Finger touch area to small? - T-Mobile Galaxy Note 4 Q&A, Help & Troubleshooting

So I tried to update TWRP and it said unsuccessful because I probably had the latest version. (Using TWRP manager) Then a box popped up asking if I wanted to boot into recovery, I hit ok because I had to install something.
When it loaded it was stretched out and I ha had to touch above the buttons to use them. Figuring it was just TWRP being silly I rebooted and now the whole phone is doing it. It's like the area it registers touch was shrunk. The pen works fine, and that's how I'm typing this now.
Any ideas on what happened/how to fix it? I've tried rebooting a few times, and changing the dpi.
Sent from my SM-N910T3

If you can, try taking a backup using TWRP and then ODIN to stock to see if that changes anything.

Does anyone have the stock firmware for the T3? I can't find them

collinstheclown said:
Does anyone have the stock firmware for the T3? I can't find them
Click to expand...
Click to collapse
http://forum.xda-developers.com/not...t/dofc-n910t-t3-tekxxxx-n4-urv0-8-11-t3176500
It never fails, search and search and find nothing. Post about it and find it in 2 seconds..
Will update when I'm done

Finally back to stock, still having the issue. Is there a guide to removing TWRP, looks like it'll have to go in for repair

collinstheclown said:
Finally back to stock, still having the issue. Is there a guide to removing TWRP, looks like it'll have to go in for repair
Click to expand...
Click to collapse
Odin the base and it'll be removed

I don't have the files to Odin.
I just got my replacement, can anyone tell me how to pull the files I need from it to flash to the old phone?

Related

[Q] Seriously? Why does my new captivate constantly brick?

Sorry for the long read, this is half rant and half question.
Alright, I got a captivate a long time ago (about a year and 3 months ago), loved it, rooted it and installed cyanogenmod as soon as I got home, changed roms and kernals constantly, did whatever I wanted to do.
About 3 months ago my screen stopped working.. So I take it in and they give me a refurb captivate, looked brand new so I didn't mind. However, when I tried to get into recovery it didn't work, the 3-button-method just wouldn't work at all, period, so I try to get it to work, gets stuck in bootloop.. pretty much every time I try to flash a rom something goes wrong and I get stuck in a bootloop but I can usually get into recovery or download mode because I had CWM.
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
I guess my only option is to usb jig it, but honestly now I'm convinced that the phone is just faulty, I want to run the thing over.
-Pirate said:
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
Click to expand...
Click to collapse
If you would have actually searched you would have known it was a bug in the glitch. There are atleast 40 pages about that.
-Pirate said:
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Click to expand...
Click to collapse
If you flashed ICS you should know it takes 2 flashes for it to work first time. Having a jig around is always a good idea as well.
-Pirate said:
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
Click to expand...
Click to collapse
Stuff doesn't work as intended. Keep in mind everything is still in dev and not all devices are the same. But you should have searched a little more and it would have ran =/
U def don't need a jig. If it's booting it's not bricked. Try removing battery, start Odin, hold down power and down, plug in and put battery in. This should bring u to download mode.
prbassplayer said:
If you would have actually searched you would have known it was a bug in the glitch. There are atleast 40 pages about that.
Click to expand...
Click to collapse
I did start to see a few people with the problem, however many people do not follow up with what fixes their problem, and I did what a few people had said to do.
prbassplayer said:
If you flashed ICS you should know it takes 2 flashes for it to work first time. Having a jig around is always a good idea as well.
Click to expand...
Click to collapse
I should of mentioned that I did flash a few times, 3 total I think, it was getting stuck at boot.
prbassplayer said:
Stuff doesn't work as intended. Keep in mind everything is still in dev and not all devices are the same. But you should have searched a little more and it would have ran =/
Click to expand...
Click to collapse
I understand that **** happens but honestly my old captivate could always get into recover mode and download mode no matter what, it's extremely frustrating that something changed with the newer models. One of my questions was what caused the brick? I did nothing wrong from what I see and it was running perfectly until I tried to restart/boot into recovery.
Oh and mbc663, thanks but download mode doesn't work at all, nor does recovery obviously.
I can't say exactly what you are doing. Best advice I can do Re download your .zips Flash back to stock GB and try again.
-Pirate said:
About 3 months ago my screen stopped working.. So I take it in and they give me a refurb captivate, looked brand new so I didn't mind. However, when I tried to get into recovery it didn't work, the 3-button-method just wouldn't work at all, period, so I try to get it to work, gets stuck in bootloop.. pretty much every time I try to flash a rom something goes wrong and I get stuck in a bootloop but I can usually get into recovery or download mode because I had CWM.
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
I guess my only option is to usb jig it, but honestly now I'm convinced that the phone is just faulty, I want to run the thing over.
Click to expand...
Click to collapse
Last year, I had issues with my original Cap, and got a "new" one. I learned that the bulk of the Caps going out as replacements are referbs. The one I got was a 1008 build, and does not have 3 button recovery. There are minor differences with each and every Cap that's out there. That's why some have issues with ROM's and some don't, some can over clock like crazy, and some can't at all. My guess is you have a 1008 as well, but that really doesn't matter. You just have a different device and as you seem to already have learned.
It sounds like there is more research you need to do. Even though the devices are a bit different, if you are having issues with ROM's loading, then I would say it's more of a procedure issue, than one with your device.
My procedure, is,
Remove SD/Micro SD
Odin1 Click to Stock JF6, and Master Clear(This will erase EVERYTHING)
Root with One-Click Root
Use Sideload Wonder Machine to install ROM Manager, copy update.zip and 3buttonFix to my SD, then reboot into recovery
Once in recovery I install the 3buttonFix, and install my new ROM
For me this has proven to be a very good method versus going from one ROM to another. The Master Clear cleans EVERYTHING off of your SD, so there is no chance for anything to corrupt your new install. Anytime I read a post of a install gone FUBAR, USUALLY a Flash To Stock/Master Clear (FTS/MC) fixes it
Before using Odin 1 Click, check your devices build number!! If it is higher than 1012, I would NOT recommend using 1 click, there is a higher chance of hard brick on the newer devices
Kangi...if you flash a firmware package without bootloaders, you won't have to do the 3 button fix every time. And if you keep a copy of the update.zip on your pc you don't have to even root, let alone bother with side loading ROM manager.
Cezar has a no boots jf6 and after you run that, you can still use master clear in one click.
Sounds like you got one of the refurbs that is missing the SBL. Have you looked at this thread? http://forum.xda-developers.com/showthread.php?t=1129821
I've not had this problem myself but it sounds like that might help. If I remember reading correctly, once this is flashed it should stick as long as you don't flash any other bootloaders on top of it.
Its not missing the sbl. The sbl it has doesn't respond to key combos. Derpa sherpa moment for samsung I guess?
Rofl yeah...if it was missing the sbl it would be fuggin bricked!
studacris said:
Kangi...if you flash a firmware package without bootloaders, you won't have to do the 3 button fix every time. And if you keep a copy of the update.zip on your pc you don't have to even root, let alone bother with side loading ROM manager.
Cezar has a no boots jf6 and after you run that, you can still use master clear in one click.
Click to expand...
Click to collapse
I know, thanks. I'm such a creature of habit, I started doing it like this a bit over a year ago, and has worked flawlessly for me(just jinxed myself!) so I never saw a reason to "fix what aint broke".
I'll take a look at Cezar's thanks!
Yeah, missing SBL was a poor choice of words. My bad.
kangi26 said:
Last year, I had issues with my original Cap, and got a "new" one. I learned that the bulk of the Caps going out as replacements are referbs. The one I got was a 1008 build, and does not have 3 button recovery. There are minor differences with each and every Cap that's out there. That's why some have issues with ROM's and some don't, some can over clock like crazy, and some can't at all. My guess is you have a 1008 as well, but that really doesn't matter. You just have a different device and as you seem to already have learned.
It sounds like there is more research you need to do. Even though the devices are a bit different, if you are having issues with ROM's loading, then I would say it's more of a procedure issue, than one with your device.
My procedure, is,
Remove SD/Micro SD
Odin1 Click to Stock JF6, and Master Clear(This will erase EVERYTHING)
Root with One-Click Root
Use Sideload Wonder Machine to install ROM Manager, copy update.zip and 3buttonFix to my SD, then reboot into recovery
Once in recovery I install the 3buttonFix, and install my new ROM
For me this has proven to be a very good method versus going from one ROM to another. The Master Clear cleans EVERYTHING off of your SD, so there is no chance for anything to corrupt your new install. Anytime I read a post of a install gone FUBAR, USUALLY a Flash To Stock/Master Clear (FTS/MC) fixes it
Before using Odin 1 Click, check your devices build number!! If it is higher than 1012, I would NOT recommend using 1 click, there is a higher chance of hard brick on the newer devices
Click to expand...
Click to collapse
I didn't think anyone else was going to reply to this thread, whoops.
Thank you for helping me, but I'm still having trouble.
Rom manager doesn't show up in Market, Sideload wonder machine tells me [INSTALL FAILED OLDER SDK] with any apk of Rom manager I find.
kangi26 said:
3buttonFix to my SD, then reboot into recovery
Click to expand...
Click to collapse
How do you reboot into recovery when 3buttonfix hasn't been applied yet?
This sucks and is extremely frustrating, I feel like my captivate is just trolling me.
-Pirate said:
I didn't think anyone else was going to reply to this thread, whoops.
Thank you for helping me, but I'm still having trouble.
Rom manager doesn't show up in Market, Sideload wonder machine tells me [INSTALL FAILED OLDER SDK] with any apk of Rom manager I find.
How do you reboot into recovery when 3buttonfix hasn't been applied yet?
This sucks and is extremely frustrating, I feel like my captivate is just trolling me.
Click to expand...
Click to collapse
When I get home later tonight I'll link you everything you'll need. Again, VERY important, what is your build number? If it's 1012 or higher, don't use Odin 1 click
Sent from a autonomous device
kangi26 said:
When I get home later tonight I'll link you everything you'll need. Again, VERY important, what is your build number? If it's 1012 or higher, don't use Odin 1 click
Sent from a autonomous device
Click to expand...
Click to collapse
Ok, finally got it working, I did exactly what you said, I found the rom manager 3.00.002 or whatever and that worked with sideloader, it took some messing around with but I'm running ICS now, thank you so much man, you've helped me so much, and now I can change roms and keep up to date without worrying about constantly soft-bricking.
As for my build number, I'm not sure, the only thing I see under build number in settings is: "IML74k"
-Pirate said:
Ok, finally got it working, I did exactly what you said, I found the rom manager 3.00.002 or whatever and that worked with sideloader, it took some messing around with but I'm running ICS now, thank you so much man, you've helped me so much, and now I can change roms and keep up to date without worrying about constantly soft-bricking.
As for my build number, I'm not sure, the only thing I see under build number in settings is: "IML74k"
Click to expand...
Click to collapse
The build number is actually under your battery, and looks like 10.06, 10.07, 10.08 and so on. It is the production date
Edit** And as a side note, do NOT try to use the 3buttonFix with a GB ROM, it WILL brick your phone in a really bad way. ONLY use it with 2.1 or 2.2
kangi26 said:
The build number is actually under your battery, and looks like 10.06, 10.07, 10.08 and so on. It is the production date
Edit** And as a side note, do NOT try to use the 3buttonFix with a GB ROM, it WILL brick your phone in a really bad way. ONLY use it with 2.1 or 2.2
Click to expand...
Click to collapse
Is it weird that I don't have a build number? It seems I can't post pictures without a few more posts, maybe this will work: deleted
And thanks for the warning on the 3buttonfix, I'm going to have to read more about bootloaders though, I don't understand what you and studacris were talking about earlier in the thread, haha.
-Pirate said:
Is it weird that I don't have a build number? It seems I can't post pictures without a few more posts, maybe this will work: imgurDOTcom/26sXGl.jpg
And thanks for the warning on the 3buttonfix, I'm going to have to read more about bootloaders though, I don't understand what you and studacris were talking about earlier in the thread, haha.
Click to expand...
Click to collapse
I havent seen that before, there doesnt seem to be a build#
Might want to pull that photo, it's not too good having your IMEI number publicly displayed
kangi26 said:
I havent seen that before, there doesnt seem to be a build#
Might want to pull that photo, it's not too good having your IMEI number publicly displayed
Click to expand...
Click to collapse
Maybe because it's a refurb? and whoops didn't think about that.
-Pirate said:
Maybe because it's a refurb? and whoops didn't think about that.
Click to expand...
Click to collapse
I'm not sure why, mine is a referb, and I have a sticker with mine on it. Ooh well, it is what it is
Sent from a autonomous device

Hard Brick .... PLEASE help, I've tried everything

So, I've tried literally every video, or walkthrough I could find via youtube or this site and I am still stuck in a boot loop right now at the unlock custom screen.
I've tried using odin to go back to stock completely, i've tried the battery removal / wipe data etc option, I don't know what else to do here.
If anyone could help, I'd really appreciate it. At this point I'm pretty desperate.
Which firmware version are you on? What were you doing when it bricked (flashing a ROM, rooting, etc)? Am I correct in assuming you're rooted because of the custom padlock icon?
Have you tried giving it a few minutes to boot up before pulling the battery? I thought my phone was bricked once, but all it needed was ~5 minutes to get going. Give it a good 10 minutes or so to boot up. If that doesn't work, report back with the information I requested and we'll go from there.
Face_Plant said:
Which firmware version are you on? What were you doing when it bricked (flashing a ROM, rooting, etc)? Am I correct in assuming you're rooted because of the custom splash screen?
Click to expand...
Click to collapse
MJ5 ... flashing FireNote Rom
Problem I was having is I was using KnoxRaid Rom, well that rom is dead / thread locked so I figured I would try FireNote. When I rebooted to flash FireNote, I noticed Safestrap wasn't there anymore. I tried re-installing Safestrap a few times with no luck. After a factory wipe / reset, Safestrap magically re-appeared and was available for me to use. I figured what the hell, I'll flash FireNote. When I did, I noticed it was more or less a hodge-podge of the two Rom's and not a clean install. When I did the wipe again to re-install FireNote, I'm now stuck at the spash screen and have been since early this morning.
And yea, I've given it quite some time ... 10+ minutes, even an hour. Nothing.
daigled said:
And yea, I've given it quite some time ... 10+ minutes, even an hour. Nothing.
Click to expand...
Click to collapse
try mj5 restore, if that fails just call AT&T and they will send you a new one free in the mail (takes about a week though)
BeastSpencer said:
try mj5 restore, if that fails just call AT&T and they will send you a new one free in the mail (takes about a week though)
Click to expand...
Click to collapse
I tried MJ5 restore. Maybe there's a different method I can try that you can point me to directly?
Were you on the Jellybean or KitKat version of Knoxraid? If you were on the KitKat version then the problem sounds like you tried to flash a JB ROM on top of a KK ROM without reverting back to JB first. Have you tried the MJ5 restore yet? I believe the thread is in the general section. I'll grab the link for you in a minute.
Edit- here's the link: http://forum.xda-developers.com/showthread.php?t=2559715
daigled said:
I tried MJ5 restore. Maybe there's a different method I can try that you can point me to directly?
Click to expand...
Click to collapse
really? are you sure you followed all steps? what happened when you finished? worked for my brick
Face_Plant said:
Were you on the Jellybean or KitKat version of Knoxraid? If you were on the KitKat version then the problem sounds like you tried to flash a JB ROM on top of a KK ROM without reverting back to JB first. Have you tried the MJ5 restore yet? I believe the thread is in the general section. I'll grab the link for you in a minute.
Click to expand...
Click to collapse
I think you're right. I was on the KK version and FireNote is on JB.
daigled said:
I think you're right. I was on the KK version and FireNote is on JB.
Click to expand...
Click to collapse
bad idea :/
BeastSpencer said:
really? are you sure you followed all steps? what happened when you finished? worked for my brick
Click to expand...
Click to collapse
Yea, definitely followed all the steps ... haven't moved from my computer chair for the last 6hrs lol. Only thing it did when I was finished is to go back to the splash screen and sit there.
Looks like Beast beat me to mentioning the MJ5 restore Check out the link I posted. Make sure you follow all of the steps EXACTLY how they're posted and you should be able to get going again.
daigled said:
Yea, definitely followed all the steps ... haven't moved from my computer chair for the last 6hrs lol. Only thing it did when I was finished is to go back to the splash screen and sit there.
Click to expand...
Click to collapse
as a last resort, you can call at&t i guess :/
try flashing MJ5 images from sammobile.com in odin
Face_Plant said:
Looks like Beast beat me to mentioning the MJ5 restore Check out the link I posted. Make sure you follow all of the steps EXACTLY how they're posted and you should be able to get going again.
Click to expand...
Click to collapse
I found that thread, followed it EXACTLY and still am having the same outcome =/
Maybe some of the files are corrupt. Try uninstalling Heimdall, the Microsoft plugins, delete everything you downloaded (Odin, the .tar files, etc), and redownload them and try again. On top of that, I would delete all of your USB drives and have Windows reinstall them or download them from Samsung's website. That way you will start nice and fresh and hopefully get out of this mess.
Face_Plant said:
Maybe some of the files are corrupt. Try uninstalling Heimdall, the Microsoft plugins, delete everything you downloaded (Odin, the .tar files, etc), and redownload them and try again. On top of that, I would delete all of your USB drives and have Windows reinstall them or download them from Samsung's website. That way you will start nice and fresh and hopefully get out of this mess.
Click to expand...
Click to collapse
Ok, I'll try that next... Thanks bro, i'll check back in after and let you know.
No problem. Let me know how it goes.
Oh, one more thing: have you tried different USB ports on your PC and/or different USB cables? In the past I've found that it's a must to use the USB cable that came with the phone for anything other than charging.
Face_Plant said:
No problem. Let me know how it goes.
Oh, one more thing: have you tried different USB ports on your PC and/or different USB cables? In the past I've found that it's a must to use the USB cable that came with the phone for anything other than charging.
Click to expand...
Click to collapse
Yea, I've used different ports and only used the cable that came with it from the start.
Good. I'm betting it's a bad file or something didn't install properly that's causing your problem. I've used the MJ5 restore several times to get off of KitKat versions of Knoxraid with no problems, so I don't see why it shouldn't work for you.
Here's a tip: when you place the CSC file and the 28whatever file on your external SD card, rename them to "flash first" and "flash second" or something like that to avoid mixing them up. Renaming them won't hurt anything.
daigled said:
Yea, I've used different ports and only used the cable that came with it from the start.
Click to expand...
Click to collapse
try restoring with N900AUCECMLG_OneClickBin.exe ...i think it should work. http://forum.xda-developers.com/showthread.php?t=2619941

Need Stock Firmware G900AUCU2AND3!!!

I need the Stock Firmware version G900AUCU2AND3 So that I can flash back to stock. In the thread return to stock it has the previous version G900AUCU1ANCE. I get a error when trying to odin back (SW REV CHECK FAIL : [about]Fused 2 > Binary 1). So I am not sure how its done but need someone who has it do a dump or how ever its done to get it in a way that it can be flashed either by odin or in recovery... Any help will be appreciated... Thanks
i will need this too, i have my phone on at&t next and after a year i can trade it in, but if its custom os and stuff i cant return it, so i will need this too if i want to return to stock so i can upgrade to a new phone next year.
Bump: This is needed very badly. As I imagine many people had to take that bloat ware update. If anyone that has this firm ware has a problem and needs to restore back to stock. They won't be able to use the one that's listed in on this forum as its the older one, and now that there is Root. Its very likely this will happen daily that people will need it. I don't know exactly what soft bricked my phone so it can happen to anyone. My phone was fine until a reboot. Please, please, please. I'm begging everyone that has it. I asked Samsung and they wouldn't help. Next maybe going to AT&T store and having warranty claim done. I don't really want to find the out come of that.
I need this very badly as well. I rooted my phone and then tried to alter my screen density via an app I found on Google Play. It requested root, I granted the permission and then when the phone rebooted it hung on "Samsung Galaxy S5" splash screen and will no go any further. ODIN will not allow me to flash G900AUCU1ANCE firmware since I did the OTA update. If anyone could post up their G900AUCU2AND3, I would appreciate it very much.
kwikrat said:
I need this very badly as well. I rooted my phone and then tried to alter my screen density via an app I found on Google Play. It requested root, I granted the permission and then when the phone rebooted it hung on "Samsung Galaxy S5" splash screen and will no go any further. ODIN will not allow me to flash G900AUCU1ANCE firmware since I did the OTA update. If anyone could post up their G900AUCU2AND3, I would appreciate it very much.
Click to expand...
Click to collapse
I estimate we will get @ least One to two of these per-day until we get the files. Since we now have Root. It may take a bit as At&t version don't seem to have much for devs. Or ones that care to really help.(I'll probably get reamed for this. Sorry for you that help and for your time) I contacted At&t they told me they could not help but I could send my phone in for warranty exchange. Its that or go to BestBuy and they can flash it back. I don't have a Bestbuy Nearby.
Guys, check that post. Shortydoggg found a temporary fix for any soft bricks. It's for extreme cases. My phone is fine (apart from some deleted stock apps) so I'll hold off until i get some more info but if you cant boot at all, his method should come in handy.
http://forum.xda-developers.com/showthread.php?t=2785185&goto=newpost
+1 :highfive:
NotDavid said:
Guys, check that post. Shortydoggg found a temporary fix for any soft bricks. It's for extreme cases. My phone is fine (apart from some deleted stock apps) so I'll hold off until i get some more info but if you cant boot at all, his method should come in handy.
http://forum.xda-developers.com/showthread.php?t=2785185&goto=newpost
Click to expand...
Click to collapse
Thank you. The above link solved my problem. I am back up and running! At first data wasn't working other than wi-fi but I merely had to re-enter my APN that I got from here: http://forum.xda-developers.com/showthread.php?t=2746380 :good:
can you update to G900AUCU2AND3 after flashing this?
dave1977nj said:
can you update to G900AUCU2AND3 after flashing this?
Click to expand...
Click to collapse
YUP, I did the AT&T update check and got it immediately afterwards. I instead of flashing every one separately and rebooting loaded the three files so minus the Bl file. I did not have the problems of having to reload APN this way.
pcidiot said:
YUP, I did the AT&T update check and got it immediately afterwards. I instead of flashing every one separately and rebooting loaded the three files so minus the Bl file. I did not have the problems of having to reload APN this way.
Click to expand...
Click to collapse
Thanks!!! :good:
pcidiot said:
YUP, I did the AT&T update check and got it immediately afterwards. I instead of flashing every one separately and rebooting loaded the three files so minus the Bl file. I did not have the problems of having to reload APN this way.
Click to expand...
Click to collapse
A flash of the CSC file restores the APN after flashing the AP file, or flashing it together with the AP file, but it factory resets the phone. Flashing the AP file only is mostly for those who do not want a factory reset. But, a factory reset along with flashing only the AP file will indeed wipe the APN. I found all of that out through trial and error.
shortydoggg said:
A flash of the CSC file restores the APN after flashing the AP file, or flashing it together with the AP file, but it factory resets the phone. Flashing the AP file only is mostly for those who do not want a factory reset. But, a factory reset along with flashing only the AP file will indeed wipe the APN. I found all of that out through trial and error.
Click to expand...
Click to collapse
Thanks for your trials this will be useful to many.
pcidiot said:
Thanks for your trials this will be useful to many.
Click to expand...
Click to collapse
No problem.
dave1977nj said:
can you update to G900AUCU2AND3 after flashing this?
Click to expand...
Click to collapse
Yes do not root first, flash it then wait a few minutes then do a check for updates it will download the crap update with the yp yellow pages app,
then reboot and root
and take it away !!
pcidiot said:
Bump: This is needed very badly. As I imagine many people had to take that bloat ware update. If anyone that has this firm ware has a problem and needs to restore back to stock. They won't be able to use the one that's listed in on this forum as its the older one, and now that there is Root. Its very likely this will happen daily that people will need it. I don't know exactly what soft bricked my phone so it can happen to anyone. My phone was fine until a reboot. Please, please, please. I'm begging everyone that has it. I asked Samsung and they wouldn't help. Next maybe going to AT&T store and having warranty claim done. I don't really want to find the out come of that.
Click to expand...
Click to collapse
Same troubles here pcidiot!!!! soft bricked and nothing will load onto the phone. ODIN gives me the same kind of error as listed on the starting thread! I can get to recovery mode and Download (ODIN) mode on the phone but nothing wants to flash. Do we dump? Do we Erase Nand? CONFUSING!!! why is it so easy to bunk up a phone!
Achilles5410 said:
Same troubles here pcidiot!!!! soft bricked and nothing will load onto the phone. ODIN gives me the same kind of error as listed on the starting thread! I can get to recovery mode and Download (ODIN) mode on the phone but nothing wants to flash. Do we dump? Do we Erase Nand? CONFUSING!!! why is it so easy to bunk up a phone!
Click to expand...
Click to collapse
There should only be two boxes checked in odin thats f. reset time and auto reboot. Also Make sure you only check and load your firmware in the ap slot in odin. Now flash.
Achilles5410 said:
Same troubles here pcidiot!!!! soft bricked and nothing will load onto the phone. ODIN gives me the same kind of error as listed on the starting thread! I can get to recovery mode and Download (ODIN) mode on the phone but nothing wants to flash. Do we dump? Do we Erase Nand? CONFUSING!!! why is it so easy to bunk up a phone!
Click to expand...
Click to collapse
Are you following this guide?
http://forum.xda-developers.com/showpost.php?p=53454972&postcount=1
shortydoggg said:
Are you following this guide?
http://forum.xda-developers.com/showpost.php?p=53454972&postcount=1
Click to expand...
Click to collapse
Yea I did thank you. Did it today and thanked the poster too.
Want to start over! Need help!
So I want to do whats written out in step 4 of shorttydogs thread but I don't want to mess up or brick my phone. My goal is to start over and go back to stock with bloatware and everything that is available on stock if I were to go AT&T and buy it today. Here is a little background on my phone. My phone is rooted and I do have safestrap (and busybox). I backed up everything on my microSD card. I also have the g900AUCU2AND3 firmware on my phone. In addition, I deleted some but not all AT&T bloatware, which I want back. Lastly, for some reason the "add call button" during my calls is missing and was replaced with a "record" button I think this was because of me playing around with xposed. I deleted xposed framework as well as wanam and tried everything to get the "add call button" back but I couldn't. Thus, I just want to go back to stock to fix all these issues. I just have a few questions before I proceed just to make sure I'm not doing anything wrong.
1) If I flash the AP, CP and CSC files will I achieve 100% stock with bloatware?
2) Will this return my "add call button"?
3) Is it as simple as just using odin 3.09 and flashing the AP, CP, and CSC files?
4) I also understand that this will take me back to G900AUCU1ANCE but will I be able to do an OTA do go to G900AUCU2AND3?
5) Is there anything else I need to know to prevent my phone from bricking!
Sorry for the long post but I am fairly new to this stuff and don't want mess anything up!

[Q] Can you help me get my Recovery Menu back and possibly Stock FW

Okay so to start I followed this Tutorial http://forum.xda-developers.com/att-galaxy-s5/general/how-to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 all the way through and my phone was rooted and I was happy. One day I tried to install TWRP since this is what I used on my Galaxy s3 before this phone. It got stuck on on a boot loop. I eventually tried flashing every stock ROM which did not fix the problem because ODIN would fail when trying to flash. Eventually I tried flashing the "G900A_ND3_Stock_Kernel" supplied in the tutorial. My phone magically booted up and all my APPS and stuff was the same as I left it and it was still rooted. I decided not to mess with it anymore. This happened about a month ago.
Today, my phone had a notification saying that there was an update and I tapped remind me later. Eventually, I installed Titanium Back up to force closed the AT&T Software Update app the phone came with. Then. it automatically updated and eventually got stuck into the boot loop again. No problem, I fixed this before. What I noticed from the first time was that I had a screen that said "Secure Fail: Recovery. System software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest AT&T store for help" Once I flashed the stock kernel from the tutorial I never checked to see if the recover menu was there.
So right now I have my phone working and its rooted. I installed the "Phone Info" app and it says Bootloader Version:G900AUCU2ANG3. Eventually, my phone will try to update itself again and it will fail causing it to boot loop. I am not sure on what to do. Is there a way for me to have my recovery menu back? I just want to have the option in the future to revert everything back to normal in case I sell it or feel like having the newest OS. Also it would be cool to have a recovery menu on my phone again.
I know this was long but I needed to solve this problem before it gets out of hand in the future. Also I am pretty sure others have followed the tutorial and might have had the idea to update the OS or something else and had a problem similar to mine.
Thank You Very Much.
xtremegamer13 said:
Okay so to start I followed this Tutorial http://forum.xda-developers.com/att-galaxy-s5/general/how-to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 all the way through and my phone was rooted and I was happy. One day I tried to install TWRP since this is what I used on my Galaxy s3 before this phone. It got stuck on on a boot loop. I eventually tried flashing every stock ROM which did not fix the problem because ODIN would fail when trying to flash. Eventually I tried flashing the "G900A_ND3_Stock_Kernel" supplied in the tutorial. My phone magically booted up and all my APPS and stuff was the same as I left it and it was still rooted. I decided not to mess with it anymore. This happened about a month ago.
Today, my phone had a notification saying that there was an update and I tapped remind me later. Eventually, I installed Titanium Back up to force closed the AT&T Software Update app the phone came with. Then. it automatically updated and eventually got stuck into the boot loop again. No problem, I fixed this before. What I noticed from the first time was that I had a screen that said "Secure Fail: Recovery. System software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest AT&T store for help" Once I flashed the stock kernel from the tutorial I never checked to see if the recover menu was there.
So right now I have my phone working and its rooted. I installed the "Phone Info" app and it says Bootloader Version:G900AUCU2ANG3. Eventually, my phone will try to update itself again and it will fail causing it to boot loop. I am not sure on what to do. Is there a way for me to have my recovery menu back? I just want to have the option in the future to revert everything back to normal in case I sell it or feel like having the newest OS. Also it would be cool to have a recovery menu on my phone again.
I know this was long but I needed to solve this problem before it gets out of hand in the future. Also I am pretty sure others have followed the tutorial and might have had the idea to update the OS or something else and had a problem similar to mine.
Thank You Very Much.
Click to expand...
Click to collapse
So you're still rooted?
And if so using titanium backup just freeze the ATT update app I forget what it's called exactly but you'll know it when you see it and that'll stop your device from trying to automatically trying to update
OPOfreak said:
So you're still rooted?
And if so using titanium backup just freeze the ATT update app I forget what it's called exactly but you'll know it when you see it and that'll stop your device from trying to automatically trying to update
Click to expand...
Click to collapse
Yeah I'm still rooted and I found out about the freeze app option but do you know about the problem where I don't even have a recovery menu?
xtremegamer13 said:
Yeah I'm still rooted and I found out about the freeze app option but do you know about the problem where I don't even have a recovery menu?
Click to expand...
Click to collapse
You need to download the safe strap recovery menu. That is for rooted phones with locked bootloaders.
dirtydodge said:
You need to download the safe strap recovery menu. That is for rooted phones with locked bootloaders.
Click to expand...
Click to collapse
Thank You very much I was able to install the Safe strap Recovery and am now backing it up. Hopefully my last question Is there a way to update in the future for example if I wanted to have the OTA firmwares from AT&T without root in case I were to sell the phone?
Thank you guys for the answers.
xtremegamer13 said:
Thank You very much I was able to install the Safe strap Recovery and am now backing it up. Hopefully my last question Is there a way to update in the future for example if I wanted to have the OTA firmwares from AT&T without root in case I were to sell the phone?
Thank you guys for the answers.
Click to expand...
Click to collapse
Odin back to stock
OPOfreak said:
Odin back to stock
Click to expand...
Click to collapse
I've tried this in the past when my phone was stuck in bootloop, But it always failed since I have a different baseband or boatloader. Would you know which stock ROM I have to use because I tried many and had no luck in the past?
xtremegamer13 said:
I've tried this in the past when my phone was stuck in bootloop, But it always failed since I have a different baseband or boatloader. Would you know which stock ROM I have to use because I tried many and had no luck in the past?
Click to expand...
Click to collapse
Read here links are still working
http://forum.xda-developers.com/showthread.php?t=2868776
OPOfreak said:
Read here links are still working
http://forum.xda-developers.com/showthread.php?t=2868776
Click to expand...
Click to collapse
Wait, the thread is for Galaxy s5 Active. Will the G870AUCU1ANE4_Full_Odin.tar file work on my Galaxy s5 AT&T? Just making sure.
xtremegamer13 said:
Wait, the thread is for Galaxy s5 Active. Will the G870AUCU1ANE4_Full_Odin.tar file work on my Galaxy s5 AT&T? Just making sure.
Click to expand...
Click to collapse
No my bad
Here
http://forum.xda-developers.com/showthread.php?t=2862299

Galaxy Tab s2 boot loop

I have done this http://forum.xda-developers.com/tab-s2/development/root-cf-autoroot-tab-s2-sm-t3187202 to root my device it all passes and after restart it will not stop looping, Help please?
are you able to get into download mode by holding power + down volume + home button for 10 seconds or until it goes into the mode? If so you can easily use SmartSwitch to reinitialize the firmware, it will download and flash it. http://www.samsung.com/us/smart-switch/
You will need to install Smart Switch and hit emergency software recovery and initialization under the more button in the top right. Your device will likely not be shown in it's current state so you will need to type your specific model number (example "SM-T710") without quotes, you will be asked for your serial number as well, so get the number from the sticker that was on your tablet or the tablet box/product packaging.
You WILL need an internet connection, the program should provide any steps and has a built in guide should anything not be clear in this post. Please be aware that if you did not make a backup you will lose your data. I am not experienced enough to know if there is another way around this but at this point and time I doubt it.
Smart Switch is a fantastic app, it recovered my device when EVERYTHING was destroyed save for the download mode.
Let us know if it works for you!
Nice, mine is the smt810 and I'll do this once I get home in a few hours and let you know how it goes . Thanks
It clearly states you need to flash the permissive kernel before rooting or you will boot loop.
Ok thanks wirelesskebab it worked and ashyx how do you flash it and will it even work? i dont want to brick a 400$ tab lol
Seems I am also in in similar boat. I was going back to stock and the cable became loose and I have a bad flash. I can access download mode but have lost TWRP and root. Problem is odin fails to flash original firmware and smart switch for pc seems to hang at 0% after downloading software. Is there any way to force odin?
triniboy said:
Seems I am also in in similar boat. I was going back to stock and the cable became loose and I have a bad flash. I can access download mode but have lost TWRP and root. Problem is odin fails to flash original firmware and smart switch for pc seems to hang at 0% after downloading software. Is there any way to force odin?
Click to expand...
Click to collapse
How long did you leave smart switch to attempt an initialization? 30 minutes? You may try using smart switch on another computer and giving it a go. Another thing you might try is if the cable is damaged swapping it out.
I can't really say beyond that. I will say that Kies and Smart Switch froze on my PC and I ended up moving to another desktop to get the job done and uninstalling/reinstalling. Make sure to copy your backups though as uninstalling removes them too.
If you are still experiencing issues then unfortunately it is beyond my limited experience. Hope this helps.
Thatguy_1 said:
Ok thanks wirelesskebab it worked and ashyx how do you flash it and will it even work? i dont want to brick a 400$ tab lol
Click to expand...
Click to collapse
I think that it's better to install TWRP and from inside TWRP click install and load the latest SuperSU from a directory before hand from www.chainfire.eu. That's how I root my tablet. I was using permissive kernel and auto-root but it's not necissary. I can't speak for any benefit or lack thereof.
wirelesskebab said:
How long did you leave smart switch to attempt an initialization? 30 minutes? You may try using smart switch on another computer and giving it a go. Another thing you might try is if the cable is damaged swapping it out.
I can't really say beyond that. I will say that Kies and Smart Switch froze on my PC and I ended up moving to another desktop to get the job done and uninstalling/reinstalling. Make sure to copy your backups though as uninstalling removes them too.
If you are still experiencing issues then unfortunately it is beyond my limited experience. Hope this helps.
I think that it's better to install TWRP and from inside TWRP click install and load the latest SuperSU from a directory before hand from www.chainfire.eu. That's how I root my tablet. I was using permissive kernel and auto-root but it's not necissary. I can't speak for any benefit or lack thereof.
Click to expand...
Click to collapse
I left smart switch on till I got a try again message odd.. I was wondering why odin and original firmware cant save my bacon at this point?
Thatguy_1 said:
Nice, mine is the smt810 and I'll do this once I get home in a few hours and let you know how it goes . Thanks
Click to expand...
Click to collapse
triniboy said:
I left smart switch on till I got a try again message odd.. I was wondering why odin and original firmware cant save my bacon at this point?[/QUOTo
ok laptop worked.. huge relief back to 5.02
Click to expand...
Click to collapse
Thatguy_1 said:
Ok thanks wirelesskebab it worked and ashyx how do you flash it and will it even work? i dont want to brick a 400$ tab lol
Click to expand...
Click to collapse
Of course it will work, but it's for 5.1.1 and 6.0 devices.
Just read the related thread.
Although I can't understand why you boot looped on 5.0.2 as it doesn't require a modification to the boot.img.
As suggested I advise you root with supersu 2.65 via twrp.

Categories

Resources