Just a couple quick noobie questions about flashing roms - One (M7) Q&A, Help & Troubleshooting

There has to be a way to tell how stable a Rom will be on your phone...
I had read about wanting the firmware versions to match? What about radios?
Also, how do I know if my phone is lollipop vs. kitkat? Isn't that important if you are S-On?
I'm asking because right now, I'm just booting Roms, hoping they'll work, just begging for a brick.
Sorry if this has been asked to death, maybe my search abilities are lacking. My reading comprehension is not, so links are always appreciated!
Thank you!

1. There is. Flash the ROM and use it. If it's stable, it's stable. If it reboots, does all kind of stuff that it shouldn't, well, then it's not stable.
2. Radios are included in firmwares, so if you flash a firmware.zip, you will automatically get the radio matching that firmware.
3. Lollipop firmwares start with no 7, whilst KitKat firmwares start with no6. You can use KK ROM on LP firmware, and vice versa, but there is no guarantie everything will work as it should. I can say I used both of named combos and didn't have any issues.
4. Why are you begging for a brick???
5. 4 was just a joke ?

donkeykong1 said:
4. Why are you begging for a brick???
Click to expand...
Click to collapse
More time to spend with you guys
Thank you for the hasty and informative reply! I will now begin my hunt for ROMs and firmware!

Enigmatic Fart said:
More time to spend with you guys
Thank you for the hasty and informative reply! I will now begin my hunt for ROMs and firmware!
Click to expand...
Click to collapse
I'm sorry if my post seemed hasty, that wasn't my intention. You said you were a noob (aren't we all?) so I just tried to answer as simple as I could

donkeykong1 said:
I'm sorry if my post seemed hasty, that wasn't my intention. You said you were a noob (aren't we all?) so I just tried to answer as simple as I could
Click to expand...
Click to collapse
No, they were simple questions that you answered completely. You had just posted it about ten minutes after I did the thread, lol
I'm grateful that I wasn't waiting all day before I could start browsing ROMs with this information! Thankyouthankyouthankyou! Haha

Oh hey, while I have your attention, are there any decent firmware flashing guides out there? I only see ROM guides
I'm running into a problem when transferring firmware zips to my root: "Cannot copy item: The device has either stopped responding or is disconnected." Every other file works, but not the two firmwares I downloaded for ARHD... I'm hoping I'm just missing something really simple, or can learn enough to locate other compatible firmwares with ARHD 92 and my device.\
EDIT: actually, all the information I needed was in here. Still open to other decent guides to read, however!

Enigmatic Fart said:
Oh hey, while I have your attention, are there any decent firmware flashing guides out there? I only see ROM guides
I'm running into a problem when transferring firmware zips to my root: "Cannot copy item: The device has either stopped responding or is disconnected." Every other file works, but not the two firmwares I downloaded for ARHD... I'm hoping I'm just missing something really simple, or can learn enough to locate other compatible firmwares with ARHD 92 and my device.\
EDIT: actually, all the information I needed was in here. Still open to other decent guides to read, however!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2316726 I used this thread to do my firmware upgrade. there is a very easy to understand guide on how to flash firmware in it too

Related

First Attempt at Modding my Samsung Captivate…..

I just got my first REAL smartphone, actually it’s still on FedEx truck.
From reading the stickies on this forum, here’s what I gathered so far (and I am starting from scratch – nothing on my phone yet)
1) Root my phone with the ‘OneClick’ tool.
2) Install ROM (I am thinking Cognition, since it’s recommended for beginner).
3) Install Theme (haven’t decide on one yet) – any suggestions?
So, am I missing anything?
You seem to have a good grasp on what you are doing. I do recommend buying/making a Jig to have around just in case.
You're well on your way.
Make sure and read up on bootloaders and the difference between 2.1/2.2 and 2.3 bootloaders as getting this wrong is the main thing that can lead to "big" trouble.
Also take a look at Odin, Odin One Click return to stock and make sure and know the difference between those and the Odin One Click w/3 Button Combo.
thanks guys, i think i have a good idea of what i want to do but i am still struggling to find the details to do the above.
for example, what difference if my phone batch is 1010, or 1012, or older?
do i need to get an microsd card, if so what size/brand?
what sofware do i need to download?
etc, etc. etc.
i will continue to browse through the forums, but if you know of any links please post.
also, what does the jig do? do i need to have one?
thanks
First decide what u want to do, As u stated first root the phone and then u want a custom ROM, So go ahead and try it.
Only thing i will advice start from a froyo rom then to the gingerbread as there would be less chances to brick your phone while flashing the b.loades.
Read the OP properly of the ROM which you want to flash there are many good froyo rom available here. But just be sure what u are doing.
Please for the love of all things unholy, read this thread http://forum.xda-developers.com/showthread.php?t=1049294
and if the phone comes with froyo you will need this after rooting before flashing a rom http://forum.xda-developers.com/showthread.php?t=1052991
At the start DEFINITE GUIDE TO BRICKING, LOL.
Its just a joke be sure you read it all.
rkkaranrk said:
First decide what u want to do, As u stated first root the phone and then u want a custom ROM, So go ahead and try it.
Only thing i will advice start from a froyo rom then to the gingerbread as there would be less chances to brick your phone while flashing the b.loades.
Read the OP properly of the ROM which you want to flash there are many good froyo rom available here. But just be sure what u are doing.
Click to expand...
Click to collapse
thanks, yes from what i've read it's better to stay away from the gingerbread roms - at least for novice like myself.
My personal favorite were Firefly 3.0 and serendipity 6.4 links below.
http://forum.xda-developers.com/showthread.php?t=900568
http://forum.xda-developers.com/showthread.php?t=914284
Again i will say read the OP carefully before flashing.
I have a few Captivates in the family and IMHO the first thinkg to do before flashing anything is to purchase Root Explorer in the market (for around $4) then back up your EFS folder (in the main directory) and save it to a cd so you ALWAYS have a hard copy of it. These files are specific to your phone and if they get screwed up during flashing, you phone may not be able to be used as a phone anymore. The back up copy will save you.
All of the above stuff is good. I was a noob about 6 months ago but I spent hours upon hours of reading and watching videos about flashing and moding. Good luck!
rkkaranrk said:
My personal favorite were Firefly 3.0 and serendipity 6.4 links below.
http://forum.xda-developers.com/showthread.php?t=900568
http://forum.xda-developers.com/showthread.php?t=914284
Again i will say read the OP carefully before flashing.
Click to expand...
Click to collapse
thanks, but what do you mean "read the OP carefully"
jack man said:
I have a few Captivates in the family and IMHO the first thinkg to do before flashing anything is to purchase Root Explorer in the market (for around $4) then back up your EFS folder (in the main directory) and save it to a cd so you ALWAYS have a hard copy of it. These files are specific to your phone and if they get screwed up during flashing, you phone may not be able to be used as a phone anymore. The back up copy will save you.
All of the above stuff is good. I was a noob about 6 months ago but I spent hours upon hours of reading and watching videos about flashing and moding. Good luck!
Click to expand...
Click to collapse
great, these are what i love to hear.
things to do, or not to do, before modding/flashing.
smokarz said:
thanks, but what do you mean "read the OP carefully"
Click to expand...
Click to collapse
the OP is the original post or poster, like your first question is the op, and you are also the op of the thread. in that context he meant the original post, because that will have most of the information about the rom...but i would expand on that to read the op and the a couple of pages in, and also if its a large thread with alot of posts read atleast the LAST 5 or 6 pages also.
anymore terms you are unfamiliar with read the op of this thread carefully: http://forum.xda-developers.com/showthread.php?t=1093062
thanks for clarying.
just got my phone in the mail.
i looked at the batch number under the battery slot and it shows 1106.
does this mean i have version 2.1 or 2.2? what would be the appropriate app/tool for rooting?
thanks
The batch had nothing to do with the firmware....that just means your phone was built in june of 2011. But since it's a new phone it more than likely has 2.2 confirm this in settings>about phone> firmware version.
Use super one click to root.
BUT FIRST PLEASE READ SOME MORE.
All of the information you are looking is already on here at the very least twice probably WAY more.
it is indeed version 2.2
so i read the first page of this thread and also watched the youtube clip. it looks straight enough to root. but i got a question. should i run the universal root or the captivate root?
http://forum.xda-developers.com/showthread.php?t=803682&page=442
smokarz said:
so i read the first page of this thread and also watched the youtube clip. it looks straight enough to root. but i got a question. should i run the universal root or the captivate root?
http://forum.xda-developers.com/showthread.php?t=803682&page=442
Click to expand...
Click to collapse
I would use SuperOneClick to root 2.2, however, the only version that was successful for me was version 1.6.5. The newer versions gave me errors or said FAILED when trying to root. For me, it has always worked with 1.6.5
thanks, but i only see v1.7 and v1.95. where can i get v1.65?
also, i do not need the samsung driver for rooting right? only for flashing?
smokarz said:
thanks, but i only see v1.7 and v1.95. where can i get v1.65?
also, i do not need the samsung driver for rooting right? only for flashing?
Click to expand...
Click to collapse
You should have the driver installed on your computer for anything you do with the phone. Make sure after you install drivers to plug in your phone to the computer in all the different modes it has - in debugging mode, not in debug mode, in download mode, and connecting as an external drive. The computer will install all the drivers when you do this.
I will try to attach v1.6.5 of Super One CLick. I hope it's ok with the moderators here that I am posting the software. Just unzip the folder and double click the android icon in that folder.

[ASK]Answers to all your questions...!

Hey guys i am starting this thread here as i find there are so many people asking questions and bricking their phones.I just want to help out people and save them from bricking their phones..
i have tried all Froyo based roms available for the captivate.i have good experience in rooting,clockworkmod and flashing roms.I would like to help out all new members here as much possible because just 2 months back i had trouble finding out things...
So what are you guys waiting for ask away....!
P.S:also i kindly request the other senior members and developers here to correct me if i am wrong anywhere and ya i dont want any donations....
Hey, I'm working on something with a similar spirit as this.
A work in progress: self help brick recovery guide
If you would want help out with this. I believe that it could help the q&a and other section of the captivate thread a lot by reducing the number of brick threads
If either of you have experience with web coding, perhaps it would be worthwhile to make up a page that has an interactive checklist of brick steps. Sort of a step-by-step troubleshooter.
For example, the first page could just be the question about whether the phone shows any signs of life at all or not, then have a page with selectable items about the Rom/kernel/modem setup, then move into more specific items.
See the attached zip for what I'm talking about.
speedy_11 said:
Hey, I'm working on something with a similar spirit as this.
A work in progress: self help brick recovery guide
If you would want help out with this. I believe that it could help the q&a and other section of the captivate thread a lot by reducing the number of brick threads
Click to expand...
Click to collapse
Same spirit here mate i am with you lets do it....!
But i will be focussing on problems of members other than bricking and also i believe prevention would be better than cure....!
jmtheiss said:
If either of you have experience with web coding, perhaps it would be worthwhile to make up a page that has an interactive checklist of brick steps. Sort of a step-by-step troubleshooter.
For example, the first page could just be the question about whether the phone shows any signs of life at all or not, then have a page with selectable items about the Rom/kernel/modem setup, then move into more specific items.
See the attached zip for what I'm talking about.
Click to expand...
Click to collapse
I saw the zip and got what you are saying i liked it. I have a decent hold over html & java so i must be able to create that....!
But i will need space to host it....!
Perhaps in lieu of hosting space, save it as an all-in-one zip file and post it on here. You wouldn't need a large amount additional space (I assume) as there probably wouldn't be a huge need for images. If that's the case, it would be all text, which should be fairly small.
jmtheiss said:
Perhaps in lieu of hosting space, save it as an all-in-one zip file and post it on here. You wouldn't need a large amount additional space (I assume) as there probably wouldn't be a huge need for images. If that's the case, it would be all text, which should be fairly small.
Click to expand...
Click to collapse
true it wont be a big zip file......!
I will create it and post it here
Wow jmtheiss you took my idea to the next level, i never though of making it interactive. But that my be the key that really will make it work.
sorry adicool I'm no good with HTML or coding i will have to leave that to you. But I have a knack for graphic design. Plus I can find and collect the images that could be use as examples (ex. like a soft brick screen)
speedy_11 said:
Wow jmtheiss you took my idea to the next level, i never though of making it interactive. But that my be the key that really will make it work.
sorry adicool I'm no good with HTML or coding i will have to leave that to you. But I have a knack for graphic design. Plus I can find and collect the images that could be use as examples (ex. like a soft brick screen)
Click to expand...
Click to collapse
i just created a test version to see if i still remember html just have a look at this attachment below....!
open the test.html first i have just created a working link for rooting others i will be doing soon,tell me what you think of it....!
adicool said:
i just created a test version to see if i still remember html just have a look at this attachment below....!
open the test.html first i have just created a working link for rooting others i will be doing soon,tell me what you think of it....!
Click to expand...
Click to collapse
Looks good to me. Clean, simple, easy to follow.
A good starting point, if you need any help feel free to ask.
Thought here: The one package is good. I'm also thing that we can have each section posted package as a separate package too (along with the whole package). So those who only need one thing like rooting the can just download that section
Hi! I'm new to the forums and need some help. I have stock I897UCKB1, sucessfully rooted and unlocked it. I would like to try out some ROMs, CM7 first. How should i start? I assume i have Eclair/Froyo bootloaders, right? I've installed ROM Manager Premium, clicked flash clockworkmod, and to reboot to recovery but it's only stock recovery. How should i proceed? Also i need some enlightment on bootloaders: if i flash the newest GB ATT bootloaders will every ROM work with it? Thanks in advance!
Go to the general section, there is a thread called "sticky roll-up" in there is a link to a thread called "e: signature verification failed" that is the work around you need for cwm (or any zip) to flash
Or you can flash a froyo kernel that has cwm baked in with odin like speedmod...
I wouldn't mess with bootloaders st this point in your flashing experience that its the only time you risk a real hard brick do leave those alone until you know for sure what you're doing.
I totally forgot about muse, so here's my on take of the guide.
bazarimajom said:
Hi! I'm new to the forums and need some help. I have stock I897UCKB1, sucessfully rooted and unlocked it. I would like to try out some ROMs, CM7 first. How should i start? I assume i have Eclair/Froyo bootloaders, right? I've installed ROM Manager Premium, clicked flash clockworkmod, and to reboot to recovery but it's only stock recovery. How should i proceed? Also i need some enlightment on bootloaders: if i flash the newest GB ATT bootloaders will every ROM work with it? Thanks in advance!
Click to expand...
Click to collapse
I would advice you to first try flashing a few froyo based roms just to gain experience in flashing after that you can move over to GB
as told by my friends here there is a thread here that fixes that cwm problem .!
If you still need help or cant find it do post here and i would be more than happy to help...!whatever you do just dont mess with bootloaders atm as they can cause your device to be bricked...
I would say start off first by flashing cognition 4.5.3....!
speedy_11 said:
A good starting point, if you need any help feel free to ask.
Thought here: The one package is good. I'm also thing that we can have each section posted package as a separate package too (along with the whole package). So those who only need one thing like rooting the can just download that section
Click to expand...
Click to collapse
Hmmm well that can be done !
i have college today i will get started with the html again once i come back....
lets finish this thing soon!
Edit:just finsihed the package for 2.2 only,have a look at the attachment,also its not complete yet but it had basic things...!
studacris said:
Go to the general section, there is a thread called "sticky roll-up" in there is a link to a thread called "e: signature verification failed" that is the work around you need for cwm (or any zip) to flash
Or you can flash a froyo kernel that has cwm baked in with odin like speedmod...
I wouldn't mess with bootloaders st this point in your flashing experience that its the only time you risk a real hard brick do leave those alone until you know for sure what you're doing.
Click to expand...
Click to collapse
adicool said:
I would advice you to first try flashing a few froyo based roms just to gain experience in flashing after that you can move over to GB
as told by my friends here there is a thread here that fixes that cwm problem .!
If you still need help or cant find it do post here and i would be more than happy to help...!whatever you do just dont mess with bootloaders atm as they can cause your device to be bricked...
I would say start off first by flashing cognition 4.5.3....!
Click to expand...
Click to collapse
Thanks, i was able to get CWM to work with speedmod kernel, so i take your advice now and try out some froyo roms!
bazarimajom said:
Thanks, i was able to get CWM to work with speedmod kernel, so i take your advice now and try out some froyo roms!
Click to expand...
Click to collapse
Cool.....!
dont forget to follow the instructions before flashing...
adicool said:
Edit:just finsihed the package for 2.2 only,have a look at the attachment,also its not complete yet but it had basic things...!
Click to expand...
Click to collapse
The information looks good, i saw that on the flash back to stock you didn't put hemdiall. Since linux and mac users cant use odin
Did you take a peak at my attempt with muse?
speedy_11 said:
The information looks good, i saw that on the flash back to stock you didn't put hemdiall. Since linux and mac users cant use odin
Did you take a peak at my attempt with muse?
Click to expand...
Click to collapse
oops i forgot that, i dont use mac so i missed it lol....!
yeah i saw your attempt it was decent enough mate,if you want to try more software try adobe dreamweaver it will help you develop web pages without html
dreamweaver would be great but my current computer wouldn't be able to handle it and i dont have the money for it. muse is free until the final product is done that why im using it.
i pm'ed you but i dont know if it sent

New N6 shipped with developer build?

Just bought a brand new N6 and its not downloading any ota's, still on 5.0. The build is LNX07M which is a developer build and apparently will not download any ota's. Has anyone heard of this? Did a quick Google search and there is hardly anything about this build.
I have no access to a computer, am I stuck on this build and 5.0?
csdaytona said:
Just bought a brand new N6 and its not downloading any ota's, still on 5.0. The build is LNX07M which is a developer build and apparently will not download any ota's. Has anyone heard of this? Did a quick Google search and there is hardly anything about this build.
I have no access to a computer, am I stuck on this build and 5.0?
Click to expand...
Click to collapse
no access at all?
simms22 said:
no access at all?
Click to expand...
Click to collapse
Not at the moment. What will I need to do?
This is my first nexus device and the last phone I rooted/flashed was the G1 way back in the day.
I was excited to get my phone today so this kind of sucks....
csdaytona said:
Not at the moment. What will I need to do?
This is my first nexus device and the last phone I rooted/flashed was the G1 way back in the day.
I was excited to get my phone today so this kind of sucks....
Click to expand...
Click to collapse
ohh.. that sucks. i remember my g1
i have a way that will probably work out fine, but this way is highly looked down upon on xda. would you be willing to try? btw, im one of those that would look down on this way, unless in certain situations..
simms22 said:
ohh.. that sucks. i remember my g1
i have a way that will probably work out fine, but this way is highly looked down upon on xda. would you be willing to try? btw, im one of those that would look down on this way, unless in certain situations..
Click to expand...
Click to collapse
OK what is it and why is it frowned upon?
csdaytona said:
OK what is it and why is it frowned upon?
Click to expand...
Click to collapse
because its not "proper", and normally isnt used properly. but ill explaine to you the proper way. you can try an app called kingsroot. you csnt get it at the play store, youll have to search google for it. after you install it, then run it, youll have root. but, youre not done yet. you will want to download the latest twrp recovery for the nexus 6 with your phone and keep it there. then you will unstall flashify from the play store. you will now use flashify to flash the twrp recovery. now, last thing, to get your bootloader unlocked. you will install any bootloader unlock apps, like boot unlocker or similar(that might delete everything from your phone), then youre done. ive never tried this on a nexus, but have on other devices, just so you know.
simms22 said:
because its not "proper", and normally isnt used properly. but ill explaine to you the proper way. you can try an app called kingsroot. you csnt get it at the play store, youll have to search google for it. after you install it, then run it, youll have root. but, youre not done yet. you will want to download the latest twrp recovery for the nexus 6 with your phone and keep it there. then you will unstall flashify from the play store. you will now use flashify to flash the twrp recovery. now, last thing, to get your bootloader unlocked. you will install any bootloader unlock apps, like boot unlocker or similar(that might delete everything from your phone), then youre done. ive never tried this on a nexus, but have on other devices, just so you know.
Click to expand...
Click to collapse
That seems like a lot of work. If I can get to a computer tomorrow, what can I do then?
Btw, thanks for helping me out.
csdaytona said:
That seems like a lot of work. If I can get to a computer tomorrow, what can I do then?
Btw, thanks for helping me out.
Click to expand...
Click to collapse
If you can get to a computer, download this: https://dl.google.com/dl/android/aosp/shamu-mra58k-factory-5b07088c.tgz
It's the Marshmallow (6.0) factory image for the Nexus 6. Run the batch file inside and it'll flash your phone. Note that this WILL wipe it.
Here's the actual Google-supplied information on it: https://developers.google.com/android/nexus/images?hl=en
|Jason8| said:
If you can get to a computer, download this: https://dl.google.com/dl/android/aosp/shamu-mra58k-factory-5b07088c.tgz
It's the Marshmallow (6.0) factory image for the Nexus 6. Run the batch file inside and it'll flash your phone. Note that this WILL wipe it.
Here's the actual Google-supplied information on it: https://developers.google.com/android/nexus/images?hl=en
Click to expand...
Click to collapse
First time doing this, but it's OK to jump straight to 6.0?
csdaytona said:
First time doing this, but it's OK to jump straight to 6.0?
Click to expand...
Click to collapse
It'll be fine. It's the complete system image, so it doesn't matter what you're on currently. Note that you will have to install all sorts of extra crap to get the Android SDK installed and working and the proper drivers, but it's not that hard, just gigs of downloads when everything is all said and done.
Like I said, it WILL wipe your phone completely.
csdaytona said:
That seems like a lot of work. If I can get to a computer tomorrow, what can I do then?
Btw, thanks for helping me out.
Click to expand...
Click to collapse
if you can get to a computer..
you can unlock your bootloader with "fastboot oem unlock"
then fastboot flash twrp recovery
then flash a custom kernel wiyh the latest supersu in your new recovery.
and then boot up with root, an unlocked bootloader, and a custom recovery
|Jason8| said:
It'll be fine. It's the complete system image, so it doesn't matter what you're on currently. Note that you will have to install all sorts of extra crap to get the Android SDK installed and working and the proper drivers, but it's not that hard, just gigs of downloads when everything is all said and done.
Like I said, it WILL wipe your phone completely.
Click to expand...
Click to collapse
Not worried about wiping the phone, I've literally only had it for a few hours and nothing is loaded on it.
Would be possible to just install an ota to get me on the right upgrade path? I'm just trying to do the quickest and easiest method possible.
csdaytona said:
Not worried about wiping the phone, I've literally only had it for a few hours and nothing is loaded on it.
Would be possible to just install an ota to get me on the right upgrade path? I'm just trying to do the quickest and easiest method possible.
Click to expand...
Click to collapse
If it's not grabbing an OTA, not sure what else you can do, short of downloading all the OTAs and flashing via recovery. But no guarantee that'll work as you're on a development build... There probably isn't an OTA to go from your development build to a release build.
csdaytona said:
I have no access to a computer, am I stuck on this build and 5.0?
Click to expand...
Click to collapse
simms22 said:
no access at all?
Click to expand...
Click to collapse
csdaytona said:
Not at the moment.
Click to expand...
Click to collapse
csdaytona said:
That seems like a lot of work. If I can get to a computer tomorrow, what can I do then?
Click to expand...
Click to collapse
Dude, come on... I know this is the Q&A section, and were supposed to be nicer here... But this lazyness is bull****.
You act like using a computer is impossible, then as soon as it takes some work.... You can get at one the next day?
Stop expecting to be spoon fed and at least try to learn something fist. There are a TON of write ups on how to do this. You spend how much money on a phone, and now you don't care to educate yourself on it?
Instead of expecting other to do all the work for you, read through the stickied index thread in the general section
http://forum.xda-developers.com/nexus-6/general/nexus-6-index-thread-t3229412
It has a newbie guide that literally holds your hand through the whole process. Post 2 has info on "how to flash factory images", use method 2 as method 1 in that thread will not work with the MM factory image.
Nice people have already spend a lot of time and effort documenting these things for you, as they are common questions. People like Simms and the other posters in this thread answer questions and offer support for free out of the kindness of their heart... Don't create extra work for them by ignoring all the effort already put out by other members, expecting it all to be regurgitated to you.
|Jason8| said:
If it's not grabbing an OTA, not sure what else you can do, short of downloading all the OTAs and flashing via recovery. But no guarantee that'll work as you're on a development build... There probably isn't an OTA to go from your development build to a release build.
Click to expand...
Click to collapse
Fastboot, as described in the threads mentioned above, will completely overwrite the pertinent partitions, regardless of what was there... dev build or not. No need to flash and apply countless incremental updates. Google provides not only full system images, but the information to use them on their web page...
|Jason8| said:
If it's not grabbing an OTA, not sure what else you can do, short of downloading all the OTAs and flashing via recovery. But no guarantee that'll work as you're on a development build... There probably isn't an OTA to go from your development build to a release build.
Click to expand...
Click to collapse
Gotcha. I'll try to flash 6.0 tomorrow. Wish me luck.
Thanks for the help!
scryan said:
Fastboot, as described in the threads mentioned above, will completely overwrite the pertinent partitions, regardless of what was there... dev build or not. No need to flash and apply countless incremental updates. Google provides not only full system images, but the information to use them on their web page...
Click to expand...
Click to collapse
I linked him to that already. No need to be a **** about it. He was looking for an easy way to do it now, when he doesn't have a computer. **** got crazy, so he asked if it would be easier with a computer, which the answer is yes.
Wouldn't you be excited as **** if you had a new phone? Wouldn't you want to get it up and running as quickly as possible? Well... now he's gotta wait until he has a computer. Obviously installing an OTA and doing the incremental updates would be easier, which is what he was looking for. Since that's not an option, we laid out other ways to go about doing it. So he's getting to a computer tomorrow.
---------- Post added at 09:51 PM ---------- Previous post was at 09:50 PM ----------
csdaytona said:
Gotcha. I'll try to flash 6.0 tomorrow. Wish me luck.
Thanks for the help!
Click to expand...
Click to collapse
No problem man. I wish you luck!
If you do plan on modding it/rooting it/romming it in the future, DEFINITELY unlock your bootloader before you set up the phone or that'll wipe it, too.
|Jason8| said:
Wouldn't you be excited as **** if you had a new phone? Wouldn't you want to get it up and running as quickly as possible? Well... now he's gotta wait until he has a computer. Obviously installing an OTA and doing the incremental updates would be easier, which is what he was looking for. Since that's not an option, we laid out other ways to go about doing it. So he's getting to a computer tomorrow.
Click to expand...
Click to collapse
You act like I was born with a nexus 6... It was a new phone to me too. I was so excited I read as much as I could on it, thanking the people who were so gracious to spend their personal time writing guides so I could understand the process well enough to be comfortable with my phone and help others here.
scryan said:
Dude, come on... I know this is the Q&A section, and were supposed to be nicer here... But this lazyness is bull****.
You act like using a computer is impossible, then as soon as it takes some work.... You can get at one the next day?
Stop expecting to be spoon fed and at least try to learn something fist. There are a TON of write ups on how to do this. You spend how much money on a phone, and now you don't care to educate yourself on it?
Instead of expecting other to do all the work for you, read through the stickied index thread in the general section
http://forum.xda-developers.com/nexus-6/general/nexus-6-index-thread-t3229412
It has a newbie guide that literally holds your hand through the whole process. Post 2 has info on "how to flash factory images", use method 2 as method 1 in that thread will not work with the MM factory image.
Nice people have already spend a lot of time and effort documenting these things for you, as they are common questions. People like Simms and the other posters in this thread answer questions and offer support for free out of the kindness of their heart... Don't create extra work for them by ignoring all the effort already put out by other members, expecting it all to be regurgitated to you.
Fastboot, as described in the threads mentioned above, will completely overwrite the pertinent partitions, regardless of what was there... dev build or not. No need to flash and apply countless incremental updates. Google provides not only full system images, but the information to use them on their web page...
Click to expand...
Click to collapse
i have absolutely no computer nor laptop access, so i completely understand(understood) his side as well.
scryan said:
You act like I was born with a nexus 6... It was a new phone to me too. I was so excited I read as much as I could on it, thanking the people who were so gracious to spend their personal time writing guides so I could understand the process well enough to be comfortable with my phone and help others here.
Click to expand...
Click to collapse
He googled his build number and didn't get many hits on it. So he's asking if there's a way to get it up and running tonight without a computer. Seems valid to me. You jump into the thread offering no help at all and start talking **** about the guy. That's the exact opposite of what you're saying you strive to do. I don't get it.
simms22 said:
i have absolutely no computer nor laptop access, so i completely understand(understood) his side as well.
Click to expand...
Click to collapse
At that point its a legitamate question. This is a very different situation that is not well covered here, and requires a unique solution not many would come up with.
But "I absolutely have no computer nor laptop access" is pretty different then "I can access one TOMORROW. Sheesh, having something 1 day away is pretty far from it not being a possibility.
And I think you would agree it would be a significantly better idea to wait that day then to proceed with the method you gave (not that it was bad of you to give it... but you tried to differentiate and he held out to avoid being told to do it the hard way)
|Jason8| said:
He googled his build number and didn't get many hits on it. So he's asking if there's a way to get it up and running tonight without a computer. Seems valid to me. You jump into the thread offering no help at all and start talking **** about the guy. That's the exact opposite of what you're saying you strive to do. I don't get it.
Click to expand...
Click to collapse
We are told time and time again that their are no bad questions. Truth is there are more bad questions then good ones.
Him asking about a build that provides few google hits is very legitimate.
Him asking about doing it without a computer because he doesn't have one is legitimate.
It only becomes an issue when he doesn't get the answer he wants, and all of a sudden he does have computer access.
And given that he is going to proceed in a computer... It becomes nothing more then "How do I update my phone?", which is VERY well documented.
I not only gave him the link to the information he needed, AND even corrected the information pointing out that the flashall script fails and that he would need to use the second method listed in the instructions I linked him to (since I know he will likely have limited time to fail and figure out whats wrong)
"That's the exact opposite of what you're saying you strive to do. I don't get it."
Then let me explain.
Would you skip your homework, ignore your textbook, then show up to class asking your teacher to explain it again? We are here to help... but how or why should I care more about it then he does? With no attempt made to learn, how much should I care to teach him?
Its a pretty big **** you to all those who have spend countless hours documenting this stuff to help new people to ignore their work and tell someone to do it again.

Still waiting for Marshmallow...

I still haven't received the OTA and Marshmallow update, and am starting to wonder if something is wrong with my device.
I'm in England, my N6 is unlocked, my SIM is "3".
Is anyone else here still waiting for Marshmallow? Or can anyone offer any advice, please?
Unlocked and 100% stock?
danarama said:
Unlocked and 100% stock?
Click to expand...
Click to collapse
I'm sorry, I don't understand your response. The answer to my question was not mentioned in the opening posts of the thread I posted in, which is why I posted!! Are you saying I missed a thread? In which case my apologies, and I would be grateful to know which thread that is. Otherwise I don't understand what you're trying to tell me.
AidanBell said:
I'm sorry, I don't understand your response. The answer to my question was not mentioned in the opening posts of the thread I posted in, which is why I posted!! Are you saying I missed a thread? In which case my apologies, and I would be grateful to know which thread that is. Otherwise I don't understand what you're trying to tell me.
Click to expand...
Click to collapse
You said your phone was unlocked. I am asking if it is 100% stock? Stock means unmodified.
danarama said:
You said your phone was unlocked. I am asking if it is 100% stock? Stock means unmodified.
Click to expand...
Click to collapse
I do apologise. Your signature about XDA mantras was so huge that I actually missed your question above it!!
The answer is yes, it's 100% stock, unmodified. The only thing that may be pertinent is that I'm on the Marshmallow developers preview. I've had all three previews; numbers two and three came across over the air perfectly. There's just no sign now of the official build.
AidanBell said:
I do apologise. Your signature about XDA mantras was so huge that I actually missed your question above it!!
The answer is yes, it's 100% stock, unmodified. The only thing that may be pertinent is that I'm on the Marshmallow developers preview. I've had all three previews; numbers two and three came across over the air perfectly. There's just no sign now of the official build.
Click to expand...
Click to collapse
Preview doesn't get official build OTA's
You'll have to flash the stock system and boot.img of the official build
danarama said:
Preview doesn't get official build OTA's
You'll have to flash the stock system and boot.img of the official build
Click to expand...
Click to collapse
Oh, I never knew that. Thank you very much.
This is a pig for me, then, as I don't have much experience in flashing and was hoping very much not to have too. However, that appears to be my only option, therefore can anyone please point me in the direction of a step-by-step guide for flashing Marshmallow onto a Nexus 6 (including making sure I choose the right version in the first place!)?
AidanBell said:
This is a pig for me, then, as I don't have much experience in flashing and was hoping very much not to have too. However, that appears to be my only option, therefore can anyone please point me in the direction of a step-by-step guide for flashing Marshmallow onto a Nexus 6 (including making sure I choose the right version in the first place!)?
Click to expand...
Click to collapse
The same way you got the dev preview on there I guess.
See the first post at http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008 In step 5, use Method 2
AidanBell said:
This is a pig for me, then, as I don't have much experience in flashing and was hoping very much not to have too. However, that appears to be my only option, therefore can anyone please point me in the direction of a step-by-step guide for flashing Marshmallow onto a Nexus 6 (including making sure I choose the right version in the first place!)?
Click to expand...
Click to collapse
Did you actually buy your phone with M Preview?
AidanBell said:
This is a pig for me, then, as I don't have much experience in flashing and was hoping very much not to have too. However, that appears to be my only option, therefore can anyone please point me in the direction of a step-by-step guide for flashing Marshmallow onto a Nexus 6 (including making sure I choose the right version in the first place!)?
Click to expand...
Click to collapse
Just fastboot flash the system and boot images.
Go to Nexus 6 General > Sticky roll-up thread > adb and fastboot. What is it?
This will tell you how to set up fastboot and what it is (and how to use it.). Then flash the system.img and boot.img
AidanBell said:
I'm sorry, I don't understand your response. The answer to my question was not mentioned in the opening posts of the thread I posted in, which is why I posted!! Are you saying I missed a thread? In which case my apologies, and I would be grateful to know which thread that is. Otherwise I don't understand what you're trying to tell me.
Click to expand...
Click to collapse
Nah, that's his big sig, The message is one line, the sig is many lines and huge font
aiiee said:
Nah, that's his big sig, The message is one line, the sig is many lines and huge font
Click to expand...
Click to collapse
Huge for a good reason
danarama said:
Huge for a good reason
Click to expand...
Click to collapse
Many thanks for the help and comments, guys.
Yes, I bought the phone from the Phones Show Chat forum. So it was the previous owner who flashed the first preview build, not me.
I guess I have no choice, then, but to have a go at flashing the official build.
I'm not a complete newbie or an idiot, I'm confident that I can do it, but I would have preferred a step-by-step guide that doesn't presume any prior knowledge or experience. The one recommended by Jj14 still assumes a little too much for my liking. If I step a single foot off the correct path, I'll have no idea how to recover. If anyone can recommend another, safer, version I'd be most grateful.
AidanBell said:
I'm not a complete newbie or an idiot, I'm confident that I can do it, but I would have preferred a step-by-step guide that doesn't presume any prior knowledge or experience. The one recommended by Jj14 still assumes a little too much for my liking. If I step a single foot off the correct path, I'll have no idea how to recover. If anyone can recommend another, safer, version I'd be most grateful.
Click to expand...
Click to collapse
You can find the factory images here: https://developers.google.com/android/nexus/images?hl=en#shamu
There are the instructions how to flash it, but ignore the last step of locking the bootloader. If something goes wrong, and can't boot it, you can have a nice brick in your hands.
Save all your data! The flashing process will wipe it completely.
There's not magic needed, just fastboot. Turn your phone off, press down and power, until the "Fastboot flash mode" screen comes up. Then follow the instructions.
A couple of things explained:
1. The bootloader for the M preview and MRA58K were the same, but the MRA58N one might be new. I didn't try it.
2. if you unpack the "flash all" zip file, you can do the flashing by hand yourself, you can skip userdata if you don't want your device fully wiped, but then you must do a factory reset.
And if something is not clear, please feel free to ask anything. It's better to be sure than being modest and have a nice brick.
Edit: The bootloaders are the same bit for bit as the preview.
And the three official packages 58k, 58n, and 58r have the same radios.
58n is the security patch it is noted in the AOSP source too, and nobody knows what 58r is, but it can be for Verizon. But I'm not sure.
Continued thanks.
Still very nervous and somewhat out of my depth, but here goes nothing.
And ... fell at the first hurdle!
Can someone please tell me which version I need; "MRA58K", "MRA58N" or "MRA58R"?
Always the newest. MRA58K was the first Marshmallow factory image. MRA58N is the 1st November securty update, and so far nobody knows what 58R is. People are guessing here:
http://forum.xda-developers.com/nexus-6/help/mra58r-build-t3242328
I found this excellent step-by-step guide, and followed it carefully. Result ... I now have official Marshmallow.
http://www.digitaltrends.com/mobile/how-to-install-android-factory-image
So, I recommend that page to anyone else who, like me, needs a guiding hand. And I thank very much everyone in this thread for your help and encouragement.
Cheers,
Aidan
I'm stuck on LVY48I ( 5.1.1 )
don't know why it's too long to get the update !!
My Nexus totally stock.

Going from DRL6 to CRK1

Hey there, I decided to try out the beta but I'm looking to revert to stock Oreo so I can get Pie through OTA. However I have no clue how to do it, I've read a couple threads referencing this but I can't seem to piece together what needs to be done.
Would someone be so kind to post step by step instructions on what I need to do? I'm pretty techy so just basic instructions would be a great help. Thanks and have a great day!
Spectrah said:
Hey there, I decided to try out the beta but I'm looking to revert to stock Oreo so I can get Pie through OTA. However I have no clue how to do it, I've read a couple threads referencing this but I can't seem to piece together what needs to be done.
Would someone be so kind to post step by step instructions on what I need to do? I'm pretty techy so just basic instructions would be a great help. Thanks and have a great day!
Click to expand...
Click to collapse
Download CRK1 with the SamFirm tool
Flash it with patched ODIN 3.13.1
Spectrah said:
Hey there, I decided to try out the beta but I'm looking to revert to stock Oreo so I can get Pie through OTA. However I have no clue how to do it, I've read a couple threads referencing this but I can't seem to piece together what needs to be done.
Would someone be so kind to post step by step instructions on what I need to do? I'm pretty techy so just basic instructions would be a great help. Thanks and have a great day!
Click to expand...
Click to collapse
Download this firmware crk1 from here https://androidfilehost.com/?fid=11410963190603879881 extract the files and you'll see inside of the extracted folder more files that have .md5 on the end of them right click on the files and click rename and just delete the .md5 part only and leave it so it still has the .tar on the end then use the REGULAR NEWEST version of Odin NOT the patched one and then load the files in their respective places AP to AP, BL to BL etc. etc. Then just flash it to the phone while the phone is in download mode and after the successful flash boot into recovery mode and select factory reset so everything is the way it's supposed to be.... Finished!
I really appreciate the help! I'm a bit confused because Mr. Orange is saying use patched ODIN but MrMike is saying not patched version. I'm not sure which version to use then.
Spectrah said:
I really appreciate the help! I'm a bit confused because Mr. Orange is saying use patched ODIN but MrMike is saying not patched version. I'm not sure which version to use then.
Click to expand...
Click to collapse
The patched one may not work and you'll be forced to start over.. The newest version of odin is for the newer bootloader versions and the patched one isn't updated for the newer bootloader versions but you can try it if you want if it doesn't work then start over.
MrMike2182 said:
The patched one may not work and you'll be forced to start over.. The newest version of odin is for the newer bootloader versions and the patched one isn't updated for the newer bootloader versions but you can try it if you want if it doesn't work then start over.
Click to expand...
Click to collapse
Hmm, is there any advantage to using the parched version? It sounds like there's an official version that will get me the desired results from what you're saying.
Spectrah said:
Hmm, is there any advantage to using the parched version? It sounds like there's an official version that will get me the desired results from what you're saying.
Click to expand...
Click to collapse
The patched version is usually used to switch from N950U to N950U1 or the other way.. I would just use the official version if I were you because I ALREADY flashed from 5DRL7 back to N950USQS5CRK1 and it's working perfectly.. But if you want to mess with the patched version you can but like I said if it doesn't work then you have to start over.
MrMike2182 said:
The patched version is usually used to switch from N950U to N950U1 or the other way.. I would just use the official version if I were you because I ALREADY flashed from 5DRL7 back to N950USQS5CRK1 and it's working perfectly.. But if you want to mess with the patched version you can but like I said if it doesn't work then you have to start over.
Click to expand...
Click to collapse
I'm gonna use the patched version, thanks so much for all of your help!
Spectrah said:
I'm gonna use the patched version, thanks so much for all of your help!
Click to expand...
Click to collapse
Must be something wrong with you obviously.. You go and ask for help and then the person who gives you the most details on how to do it and you'd rather listen to someone who gave you a one line answer. LMAO. Actually this is probably my own fault because I should have known better that when someone asks for step by step instructions basically asking someone to hold their hand through the process that they're a problem..
I used the patched version and it works perfectly on the N950U.
Mr. Orange 645 said:
I used the patched version and it works perfectly on the N950U.
Click to expand...
Click to collapse
Well others in the other thread complained that it didn't work but that's why I said it may or may not work I didn't outright say it doesn't work.
MrMike2182 said:
Well others in the other thread complained that it didn't work but that's why I said it may or may not work I didn't outright say it doesn't work.
Click to expand...
Click to collapse
I never said you did. Is there a particular reason you're being so confrontational and taking things so personal? You just bit the OP's head off and called him "a problem," because he didn't take your advice exactly. I didn't even mention you, quote, or refer to you. I was just sharing my experience, yet you jump on and defend yourself. Try to realax a little and have fun.
Mr. Orange 645 said:
I never said you did. Is there a particular reason you're being so confrontational and taking things so personal? You just bit the OP's head off and called him "a problem," because he didn't take your advice exactly. I didn't even mention you, quote, or refer to you. I was just sharing my experience, yet you jump on and defend yourself. Try to realax a little and have fun.
Click to expand...
Click to collapse
That's because too many folks on here want someone to hold their hand through the entire process instead of actually spending the time to learn how to do it on their own and then when you go spend your time to give them the best answers so they don't waste their time running into possible problems that others have stated that they did and then person just decides to go do the opposite then it's like what did you even ask for help for then? I agree that I was a bit of a jerk but that's from constantly dealing with that on here.
MrMike2182 said:
Must be something wrong with you obviously.. You go and ask for help and then the person who gives you the most details on how to do it and you'd rather listen to someone who gave you a one line answer. LMAO. Actually this is probably my own fault because I should have known better that when someone asks for step by step instructions basically asking someone to hold their hand through the process that they're a problem..
Click to expand...
Click to collapse
Unfortunately that was a typo and I meant the non patched version. Obviously you went above and beyond in making sure I was prepared and I really appreciate that. Sorry about the confusion.

Categories

Resources