Hello,
I purchased a Galaxy S5 SM G900A (AT&T) whose previous owner supposedly only wanted to upgrade it to Android 5.0 and then stopped working. According to him, the phone was working properly before trying to upgrade it.
I have tried almost I have found and searched here and other sites, but it seems that anything is working. I think the phone is dead.
As a last resource, I have ordered a JIG, and should have it early next week. Do you think this can help?
Please see attached images for your reference, and would appreciate if someone can help me to confirm if this can be solved or not.
Odin Log (With Repartition Enable)
Code:
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Odin Log (Without Repartition Enable)
Code:
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you in advance.
Anyone?
Yep
There's a type of .tar do you need to flash on Odin.. I did the same damn thing that you did ..you could talk to the Samsung and see if they'll replace it since it is a hardware feature .. I'll see if I can find something to help you out ..because I've been looking at this place for like 2 weeks now
Shadowdemized said:
There's a type of .tar do you need to flash on Odin.. I did the same damn thing that you did ..you could talk to the Samsung and see if they'll replace it since it is a hardware feature .. I'll see if I can find something to help you out ..because I've been looking at this place for like 2 weeks now
Click to expand...
Click to collapse
Any help you can provide will be greatly appreciated.
Best regards.
Yep
http://forum.xda-developers.com/att-galaxy-s5/help/tried-downgrading-5-0-to-4-4-2-bricked-t3093826
Do you mean the stock partition thing?
Because I already try to flash that file but still getting the same error.
Yep
On no bull**** lie ur ass off to samsung .. sorry, but thts all i know for now ... or if u got some dough buy a tmobile s5 off ebay and sim unlock it. that's what I heard people been doing these days
Related
Hi
I have now for couple of hours tried to find a solution.. did not suceed. So i hope someone has time to help a bit.
Firstly i've tried to "CF-Root" my galaxy S, but i got the message below.
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I thought maybe it is because of my firmware, so i tried to change the firmware with odin, but got the same message..
I have found people with the same problem, but no answers, so i'm begging for help cause i want to go "darky"
Any known solution to the above?
thanx.
Hi!
When i got the same result, the solution was simple: put my phone to download mode
remal said:
Hi!
When i got the same result, the solution was simple: put my phone to download mode
Click to expand...
Click to collapse
probably a very stupid question but "Download mode" means to enable the "USB Debuging" or am i totally off?
No, it is by turning your phone off, holding volume down, home and power on until you see a yellow triangle. That is download mode.
Don't try it if you have no idea what you are doing. Also, your download mode may not work which might mean it needs to be fixed.
Sent from my GT-I9000 using XDA App
I think it is better to read first (HOW TO section): http://forum.xda-developers.com/showthread.php?t=723596
That is the point: "Several batches of phones that were sold have the download-mode button combo disabled (VolumeDown+Home+Power or alternatively Home+Power on some phones). Check if the download-mode combo works BEFORE flashing!"
speedin said:
Hi
I have now for couple of hours tried to find a solution.. did not suceed. So i hope someone has time to help a bit.
Firstly i've tried to "CF-Root" my galaxy S, but i got the message below.
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I thought maybe it is because of my firmware, so i tried to change the firmware with odin, but got the same message..
I have found people with the same problem, but no answers, so i'm begging for help cause i want to go "darky"
Any known solution to the above?
thanx.
Click to expand...
Click to collapse
i guess your three button download mode works..what you can do at this point is to download a stock rom...if the rom is only a tar file, place it on the PDA with repartition unchecked and no pit file...after flashing the stock rom, flash the CF Root with unchecked repartition and no pit...place the CF Root tar file on the PDA...that's it...place darky's in your sdcard and flash via CWM
Also make sure no part of Samsung Kies is running (use ctrl alt del and check for it running in the background) as I tried odin after using Kies and had this problem until checking this and rebooting
Sent from my GT-I9000 using XDA App
Thnx for all the responses.
@ jaju123
So that's called download mode, did not know that, ive been there before just did not know that it was called DL Mode
never mind, thnk you, i have now FW 2.2.1...
now the next step is the CF Root and after that i will become darky
always think before you act, is a good thought to take with you from this piont in your quest for the darky !
That is to late.. ive already become darky.though i miss my danish t9 dictionary with samsung/gingerbread keyboard.. The once in the market are not the best.. Is it possible to take out a t9 dictionary from a standard samsung FW and put it in the darky i use now
Sent from my GT-I9000 using XDA App
Same issues
Hi there,
I'm look the solution for this everywhere. I got no idea which one I'm wrong.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I have been try around a week. I'm using KH3_modem_s2_+_ODIN\modem.bin. Izzit correct? Plz do help me
hafees89 said:
Hi there,
I'm look the solution for this everywhere. I got no idea which one I'm wrong.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I have been try around a week. I'm using KH3_modem_s2_+_ODIN\modem.bin. Izzit correct? Plz do help me
Click to expand...
Click to collapse
had the same issue... in case you are still curious, I got it working by unplugging and replugging the usb cable (with odin running)
speedin said:
Hi
I have now for couple of hours tried to find a solution.. did not suceed. So i hope someone has time to help a bit.
Firstly i've tried to "CF-Root" my galaxy S, but i got the message below.
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I thought maybe it is because of my firmware, so i tried to change the firmware with odin, but got the same message..
I have found people with the same problem, but no answers, so i'm begging for help cause i want to go "darky"
Any known solution to the above?
thanx.
Click to expand...
Click to collapse
Just shutdown your laptop or computer
Triskite said:
had the same issue... in case you are still curious, I got it working by unplugging and replugging the usb cable (with odin running)
Click to expand...
Click to collapse
this worked for me
NONE of these "solutions" worked for me. NOT even unplugging and plugging it back in
Can someone provide a *working* solution?
Arceist Justin said:
NONE of these "solutions" worked for me. NOT even unplugging and plugging it back in
Can someone provide a *working* solution?
Click to expand...
Click to collapse
you should use old version of odin
you use new version of odin?
new version doesnt support
Tuesday, August 18, 2015
I just upgrade my Samsung Galaxy Tab 3V from 4.4.4 Kitkat to 5.0.2 (S6 ROM)
And it says:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Well, how can I do this???
hi guys first time poster here,please bare with me.
i have just flashed my sgs with darkys rom 9.2,as u will see by my link below
the phone is now off and AIO Captivate Toolbox 3BF program is still on the pic which is in my link,can some one please tell me what am i to do next please.
darn i cant post my link to show,,opps,
ok i will try and explain,after i added the rom and pit and pda files i clicked on start
then the program done its thing which i then had this message
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> modem.bin
<ID:0/005> cache.rfs
<ID:0/005> dbdata.rfs
<ID:0/005> factoryfs.rfs
<ID:0/005> param.lfs
<ID:0/005> zImage
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
this is where am stuck at,the phone is off and the program is still at the faze.
do i power on my phone and close the program down or is there anything else need to be done.hope someone here can help me out.
thankyou.
Never mind guys.took phone back to shop.now i will leave stock fw on.this will teach me not to play around with things. :-D
Sent from my GT-I9000 using XDA App
Hello sirs, I have a galaxy s with user code. on the other hand my device is unable to go to downloading mode(three keys problem). can anyone help me to solve this problem?
Thanks
Its on the front page .
http://forum.xda-developers.com/showthread.php?t=819551
jje
Thanks sir, But when I try to flash with odin, I alwayes encounter with
this error:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried with 4 different roms and odins. But same results appeared. only this file Voodoo-stable-5.5-Froyo-GT-I9000-odin-pda can flashed on phone and phone again turned on with user lock. can you help me please?
If your Galaxy is locked with a user code then you need to visit a service centre and provide proof of ownership.
jje
Today i decided to flash serendipity...very cool...then i proceeded to install 3 different kernel managers before i got 1 to work..i flashed a new kernel so i could overclock and when i reset my phone it get stuck on the at&t screen and some ***** keeps repeating "converting things and politicians to optimize a extensive form" or something very close to that (its a digitized female voice) Can some one help me? I can get into downloading mode but i am a nebie at odin so i was able to run odin and this is what the output window said
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Removed!!
<ID:0/005> Removed!!
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/005> Removed!!
Lol, that voice was voodoo lagfix converting partitions from rfs to ext4 that was supposed to happen.
So do i just let it on?
jaymz77 said:
So do i just let it on?
Click to expand...
Click to collapse
if u want ur phone to feel faster, thats lagfix
Yes just let it go, it will boot when its finished, take about 5 minutes
Sent from my SGH-T959 using XDA App
You flashed Serendipity correctly. Those voices are Voodoo Lagfix doin' it's thing, and it's all part of the first installation process for that ROM. As a future note, when you do install a custom ROM, be patient for the first boot. It's completely normal for a phone to take 5+ minutes for the first time after a flash.
I'm totally unclear about the rest, because you didn't do a great job of describing your problem and what exactly you did after flashing Serendipity.
After flashing serendipity i wanted to overclock...So i got various kernel managers(until i got one that worked) so i could flash my kernel...Its weird because i was playing with serendipity....it didnt do that on the initial boot...its seems like the kernel flash is the one that caused this?
Yes the kernel you flashed had voodoo lagfix in it.
LOL i feel stupid...I have been surfing xda for years now and you guys are so informative i never had to post a question... I really searched for this problem but, as i see now its not a problem.... I really appreciate everyone's lightning fast responses... I knew you guys would never disappoint.... Thanks again!
Its been running for like 15 mins... is that normal?
You should probably odin back to stock and try again
Sent from my SGH-T959 using XDA App
Also serendipity already has an oc kernel, just flash the rom and get setcpu app and set it up1200 max 200 min, and you should be good
Sent from my SGH-T959 using XDA App
i was rooted under 4.3 ML2, then i followed the second way(http://forum.xda-developers.com/showthread.php?t=2722073) to flash the pwnedkitkat.zip in safetrap, but my screen wasnt working so i searched forum and saw that it says reflash PDA from ML2, from http://forum.xda-developers.com/showthread.php?t=2721247 i did but it couldnt load up, so i wanted to reflash the BL for ML2, but instead i used the wrong one, i used the one called boot.tar.md5, which supposed to be PDA instead of BL, now i cant even boot up my phone.
ive done some research, and here are seems like where the problem from:
1: i cant recover it with safestrap installed.
2: the firmware on my phone is newer than the stock rom(ML2) im trying to flash.
im totally freaked right now, can somebody help me please, really really apreciate your help. (is there anyway i can get the ODIN files for 4.4.2? thanks thanks !!! compare with root, i need my phone first !!)
following is my odin log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone screen it says
PRODUCT NAME : SGH-I537
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
knox kernel lock: 0*0
knox warranty void: 0*1
csb-config-lsb:0*30
write protection: enable
ommc burst mode :enabled
start 224.1440
sw rev check fail: fused:4 binary:3
tqsdyy said:
i was rooted under 4.3 ML2, then i followed the second way(http://forum.xda-developers.com/showthread.php?t=2722073) to flash the pwnedkitkat.zip in safetrap, but my screen wasnt working so i searched forum and saw that it says reflash PDA from ML2, from http://forum.xda-developers.com/showthread.php?t=2721247 i did but it couldnt load up, so i wanted to reflash the BL for ML2, but instead i used the wrong one, i used the one called boot.tar.md5, which supposed to be PDA instead of BL, now i cant even boot up my phone.
ive done some research, and here are seems like where the problem from:
1: i cant recover it with safestrap installed.
2: the firmware on my phone is newer than the stock rom(ML2) im trying to flash.
im totally freaked right now, can somebody help me please, really really apreciate your help. (is there anyway i can get the ODIN files for 4.4.2? thanks thanks !!! compare with root, i need my phone first !!)
following is my odin log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone screen it says
PRODUCT NAME : SGH-I537
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
knox kernel lock: 0*0
knox warranty void: 0*1
csb-config-lsb:0*30
write protection: enable
ommc burst mode :enabled
start 224.1440
sw rev check fail: fused:4 binary:3
Click to expand...
Click to collapse
I think your screen is deffective..? no other user has reported this issue
Sunderwear said:
I think your screen is deffective..? no other user has reported this issue
Click to expand...
Click to collapse
after many trials, i used boot.tar.md5 for BL and succesfully got back rooted on 4.3, however, i cant make phone calles, text messages are fine though, and hte screen, of course, works great . i rooted 4.3 then i followed your step for rooted 4.3 to 4.4.2 and i succefully installed it and the touch screen is not reponding, not at all, but only with one touch to unlock it, and after unlock, i cant do nothing. and most of the time i cant even unlock it. i am fine with rooted 4.3 or unrooted whatever, i jsut need a phone badly... please help me. when i try to make a phone call, after i pressed "call" nothing happens, the phone froze, yet people im dialing can receive the phone call, just that they cnat hear me.
(im not sure if this is a stupid question , but will there be an ODIN restore for 4.4.2? if yes, how long will it be released? i think the fact i cant make phone calls actually contributed by the wrong bootloader, (or i might be wrong). thanks a lot man, i know you're great! really appreaciate your work on rooting 4.3)