Hello
i have an Indian galaxy tab 7 p1000
recently i flashed it with gingerbread unoficially
now i need to flash it with stock rom for gingerbread in India
edit 1: It had p1000ddjm2
edit 2: Multiupload is dead so all links are too
edit 3: DDJPA You can download it from http://db.tt/E5bdK66R
edit 4: due to generating excessive traffic dropbox has disabled my public links. post your mail ids if you want it i will add it to shared dropbox folder
Same problem here.
Anybody please help.
TIA
Sent from my GT-P1000 using XDA App
CHECK, you will get your 'p1000ddjm2', flash with 'Odin', try rooting and change to Indian CSC (search..!) and Kies should update automatically...
Samsung galaxy tab 7" in India gets Gingerbread.
after installing DDJM2 kies goes into connecting loop
new firmware DDJPA 2.3.3 has to be manually flashed
hex007 said:
Samsung galaxy tab 7" in India gets Gingerbread.
after installing DDJM2 kies goes into connecting loop
new firmware DDJPA 2.3.3 has to be manually flashed
Click to expand...
Click to collapse
where can i get the DDJPA 2.3.3 flash files?
illuminatus01 said:
where can i get the DDJPA 2.3.3 flash files?
Click to expand...
Click to collapse
Does your phone get recognized by Kies you should be able to do it
Only if you have flashed another rom do you have to do it manually
First know how to use odin.
DDJPA 2.3.3 : Links in OP
hex007 said:
Does your phone get recognized by Kies you should be able to do it
Only if you have flashed another rom do you have to do it manually
First know how to use odin.
Click to expand...
Click to collapse
yeah have used odin before. my problem was exactly the same as yours. after using overcome for a while, used odin to get back to DDJM2. but after that kies wont recognise my tab anymore and enters connecting loop.
the flash files were exactly what i needed. thanks a lot
hex007 said:
First know how to use odin.
Click to expand...
Click to collapse
there's another thing I need to know before i flash. it looks like the modem.bin and CSC files are contained in a single file in the DDJPA flash file you posted above. does this mean i do not need to specify the 'CSC' and 'phone' files in ODIN? I mean, specifying only the 'PDA' file on ODIN will be sufficient,right?
illuminatus01 said:
specifying only the 'PDA' file on ODIN will be sufficient
Click to expand...
Click to collapse
specifying only the 'PDA' file on ODIN will be sufficient
updated successfully.
I have installed latest version of Kies. my tab(Froyo2.2, Rooted only ) gets connected well and shows all files n everything. But I am still not getting the notification for Firmware update? I am from Mumbai area. do I have to keep Kies window open and running all the time?? how does it work?
kevingtab said:
I am from Mumbai area. how does it work?
Click to expand...
Click to collapse
i am from mumbai too .
if you have rooted your device you have probably made your warranty void.
if you know how to use Odin i would recommend you to flash 2.3.3 DDJPA manually
DDJPA-----> http://www.multiupload.com/E3Y46J67TD
Odin-------> http://www.multiupload.com/IU9CEI3CHU
first know how to use odin and then try
hex007
Hey i'm from Pune and flash this firmware....
i want to know how to root,
How to convert to ext4,
how to add superuser,
CWM Manager and busy box in this firmware do u have any link.....
Thank you so much....
thakarparth said:
Hey i'm from Pune and flash this firmware....
i want to know how to root,
how to add superuser,
CWM Manager and busy box in this firmware do u have any link.....
Click to expand...
Click to collapse
cfroot ------> http://www.multiupload.com/89LRLTIPLL
flash this for root cwm and bb
Ya..But yesterday I finally got the notification and got my Tab updated to Gingerbread.. Had to root it again for making some apps like ROM Manager, Root Explorer work..(used ODIN 1.7 and help from Google }
Observations : NFS Shift does not work..the screen goes off after EA logo..
The RAM utilized is always more than 300MB even in Flight mode,..(using ADW launcher) Even if try to kill running apps, the max i get is 290 MB utilized RAM..
E-book and Daily Briefing - Missing !!
I updated the firmware with odin 1.7.
But later i found "E-book" and "Daily Briefing" go missing !!
Additionally i see "Music Hub" added in the menu.
Can anyone confirm if the missing apps are absent in firmware or just in my tab as i flashed it over "DXJPI" and didn't flash/reset the device to retain the data.
gurudev32 said:
I updated the firmware with odin 1.7.
But later i found "E-book" and "Daily Briefing" go missing !!
Additionally i see "Music Hub" added in the menu.
Can anyone confirm if the missing apps are absent in firmware or just in my tab as i flashed it over "DXJPI" and didn't flash/reset the device to retain the data.
Click to expand...
Click to collapse
It got it fixed,.
But no Audio/Video support in GTalk
any fix for this ???
dont know abt dxjpi
@hex007
can u confirm if you have Audio/Video support in GTalk or not !
It was not that easy for me. The device was originally from Arab region on which i had managed to load Indian ROM.
GB loaded and Odin gave pass, but again went back to download mode. On a hunch i tried using the old CSC and Modem file and voila it restarted. But then went and got stuck with invalid certificate. Cleared up the cache and hurrah! restarted to Indian GB
Many thanks for the ROM file.
Hello
my tablet P7300 is coming from Poland and the last OTA upgrade was P7300XWKK4.
I'm currently running this version.
I saw an EU version which is P7300XWKL4 from sammobile.
how can i install this version ?
The zip file has 2 files :
P7300XWKL4_P7300XXKJ6_P7300XEUKL1_HOME.tar.md5
SS_DL.dll
Do i have to use odin to do it and how ?
My tab is only rooted and is running the stock recovery
Thanks for your help.
You just need to select the .md5 file in Odin with PDA button. Check the guide, it has all information you need.
Thanks a lot , it worked fine
Flashing the XAC NF1 firmware and it hangs on zimage and then i have to odin back to the original...
My GG is XAR (US)
Think it is just a bad download? OR am I not waiting long enough (5 minutes on zimage)?
EDIT:
Redownloaded and get the same thing in odin - hangs on zimage Do I have to go from NA6 to NE9 then to NF1?
I'm downloading NE9 XAC now... Why don't we have better mirrors... (FASTER)?
EDIT 2:
NE9 Worked fine. Maybe I'll try NF1 now, although I haven't read anything as far as a changelog between the two.
Same happened with me. I stayed on ne9 and rooted so I could remove camera sounds
Sent from my SM-N900V using Tapatalk
Ne9 is a bigger size file and I believe does the conversion from Android to tizen. After installing ne9 you should be able to update to nf1.
SOLVED
Old post but I just went through the same ordeal to be able to install the TizenMod 3 ROM which requires NF1 firmware first.
1. Flash any region NE9, I used V700XXUCNE9 with Odin 3.10
2. Flash any region NF1, I used V700XXUCNF1 with Odin 3.10
Can someone please direct me to a mirror link so i can pull down the firmware and unbick my watch?
rookie247 said:
Can someone please direct me to a mirror link so i can pull down the firmware and unbick my watch?
Click to expand...
Click to collapse
I do not have any mirrors or download sites other than directly from www.sammobile.com - I get them all from there
hopefully someone else will respond with mirrors for you
Good luck,
As the title says, soft bricked my S6 and need the Odin files. The only ones I can find are for OF3 but downgrading on the S6 is impossible.
I could not find those files yet.
i have a t-mobile samsung galaxy s8 stock not rooted. i read that someone had leaked the official oreo build for this phone so i ended up side loading it only to find out it was not official build but a beta build. so now im trying to figure out what i need to do to revert back to bql1. i have downloaded odin3 v3.12.7 and downloaded the bql1 files but not too sure on how to use odin. will using odin void my warranty? and what files do i need to use in odin? i see other instructions to use AP, BL, CP, and the CSC_OYN but not the HOME_CSC_OYN and nothing for the user data file. whats the difference in those files and why not use the HOME_CSC_OYN? thanks for the help!!