hi there i have htc hd7 and i did convert my bootloader from v5.11 to v1.16 then i use DFT application to convert my bootloader to RSPL then to HSPL all done here.but when i try to clean the S58 data after pressing twice in power buttom the phone restarted at once nothing happend!!!! it shuld show somthing abut cleaning or waite right? i repeat that offcurse using the Y cable .so whats the wrong here why i cant clean the s58 data....by the way i was trying that becasue i have a problem with totall storage is only 11.28 MB and low storage message!!! i have Schubert htc hd7 t9292 29100. any help here to make s58 data be cleard as normal and as evry body don it???????????
is it a hardwear problem????or OS problem?
please any body replay!! where is the professional guys here???!!
Related
Hi.
today i bricked my kaiser when i tried to install a dutty's rom
been trying to get this fixxed for over 5 hours. nothing worked out.
used kaisdiag.nbh from h ttp://forum.xda-developers.com/showthread.php?t=420683
in both suggested solutions my kaiser wont go further then the Loading page. ( waited atleast 10 mins twice without any success)
used some other RUU installs while in the tricolour screen:
ahmedfikry wm6.5 23549 Tilt UC light rom
KAISER_WM65_OS23547_PP12MB_Sonblack05
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
RUU_Kaiser_HTC_WWE_3.02.405.0_radio_sign_25.70.30.05_1.58.26.20
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_64.08.21_CubeV2_ <== the one wich bricked my phone
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_65.14.06_No_CubeV2_
RUU_Kaiser_TMO_UK_3.31.110.3_radio_sign_25.83.40.02_1.70.18.02_Ship
some other topic sugested to use MTTY.
but that probram says: usb port cannot open.
long story short: im desperate.
can any of u please help me fix my phone ?
its an MDA vario II. model Kais130 P/N 99hcy063-00
thanks in advance.
i'm no expert at recovering bricked phones...
but what i understand is that IF you have a hard SPL (which hard SPL do you have?), then you should be able to recover your device from nearly any situation.
try this...if RUU is not working well, try to flash using the SD card method.
also, try to flash a stock ROM (using RUU as well as using the SD card method). let us know what happens.
Try putting your phone into bootloader, ( press and hold power and camera buttons while doing a soft reset ) once it is in the " tri-color " screen, let us know what it says on the screen.
thanks for your time and the fast response, to both of you.
@#1
i used Pofs hard spl.
and as mentioned above i tried both the RUU way and with my micro SD card.
the SD way only shows me the 'Loading' screen. over and over.
and with the RUU i get several errors. connection errors at 0% and connection errors some later.
some roms just say they wont work on my phone.
and others just reboot my phone.
@#2
i think my phone gets to the bootloader all the time. cause i c no difference when resetting with camera and power button on.
its the tri color screen with the folowing information that shows up:
RUUNBH
Kais130
SPL-1.56.0000
CPLD-8
serial/USB
______________________
the serial shows up when the phone is not connected.. and the USB shows up when its attached to my pc with usb.
Any other suggestions ?
Thanks in advance .
You don't have hard-spl you still have a stock, flash the stock ROM of your carrier from bootloader.
Then follow the noobs guide to flashing.
Thx guys my phone is working like it used to be.
downoaded the original rom from t-mobile again. and again.
now got one wich is working.
thanks for your help.
i was about to throw the brick trough the window.
i installed 3 new roms on my HTC (wm6.1, wm6.5(english), and wm6.5 portuguese).
Everything was doing fine, until i was uodating to wm6.5 (portuguese) and is stopped updating at 1% of instalation, i restarted my HTC, and connected to pc and run the RUU again, this time it went till 3% and then the phone just restart and i get stuck on the HTC screen. i can't inicate the Operating System, and when i try now to run de RUU from the tricolor screen, it just stops at 1 %. HELP
WHAT DO I DO ?????????????????????
I'm really desperate, i don't think it has a solution, but plz help me, i don't want to lose my trinity this way
by the way i took off the SIM and the memory card.
Mine fell over in the middle of upgrading, and looked like it was screwed.
With nothing to lose, I decided to to a hard reset.
you know the one - 2 buttons above red & green at
the same time as the reset button.
That did actually work, worth a try perhaps?
good luck with the new paperweight
mike_55 said:
i installed 3 new roms on my HTC (wm6.1, wm6.5(english), and wm6.5 portuguese).
Everything was doing fine, until i was uodating to wm6.5 (portuguese) and is stopped updating at 1% of instalation, i restarted my HTC, and connected to pc and run the RUU again, this time it went till 3% and then the phone just restart and i get stuck on the HTC screen. i can't inicate the Operating System, and when i try now to run de RUU from the tricolor screen, it just stops at 1 %. HELP
WHAT DO I DO ?????????????????????
I'm really desperate, i don't think it has a solution, but plz help me, i don't want to lose my trinity this way
by the way i took off the SIM and the memory card.
Click to expand...
Click to collapse
flush to original rom than update agine..it worked 4 me
hi
i have htc touch diamond. when i try to flash my rom the rainbow screen apears, and after that, everything blocks on 0%. Windows said it is some connection error,and i must restar my phone. Everything works, but i wan't to change the rom.
I also tried to change it from internal storage (with .nbh file), it blocks when screen comes to loading.
Can someone help me ? :S
Did you untick USB fast sync on the phone before trying to flash?
i don't know. My phone didn't asked about that. Can you tell me how to do it ?
sounds like you haven't unlocked the phone.
you MUST install HSPL before any custom rom
Thank you man!
I never heard about HSPL!
Now everything is fine.
Thank ya!
HI ALL, i have a problem whit my xperia , it has spl 0.87 end i cant hardspl it. Some help plz? i try manual spl, hard spl but nothing worcks. PLZ HELP!!!
Moved to Q&A as not Rom Dev.
Are you sure you are connected correctly, EG, ActiveSync or WDDM connected, phone charged to 50% +? usally H-SPL works, what errors are you getting?
Thanks
yes, i do it befor on anader xperia but on this on dont worck, is brend new one! if i try to do it from pc the xperia enter boot loder end the loding bar apear but nothing hapen i let hem about 30 minutes end steel loding bar! on sd card enter boot loder spl 0.52 apeer but after same problem ! what is the problem a new type of spl from sony? or what?
Conection is ok i try to upgrade the firmware from sony it worck end i use the RUU whit an original firmware end it worck!
I found the problem if you have spl 0.87... the hard spl by usb dont worck but you cand do this: find a card 1-2 gb (i try 8 end 16 gb dont worck i dont know why). Format the card end put only manual spl on it end the image of hard spl from hard spl but renam it Kovsimg.mbh. Then run spl manual, the phone will restart end start in bootloder after theat the image will start too loading after the phone loade end update the spl phone will restart (on the phone restart take out the card) if you dont take the card the proces will repet it sealf.For me it worck this way!!!(after theat update your firmware whit what you want, good luck!!!
Great
Thread closed as you solved your problem
Badwolve1
I tryed to install Android on my HtC kaiser, i updated radio etc etc, at the end when i restarted my device for starting installation in that "linux bootloader" it says errorno 2, i dont care about that, i care that after i restarted again i got same error, wich means i cant boot my windows back on and my kaiser is ****ed up, i need any kinda help pls, tnx.
im desperate....
Reinstall back wm to your device if you have HardSPL and try use HaRET. I believe it's your .IMG or reformat back your card.