hi guys first time poster here,please bare with me.
i have just flashed my sgs with darkys rom 9.2,as u will see by my link below
the phone is now off and AIO Captivate Toolbox 3BF program is still on the pic which is in my link,can some one please tell me what am i to do next please.
darn i cant post my link to show,,opps,
ok i will try and explain,after i added the rom and pit and pda files i clicked on start
then the program done its thing which i then had this message
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> modem.bin
<ID:0/005> cache.rfs
<ID:0/005> dbdata.rfs
<ID:0/005> factoryfs.rfs
<ID:0/005> param.lfs
<ID:0/005> zImage
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
this is where am stuck at,the phone is off and the program is still at the faze.
do i power on my phone and close the program down or is there anything else need to be done.hope someone here can help me out.
thankyou.
Never mind guys.took phone back to shop.now i will leave stock fw on.this will teach me not to play around with things. :-D
Sent from my GT-I9000 using XDA App
Related
Today i decided to flash serendipity...very cool...then i proceeded to install 3 different kernel managers before i got 1 to work..i flashed a new kernel so i could overclock and when i reset my phone it get stuck on the at&t screen and some ***** keeps repeating "converting things and politicians to optimize a extensive form" or something very close to that (its a digitized female voice) Can some one help me? I can get into downloading mode but i am a nebie at odin so i was able to run odin and this is what the output window said
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Removed!!
<ID:0/005> Removed!!
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/005> Removed!!
Lol, that voice was voodoo lagfix converting partitions from rfs to ext4 that was supposed to happen.
So do i just let it on?
jaymz77 said:
So do i just let it on?
Click to expand...
Click to collapse
if u want ur phone to feel faster, thats lagfix
Yes just let it go, it will boot when its finished, take about 5 minutes
Sent from my SGH-T959 using XDA App
You flashed Serendipity correctly. Those voices are Voodoo Lagfix doin' it's thing, and it's all part of the first installation process for that ROM. As a future note, when you do install a custom ROM, be patient for the first boot. It's completely normal for a phone to take 5+ minutes for the first time after a flash.
I'm totally unclear about the rest, because you didn't do a great job of describing your problem and what exactly you did after flashing Serendipity.
After flashing serendipity i wanted to overclock...So i got various kernel managers(until i got one that worked) so i could flash my kernel...Its weird because i was playing with serendipity....it didnt do that on the initial boot...its seems like the kernel flash is the one that caused this?
Yes the kernel you flashed had voodoo lagfix in it.
LOL i feel stupid...I have been surfing xda for years now and you guys are so informative i never had to post a question... I really searched for this problem but, as i see now its not a problem.... I really appreciate everyone's lightning fast responses... I knew you guys would never disappoint.... Thanks again!
Its been running for like 15 mins... is that normal?
You should probably odin back to stock and try again
Sent from my SGH-T959 using XDA App
Also serendipity already has an oc kernel, just flash the rom and get setcpu app and set it up1200 max 200 min, and you should be good
Sent from my SGH-T959 using XDA App
i was rooted under 4.3 ML2, then i followed the second way(http://forum.xda-developers.com/showthread.php?t=2722073) to flash the pwnedkitkat.zip in safetrap, but my screen wasnt working so i searched forum and saw that it says reflash PDA from ML2, from http://forum.xda-developers.com/showthread.php?t=2721247 i did but it couldnt load up, so i wanted to reflash the BL for ML2, but instead i used the wrong one, i used the one called boot.tar.md5, which supposed to be PDA instead of BL, now i cant even boot up my phone.
ive done some research, and here are seems like where the problem from:
1: i cant recover it with safestrap installed.
2: the firmware on my phone is newer than the stock rom(ML2) im trying to flash.
im totally freaked right now, can somebody help me please, really really apreciate your help. (is there anyway i can get the ODIN files for 4.4.2? thanks thanks !!! compare with root, i need my phone first !!)
following is my odin log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone screen it says
PRODUCT NAME : SGH-I537
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
knox kernel lock: 0*0
knox warranty void: 0*1
csb-config-lsb:0*30
write protection: enable
ommc burst mode :enabled
start 224.1440
sw rev check fail: fused:4 binary:3
tqsdyy said:
i was rooted under 4.3 ML2, then i followed the second way(http://forum.xda-developers.com/showthread.php?t=2722073) to flash the pwnedkitkat.zip in safetrap, but my screen wasnt working so i searched forum and saw that it says reflash PDA from ML2, from http://forum.xda-developers.com/showthread.php?t=2721247 i did but it couldnt load up, so i wanted to reflash the BL for ML2, but instead i used the wrong one, i used the one called boot.tar.md5, which supposed to be PDA instead of BL, now i cant even boot up my phone.
ive done some research, and here are seems like where the problem from:
1: i cant recover it with safestrap installed.
2: the firmware on my phone is newer than the stock rom(ML2) im trying to flash.
im totally freaked right now, can somebody help me please, really really apreciate your help. (is there anyway i can get the ODIN files for 4.4.2? thanks thanks !!! compare with root, i need my phone first !!)
following is my odin log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone screen it says
PRODUCT NAME : SGH-I537
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
knox kernel lock: 0*0
knox warranty void: 0*1
csb-config-lsb:0*30
write protection: enable
ommc burst mode :enabled
start 224.1440
sw rev check fail: fused:4 binary:3
Click to expand...
Click to collapse
I think your screen is deffective..? no other user has reported this issue
Sunderwear said:
I think your screen is deffective..? no other user has reported this issue
Click to expand...
Click to collapse
after many trials, i used boot.tar.md5 for BL and succesfully got back rooted on 4.3, however, i cant make phone calles, text messages are fine though, and hte screen, of course, works great . i rooted 4.3 then i followed your step for rooted 4.3 to 4.4.2 and i succefully installed it and the touch screen is not reponding, not at all, but only with one touch to unlock it, and after unlock, i cant do nothing. and most of the time i cant even unlock it. i am fine with rooted 4.3 or unrooted whatever, i jsut need a phone badly... please help me. when i try to make a phone call, after i pressed "call" nothing happens, the phone froze, yet people im dialing can receive the phone call, just that they cnat hear me.
(im not sure if this is a stupid question , but will there be an ODIN restore for 4.4.2? if yes, how long will it be released? i think the fact i cant make phone calls actually contributed by the wrong bootloader, (or i might be wrong). thanks a lot man, i know you're great! really appreaciate your work on rooting 4.3)
Hello.
I do not know if the title is good. I will explain here what happened.
my Galaxy S was android 2.3.4 jvq. I wanted to intall a newer one, a android 4.4.x
I followed a thread about how to do that.
I tryed to root the phone uing Odin and cf-root, but it failed it. After that when i powered on the phone i get some error with phone to computer and a yellow triangle in the middle.
I founded a program on internet to "unbrick" that, but now i can only enter in download mode using the 3 buttons, and dont start in normal or recovery mode.
I tryed to flah it again uing odin with cf-root but failed every time.
the odin log says this :
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know any solution to my problem?
Thx.
maybe this will help
GabrielAK89 said:
Hello.
I do not know if the title is good. I will explain here what happened.
my Galaxy S was android 2.3.4 jvq. I wanted to intall a newer one, a android 4.4.x
I followed a thread about how to do that.
I tryed to root the phone uing Odin and cf-root, but it failed it. After that when i powered on the phone i get some error with phone to computer and a yellow triangle in the middle.
I founded a program on internet to "unbrick" that, but now i can only enter in download mode using the 3 buttons, and dont start in normal or recovery mode.
I tryed to flah it again uing odin with cf-root but failed every time.
the odin log says this :
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know any solution to my problem?
Thx.
Click to expand...
Click to collapse
Hi
did you already try to get back to 100% stock ROM??
-
-
i can not yet post links but if you google "galaxy s stock rom" and than the first link.
take a look here for the stock ROMS
http://www.sammobile.com/firmwares/database/GT-I9000/
it warked with another version...strange thow.
Thx.
I will try now to put again the 4.4.x
Hello,
I purchased a Galaxy S5 SM G900A (AT&T) whose previous owner supposedly only wanted to upgrade it to Android 5.0 and then stopped working. According to him, the phone was working properly before trying to upgrade it.
I have tried almost I have found and searched here and other sites, but it seems that anything is working. I think the phone is dead.
As a last resource, I have ordered a JIG, and should have it early next week. Do you think this can help?
Please see attached images for your reference, and would appreciate if someone can help me to confirm if this can be solved or not.
Odin Log (With Repartition Enable)
Code:
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Odin Log (Without Repartition Enable)
Code:
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you in advance.
Anyone?
Yep
There's a type of .tar do you need to flash on Odin.. I did the same damn thing that you did ..you could talk to the Samsung and see if they'll replace it since it is a hardware feature .. I'll see if I can find something to help you out ..because I've been looking at this place for like 2 weeks now
Shadowdemized said:
There's a type of .tar do you need to flash on Odin.. I did the same damn thing that you did ..you could talk to the Samsung and see if they'll replace it since it is a hardware feature .. I'll see if I can find something to help you out ..because I've been looking at this place for like 2 weeks now
Click to expand...
Click to collapse
Any help you can provide will be greatly appreciated.
Best regards.
Yep
http://forum.xda-developers.com/att-galaxy-s5/help/tried-downgrading-5-0-to-4-4-2-bricked-t3093826
Do you mean the stock partition thing?
Because I already try to flash that file but still getting the same error.
Yep
On no bull**** lie ur ass off to samsung .. sorry, but thts all i know for now ... or if u got some dough buy a tmobile s5 off ebay and sim unlock it. that's what I heard people been doing these days
Here is the official stock firmware for the New (2016) Galaxy Tab S2 8.0" T713.
Use this to restore your tablet or fix a soft brick.
This requires Odin to flash.
Model Name: Galaxy Tab S2 8.0
Model: SM-T713
Country: Cellular South (XAR)
Firmware Version: T713XXU1APD9
OS: Android Marshmallow
OS Version: 6.0.1
PDA: T713XXU1APD9
CSC: T713XAR1APD9
Download T713XAR1APD9 Here
Hello everybody!
Sorry if this si not fine for me to post in this thread, but I think my question is quite related, in case I apologize in advance.
I recently bought a Galaxy tab S2 8" (SM-T719).
I installed the TWRP and applied SuperSU (as per guide: http://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627)
All fine...
Only later I recall that I stupidly forgot to make a complete STOCK backup. If I need, can I use the STOCK provided in this thread even if it is for T713?
The only difference I see comparing the specs is the additional 2G support.
Thank you in advance and thanks to everybody for the great work!
PS: if it can be usefull to anybody I can make a BACKUP of the current state of the tablet.
Best regards!!
DeeXii said:
Here is the official stock firmware for the New (2016) Galaxy Tab S2 8.0" T713.
Use this to restore your tablet or fix a soft brick.
This requires Odin to flash.
Model Name: Galaxy Tab S2 8.0
Model: SM-T713
Country: Cellular South (XAR)
Firmware Version: T713XXU1APD9
OS: Android Marshmallow
OS Version: 6.0.1
PDA: T713XXU1APD9
CSC: T713XAR1APD9
Download T713XAR1APD9 Here
Click to expand...
Click to collapse
Can we use the firmware for T813 as well?
Or do you know a source where to get that firmware?
Thanks...about to Root and went to SamMobile and another Samsung site to get Stock in case of any problems Rooting....But Its NOWHERE to be found!!! A quick Google search led me here to trusted XDA!!! Thanks Bro!!
I cant believe there is no development for this 713 Tab! I have bought or tried everything Samsung and this is a a great tablet...I had the Tab S 32GB and sold it...never found another..and Note Edge also that had nooo development as well...I guess I get the things that are not popular..2014 Note 10.1 and Note Pro 12.2 there are NO Roms on those either! My Note 5 is the only thing I get to flash...But thanks again...I needed this
Sent from my SM-T713 using XDA-Developers mobile app
DionWhite33 said:
I cant believe there is no development for this 713 Tab!
Click to expand...
Click to collapse
This will change when I get my hands on one Friday
I've just tried to flash this firmware for my SM-713 tab and it does not go past the Samsung logo (fading in/out).
I used Odin 3.10.7 and extracted the file "T713XXU1APD9_T713XAR1APD9_HOME.tar.md5" then pointed the AP field in Odin, to the file and flashed.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> adspso.bin
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> sec.dat
<ID:0/005> cmnlib.mbn
<ID:0/005> keymaster.mbn
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Bhups said:
I've just tried to flash this firmware for my SM-713 tab and it does not go past the Samsung logo (fading in/out).
I used Odin 3.10.7 and extracted the file "T713XXU1APD9_T713XAR1APD9_HOME.tar.md5" then pointed the AP field in Odin, to the file and flashed.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> adspso.bin
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> sec.dat
<ID:0/005> cmnlib.mbn
<ID:0/005> keymaster.mbn
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Factory reset
Lightn1ng said:
Factory reset
Click to expand...
Click to collapse
Thanks!!!
Factory rest worked great!!
Bhups said:
Thanks!!!
Factory rest worked great!!
Click to expand...
Click to collapse
Awesome!
Lightn1ng said:
This will change when I get my hands on one Friday
Click to expand...
Click to collapse
Are you cooking something up? I cant wait! Im also getting an update from Samsung thats about 285MBs...looks to small to be Firmare.maybe its a Security Patch?
Sent from my SM-T713 using XDA-Developers mobile app
DionWhite33 said:
Are you cooking something up? I cant wait! Im also getting an update from Samsung thats about 285MBs...looks to small to be Firmare.maybe its a Security Patch?
Sent from my SM-T713 using XDA-Developers mobile app
Click to expand...
Click to collapse
Lightning ROM... Its in the dev forums...
There's a newer version for this firmware T713XXU1APG1 (build 01.07.2016, the one in the first post is build 20.04.2016). I'm not sure what the difference is. Has anybody already downloaded the new version and saved it somewhere on the Internet? A free download from https://samsung-firmware.org/model/SM-T713/region/XAR/ takes almost 7 hours.
dxxvi said:
There's a newer version for this firmware T713XXU1APG1 (build 01.07.2016, the one in the first post is build 20.04.2016). I'm not sure what the difference is. Has anybody already downloaded the new version and saved it somewhere on the Internet? A free download from https://samsung-firmware.org/model/SM-T713/region/XAR/ takes almost 7 hours.
Click to expand...
Click to collapse
I've hosted the file on a separate mirror on Mega: https://mega.nz/#!uZ0S2LKJ!cv9_833R1kUVndRl4lpIM_UV51WiCtbVrWAd9S3m2TQ. No file changes, just a download/rehost.
Image restore via Odin fails with blue caution triangle screen
I had my S2 SM-T713 8.0 Rooted and tried to install Lightning. The WiFi failed, so I flashed the WiFi fix. Still no WiFi. Restored the rooted TWRP backup. It booted up to the lock screen, but refused to allow me to use the only pin that had ever been entered on the machine.
After numerous attempts to get around the pin issue, I attempted to flash this stock firmware via Odin. Every attempt failed at a different point. MD5 double checked and matched. The latest attempt ran as follows:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> modem.bin
<ID:0/003> adspso.bin
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am stuck at the blue screen saying that An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software. That software reports that my device is not supported. The other thing on the screen is a message that SU REV CHECK FAIL : [aboot]Fused 2 > Binary 1. I also cannot turn off the screen.
I have been rooting and running numerous ROMS on phones and tablets for 6 years. Any hope left?
stock firmware
Sooo, I made the fatal mistake of rooting with out having the back-up stock os...... long story short, now I cant find out which version of the firmware I need. Can i find out what the stock firmware was by my TABLETS' model number??? btw......
SM-T713NZKEXAR is my model and i cant seem to find it anywhere.
please helppp
dirtymikeandtheboyz said:
Sooo, I made the fatal mistake of rooting with out having the back-up stock os...... long story short, now I cant find out which version of the firmware I need. Can i find out what the stock firmware was by my TABLETS' model number??? btw......
SM-T713NZKEXAR is my model and i cant seem to find it anywhere.
please helppp
Click to expand...
Click to collapse
Use the one linked in the OP.
Before you odin twrp or anything else let the tablet update to the latest firmware.
Success after loading the new updated Samsung firmware from link in post by dxxvi.
"I had my S2 SM-T713 8.0 Rooted and tried to install Lightning. The WiFi failed, so I flashed the WiFi fix. Still no WiFi. Restored the rooted TWRP backup. It booted up to the lock screen, but refused to allow me to use the only pin that had ever been entered on the machine."
Finally had success after loading the new updated Samsung firmware from link in post by dxxvi (took almost 20 hours slow load). Confirmed that it does require a factory reboot after hanging at Samsung logo.
The new firmware allows you to choose whether to require a pin after reboot or just accept fingerprint input.
There is a newer version of of the firmware T713XXU2APJ1, release date 05.10.2016
HELPP
Model - sm-t713nzkexar
had a issue with wifi not working when flashing custom rom, long story short... i wanted to go back stock firmware and is the T713XAR1APD9 not the stock firmware for my device?? i tried to flash and it failed, and for some reason i cant attach the screenshot of the log in odin, but after failure while still in "download mode", at the top of screeen tablet says,
"SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1"