
Click to expand...
Click to collapse
If your phone is 6906 than you should only use 6906 firmwares to update your phone.
Hasn't their been a update notification on your phone?
motorazrv3 said:
If your phone is 6906 than you should only use 6906 firmwares to update your phone.
Hasn't their been a update notification on your phone?
Click to expand...
Click to collapse
I managed to get the original customization version for middleeast, after installing its the same.
I tried checking for an update via Sony companion. it says i have the recent update. is something wrong with the sim card reader in phone?
prashanth0626 said:
I managed to get the original customization version for middleeast, after installing its the same.
I tried checking for an update via Sony companion. it says i have the recent update. is something wrong with the sim card reader in phone?
Click to expand...
Click to collapse
I don't know. I think it has something to do with the baseband maybe.
I never had the situation that I flashed a wrong firmware to my phone.
Are you sure you downloaded the firmware you needed?
Have you tried the repair function from pc Companion?
motorazrv3 said:
I don't know. I think it has something to do with the baseband maybe.
I never had the situation that I flashed a wrong firmware to my phone.
Are you sure you downloaded the firmware you needed?
Have you tried the repair function from pc Companion?
Click to expand...
Click to collapse
yeah, managed to get the right middleeast firmware. i even tried repair option through pc companion. its still the same.
prashanth0626 said:
yeah, managed to get the right middleeast firmware. i even tried repair option through pc companion. its still the same.
Click to expand...
Click to collapse
check your IMEI , its okey or 0000?
Read this

Categories

Resources