Hello. Yesterday morning when i woke up suddenly my touch screen did not respond any more. I try reinstalling windows or hard reset but now i can not even get over tap the screen.Please help me. You already helped me once when i was going to throw it away because i thought it's a hardware problem and it was a software one.I did the soft reset and leave it for a day then it worked but when i wanted to charge, it happened again and i have the same problem now.Any way a thing it's certain it is a software problem.If you have other advice please help.
another problem
I tried installing lots of roms hoping it will be fine. but now i installed a 6.1 version of wm and when i try installing wm 6.5 it stopes in loading screen and the pc gives me an error conection.What about this?
Moved as not ROM Development.
Place a welcome.not file on root of storage card can be a .txt file but change the extension doesn't want to be welcome.not.txt this will get you past all the configs on setup.
Please be more specific
Where can i find a welcome.not file?
linucu said:
Where can i find a welcome.not file?
Click to expand...
Click to collapse
You make it out of a .txt file
Have done it 4 u.
Thank you but that was not the problem
I did as you said and it worked but that was not the problem.The problem is my touch screen not responding.And it's not a hardware problem because if i did as i have been told to fully charge the phone, then do a soft reset and leave it for a day it was as new.But when i try to charge it again i got the same not responding screen. Now after all this i have another issue and that is when i try doing a soft reset the phone resets and it sopped on gray screen with Loading... and the pc gives me error connection. So i get this only i put a 6.1wm. Is this the reason for not letting me change the wm to 6.5 one? i will go crazy with these strange things that are science but have no explanation. Where is the science then? What you did was to allow me to use the phone without touch screen. Well...thank you, but i know there is a way to get the phone normal again and that is what i need you to help me with. Thank you. Catalin
Are you Hard-SPL'd?
Regards problem if software then flashing a different ROM even stock should be able to tell you, i know you think not hardware but if repetitive then maybe you just fluked the being ok again.
Anyway flash another stock ROM, then if fine flash a 6.5, you don't have to use computer as can flash via SD.
First of all thank you
Thank you because you try to help but please talk so i can understand. What is stock rom?
"even stock should be able to tell you" what is stock?
And now i have another one. It can not connect to active sync.
tell me please how can i Flash form SD?
I can not insatll anything from pc
So i don't understand why it does not allow me to do anything like hard spl, or flash rom, or anything to install from pc. It connects to active sync and lets me access the card but when i try installing something it stops.
Related
Okay, so I just recently flashed to Touch-IT 4.4 by itje, and it's been working great. However, I just softreset my phone and now it's stuck in a boot loop just after finishing with the first splash with the text Touch-IT in silver..
It should probably be said that it reboots by itself, which I don 't think is normal for a bricked phone?
So I'm a bit stuck and don't really know what to do; Is my phone bricked (in which case I'll just have to unbrick it, which isn't a problem since there's a certain good guide that explain how to and I've already used it once), or what's wrong with my phone?
Meh, turns out it's possible to flash it with the hacked installer as well.. So I'm just going to reinstall the phone.
I just have one thing to say to all of you guys doing all this work on the ROM of Herald/Wing:
YOU. ****ING. ROCK. <3
Debdrup said:
Okay, so I just recently flashed to Touch-IT 4.4 by itje, and it's been working great. However, I just softreset my phone and now it's stuck in a boot loop just after finishing with the first splash with the text Touch-IT in silver..
It should probably be said that it reboots by itself, which I don 't think is normal for a bricked phone?
So I'm a bit stuck and don't really know what to do; Is my phone bricked (in which case I'll just have to unbrick it, which isn't a problem since there's a certain good guide that explain how to and I've already used it once), or what's wrong with my phone?
Meh, turns out it's possible to flash it with the hacked installer as well.. So I'm just going to reinstall the phone.
Click to expand...
Click to collapse
Take out your mSD card while rebooting and your device will start up fine
Is it the card that's doing it? Because I've soft-reset before without problems just fine. <.<
Gaah, I wish I had known that (or waited, but I was in a hurry to get my phone up and running again because I was expecting a call)..
It's not the cards fault. Somewhere here in the forum it was briefly discussed, but I can't find it right now.
It was said, that a certain DLL for SDHC support causes the looping.
It's called something like omap650sdhc.dll or so (you need to find out yourself, should be easy)
and by deleting or renaming it, it should solve the whole problem.
Never tested it myself, but it will not harm your device if you delete/rename that file.
That's the driver for the SD card drive... Depending on the rom you're using, it might be stuck inside the rom so you can't delete the file.
I asked Chikenbull on here to make a program that will rename that Omap file and reboot the device. I haven't tested it yet, but here it is.
Remember to use this AT YOUR OWN RISK.
GAMBIT999 said:
Take out your mSD card while rebooting and your device will start up fine
Click to expand...
Click to collapse
I've been doing this for the last month to avoid a HardReset. I've been having the boot-loop problem since i installed the HTChomeCustomizerV80 and/or HTCplus, and read about the warning too late: http://forum.xda-developers.com/showthread.php?t=326689
I've since removed the Today plugins, and the only annoyance remaining are the Backlight adjust function not working, and having to remove the microsd everytime I restart/power-on the Wing.
As I said, I'm trying to avoid a Hard Reset because I have 30+ programs installed and it's gonna take me a few days to reinstall all of them. I searched here with no success... all I found are the same saying "remove microSD at boot", which is what I'm doing, but it's a pain.
Tried GAMBIT999's suggestion, but can't remove omap850sdhc.dll from the \windows\ folder. Would DUPRADEE's suggestion of renaming this file with the program solve the restart-loop problem? Or is there other methods I haven't found, that'll save me the trouble of a Hard reset?
-cheers
edit: PROBLEM SOLVED!! thanks duprade
omap850sdhc.dll couldn't be deleted, but just changing the extension to omap850sdhc.000 solved the problem!!! Now I can restart without taking out the microSD!!! w00t w00t w00t !!!
Check for errors under Windows
One more possibility I forgot to mention which work fine for me.
After having the boot-loop symptom I took out my mSD card and checked it for errors under Windows.
I let Windows fix the errors and everything worked fine afterwards.
The procedure didn't took long even on a non USB2.0 port.
No card removing or file renaming anymore.
Folks having the boot-loop may try this solution out first before renaming/deleting the DLL.
My problem was SOLVED by simply renaming \Windows\omap850_sdhc.dll
It's funny how if you do not know the cause of the problem, SEARCH is useless. But once you find the answer (thanks Gambit999 and Duprade), going back to Search turns up pages of the same question posted over and over.
Anyways, credit goes to Paul at MoDaCo who found the solution on June 26:
http://www.modaco.com/content/HTC-Atlas-Atlas-MoDaCo-com/256186/Continuous-reboots-/
Changing to a blank new SD did nothing... but by Renaming the file, the PPC will reload the uncorrupted file from the ROM.
pls help
Its impossible to change the name or delete the file!
Pls help me!
p4350 wm 6
Thanks and pls sorry for my english!acces deniend its the reason to no rename!
I have had the same problem.This time after softreset for some Memmaid tweaks.The 1st.time It didnt occur to me to remove sd. and I'm certainly glad this works but heres the prob.After reinserting my 1gb.sd.I now have a file for Storage card & Storage card2.with 2 being the actual card.I cant remove or rename this file and cant launch apps.unless i do so through file explorer.And all progs.on the card are showing inactive generic icons.Any input.I did a hard reset AGAIN.so this would just be for further ref.I'm gettin up the balls to flash for the 1st. time with one of the roms from this site.
jcastex said:
Its impossible to change the name or delete the file!
Pls help me!
p4350 wm 6
Thanks and pls sorry for my english!acces deniend its the reason to no rename!
Click to expand...
Click to collapse
I've the same problem! can anyone help me? I tried Total Commander.
ruebyi
Hello all,
first, a big thanks to all the rom developers around. You transformed my Diamond in a usable and enjoyable tool.
What happened to me tonight is very frightening. In fact, I cannot believe what happened.
And this is the story: I was at a birthday party and later in the evening I checked my phone : it seemed to have frozen, so I rebooted it as I do sometimes when I have no other choice. But this time something strange happened : I got the following message "this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our customers" - what the ... ? No way to make a call, the message is impossible to remove... completely blocked !!!
I don't remember exactly the rom I flashed last because I sometimes change. It might be a dutty's release (75%M sure) - anyway I was in a very bad situation because my wife wasn't feeling well and I couldn't call her without finally borrowing a phone from someone.
I will flash a new rom tomorrow and I hope that the message will disappear but I can tell you that it is a very strange feeling when suddenly your phone refuses to operate normally. It's a nightmare.
I hope that someone has an explanation for this because I don't want to go trough this situation ever again, it's just so annoying to have a phone which tells you "No you can't use me; your trial period has expired" when you need it he most.
Thank you for your opinions in advance
Have you tried a hard reset?
Yep same problem here.
Using duttys 1.93 - Can't get to his website either.
Hard rest does not work - had to reflash back to branded (Telstra) ROM
i'm having the exact problem right now, what can i do to fix this? someone told me to reflash it but how? i'm VERY new to the diamond
hardreset does not work
I bought the phone from a person so it's second hand. The seller did mention he updated the ROM, I'm assuming this is the cause of the problem? help please
thanks!
I am getting the exact same problem.I do not know what to do.
Sigh and since my computer will not sync, I cannot reflash it. Hard set is also a no go.
ya I cant sync it with my computer either... i'm searching other sections on this forum and I cant seem to find one that teaches you how to flash without syncing with the computer
OK i got it well kinda sorta. If you hard reset and just use the date taht dutty had then your phone will load. Do not correct the date and you should also change the date on your computer so that it wont sync. Then donwload his new rom or whatever rom you prefer and then flash it. Then change the dates back. It worked for me.
thanks.. do you have the link for the new rom?
I'm going to give it a try
The link it dutt'y new rom is here http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip
just a question how do you flash it?
can you help me? i'm very new to this phone
I had the same problem last night- expired beta software. If I do a hard reset I believe I will loose all the info on the phone, is that correct?
I was thinking that changing the date will work, is there another way to change the date without having to loose the info?
Someone has a reliable link to an instruction on how to flash the ROM?
I am also using throy 2.3, to find the latest release please go to WWW.DUTTYTHROY.NET
Any help appreciated.
!everyone! you can flash roms from bootloader. hold volume down and the little red reset button, keep holding vol down untill bootloader. at the tri color screen, run ruu from host pc. everything will be fine with this method. just like activesync.
ok i to change the time and stuff and it actually can sync using active sync.. however.. when tried to install HSPL 1.24 after the part where the phone will turn black.. i click on the DiamondCustomRUU as instructed
but it says this "The application failed to initialize properly (0xc0000135). CLick on OK to terminate the application"
Is there a way I can recover this without losing all that is on my phone?
Do anybody know the password for the latest ROM 2.9 from Dutty? His page is unavailable right now....
Duttys V2.9 RTM Finale
someone please tell me how to flash.. from scratch? i hard reset my phone.. and i cant get HSPL to work. When i install the activesync way, the black screen turns on then i cant open DiamondCustomRUU
if i do i the bootloader way, when i connect from the three colour screen it cant pick up the phone because it says i'm missing Qualcomm CDMA Technologies MSM
please help been stuck for hours already
i won't flash Duttys ROM again!!! Right now i need my phone and it doesn't work! And if i reflash it i lose my data....
never again!
its you have a problem with duttys rom
you need to use his thread to point out your problems....
not this one.
Help help help...i just finished intalling duttys new leo 7 rom,now after restart my phone freezes on the 'smart mobility screen' i cant do anything more...i tried reset nothing.How do i get it to work please?
Have you followed the proper flashing procedure as explained here ?
Follow that guide and flash your phone again, it should be OK.
sounds like a bad flash, don't be scared it's quite simple.
if you are using the SD Card method, copy the file blacimg.nbh again to your card and flash again. or use anyother method.
i suggest that the safest way is the SD Card but make sure you have enough battery charge before you start
Has this been resolved?
Looks like it. He's posting in the radio rom thread today. http://forum.xda-developers.com/showpost.php?p=4862959&postcount=749
Lock plz.
it is specific to R7
I had the same problem with this R7.
To solve this i put the device in BootLoader mode and flash again.
But few times after the phone froze again and stuck. No way to make it boot cause it didn't go further than SmartMobility screen.
So i flashed a new rom to move from this scaring malfunction.
that is annoying cause this rom is very very pleasant and well optimized
Thread closed as query resolved
After I get out my diamond from my pc and than turned off it cannot start, it stoods on screen when it shows me version of my radio and ROM. I know that I have to do hard-reset but i dont want to, because i were so dumb that I dont backed up my mdata and programs which Ihave installed in Memory. Is there any chance to turn it on without the hard-reset???
Thx in advance.
betacheer said:
After I get out my diamond from my pc and than turned off it cannot start, it stoods on screen when it shows me version of my radio and ROM. I know that I have to do hard-reset but i dont want to, because i were so dumb that I dont backed up my mdata and programs which Ihave installed in Memory. Is there any chance to turn it on without the hard-reset???
Thx in advance.
Click to expand...
Click to collapse
do you mean bootloader (Tri-Coloured Sceen) Or the splash screen (Black Screen with touch diamond on it)?
I suggest you do a hard reset, and check this thread on how to easly back up ur programs, settings and manila config for future use using SASHIMI
http://forum.xda-developers.com/showthread.php?t=538513
Stuck in Bootloader screen
Whlie trying to upgrade the ROM on my Touch Diamond something happend so i got an error and the upgrade stopped. Now i cant continue the upgrade becouse my pc wont recognize the phone when i connect it with the usb-cabel. When i try to run the upgrade again i just get an error saying that there is something wrong with the connection.
I have tried hard reset but nothing works.
Hope someone can help me with this problem.
Thanks
/Kenneth
KenOslo said:
Whlie trying to upgrade the ROM on my Touch Diamond something happend so i got an error and the upgrade stopped. Now i cant continue the upgrade becouse my pc wont recognize the phone when i connect it with the usb-cabel. When i try to run the upgrade again i just get an error saying that there is something wrong with the connection.
I have tried hard reset but nothing works.
Hope someone can help me with this problem.
Thanks
/Kenneth
Click to expand...
Click to collapse
i think I am in same situation. phone is bricked :/
I dont think your phone is bricked, put your phone into bootloaded mode, connect phone to pc and flash the nbh file using CustomRUU. That should fix things
Dom1n8tr1x said:
I dont think your phone is bricked, put your phone into bootloaded mode, connect phone to pc and flash the nbh file using CustomRUU. That should fix things
Click to expand...
Click to collapse
each bootloader i have tried using the different hard spl version gets as far as the progress bar but fails at 0% with 262 connection error. tried about 6 different hard spl, signed unsigned olinex, customRUU. each of them all fail at 0% of progress bar.
will try it again today.
sorry betacheer for the hijack, but hope this helps you out in some way too.
Hi guys!
I have been trying everything that I could find on XDA to fix my problem.
I got this HTC clone a few weeks ago, and it was working fine.
I decided to install a UI on it and it worked fine. After a while I got bored of the UI, so I decided to uninstall it. After the uninstall, the device indicated that it needed to be restarted. I did that, but after it rebooted, it started to reinstall Windows Mobile 6.1. I was annoyed by this, but was like, whatever, and let it continue.
Where the real problem started was when the device froze up (I left it alone for over an hour, but there was no change).
I then had to pull the battery. After I put the battery back into the T5355 it just keeps getting stuck on the "TOUCH Diamond2" screen.
I tried all the hard reset and soft reset tricks I could find and have no been able to either setting it back to factory or bootloader mode.
I was able to find a post that described how to place the boo.ini, flash.bin, and loader.bin file onto my micro sd card. I was able to to get the boot.ini an flash.bin files, but can't seem to find a loader.bin file (it that the actual OS rom?). I then found a post that showed how to use HiSilicon IDT to force the install of the OS Bin file (C02_HTC_20091102_R2127_英全视角B包.bin).
I followed the instructions on placing the T5355 into "Download" mode and pushing the OS bin fine to it.
I am able get the IDT software to detect the T5355 and start pushing the install, but the damned thing ends up giving an XLDR error.
PLEASE! PLEASE! Somebody help me! This phone is brand new and really want to get it working again.
Model: HTC(?) T5355
Please help me someone!!
Is there anyone out there that can help me???
I am so frustrated and can think of what else to do!
The biggest problem I have is that I can't use ActiveSync. If I could use that I wouldn't have much trouble.
Does anyone know how to use HiSilicon's IDT properly? The instructions I was working off of are in Russian. I think that a need a loader.bin file for the T5355 that I can put on my micro sd card...or maybe not...I don't know.
I just really want to get this device back to factory settings.
Please someone take pity on me!!!
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
I don't think you would be experiencing these problems with an original topaz
Please take care this is a HTC CLONE
Pisca said:
Please take care this is a HTC CLONE
Click to expand...
Click to collapse
oups, I'm high resolution on monitor, I thought it was saying "done" not "clone" ) ... there's a thread dedicated to china clones, look here http://forum.xda-developers.com/showthread.php?t=619643
run with a rom in bootloader, it shud work
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
Click to expand...
Click to collapse
DalvuS, thanks for the reply, but the issue is that I can't seem to get into bootloader mode . I wish I could. The T5355 seems to be stuck in the middle of wm 6.1 install. I need to somehow wipe the install and be able to push a reinstall back to the device.
I don't think you would be experiencing these problems with an original topaz
Click to expand...
Click to collapse
Exca that comment doesn't help me. It just makes me more sad. I was gipped when I bought the phone . I thought I paid for a "real" Diamond 2.
If you can't to catch the bootmode, looks like hardware problem.
You can't to repair it at home, imho. Try the specialized service.
..............
... and: are you sure about key combination for bootloader screen for CLONE?
Hello people, how can i dump my rom from my phone (mfu w71) for backup, because i cannot find any rom in english only in chinese. I started to dump the chinese rom with some chinese kitchen (K3系列ROM工具), but i'm stuck. I do not know to do anymore i have extracted ROM, SYS folder. I think it would be good to start another section on this forum for the chinese phones.
Some help from experienced cookers would me be much apreciated.
My T5355 is up and working!!!
Thanks to everyone who replied to my post!!!
I discovered that the problem was that the PC I was attempting the install from was running an AMD based processor.
I tried on the family laptop (which runs an Intel processor) and the install worked!
I AM SOOOO HAPPY!!!
b0gdi good luck with your issue. Try doing a search here in XDA for "dump my phone".
nothing[switched off] -> press start -> command -> bootloader -> bootloader commands -> system start -> play
checking one by one by interfering would have done the trick
I'm glad to hear that... so now you're ok
NEXT !
help me please
i Have Flash my phone 100 times with IDT for WM6.5 and WM6.1 all the versions my phone is T5355 Hot D2 but in one day i flash a rom that kill my phone the phone are conntinue to work but no screen picture only light i have try some russian Rom that kill my phone
the phone was been on guerant so i send him back to my supplier thay fix the phone but the factory said that thay need to change the screen so now thay really change the screen and the phone back to me with WM6.1 some New version 20.1.2010 some think like this i have made a call but the phone hang up and not make calls so i try to put him Back the WM6.5 English ROM that i use with this phone before i try to Flash Russian ROM that brake me the picture of the phone and block me the Bootloader Combination of SEnd+End+Power so that way i send him to repair .
so i try the English Rom that i have use before he DOwnload the Flash Fine but now the screen are stop to show picture But the Bootloader are work fine
so i try all the Roms that i have and all the same the screen dont want to show picture
some body have a same problem or can help me with this ?