Related
How do I delete this post?!
* UPDATE: Either I'm just really tired or I am going blind. I fixed my problem, but now I cant seem to be able to find a way to delete this post...
I got my Cingular 8125 about a week ago, it's been a dream! I LOVE THIS THING!
Tonight I decided to update the ROM. I got it with 1.8 or something really old like that so I thought updating would be a good idea. I went to the HTC site an downloaded the latest ROM (2.25).
As I am a mac user, I fired up the old PC and updated. But before I did, I installed SPB Backup on the 8125 and backed everything up to my miniSD. Update went fine. Worked like a charm. I went to restore my files and thats where it all went to hell!!!
I made the mistake of restoring ALL of my files and settings. It seemed fine when it was done. the 8125 asked for my password, and as I finished typing it in, the 8125 rebooted without notice. The Cingular screen came up, loaded fine. Then the Windows Pocket PC screen came up and then the top bar with icons came up. That was it. Now it just sits there, nothing else loads. I can put it on stand by. But nothing else happens. No today screen, no phone, no signal, nothing.
I tried to connect it back to my PC but ActiveSync cant mount it. I tried the Wizard ROM update installer, but it said that the device couldn't be found. I tried connecting it to my Mac with Missing Sync. It asked for a password, which it has never done before (which seemed promising) but after I typed it in, again, no device was found.
Now the poor thing is just sitting there on my desk
Is there anything I can do to get it up and running again? Is there a way I can get one of my machines to recognize it and wipe it clean so I can start fresh???
Please help! I bought this phone refurbished, so I dont know if I will be able to get it replaced. Any help would be greatly appreciated!!!
Was this device CID unlocked? Did you try going to the bootloader mode (Hold camera down and press reset while holding camera button, rainbow screen should appear) and then flashing it with your desire ROM?
If it still don't work, you might need an SD backup image of a rom. I've been trying to look for one but the only think I found is an image of a dutch language ROM. If I do get one I'll give you a PM.
Clem
clemsyn said:
Was this device CID unlocked? Did you try going to the bootloader mode (Hold camera down and press reset while holding camera button, rainbow screen should appear) and then flashing it with your desire ROM?
If it still don't work, you might need an SD backup image of a rom. I've been trying to look for one but the only think I found is an image of a dutch language ROM. If I do get one I'll give you a PM.
Clem
Click to expand...
Click to collapse
Hey thanks Clem! I did solve my problem, but now I have a new one. I HATE 2.25!!!
So if you do get your hands on an older ROM, I would be forever greatful!
Thanks for responding!
Here is the link for the 1.8 Cingular ROM
ftp://xda:[email protected]/Wizard/Roms/Cingular/Cingular_RUU_1.8.11.1.WWE.ship.exe
I hope this works for you.
You think you can save that 2.25 image to your SD card coz I've been looking for an SD image this is ths instructions...that is if you don't mind.
ftp://xda:[email protected]/Wizard/DumpROM/How_to_DumpROM.txt
and here are the files needed
ftp://xda:[email protected]/Wizard/DumpROM/ntrw_189.exe
ftp://xda:[email protected]/Wizard/DumpROM/psdread.exe
ftp://xda:[email protected]/Wizard/DumpROM/romupdate_115.exe
This will also create you a backup of 2.25.
Thanks
clemsyn said:
Here is the link for the 1.8 Cingular ROM
ftp://xda:[email protected]/Wizard/Roms/Cingular/Cingular_RUU_1.8.11.1.WWE.ship.exe
I hope this works for you.
You think you can save that 2.25 image to your SD card coz I've been looking for an SD image this is ths instructions...that is if you don't mind.
ftp://xda:[email protected]/Wizard/DumpROM/How_to_DumpROM.txt
and here are the files needed
ftp://xda:[email protected]/Wizard/DumpROM/ntrw_189.exe
ftp://xda:[email protected]/Wizard/DumpROM/psdread.exe
ftp://xda:[email protected]/Wizard/DumpROM/romupdate_115.exe
This will also create you a backup of 2.25.
Thanks
Click to expand...
Click to collapse
THANKS CLEMSYN! I'll give them a try! YOU ROCK!
I forgot to put the DIAMING.nbh file on my diamond! now it just shows up with "Touch Diamond" and then resets! i need help please
is this an easy fix??
Thank you so much!
go to bootloader (vol down + reset) and flash new rom from romupdater in windows
i got to bootloader but it won't read my usb... there is no DIAMING.nhb file (or whatever it is called) on my phone.. is there any application that will let me get the usb to work.. any ideas???
thank you
i can still run the custom RUU, and it runs on my phone as well.. so is there anyway.. or is there already one out there that has the DIAMIMG.nbh with it so that it installs without the need to manually move the file to the phone..
thanks again
Yes it does, if u get into bootloader, connect your phone to PC, you should see written USB in bootloader a then run RUU from windows, it should work. I experienced similar problem and that was my solution
i tried to flash a different rom onto my diamond, and it got 100% done.. but still... i wasn't able to move the DIAMIMG.nbh file to my root... do i need to use a rom that doesn't have a DIAMIMG.nbh file? where would i find one.. if i may ask?
your help is appreciated thank you
UPDATE
ok... so i found, and downloaded 2 RUU roms. one of them got to 90% done, and the other got to 91% done... does anyone know why this is..? these are the official roms, (I think).
i have searched for the past 2 days almost nonstop, i need a rom that will fully install onto my phone. This rom can't have me move the DIAMIMG.nbh file over manually either, because i cannot do this in bootloader mode.
i tried these 2 official roms. _HTC Touch Diamond_QMR_RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe
and this one,
RUU_Diamond_HTC_Europe_1.35.401.3_Radio_Signed_Diamond_52.26.25.09_0.93.25.26_Ship.exe
do you know where i could download some other roms at? thanks
did you use Hard-SPL? maybe something with spl theres wrong
When flashing from your PC, you don't move an NBH over.
Go to htc.com, support, and download the current rom for your phone.
Soft reset holding volume down
Connect to your PC (DIRECTLY and NOT through a hub)
Run the updater you just downloaded from HTC
ya. i'm using hard-spl..
i tried getting a rom from htc, but i don't think that it's recognizing my s/n.. could i borrow someone elses??
i'm connecting my phone to a USB that's located in the back of my computer... i don't think it's a hub, but i'll try a different port maybe..
thank you again
so here's the full story.
i tried to install a rom.. it was shaks v3. and this was the rom. -> 2.03.401.2
i didn't put the diamimg.nbh file on it before i flashed it.
the RUU ran fine, but afterwards it was stuck just saying "touch diamond" , and it was resetting itself constantly.
i got into bootloader mode, and noticed that i could not transfer files from my computer to phone through that..
so i downloaded a rom that didn't require you to move the .nbh file over manually. it got to 90% , and then stopped i tried another, and it got to 91% and stopped, i tried another, it got to 89% and stopped, and i tried one more that got to 19% and stopped. i have tried using these RUU's on different computer's to install also..
IS there any way to move files using the bootloader mode? i know that the computer recognizes it, but not as a device with removable storage..
I'm starting to lose hope with my phone, and any help will be greatly appreciated
i don't know if it makes a difference, but i got my phone from Sprint.
ok!!! i totally just remembered that roms were made for CDMA users (Sprint verizon vodafone... ME) and GSM users... i was trying to flash a GSM rom onto my phone...
make sure that you know what type of rom to flash.. there are CDMA roms out there.. you just have to search...
thank you Felipe404, for your quick replies, and you made this easier for me.
thanks to JonInAtl for the precise reply...
both of your guy's help made a huge difference, that you don't even know.
WHOA!!!!!!
yea, i did the same thing,.. flashed my gsm diamond with cdma rom, after flash it just showed the bootscreen - Touch Diamond and there it stopped... so i got to the bootloader, connected the device to pc and flashed another rom from computer.. and it did work
no problem mayne
Just to clarify here, the ONLY reason to copy DIAMIMG.nbh to your device is if you do not want to update with the RUU. You can install every ROM using the RUU regardless of who made it.
That said, every time I want to update, I do have to copy it over to my phone as the USB port on it no longer works (it still charges, just says unknown device regardless of the ROM).
Hi guys!
I have been trying everything that I could find on XDA to fix my problem.
I got this HTC clone a few weeks ago, and it was working fine.
I decided to install a UI on it and it worked fine. After a while I got bored of the UI, so I decided to uninstall it. After the uninstall, the device indicated that it needed to be restarted. I did that, but after it rebooted, it started to reinstall Windows Mobile 6.1. I was annoyed by this, but was like, whatever, and let it continue.
Where the real problem started was when the device froze up (I left it alone for over an hour, but there was no change).
I then had to pull the battery. After I put the battery back into the T5355 it just keeps getting stuck on the "TOUCH Diamond2" screen.
I tried all the hard reset and soft reset tricks I could find and have no been able to either setting it back to factory or bootloader mode.
I was able to find a post that described how to place the boo.ini, flash.bin, and loader.bin file onto my micro sd card. I was able to to get the boot.ini an flash.bin files, but can't seem to find a loader.bin file (it that the actual OS rom?). I then found a post that showed how to use HiSilicon IDT to force the install of the OS Bin file (C02_HTC_20091102_R2127_英全视角B包.bin).
I followed the instructions on placing the T5355 into "Download" mode and pushing the OS bin fine to it.
I am able get the IDT software to detect the T5355 and start pushing the install, but the damned thing ends up giving an XLDR error.
PLEASE! PLEASE! Somebody help me! This phone is brand new and really want to get it working again.
Model: HTC(?) T5355
Please help me someone!!
Is there anyone out there that can help me???
I am so frustrated and can think of what else to do!
The biggest problem I have is that I can't use ActiveSync. If I could use that I wouldn't have much trouble.
Does anyone know how to use HiSilicon's IDT properly? The instructions I was working off of are in Russian. I think that a need a loader.bin file for the T5355 that I can put on my micro sd card...or maybe not...I don't know.
I just really want to get this device back to factory settings.
Please someone take pity on me!!!
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
I don't think you would be experiencing these problems with an original topaz
Please take care this is a HTC CLONE
Pisca said:
Please take care this is a HTC CLONE
Click to expand...
Click to collapse
oups, I'm high resolution on monitor, I thought it was saying "done" not "clone" ) ... there's a thread dedicated to china clones, look here http://forum.xda-developers.com/showthread.php?t=619643
run with a rom in bootloader, it shud work
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
Click to expand...
Click to collapse
DalvuS, thanks for the reply, but the issue is that I can't seem to get into bootloader mode . I wish I could. The T5355 seems to be stuck in the middle of wm 6.1 install. I need to somehow wipe the install and be able to push a reinstall back to the device.
I don't think you would be experiencing these problems with an original topaz
Click to expand...
Click to collapse
Exca that comment doesn't help me. It just makes me more sad. I was gipped when I bought the phone . I thought I paid for a "real" Diamond 2.
If you can't to catch the bootmode, looks like hardware problem.
You can't to repair it at home, imho. Try the specialized service.
..............
... and: are you sure about key combination for bootloader screen for CLONE?
Hello people, how can i dump my rom from my phone (mfu w71) for backup, because i cannot find any rom in english only in chinese. I started to dump the chinese rom with some chinese kitchen (K3系列ROM工具), but i'm stuck. I do not know to do anymore i have extracted ROM, SYS folder. I think it would be good to start another section on this forum for the chinese phones.
Some help from experienced cookers would me be much apreciated.
My T5355 is up and working!!!
Thanks to everyone who replied to my post!!!
I discovered that the problem was that the PC I was attempting the install from was running an AMD based processor.
I tried on the family laptop (which runs an Intel processor) and the install worked!
I AM SOOOO HAPPY!!!
b0gdi good luck with your issue. Try doing a search here in XDA for "dump my phone".
nothing[switched off] -> press start -> command -> bootloader -> bootloader commands -> system start -> play
checking one by one by interfering would have done the trick
I'm glad to hear that... so now you're ok
NEXT !
help me please
i Have Flash my phone 100 times with IDT for WM6.5 and WM6.1 all the versions my phone is T5355 Hot D2 but in one day i flash a rom that kill my phone the phone are conntinue to work but no screen picture only light i have try some russian Rom that kill my phone
the phone was been on guerant so i send him back to my supplier thay fix the phone but the factory said that thay need to change the screen so now thay really change the screen and the phone back to me with WM6.1 some New version 20.1.2010 some think like this i have made a call but the phone hang up and not make calls so i try to put him Back the WM6.5 English ROM that i use with this phone before i try to Flash Russian ROM that brake me the picture of the phone and block me the Bootloader Combination of SEnd+End+Power so that way i send him to repair .
so i try the English Rom that i have use before he DOwnload the Flash Fine but now the screen are stop to show picture But the Bootloader are work fine
so i try all the Roms that i have and all the same the screen dont want to show picture
some body have a same problem or can help me with this ?
Hello. Yesterday morning when i woke up suddenly my touch screen did not respond any more. I try reinstalling windows or hard reset but now i can not even get over tap the screen.Please help me. You already helped me once when i was going to throw it away because i thought it's a hardware problem and it was a software one.I did the soft reset and leave it for a day then it worked but when i wanted to charge, it happened again and i have the same problem now.Any way a thing it's certain it is a software problem.If you have other advice please help.
another problem
I tried installing lots of roms hoping it will be fine. but now i installed a 6.1 version of wm and when i try installing wm 6.5 it stopes in loading screen and the pc gives me an error conection.What about this?
Moved as not ROM Development.
Place a welcome.not file on root of storage card can be a .txt file but change the extension doesn't want to be welcome.not.txt this will get you past all the configs on setup.
Please be more specific
Where can i find a welcome.not file?
linucu said:
Where can i find a welcome.not file?
Click to expand...
Click to collapse
You make it out of a .txt file
Have done it 4 u.
Thank you but that was not the problem
I did as you said and it worked but that was not the problem.The problem is my touch screen not responding.And it's not a hardware problem because if i did as i have been told to fully charge the phone, then do a soft reset and leave it for a day it was as new.But when i try to charge it again i got the same not responding screen. Now after all this i have another issue and that is when i try doing a soft reset the phone resets and it sopped on gray screen with Loading... and the pc gives me error connection. So i get this only i put a 6.1wm. Is this the reason for not letting me change the wm to 6.5 one? i will go crazy with these strange things that are science but have no explanation. Where is the science then? What you did was to allow me to use the phone without touch screen. Well...thank you, but i know there is a way to get the phone normal again and that is what i need you to help me with. Thank you. Catalin
Are you Hard-SPL'd?
Regards problem if software then flashing a different ROM even stock should be able to tell you, i know you think not hardware but if repetitive then maybe you just fluked the being ok again.
Anyway flash another stock ROM, then if fine flash a 6.5, you don't have to use computer as can flash via SD.
First of all thank you
Thank you because you try to help but please talk so i can understand. What is stock rom?
"even stock should be able to tell you" what is stock?
And now i have another one. It can not connect to active sync.
tell me please how can i Flash form SD?
I can not insatll anything from pc
So i don't understand why it does not allow me to do anything like hard spl, or flash rom, or anything to install from pc. It connects to active sync and lets me access the card but when i try installing something it stops.
Dear Readers,
I have a few concerns about my recently bought Htc diamond.
The problem is that during bootup it stays frozen on the Touch Diamond bootscreens.
It has HardSPL Olinex v1.93 on it.
First i flashed back to the Stock Rom, worked fine only a couble of unexpected freezes wich made me think into using Mtty(set 14 0, task 29, task 8) to fully clear the phone and than reflash the NLD rom back on it.
Now flashing the rom went al the way 100%, and Congrats me after that.
I rebooted after that but never goes past the bootscreen with the red info lines.
So i thougt that restoring the SPL 1,93 olinex to factory setting might do the trick. But there is no way to do that since i cant get active sync to connect!
My problems is that although i can acces all bootloadmethods ,the phone is being recognized through USB, and all Rom/SPL flashes goes up to 100%. It still doesnt seem to save that rom on its memory.
and when i check the screens of the CustomRUU program it doesnt show any info add the older software version, only shows the info of the rom wich im going to flash.
If i check the USB icon on the task bar while connected to the pc, it says something like ..Qualcomm CDMA.. etc. ! the phone wasnt a CDMA version!
Any ideas?? is it Fixable or do my cats have something new to chew on??
many thanx,
Jeffrey
Copy any ROM you want to your Internal Storage, rename .nbh to diamimg.nbh, Restart your diamond and than immediately press Vol Down and back button, once in a bootloader press power button to flash rom, once finished restart Diamond, and see if ROM will be installed successfully
benko286 said:
Copy any ROM you want to your Internal Storage, rename .nbh to diamimg.nbh, Restart your diamond and than immediately press Vol Down and back button, once in a bootloader press power button to flash rom, once finished restart Diamond, and see if ROM will be installed successfully
Click to expand...
Click to collapse
Dear Benko,
How can i get acces to the internal storage?? Since the phone doesnt boot far enough to get connected in Active sync... are there other methods to acces the internal storage?
The USB trigger mode didn't work either as its not recognizing any flashdrive i connencts to it..
http://forum.xda-developers.com/showthread.php?t=540290
Especially this post:
http://forum.xda-developers.com/showpost.php?p=4194865&postcount=4
divxmaniak said:
http://forum.xda-developers.com/showthread.php?t=540290
Especially this post:
http://forum.xda-developers.com/showpost.php?p=4194865&postcount=4
Click to expand...
Click to collapse
What to do with this link??
I got Mtty running but i cant acces internal storage to copy a rom to it, and flashing by USB went all the way 100% but somehow the phone never boots in to the flashed rom.
Even trying a reflash doesnt show any signs of an older Rom being present on the phone memory..
One question about Mtty, when its said to use the ROM flasher i kinda assumed they ment the CustomRUU program. Am i right, or is there some build-in command to Flash a ROM within MTTY??
jvanzeijst said:
What to do with this link??
I got Mtty running but i cant acces internal storage to copy a rom to it, and flashing by USB went all the way 100% but somehow the phone never boots in to the flashed rom.
Even trying a reflash doesnt show any signs of an older Rom being present on the phone memory..
One question about Mtty, when its said to use the ROM flasher i kinda assumed they ment the CustomRUU program. Am i right, or is there some build-in command to Flash a ROM within MTTY??
Click to expand...
Click to collapse
i had the same problem.... i send it back to repair... had a hardware damage. Luckily i got it for free...
I don´t know if you have exactly the same problem, but it looks like that.
LORDShadowMan said:
i had the same problem.... i send it back to repair... had a hardware damage. Luckily i got it for free...
I don´t know if you have exactly the same problem, but it looks like that.
Click to expand...
Click to collapse
Well lets hope not, because i got mine for 50euro secondhanded, warenty is expired and im really not keen on spending more money on repair than what i paid for.
Have you tried to put another Radion on it?
dravik said:
Have you tried to put another Radion on it?
Click to expand...
Click to collapse
Actually yes i did and it doesnt make any difference.
The weird thing is that even after succesfull flashing both Harspl and Rom never seems to stay on the phone memory but the Radio get updated.
jvanzeijst said:
Actually yes i did and it doesnt make any difference.
The weird thing is that even after succesfull flashing both Harspl and Rom never seems to stay on the phone memory but the Radio get updated.
Click to expand...
Click to collapse
I had a problem with my phone where I did mtty, but forgot to rename the diamimg.nbh file on my phone. So it wouldn't get passed the bootscreen.
My solution was to connect the phone to the usb, hold down the up arrow(I think it was the up arrow) and soft-reset. It came up with those 3/4 color blocks and said "usb" at the bottom. I then used the official htc ruu(also didn't show the current rom on it) to flash the normal htc rom onto it and it worked. Then I just did the normal procedure to get the custom rom on again.
So are you trying to flash the original HTC rom onto it, or a custom rom? Cause if it's a custom ROM, maybe it's just the radio, not the actual OS?
moreph34r said:
I had a problem with my phone where I did mtty, but forgot to rename the diamimg.nbh file on my phone. So it wouldn't get passed the bootscreen.
My solution was to connect the phone to the usb, hold down the up arrow(I think it was the up arrow) and soft-reset. It came up with those 3/4 color blocks and said "usb" at the bottom. I then used the official htc ruu(also didn't show the current rom on it) to flash the normal htc rom onto it and it worked. Then I just did the normal procedure to get the custom rom on again.
So are you trying to flash the original HTC rom onto it, or a custom rom? Cause if it's a custom ROM, maybe it's just the radio, not the actual OS?
Click to expand...
Click to collapse
I tried both custom and Stock Roms several times. After flashing the Stock roms i noticed that the radio version get updated, just no OS to boot!
Since the flashing sequence completes to 100%, i think its strange that the os doent seemed to be copied at all. Is there a possibility that a bad SPL is causing the OS not to be found?? In the Bootloader it still says SPL v1.93 Olinex so i guess its still Hard spl'ed. But when i try connect the phone to pc by usb, it shows up as Qualcamm CDMA device then later changes to HTC...
The Phone is not a CDMA version but i think maybe there is a change that somehow a CDMA SPL accidentlly got uploaded to it. This supposed to cause a phone to brick.
Many thanx for trying to help!
jvanzeijst said:
I tried both custom and Stock Roms several times. After flashing the Stock roms i noticed that the radio version get updated, just no OS to boot!
Since the flashing sequence completes to 100%, i think its strange that the os doent seemed to be copied at all. Is there a possibility that a bad SPL is causing the OS not to be found?? In the Bootloader it still says SPL v1.93 Olinex so i guess its still Hard spl'ed. But when i try connect the phone to pc by usb, it shows up as Qualcamm CDMA device then later changes to HTC...
The Phone is not a CDMA version but i think maybe there is a change that somehow a CDMA SPL accidentlly got uploaded to it. This supposed to cause a phone to brick.
Many thanx for trying to help!
Click to expand...
Click to collapse
Ok, maybe you can try from scratch to re-flash everything?
You should still be able to HardSPL, by doing the soft-reset+vol down thing.
I'd suggest getting the HardSPL from here(I only used it once, but I know it worked for me):
http://forum.xda-developers.com/showthread.php?t=416211
Hopefully that alone is what you need but if it isn't, you should then be able to flash a radio onto the phone(there's a link in that thread too) and then the stock HTC rom(I think the stock would have a better chance than anything else)
All of those flashes should be possible by doing the soft-reset+vol down and then using the RUU. Do you know how to use the RUU to flash a HardSPL, Radio and then OS separately?
you should probably try a full mtty just before you flash the OS(just after you flash the radio) as well, do the set 14 0,task 28 and task 29 and then task 8
And regrading Windows picking up your phone as a CDMA, I can't remember what mine said, but I don't think you should worry much about what Windows thinks the phone is.
*Edit, you should follow the mtty guide here for the most part:
http://forum.xda-developers.com/showthread.php?t=540290
But the second last step(number 7) where you're required to remove the usb cable, soft-reset+vol down+back button to flash from the internal storage, you should keep the phone connected to the usb and soft-reset+vol down and flash the rom using the RUU
message deleted
moreph34r said:
Ok, maybe you can try from scratch to re-flash everything?
You should still be able to HardSPL, by doing the soft-reset+vol down thing.
I'd suggest getting the HardSPL from here(I only used it once, but I know it worked for me):
http://forum.xda-developers.com/showthread.php?t=416211
Hopefully that alone is what you need but if it isn't, you should then be able to flash a radio onto the phone(there's a link in that thread too) and then the stock HTC rom(I think the stock would have a better chance than anything else)
All of those flashes should be possible by doing the soft-reset+vol down and then using the RUU. Do you know how to use the RUU to flash a HardSPL, Radio and then OS separately?
you should probably try a full mtty just before you flash the OS(just after you flash the radio) as well, do the set 14 0,task 28 and task 29 and then task 8
And regrading Windows picking up your phone as a CDMA, I can't remember what mine said, but I don't think you should worry much about what Windows thinks the phone is.
*Edit, you should follow the mtty guide here for the most part:
http://forum.xda-developers.com/showthread.php?t=540290
But the second last step(number 7) where you're required to remove the usb cable, soft-reset+vol down+back button to flash from the internal storage, you should keep the phone connected to the usb and soft-reset+vol down and flash the rom using the RUU
Click to expand...
Click to collapse
Allright i'll give it another try..
keeping my fingers crossed!
moreph34r said:
Ok, maybe you can try from scratch to re-flash everything?......
Click to expand...
Click to collapse
Ok i tried its flashing the Stock HTC NLD rom now aroun 42.. 43%, its slow but atleast still going. This is a big Rom tough.
Two questions:
1. Flashing the hardspl took some time to initiate the progression bar and then suddenly in the blink of an eye from 0 to 100%,
after flashing the hardspl file wich showed in RUU as olinex v 1.40, it still showed SPL.193 olinex on the bootloader.. .. is this common??
2. Is it even possible to downgrade a bootloader?? i would love to have olinex 1.40 back.. i used it before and it worked fine on many roms...i keep thinking my SPL is the problem.
Bye now the Rom flashing finished and it didn't help.. its still frozen.
here is the output from MTTY, may be its usefull:
----------------------------
Cmd>set 14 0
HTCST ÚÈÒHTCE
Cmd>task 28
Format start
Fill RSVD information for block 288 to 321
Storage start sector=0xFF40, total sector=0xB080
Storage start block=1054, total block=706
Total Bad Block in CE: 0
Erase physical block from 1344 to 2032
si backup: Erase physical block from 2032 to 2048
Format end
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end
Cmd>task 8
-------------------------------------
,thanx any way
Did you use the corresponding stockRom (the one with the corresponding spl i mean):
_QMR_RUU_Diamond_HTC_NLD_1.93.404.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
Just in case you didn't, you can find it over here:
http://wiki.xda-developers.com/index.php?pagename=Diamond_Upgrades
Yes i did try, didnt work for me..
i kinda lose hope now.
Losing a phone sucks, first lost my iphone3g then bought this cheap as a replacement for the remaining contract, And now i really regrets that i tried restoring its stock rom,radio,spl since its really did brick the phone for good..
thanks for all the people that tried to help but i'm not sure if its fixable....
So thanx anyway..
yours,
Jeffrey
Mod. edit: not dev related, moved to general
gl though