Related
I am looking for a ROM that has a nice theme, and is cleared of the Built-in apps that came with the stock OS.
I've tried ReVolutionMod 3.1, but cannot get wifi to work
I also see that CM10 does not have wifi support (because HTC hasn't released source for the driver, or the driver itself?)
I am a little confused about this phone because I thought it had an ICS stock distribution, however mine came with Eclair I beleive.
Could I be pointed to the working ROMS?
Thank you
jameh said:
I am looking for a ROM that has a nice theme, and is cleared of the Built-in apps that came with the stock OS.
I've tried ReVolutionMod 3.1, but cannot get wifi to work
I also see that CM10 does not have wifi support (because HTC hasn't released source for the driver, or the driver itself?)
I am a little confused about this phone because I thought it had an ICS stock distribution, however mine came with Eclair I beleive.
Could I be pointed to the working ROMS?
Thank you
Click to expand...
Click to collapse
The working roms are the ones that are based on ICS with or without sense.
HTC hasn't released the source code for the driver.
The desire C is retailed with ICS, as far as I know there haven't been android 2.2 Desire C's.
WiFi should be working flawlessly on your device, although you can try posting a logcat maybe some of the devs could point you to the solution.
I'll take a look at it if you are willing to post it here and see if i could figure out the problem.
Just install a custom kernel like the Prometheus in my signature. Then wifi should work with the Revolution Rom !
I'm not sure what happened with ReVolution, but I was getting "Error" in the little wifi widget persistently, and wasn't able to connect. Sorry I didn't get a logcat for it.
I ended up flashing Slim-Sense-v1, which I'm not sure is the best choice, but it seems stable for now.
Is there a good directory of these ROMS that is kept up-to-date? It seems very scattered and sparse over these forums and other sites for this phone.
Just download one click tool ( however) and put kernel in kernel folder then click boot to bootloader and click flash kernel and WiFi should work.
Sent from my HTC Desire C using xda app-developers app
BOOT.IMG
You have to flash the boot.img included inside the rom...The one which is in root of the folder that is of 800 mhz and if your phone gets in bootloops with that just go in folder named Kernels and then flash any of the 2 kernels then your phone should boot up and WiFi should work
Hit THANKS IF I HELPED YOU
LaKsHaY1997 said:
You have to flash the boot.img included inside the rom...The one which is in root of the folder that is of 800 mhz and if your phone gets in bootloops with that just go in folder named Kernels and then flash any of the 2 kernels then your phone should boot up and WiFi should work
Hit THANKS IF I HELPED YOU
Click to expand...
Click to collapse
I have tried all the three boot.img files of nameless 7.2.4 rom. The one clocked at 800MHz does not boot. The two others boot the device, but still wi-fi error.
I tried also the boot image of revolutionmodv.3.5. It even does not boot the device (bootloop at htc logo).
dr.pythagora said:
I have tried all the three boot.img files of nameless 7.2.4 rom. The one clocked at 800MHz does not boot. The two others boot the device, but still wi-fi error.
I tried also the boot image of revolutionmodv.3.5. It even does not boot the device (bootloop at htc logo).
Click to expand...
Click to collapse
You still having problems ?
Hers a link to my dropbox with the stock boot.img stock boot.img
whoamigriffiths said:
You still having problems ?
Hers a link to my dropbox with the stock boot.img stock boot.img
Click to expand...
Click to collapse
Thanks man. I tried it, and many others before. None of them solves wi-fi erro with my stock rom.
I do have a handset from Virgin Canada. Does it make sense that the boot.img should come from the stock of Virgin?
dr.pythagora said:
Thanks man. I tried it, and many others before. None of them solves wi-fi erro with my stock rom.
I do have a handset from Virgin Canada. Does it make sense that the boot.img should come from the stock of Virgin?
Click to expand...
Click to collapse
I have no idea if virgin canada is the issue but heres a link to a canadian rom . In that thread is another link for a rom .canadian rom I guess you need to see if there is a boot.img in there that will help .
What we have kinda seen on here is most wifi issues are solely boot.img issues.
Can you have to appreciate I'm at best clueless and and worst dangerous rofl.
Hopefully , just hopefully one of the guys with the knowledge will see my spammage in this section and come to our rescue lol
hope you can get this sorted . I'll pop by in a couple of hours and if you,ve had no luck I'll pm a few of the guys to pop into the thread
all the best rich
whoamigriffiths said:
I have no idea if virgin canada is the issue but heres a link to a canadian rom . In that thread is another link for a rom .canadian rom I guess you need to see if there is a boot.img in there that will help .
What we have kinda seen on here is most wifi issues are solely boot.img issues.
Can you have to appreciate I'm at best clueless and and worst dangerous rofl.
Hopefully , just hopefully one of the guys with the knowledge will see my spammage in this section and come to our rescue lol
hope you can get this sorted . I'll pop by in a couple of hours and if you,ve had no luck I'll pm a few of the guys to pop into the thread
all the best rich
Click to expand...
Click to collapse
Thanks man. Much appreciated your help.
I just thought that the origin of boot.img may help - but I'm not the expert
The link to the canadian stock rom is broken - the file has been removed.
jameh said:
I'm not sure what happened with ReVolution, but I was getting "Error" in the little wifi widget persistently, and wasn't able to connect. Sorry I didn't get a logcat for it.
I ended up flashing Slim-Sense-v1, which I'm not sure is the best choice, but it seems stable for now.
Is there a good directory of these ROMS that is kept up-to-date? It seems very scattered and sparse over these forums and other sites for this phone.
Click to expand...
Click to collapse
hey flash stock kernel.........i have same problem....bt in my device bluetooth wont work....bt after flashing stock kernel...my problem solved
aarsh009 said:
hey flash stock kernel.........i have same problem....bt in my device bluetooth wont work....bt after flashing stock kernel...my problem solved
Click to expand...
Click to collapse
Don't flash stock kernel they have some version check thingy.....Flash prometheus Kernel by Nikhil ....V7 is the newest one
http://forum.xda-developers.com/showthread.php?t=2192750
Why did you even revive this if the problem was resolved?
RestlessScreams said:
Just install a custom kernel like the Prometheus in my signature. Then wifi should work with the Revolution Rom !
Click to expand...
Click to collapse
have you install cm10 build3 on desire c? does it work stable?
For sure. I'm even running SlimBean and besides the provider bug it works perfectly
NO SENSE Rom
Hi! Am planning to change my 7.2 Nameless Rom. I was thinking to update it for a newer version but before i would do so i would like to try a rom without SENSE. Is it possible to find and download one? I tried to find without any success. Does it exist one at all?
Thanx!!!
levyhuba said:
Hi! Am planning to change my 7.2 Nameless Rom. I was thinking to update it for a newer version but before i would do so i would like to try a rom without SENSE. Is it possible to find and download one? I tried to find without any success. Does it exist one at all?
Thanx!!!
Click to expand...
Click to collapse
Android development in the Desire C subforum. You will find tons of them in there.
THX
me4488 said:
Android development in the Desire C subforum. You will find tons of them in there.
Click to expand...
Click to collapse
Thank u very much! I will have a look!!!
SensationalRomv4 and Prometheus kernel are a great combination
and good enough for daily use
Hi,
I have a problem with all the custom roms. the sensitive buttons don't work.
I tried all Maclaw's roms and Virginity V3 but i have always this issue.
when i come back to the stock rom, it works.
I think the problem come from the kernel : i tried the Virginity Kernel V3 on my rom stock just rooted, it don't work neither.
can anybody help me ?
rzit said:
Hi,
I have a problem with all the custom roms. the sensitive buttons don't work.
I tried all Maclaw's roms and Virginity V3 but i have always this issue.
when i come back to the stock rom, it works.
I think the problem come from the kernel : i tried the Virginity Kernel V3 on my rom stock just rooted, it don't work neither.
can anybody help me ?
Click to expand...
Click to collapse
go to official stock rom and if problem exists its problem with hardware
eswarvf said:
go to official stock rom and if problem exists its problem with hardware
Click to expand...
Click to collapse
Thank you but everything is fine on stock rom.
i've this problem when i try custom roms only.
rzit said:
Thank you but everything is fine on stock rom.
i've this problem when i try custom roms only.
Click to expand...
Click to collapse
Reroot ur phone and flash
Remember do your own experiments on your phone because its yours
So find a solution by yourself because no one has this problem
Blame Samsung I read somewhere that our phone got this problem
So try and try until u get it
i'm sorry to say you can't do anything about it... neither a developer can, as far as i know.. about 5% of s3 minis have this problem.... you just live with it, i do too
rzit said:
Hi,
I have a problem with all the custom roms. the sensitive buttons don't work.
I tried all Maclaw's roms and Virginity V3 but i have always this issue.
when i come back to the stock rom, it works.
I think the problem come from the kernel : i tried the Virginity Kernel V3 on my rom stock just rooted, it don't work neither.
can anybody help me ?
Click to expand...
Click to collapse
Install corssbreeder then install root cleaner do a full clean & try again
xAbsoLx said:
Install corssbreeder then install root cleaner do a full clean & try again
Click to expand...
Click to collapse
I tried, but it doesn't work for me.
alexvv said:
i'm sorry to say you can't do anything about it... neither a developer can, as far as i know.. about 5% of s3 minis have this problem.... you just live with it, i do too
Click to expand...
Click to collapse
i knew it ! I've never been lucky.
thank you all anyway !
Dear all XDA Developers
i have samsung galaxy note n7000, after we got the official JB update the device went to be so slow, so i choosed to downgrade it to ICS and i download the sogtware image from (www.samsung-updates.com) as i told it should be official software images.
and i downloaded the ODIN v3.09 for pc, connect the phone and install, it fiinished successfully, AFTER that i start to got the error, the phone shutdown suddenley and got the screen said "RST_STAT 0x2000000 User Fault, not kernel panic, upload mode"
i tried to install again and still have the same error the it is random no specific time, then i download and install the Philz and wipe the phone as for install a new ROM and install the same image then got the same error after two days.
my request is how to solve this problem and where to download an official ICS for my GT-N7000
i hope to find the solution here in XDA developers
best regards
No one can help??!!!!
Is this issue so difficult and there is no solution or any idea about solving it??
It depends on how you choose. Going your path back to official ics could be problematic. So i would just go forward install a custom jb rom such as Aryamod then the problem is solved and u will have a beautiful and fast rom. Done.
Sent from my GT-N7000 using Tapatalk 2
Also, stock ics is known to brick phones.
as i got the official JB via update the device is too slow, so would that problem solved when installing a custom rom? and which rom should i choose? and the problem now is with the device hardware? or just the ics??
as i searched before it on the internet i found that this is a GPS problem!! how can i check that please??
Saqar said:
as i got the official JB via update the device is too slow, so would that problem solved when installing a custom rom? and which rom should i choose? and the problem now is with the device hardware? or just the ics??
as i searched before it on the internet i found that this is a GPS problem!! how can i check that please??
Click to expand...
Click to collapse
Did you read my post at all? It has got most of the answers. Trying to flash a custom jb using Philz kernel you already have is quite easy
Sent from my GT-N7000 using Tapatalk 2
Saqar said:
as i got the official JB via update the device is too slow, so would that problem solved when installing a custom rom? and which rom should i choose? and the problem now is with the device hardware? or just the ics??
as i searched before it on the internet i found that this is a GPS problem!! how can i check that please??
Click to expand...
Click to collapse
1stly, After getting JB update from OTA, it's recommended to do a factory wipe in stock recovery (This is what Samsung CS told me). I tried and it works (at the expense of having all my data n apps gone).
2nd, Like @forest1971 says, there's many good custom Roms And you can choose per your liking. I strongly oppose going back to ICS as of the brick bug threat. If you really want to downgrade, might as well go for GB.
3rd, WHAT is the point of our good Dev's spending their precious time and cracking their heads to come up with a custom rom IF they are not BETTER than Stock roms?
forest1971 said:
Did you read my post at all? It has got most of the answers. Trying to flash a custom jb using Philz kernel you already have is quite easy
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
sorry about bothering you all, now i am trying to install the Aryamod rom and i will post here after i finish installing and testing it
thanks alot
best regards
Saqar said:
sorry about bothering you all, now i am trying to install the Aryamod rom and i will post here after i finish installing and testing it
thanks alot
best regards
Click to expand...
Click to collapse
Please read full installation guide procedures to avoid error. Good Luck
forest1971 said:
Did you read my post at all? It has got most of the answers. Trying to flash a custom jb using Philz kernel you already have is quite easy
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Jackwu696 said:
1stly, After getting JB update from OTA, it's recommended to do a factory wipe in stock recovery (This is what Samsung CS told me). I tried and it works (at the expense of having all my data n apps gone).
2nd, Like @forest1971 says, there's many good custom Roms And you can choose per your liking. I strongly oppose going back to ICS as of the brick bug threat. If you really want to downgrade, might as well go for GB.
3rd, WHAT is the point of our good Dev's spending their precious time and cracking their heads to come up with a custom rom IF they are not BETTER than Stock roms?
Click to expand...
Click to collapse
thanks alot i will try now to install a custom rom
i just installed the Aryamod rom according to the installation guides and i test it, the stock ICS is more faster, is there anyway that i can install the stock ICS and avoiding problems?
just reinstalled it via Odin 3 PC
and i will back after test
if there is any idea please inform me
best regards
Saqar said:
i just installed the Aryamod rom according to the installation guides and i test it, the stock ICS is more faster, is there anyway that i can install the stock ICS and avoiding problems?
just reinstalled it via Odin 3 PC
and i will back after test
if there is any idea please inform me
best regards
Click to expand...
Click to collapse
Installing through odin is the best method for flashing stock rom. You have done it right. Just remember NEVER to do a factory reset anywhere with ICS. Not even in recovery
Sent from my GT-N7000 using XDA Free mobile app
Friends, am trying to test multiboot... i am right now USING Ressurrection Remix 6.0 with linux kernel. I´ve downloaded the app multiboot, but it says that i dont have a kexec hardboot kernel...
If you guys have experience in multiboot, please, tell me....
1 - How to use a kexec hardboot kernel? (i know flash kernel on ADB) .. but... what kernel should i use?
2 - Should i first flash the kernel, or install the rom? (because everytime i am using some rom, and flash other kernel, i got stuck on sony logo)
3 - I wanted to use a lollipop as primary and 6.0 as secundary.
Does we have some smart brain to help me figure it out? ( i ´ve been searching but... nothing about the kernel.. )
and i bet it´s going to be really usefull help to everyone....
check this
team_div said:
check this
Click to expand...
Click to collapse
i did it... but it doesnt work. I could never use lollipop and marshmallow roms. Multiroms seems to be a mistery for Z1 devices... even the app doenst support us anymore. And i still not understanding about kexec kernels :crying:
LinkRaf said:
i did it... but it doesnt work. I could never use lollipop and marshmallow roms. Multiroms seems to be a mistery for Z1 devices... even the app doenst support us anymore. And i still not understanding about kexec kernels :crying:
Click to expand...
Click to collapse
You can install a rom that has a kernel compatible with multiboot on 5.1.1 and then install the last multirom by drakonizer if I remember well and then install a MM Rom on secondary partition
benplay64 said:
You can install a rom that has a kernel compatible with multiboot on 5.1.1 and then install the last multirom by drakonizer if I remember well and then install a MM Rom on secondary partition
Click to expand...
Click to collapse
Yes, but i´ve searched it but couldnt find a rom with this kernel.... do you know a rom benplay?? i´ve downloaded a lot lol
LinkRaf said:
Yes, but i´ve searched it but couldnt find a rom with this kernel.... do you know a rom benplay?? i´ve downloaded a lot lol
Click to expand...
Click to collapse
Cm12.1 and jaguar are working for sure
So I was reading a guide and the best kernels for CM and I found Franco kernel so I decided to flash it and now my phone won't get past the bootlogo aka picture. Now I an very frustrated as the guide clearly said it was compatible with CM and now in here. I did not make a backup so if there is a way to fix this on CM I would glady give a thanks to real answers. Thank you, and I also tried to flash an S7 ROM to fix it but now my phone is not booting past the picture is it tjte ROM or kernel???? Please help
Taylor_Swift_Fan said:
So I was reading a guide and the best kernels for CM and I found Franco kernel so I decided to flash it and now my phone won't get past the bootlogo aka picture. Now I an very frustrated as the guide clearly said it was compatible with CM and now in here. I did not make a backup so if there is a way to fix this on CM I would glady give a thanks to real answers. Thank you, and I also tried to flash an S7 ROM to fix it but now my phone is not booting past the picture is it tjte ROM or kernel???? Please help
Click to expand...
Click to collapse
Well played Sir....
jasons1004 said:
Well played Sir....
Click to expand...
Click to collapse
Sir I need real help please do not troll.please
Taylor_Swift_Fan said:
So I was reading a guide and the best kernels for CM and I found Franco kernel so I decided to flash it and now my phone won't get past the bootlogo aka picture. Now I an very frustrated as the guide clearly said it was compatible with CM and now in here. I did not make a backup so if there is a way to fix this on CM I would glady give a thanks to real answers. Thank you, and I also tried to flash an S7 ROM to fix it but now my phone is not booting past the picture is it tjte ROM or kernel???? Please help
Click to expand...
Click to collapse
What variant of note 5 do you have and what rom did you run before?
CM is not compatible with this device..
Turbine1991 said:
CM is not compatible with this device..
Click to expand...
Click to collapse
....
...
But I fixed it so no problems now