Hello,
I tried to install the NostromoPop 2.1.2 ROM. Using fastboot I installed TWRP 2.7.x. I could boot it, but I did not work. I realized I downloaded the wrong version, so I downloaded 2.8.7.0 It was flashed but with "volume up" and "power" it won't start. My stock recovery starts immediately.
Any advices???
fall-out said:
Hello,
I tried to install the NostromoPop 2.1.2 ROM. Using fastboot I installed TWRP 2.7.x. I could boot it, but I did not work. I realized I downloaded the wrong version, so I downloaded 2.8.7.0 It was flashed but with "volume up" and "power" it won't start. My stock recovery starts immediately.
Any advices???
Click to expand...
Click to collapse
if stock recovery comes up then the flash failed. make sure you read the text in cmd.
did you unlock bootloader?
I follwed the guide for the CM. Everything worked so far.
I recieved no error message after flashing.
I can boot into recovery with the adb console, but still not with the power und volume buttons. Strang...
Ok, just installed Android 5.1.1. Works great on the Mini 2. HTC? No more! My next mobile will be a google phone!
Related
I installed the TWRP Backup of Lollipop 5.0 when it came out on these forums, and later i flashed Phils CWM Recovery to flash the zip back to stock 4.4.4
Now i just flashed stock recovery so i can finally install the OTA for Lollipop 5.0.2 that just came out.
It flashed ok, without errors, but when i select to open recovery (Vol UP), it just gets stuck on the little robot with a red triangle on it, like it usually does before entering recovery, but it just stays there and eventually reboot into system normally.
Any ideas why that might be happening? I already had noticed that issue after i installed the TWRP backup, but since i flashed Phils CWM and it was working perfectly, i never bothered checking that out.
Its the final step so i can install the so long awaited OTA.
Any help would be greatly appreciated.
Thanks in advance.
guguts said:
I installed the TWRP Backup of Lollipop 5.0 when it came out on these forums, and later i flashed Phils CWM Recovery to flash the zip back to stock 4.4.4
Now i just flashed stock recovery so i can finally install the OTA for Lollipop 5.0.2 that just came out.
It flashed ok, without errors, but when i select to open recovery (Vol UP), it just gets stuck on the little robot with a red triangle on it, like it usually does before entering recovery, but it just stays there and eventually reboot into system normally.
Any ideas why that might be happening? I already had noticed that issue after i installed the TWRP backup, but since i flashed Phils CWM and it was working perfectly, i never bothered checking that out.
Its the final step so i can install the so long awaited OTA.
Any help would be greatly appreciated.
Thanks in advance.
Click to expand...
Click to collapse
at robot with triangle
in 4.4.4 recovery hold vol up and tap power
in 5.0.x recovery hold power and tap vol up
should enter to stock recovery
Hello,
I've got a HTC One which is having trouble. When I flash teh latest TWRP or CWM recovery it says ''Entering Recovery'' goes black screen then goes back to Entering Recovery''. But when I install the old version of TWRP it works??
Anyway... I've deleted everything via TRWP by mistake so I've no ROM installed. I'm trying to push the zip but no luck, so I'm wondering If I can flash a ROM via ''Fastboot'' instead of installing through ''Recovery''
morgan150 said:
Hello,
I've got a HTC One which is having trouble. When I flash teh latest TWRP or CWM recovery it says ''Entering Recovery'' goes black screen then goes back to Entering Recovery''. But when I install the old version of TWRP it works??
Anyway... I've deleted everything via TRWP by mistake so I've no ROM installed. I'm trying to push the zip but no luck, so I'm wondering If I can flash a ROM via ''Fastboot'' instead of installing through ''Recovery''
Click to expand...
Click to collapse
You can't flash a rom from fastboot, only in recovery mode. The only thing you can flash in fastboot mode are RUU, Firmware and recovery.
What os the recovery version that was booting fine? What version of TWRP are you trying to install now? What rom do you want to flash? Do you have erased cache and rebooted the bootloaded after flashing the recovery?
Hi all,
I'm trying to install Cyanogenmod following techbeasts.com tutorial but I'm stuck at the first step : installingTWRP (or CWM).
I followed precisely all the instructions (I allow debugging mode, I installed samsung drivers, I start the phone in download mode, I connect it with OEM cable, I start Odin, it sees the phone, I select the tar.md5 file.), Odin confirms it went well (green box writing "PASS"), but when I try to boot the recovery mode by holding Volume up + Home + Power it seems to boot another recovery software that doesn't offer a backup or a flashing options: "Android system recovery <3e>"
Can't get it to run TWRP or CWM... Can't install the supersu package.
What I'm I doing wrong? Can someone help?
Try to untick Auto Reboot option from odin. I had similiar issues and reason was if you have updated your phone with OTA-updates then it installs some kind of backup script. When your phone boots again after you had installed twrp it installs stock recovery during boot. So untick autoreboot, flash twrp and force boot straight to recovery without letting phone boot to OS. You can also try to pull battery out, put it back and then boot into recovery mode.
Sorry my english and try to understand.
adbhitman said:
Try to untick Auto Reboot option from odin. I had similiar issues and reason was if you have updated your phone with OTA-updates then it installs some kind of backup script. When your phone boots again after you had installed twrp it installs stock recovery during boot. So untick autoreboot, flash twrp and force boot straight to recovery without letting phone boot to OS. You can also try to pull battery out, put it back and then boot into recovery mode.
Sorry my english and try to understand.
Click to expand...
Click to collapse
Great it worked, thanks a lot !
But now I'm stuck on the next step : flashing CM11
I rooted my phone, booted TWRP, chose "install>cm11" (the zip downloaded from nova fusion) but it says "failed" after a few sec...
I would post my TWRP log but the forum prevents me doing so...
Well I get few things that you could check first.
1. Do factory reset for example from twrp. Factory reset is needed/recommended before installing custom rom from offical OS.
2. Sometimes just installing fails almost immediately if you have ticked check zip signature.
After you have installed new rom clear cache and davilk cache just in case. I'll do that every time if I install or update custom roms. Also don't forget to install right gapps package after you have installed rom.
Sorry my english and try to understand.
ok just realized i downloaded the wrong cm image (the odin one, not the recovery)
everything running smooth now
Okay happy to hear that everything is fine now. Happy playing with custom roms
I was on stock ROM and had my bootloader unlocked
I flashed the latest TWRP on my XSP
Then on booting into recovery I wiped data/cache/dalvik cache and then installed AICP with the GApps
after installing when i chose reboot it asked me whether to install superuser I clicked no and rebooted
And now even on normal booting it goes into TWRP
even if I try to connect to my laptop in fastboot mode it is booting up into TWRP
basically no matter what button i press, It is booting up into TWRP
I have installed the latest TWRP available
I even tried the hard seret but again it goes into TWRP
AnishK said:
I was on stock ROM and had my bootloader unlocked
I flashed the latest TWRP on my XSP
Then on booting into recovery I wiped data/cache/dalvik cache and then installed AICP with the GApps
after installing when i chose reboot it asked me whether to install superuser I clicked no and rebooted
And now even on normal booting it goes into TWRP
even if I try to connect to my laptop in fastboot mode it is booting up into TWRP
basically no matter what button i press, It is booting up into TWRP
I have installed the latest TWRP available
I even tried the hard seret but again it goes into TWRP
Click to expand...
Click to collapse
Flash tangerine and see if the problem is solved.
If not,
Do a full wipe again, flash ROM, then tangerine, then GApps.
AnishK said:
I was on stock ROM and had my bootloader unlocked
I flashed the latest TWRP on my XSP
Then on booting into recovery I wiped data/cache/dalvik cache and then installed AICP with the GApps
after installing when i chose reboot it asked me whether to install superuser I clicked no and rebooted
And now even on normal booting it goes into TWRP
even if I try to connect to my laptop in fastboot mode it is booting up into TWRP
basically no matter what button i press, It is booting up into TWRP
I have installed the latest TWRP available
I even tried the hard seret but again it goes into TWRP
Click to expand...
Click to collapse
Hello. This problem is really weird. May I know where did you learned to flash the TWRP recovery?
Also what is the current state of your bootloader?
In the meantime, you can try out my Stock Components as Flashable ZIPs to flash. Read the OP carefully and only choose FOTAkernel component.
Flash it through your TWRP. Shut down the phone (Main Menu > Reboot > Power off) and try to fastboot.
Zenith said:
Flash tangerine and see if the problem is solved.
If not,
Do a full wipe again, flash ROM, then tangerine, then GApps.
Click to expand...
Click to collapse
Did a full wipe, flashed ROM, then tangerine, then GApps..
Rebooted the phone
And no response
It just vibrated as always when it turns on but the screen didn't even turned on.
TechnoSparks said:
Hello. This problem is really weird. May I know where did you learned to flash the TWRP recovery?
Also what is the current state of your bootloader?
In the meantime, you can try out my Stock Components as Flashable ZIPs to flash. Read the OP carefully and only choose FOTAkernel component.
Flash it through your TWRP. Shut down the phone (Main Menu > Reboot > Power off) and try to fastboot.
Click to expand...
Click to collapse
I flashed the TWRP using flashtool on my laptop
And currently my bootloader in unlocked
AnishK said:
Did a full wipe, flashed ROM, then tangerine, then GApps..
Rebooted the phone
And no response
It just vibrated as always when it turns on but the screen didn't even turned on.
Click to expand...
Click to collapse
Seems to be an unusual problem.
Try flashing stock again.
AnishK said:
I flashed the TWRP using flashtool on my laptop
And currently my bootloader in unlocked
Click to expand...
Click to collapse
Please try to flash stock ROM again.
Zenith said:
Seems to be an unusual problem.
Try flashing stock again.
Click to expand...
Click to collapse
Yeah.. Flashed stock Rom again..
But before it i tried installing some other Rom's.. other than AICP..
it was successful for resurrection remix and stryflex..
but again when i used to flash TWRP it again used to start booting into recovery..
Might be some problem with the recovery.. Didn't try any other recovery though..
AnishK said:
Yeah.. Flashed stock Rom again..
But before it i tried installing some other Rom's.. other than AICP..
it was successful for resurrection remix and stryflex..
but again when i used to flash TWRP it again used to start booting into recovery..
Might be some problem with the recovery.. Didn't try any other recovery though..
Click to expand...
Click to collapse
I'm not sure which TWRP you installed,
but this is an updated one and it works perfectly. It won't get deleted even if you change ROMs.
Flash the fotakernel of your device from the link provided by TechnoSparks in post#3.
Then flash TWRP.
Zenith said:
I'm not sure which TWRP you installed,
but this is an updated one and it works perfectly. It won't get deleted even if you change ROMs.
Flash the fotakernel of your device from the link provided by TechnoSparks in post#3.
Then flash TWRP.
Click to expand...
Click to collapse
I had installed the latest TWRP..
No idea why this happened..
I will try installing fotakernel and then TWRP..
I currently have PacMan rom 4.4.4 KitKat installed on my Moto X and when I went to update to a new rom I found that TWRP didn't work. I can boot into recovery mode, but the splash screen just displays and never actually enters the recovery. I have to hold the power button down until the phone reboots to get out of it. I currently have TWRP v2.8.7.0 installed. I tried some of the older versions of TWRP and none worked. I also tried updating to the unoffical TWRP 3.0.2 and that behaved the same. Lastly, I tried Philz CWM recovery v6.57.9. That loaded and I was able to navigate the menu but once I selected a option that performed a task, it would freeze. If anyone can help me out it'd be greatly appreciated. Thanks
frew415 said:
I currently have PacMan rom 4.4.4 KitKat installed on my Moto X and when I went to update to a new rom I found that TWRP didn't work. I can boot into recovery mode, but the splash screen just displays and never actually enters the recovery. I have to hold the power button down until the phone reboots to get out of it. I currently have TWRP v2.8.7.0 installed. I tried some of the older versions of TWRP and none worked. I also tried updating to the unoffical TWRP 3.0.2 and that behaved the same. Lastly, I tried Philz CWM recovery v6.57.9. That loaded and I was able to navigate the menu but once I selected a option that performed a task, it would freeze. If anyone can help me out it'd be greatly appreciated. Thanks
Click to expand...
Click to collapse
Had a similar problem on my XT1060 Dev Ed., lost all my data coz of it. Only method which worked was to flash a stock firmware via RSDlite or manually through mfastboot.
Try option 5 from here with complete data wipe.
Try to go to bootloader first and load it from there. Already saw this working some times.
Sent from my XT1052 using XDA Free mobile app
varunpilankar said:
Had a similar problem on my XT1060 Dev Ed., lost all my data coz of it. Only method which worked was to flash a stock firmware via RSDlite or manually through mfastboot.
Try option 5 from here with complete data wipe.
Click to expand...
Click to collapse
This worked perfectly, thanks.