Related
If you want to add to any of these lists, reply with your suggestion.
Handy cool random features:
- If you flip over the TD when someone is calling, it mutes itself (but does not reject the call).
- The stylus is held in magnetically (it gets sucked into its slot if you start putting it in).
- When you take out the stylus during a phone call, it starts up the note application.
- When you take out the stylus while the device is off, it turns the device on.
The buttons below the screen are real buttons and touch sensitive. This is capacitive Touch sensitivity, so it can sense the proximity of skin and, for example, focus the camera in preperation for the taking of a photograph.
- The circular thing on the front has fancy LEDs that flash in different patterns when different things happen (e.g. new message).
- The charger itself is a USB socket, and a mirror black finish, once plugged in a small HTC logo glows white to indicate it is on.
- The video recording at VGA is smooth, and clear outdoors with the autofocus working really well. It records in MPEG4 and H.263 with a 2 second, 10 second or unlimited record time.
- The Camera can turn business cards into a contact.
- The backlight also auto adjusts with the light sensor located in the earpiece.
- The case is lined with a microfibre-style material that will clean both sides of the handset whenever it’s put in and taken out.
- There is toughened glass between the touch surface and the LCD screen, meaning it's pretty hard to break.
Contents of the box
- HTC Touch Diamond (with stylus).
- Diamond-style power adapter.
- Diamond-style Headphones (with fluffy bits, and a builti-in microphone and FM antenna).
- Diamond-style USB cable.
- Screen protector.
- Spare stylus.
- Getting started CD.
- Application CD.
- HTC Care leaflet.
- Quick start guide booklet.
- Accessories booklet.
- Another random booklet.
- Warranty card.
dont understand first feature..
if the phone is ringing on yoru desk for instance and you turn it over, it will stop the ringing but not ignore the call. So based on your microfibre comment we can assume this comes with a case? Good post by the way.
the unboxing of a release device, not pre production, on slashgear shows no microfibre case.
mark please edit your post to be factual. [it says about the case in random features, but not in whats in the box]
or make this wiki, it seems more suited to wiki if the diamond has a wiki yet
Rory
rorydaredkign said:
the unboxing of a release device, not pre production, on slashgear shows no microfibre case.
mark please edit your post to be factual. [it says about the case in random features, but not in whats in the box]
Click to expand...
Click to collapse
Like you said, the case doesn't appear to be in the box. However, it's still a random handy Touch-Diamond-related-feature.
I see you have not got in there that the stylus is held in magnetically, and that it gets sucked into the slot automatically when placed inside.
Surur
Indeed, I have not. I shall add it.
I'm always slightly wary of magnetic styli though...
Plays music and does the "BUMP"
I always wanted to modify original case from HTC HD2 (one from original package) because even if I like it very muck it has some flows:
- When somebody is calling me I must struggle to take the phone out without answering by mistake on that call.
- When I wanted to check what time it is, it was faster to ask somebody else instead of taking my phone from my pocket in this winter cold (-200 C)
- Because of low temperature I have to keep my phone inside mi jacket to have normal battery life but my clothes don't have inside pockets because if you open the jacket will get cold inside. Because of this I have to make that case hang on my neck, very close by it to allow me to have access to it without opening to much of my jacket zip.
- I was thinking to make a hole in the back of case to be able to use flash light from back of device like a torch (With TorchButton thancks xda-develover) because now in winter when is dark big part of afternoon and I find myself using this feature very often.
- I needed protection for my phone because now even if I love this devices I am a very careless owner and scratches and droppings are a question of "when" rater that "if" I drop down or scratch my expensive device.
So i star from thinking of making of two holes in original case of device one in the front for screen and one in the back for light. But then I thought if I make a mistake I will ruin this case wick is quite expensive to buy again. And because of this I stat to make a completely new one.
And here is the result of that work:
Please ignore bad finishing on some parts but this is a "prototype" and I never done this before but i may stick with it because I am very happy with it (very practical).
Advantages:
- Protection against scratches.
- Protection against droppings of device on some hard surfaces (corner are the Achilles heel for his device because of glass surface). Bottom corners have a wicker protection like the top ones.
- Possibility to hang the device in a lot of places because of that clipping system.
- Clip is placed in the right position on the bottom of device not in the top like normal manufacturers do. In this way when you have the device hanging on neck or belt loop and you lift the device to see the screen you don't need to turn it upside down (I don't need for others to see correct position of the screen but to see it myself). Also is more comfortable when you have the phone near your ear for a conversation.
- I make this case very tide on my phone and now I keep it without battery cover an I can make a soft reset any time thru the case with that little red reset button without straggling to remove the phone from the case or remove (again struggling) the battery cover. Plus now device is locking almost as slick like it was looking naked.
- I didn't make a hole were the light sensor is and is locking like this is affecting responsivity of auto light on the device but my battery now it seems to last more so I consider this an advantage. Proximity sensor is working fine in phone kavas.
- Unrestricted access to all functions of the device without need to remove it from the case. Exceptions MicroSD card, battery and SIM but this ones I never touch them on my previous device (HTC HD) in a year of use.
- Some kind of organic feeling on touching this device now because of soft leather imitation, very pleasant.(I don't want natural leather).
- Almost free. Concept and cutting of material is made by me and sowing by my wife. Materials I have fond some lying around in my house from some project of my wife.
Disadvantages:
- Transparent plastic protecting the screen is making a lot of bubbles when it sticks against it, making the screen to look ugly when is turned off (see pictures). I am thinking to a solution now (suggestions appreciated).
- Hole for front speaker absent (will be made soon)
This is not a commercial project I made this case for myself and I will like to hear from you any comment or suggestions.
P.S. Sorry for my English is not my firs language and on school it wasn't my strong point.
Well done! it is a pretty impressive effort, though I am not 100% convinced about leaving the battery cover off all the time. Still youve done a great job
I can put battery cover back any time but you know that problem when this phone is refusing to go on? In this situation I just reset it with a pencil thru "leader" of case. Otherwise is an entire ritual do get the phone out and I need a plastic object to remove the cover (no fingers nails). So you get furious because you thought you have a working phone but in reality is a dead phone for God knows how long and now you must perform evisceration ritual. Not for me I just use one of my small key to pres reset button, think something about their mothers (of HTC guys) a move along hoping nobody was calling me in this time.
well done, great satisfaction when doing your own thing....... UNIQUE
Great job even for a prototype.
power button: Too recessed and flat, to the point where I now have to use my fingernail to power on the device.
volume button: Flimsy to the point where I can literally slide it up and down. I can also hear it jingle when the device vibrates.
Backcover Flimsy, moves around too much and is never tightly secured.
hardware: When I unplug my device from the charger and the screen is getting ready to time out, it flashes green, then times out... (this looks like it's going to create bigger issues down the road)
Power button: 1 in 20 HD7's I have exhibited the behavior you mention. It went away however. I would advise against using your fingernails if at all possible.
Volume Button: Again, 1 in 20 have this, and unfortunately it's the one I carry around. Two other HD7's I personally used did not have this.
I'd try to get it replaced if I were you.
I'm 2 for 2 on the first two annoyances (power and volume button).
I'm getting it replaced again (for the third time) tomorrow morning. I've also noticed these problems with the store models at various T-Mobile stores.
If I have the same problem with my third device, I'm returning it and getting my refund. Omnia 7, here I come.
Hmmm... I don't care much for the power button placement, but I haven't seen any of the other things you mentioned.
jimbonics said:
Power button: 1 in 20 HD7's I have exhibited the behavior you mention. It went away however. I would advise against using your fingernails if at all possible.
Volume Button: Again, 1 in 20 have this, and unfortunately it's the one I carry around. Two other HD7's I personally used did not have this.
I'd try to get it replaced if I were you.
Click to expand...
Click to collapse
regarding issue #1, how did the problem go away? did some mechanism inside shift causing the power button to pop out more? just wondering?
i also have the loose battery cover. very annoying.
also about the screen... havent seen this mentioned before. i have a slight gap at the left and right edges of the screen where it meets the chrome-ish border. its pretty easy for particles to get stuck in there. compared to the hd2, this gap is pretty noticeable.
I thought I was the only one with these issues lol, figured the recessed power button was just a design oversight
@jimbonics: just wondering, but why do you advise against using your fingernail?
Sent from my T-Mobile G2 using XDA App
jimbonics said:
Power button: 1 in 20 HD7
Volume Button: Again, 1 in 20 have this
Click to expand...
Click to collapse
Seriously? I checked a batch of HD7 in malaysia, and exceptionally, all of them had this issue. You're just so lucky you dont have it
daaango said:
why do you advise against using your fingernail?
Click to expand...
Click to collapse
Maybe because of this ?
Thanks Shu and daaango.
I knew I wasn't crazy in thinking this was an issue only I was experiencing.
I've also read several phone reviews, and a lot of the reviewers mentioned about the power button being recessed and stating frustration waking up the device.
I don't know how HTC can fluff up something so important. I mean, what good is a product if you can't power it on; wake it up? One would think they would put emphasis on having a solid foundation on the power button.
Melcali: Yeah, on one phone the power button managed to become flushed, to the point the user had to use their fingernail (even though i found it easy to turn on with the flat of my finger, almost like it was capacitive). However, next day it had 'popped out' a bit and had become less recessed and hasn't been a problem for him since.
daango: In addition to what Shu posted, using your fingernail is likely going to cause you to press the button in harder than it needs to be, which would likely cause the button to be crammed in more and more over time. If it can't be prevented, it can't, I'm just advising against it.
I've got two unopened spares. I'm going to crack them open and see if the volume button jiggles.
Ah, thanks shu and jimbonics for explaining that
Honestly, I don't think it can be helped. Maybe my fingers are too round or something, but using my fingernail seems like the only option right now. I might try adding layers of tape on the button so its easier to press but idk yet... it might take away from the aesthetics
Sent from my T-Mobile G2 using XDA App
All five units I've come across so far -- my defective original (corrupted memory), my current one, a second defective one (also corrupted memory), its replacement, and an in-store demo phone -- have the same issues:
Recessed power button
Very difficult to press camera button (basically useless)
Loose volume rocker (the case opening is about 0.8 mm too long for the rocker, so it moves around)
Imperfect battery cover fit (the plastic cover flexes from the opening process, so usually doesn't fit perfectly)
Weak screen support in bottom-right (press a bit on the search key and you'll see waves on the LCD)
On the two that I've had long enough to use, the clear coat on the kickstand is flaking off, and the Windows Phone logo, which was barely visible to begin with, has almost completely faded away on one of them.
Kind of sad that HTC screwed up so badly given that the HD7 is a barely-modified HD2, which was among the best-built phones on the market.
amb9800 said:
All five units I've come across so far -- my defective original (corrupted memory), my current one, a second defective one (also corrupted memory), its replacement, and an in-store demo phone -- have the same issues:
Recessed power button
Very difficult to press camera button (basically useless)
Loose volume rocker (the case opening is about 0.8 mm too long for the rocker, so it moves around)
Imperfect battery cover fit (the plastic cover flexes from the opening process, so usually doesn't fit perfectly)
Weak screen support in bottom-right (press a bit on the search key and you'll see waves on the LCD)
On the two that I've had long enough to use, the clear coat on the kickstand is flaking off, and the Windows Phone logo, which was barely visible to begin with, has almost completely faded away on one of them.
Kind of sad that HTC screwed up so badly given that the HD7 is a barely-modified HD2, which was among the best-built phones on the market.
Click to expand...
Click to collapse
wow, you have had a lot of problems. I'm still on my original hd7 since second week of november.
1. power button is slightly recessed, but no problems pushing it with my finger (not nail)
2. camera button does have some orange on it, but it functions properly.
3. volume buttons work fine, maybe a little slide to the rocker, but doesn't effect controls
4. no flaking of clearcoat, no wp7 logo coming off, no lcd discoloration no matter how hard I press on the search or back buttons.
5. Back cover fits properly. I haven't had much reason to pull it off after initial placement of sim card, thanks to phone not constantly freezing. There is a slight gap where the back cover meets the smaller cover.
What are you subjecting your phones to???
I agree the hd7 build quality might not be iphone, but it's holding up well for me. It's not like we have a lot of choices on t-mobile, the dvp has way more problems at this point.
amb9800 speaks the truth. I went through 3 different units that had defects to varying degrees. I had similar issues with the EVO as well. HTC are notorious for shoddy craftsmanship.
I have the same problems they started AFTER my 30 days .. So i havent tryed to go and change at my local T-Mobile!! Is there any loop in the contract or something that would let me change it for anither phone and pay difference/get a refund xD
have the same problems as the op
So...I just replaced the touch screen digitizer on a friend's Bionic. Unfortunately, somewhere during the process, we lost the power/sleep switch that fits on the top of the phone frame. Everything else works fine, and the device can be powered on or woken up by using anything thin enough to fit in where the power switch would be and hit the button. But obviously this is not a feasible option for using the phone on a day-to-day basis.
Other than purchasing a replacement switch, which looks like that may not be too easy to find, does anyone have any suggestions on making a makeshift switch to use? Something that could be installed on the frame so he can power on the phone and wake it up without using a pen/clip/etc.?
Thanks!!
Is this what you are looking for?
http://www.cellulardr.com/verizon-d...-android-motorola-xt875-top-power-button.html
Thank you, yes that is the part. But it'll take quite a while to ship to my location. Does anybody have any suggestions for jury-rigging the power button for the time being? I was thinking a small piece of metal of some kind perhaps?
Thanks!
Hi, I dropped my phone by accident and unfortunately, it fell on the volume key which is now bend in the middle and stuck pushing vol up.
I can push volume down but the key is stuck with volume up and the phone would do that at random. For example, at some point during a call it would go to maximum volume automatically, which is super annoying.
Does anyone have experience with replacing hardware parts of the Zenfone 8? I watched this tear down video , it looks kind of easy to disassemble. However I am not sure if I can reach the volume key without removing the main board. Also, not sure if will be water proof after reassembling (guess not, but no problem).
Any tips? Thanks everyone!
I tried searching a bit but couldn't find any Zenfone 8 buttons (though maybe buttons from other phones could work). What I found instead is a complete frame that does come with the buttons attached to it, so you could either transfer the whole phone internals to it, or try removing the button to put inside your original casing. (I think the second option would be easier since the battery is glued down pretty solidly)
Anyways, here is the link: https://www.aliexpress.com/item/1005003661617745.html
I think it will not be water proof after you open it, so you should also consider getting a new seal. (Consider that I have never openned my zf8 lol so I am not pro). But from what it looks like, it will most likely be easier and safer for the board to remove it before playing on the side and risking slipping and scratching the pcb
EDIT: I found the specific volume key on asus-accessories.com for 12$!!
Thanks for your help! I already found and ordered the spare part on https://www.fixshop-online.de/ I hope that 24 Euros are not wasted.
Hopefully, the whole open and repair process will not be too difficult.
DerSteppo said:
found and ordered the spare part
Click to expand...
Click to collapse
I would be very interested in the results. Most importantly, if the spare part is a good quality replacement. Also I would be interested in how easy or hard such a replacement is. I looked into many of the teardown videos before buying the device, but those are usually from super-experienced pros with all the fancy tools. I would be interested in a first-hand report, even if it's short.
I will keep you updated. A friend sent some special adhesive tape but it hasn't arrived, so I didn't start disassembling.
The spare part, however, seems to be not available. I received an email that they don't have it. So I wait a little, maybe they can order it, but if it will not arrive end of April, I will just try to fix the bent old one.
@amenthes
I managed to open the phone with a hairdryer. I probably should have applied more heat, but I was hesitant because I did not want to destroy something, so it was a little bit harder to remove the back cover with a plectrum-like tool. Around the rim of the cover is a black adhesive tape, which I completely removed without any traces.
Unfortunately, I received another email that the spare part was not available, so I (not wanting to wait for a month or longer) cancelled the order eventually. Problem was, the volume button is somehow fixed to the case and I could not reach it properly. I managed to push it back a little bit, but could not remove it for replacement. During the process, I damaged the lower volume contact (as I wrote, the part is hard to reach) unfortunately. So now the volume down button does not work at all. However, the volume up button now does not get triggered automatically anymore. So I just push vol+ and lower the volume on the screen or via bluetooth headset. Works for me, as long as it doesn't go max. volume all of a sudden anymore.
A friend gave me some double sided adhesive tape which came with his replacement battery and I cut it with a razor blade to fit the back cover. It does not go all the way around, but I don't want to take the phone into water anyways. Besides, it looks just as it has never been opened. No gap at all, so the opening and closing parts are fairly easy.
All in all, it has been an experience. I will keep the phone despite the broken button, because for me it is still one of the best phones available at the moment.
Thank you for reporting back
@amenthes
Hi, it's been a while but I finally managed to replace the button!
I found a spare part on AliExpress. Not only was it much cheaper than on the other website, it is the whole middle frame instead of the button only. Delivery was expected end of June, however it arrived today (yeah!).
I used a razor blade and a thin needle as lever to remove the new button from the frame, since there seems to be no way from the inside without making things too complicated.
To remove the old button from the phone, which was bent and messed up (I tried to rip it off with a needle-nose pliers, but it did not work and it left some ugly marks), I used a sharp knife instead. I got inspired by this teardown video of another phone which unfortunately I don't remember. In the video, the guy used the knife like he would peel an orange. Like you would try to cut the button from the top edge. If enough pressure is applied you can pull the button out.
Eventually, I inserted the new button and pushed it a few times from different angles and now it feels almost as new. There is a nice click and pressure point. So I consider this a win.
At the end of the day, I did not even have to open the back of the phone with this method, but I learned a few things, which is nice, and, you know, you never know. Also, it gave me some confidence in my technical skills.
DerSteppo said:
@amenthes
I managed to open the phone with a hairdryer. I probably should have applied more heat, but I was hesitant because I did not want to destroy something, so it was a little bit harder to remove the back cover with a plectrum-like tool. Around the rim of the cover is a black adhesive tape, which I completely removed without any traces.
Unfortunately, I received another email that the spare part was not available, so I (not wanting to wait for a month or longer) cancelled the order eventually. Problem was, the volume button is somehow fixed to the case and I could not reach it properly. I managed to push it back a little bit, but could not remove it for replacement. During the process, I damaged the lower volume contact (as I wrote, the part is hard to reach) unfortunately. So now the volume down button does not work at all. However, the volume up button now does not get triggered automatically anymore. So I just push vol+ and lower the volume on the screen or via bluetooth headset. Works for me, as long as it doesn't go max. volume all of a sudden anymore.
A friend gave me some double sided adhesive tape which came with his replacement battery and I cut it with a razor blade to fit the back cover. It does not go all the way around, but I don't want to take the phone into water anyways. Besides, it looks just as it has never been opened. No gap at all, so the opening and closing parts are fairly easy.
All in all, it has been an experience. I will keep the phone despite the broken button, because for me it is still one of the best phones available at the moment.
Click to expand...
Click to collapse
Thanks for sharing your experience. Do you think the waterproofing was tempered by the repair ?
DerSteppo said:
@amenthes
Hi, it's been a while but I finally managed to replace the button!
I found a spare part on AliExpress. Not only was it much cheaper than on the other website, it is the whole middle frame instead of the button only. Delivery was expected end of June, however it arrived today (yeah!).
I used a razor blade and a thin needle as lever to remove the new button from the frame, since there seems to be no way from the inside without making things too complicated.
To remove the old button from the phone, which was bent and messed up (I tried to rip it off with a needle-nose pliers, but it did not work and it left some ugly marks), I used a sharp knife instead. I got inspired by this teardown video of another phone which unfortunately I don't remember. In the video, the guy used the knife like he would peel an orange. Like you would try to cut the button from the top edge. If enough pressure is applied you can pull the button out.
Eventually, I inserted the new button and pushed it a few times from different angles and now it feels almost as new. There is a nice click and pressure point. So I consider this a win.
At the end of the day, I did not even have to open the back of the phone with this method, but I learned a few things, which is nice, and, you know, you never know. Also, it gave me some confidence in my technical skills.
Click to expand...
Click to collapse
Thanks for sharing your experience. Do you think the waterproofing was tempered by the repair?
maxime78 said:
Thanks for sharing your experience. Do you think the waterproofing was tempered by the repair?
Click to expand...
Click to collapse
Probably yes, because I used adhesive tape and cut it myself along the back rim and it is not in one piece going all around. However, the cover sits very tight and you wouldn't even recognize that the phone was ever opened. I don't really mind because I use a silicon phone case anyway and I don't intend to take the phone underwater.
You can buy the original battery cover adhesive spare part here: https://www.asusparts.eu/en/asus-13040-01431000 but I did not want to spend more money and my solution works for me.
DerSteppo said:
@amenthes
Hi, it's been a while but I finally managed to replace the button!
I found a spare part on AliExpress. Not only was it much cheaper than on the other website, it is the whole middle frame instead of the button only. Delivery was expected end of June, however it arrived today (yeah!).
I used a razor blade and a thin needle as lever to remove the new button from the frame, since there seems to be no way from the inside without making things too complicated.
To remove the old button from the phone, which was bent and messed up (I tried to rip it off with a needle-nose pliers, but it did not work and it left some ugly marks), I used a sharp knife instead. I got inspired by this teardown video of another phone which unfortunately I don't remember. In the video, the guy used the knife like he would peel an orange. Like you would try to cut the button from the top edge. If enough pressure is applied you can pull the button out.
Eventually, I inserted the new button and pushed it a few times from different angles and now it feels almost as new. There is a nice click and pressure point. So I consider this a win.
At the end of the day, I did not even have to open the back of the phone with this method, but I learned a few things, which is nice, and, you know, you never know. Also, it gave me some confidence in my technical skills.
Click to expand...
Click to collapse
pulling out a device's button with a knife is like cutting ice cream with axe. You will always end up spoiling it.
Evan Roberts said:
pulling out a device's button with a knife is like cutting ice cream with axe. You will always end up spoiling it.
Click to expand...
Click to collapse
That's what I thought, but it worked surprisingly well actually!
@DerSteppo
Good day, sir. You have literally saved me from feeling extremely sad and even considering taking my phone to repair shop (which I never did in my life).
My story: I was snowboarding some days ago and at one point I fell on the slope on high(ish) speed. It was okay until I took a lift and took a look at my phone. It was almost exactly the same case as yours - the volume key was bent in the middle except it was vol. down which was stuck. Luckily the phone was still usable, I could adjust the volume via sound control panel in the settings which of course felt tedious but still not the end of the world until I get home and figure something out. Unfortunately while messing with the buttons now it was turn for vol. up to be pushed and there was no way to turn the phone on because it triggered the boot mode which wont let you out I came across that very video you mentioned and was baffled at why they made it so that you literally cant get the button from the frame without surely f**king something up in the process I started feeling anxious and thankfully google showed me this thread. All in all, I took your advice with a knife and managed to pry the buttons off a little and thankfully both buttons got released from their respective contact panels. So again, thank you so much man, don't think I could figure this out by myself
One question though. Not sure yet whether to get a new button instead of now scratched and still bent one, but was there any difficulty to insert the new button into the frame? There are two little 90 deg. angled metal things on each side and I am not sure if they can affect the insertion process.
Asus Zenfone 8 ZS590KS - Volume Button (Obsidian Black) - 13020-06381400 Genuine Service Pack | FixShop
Replacement volume button for Asus Zenfone 8 ZS590KS. Use the button if the original button has stopped working or is damaged and needs to be replace…
www.fixshop.eu
fluXion69 said:
@DerSteppo
Good day, sir. You have literally saved me from feeling extremely sad and even considering taking my phone to repair shop (which I never did in my life).
My story: I was snowboarding some days ago and at one point I fell on the slope on high(ish) speed. It was okay until I took a lift and took a look at my phone. It was almost exactly the same case as yours - the volume key was bent in the middle except it was vol. down which was stuck. Luckily the phone was still usable, I could adjust the volume via sound control panel in the settings which of course felt tedious but still not the end of the world until I get home and figure something out. Unfortunately while messing with the buttons now it was turn for vol. up to be pushed and there was no way to turn the phone on because it triggered the boot mode which wont let you out I came across that very video you mentioned and was baffled at why they made it so that you literally cant get the button from the frame without surely f**king something up in the process I started feeling anxious and thankfully google showed me this thread. All in all, I took your advice with a knife and managed to pry the buttons off a little and thankfully both buttons got released from their respective contact panels. So again, thank you so much man, don't think I could figure this out by myself
One question though. Not sure yet whether to get a new button instead of now scratched and still bent one, but was there any difficulty to insert the new button into the frame? There are two little 90 deg. angled metal things on each side and I am not sure if they can affect the insertion process.
Asus Zenfone 8 ZS590KS - Volume Button (Obsidian Black) - 13020-06381400 Genuine Service Pack | FixShop
Replacement volume button for Asus Zenfone 8 ZS590KS. Use the button if the original button has stopped working or is damaged and needs to be replace…
www.fixshop.eu
Click to expand...
Click to collapse
Hi, I am so happy to read I could help with my experience! Nice to see that you where able to fix it for now.
I did not have problems with inserting the new button, no. With the phone switched of, I just pushed it in and pressed a bit harder on both ends a few times. I think it "clicked" in at some point.
It is still working as new! One advice though: you might want to consider buying the original adhesive tape that is shaped to fit properly. I used just a few stripes and cut it to fit almost all the way around, but a few months ago I saw that the back cover was slightly lifted and there is a gap. The phone survived a few drops from various heights in the meantime, so I am not surprised. I am too lazy to re-apply new tape, though. It's in the rubber case anyways.
All the best!