Database Develop

Bluetooth/Phone Call Issues, Anyone?

Has anyone else been unable to make phone calls after connecting to your vehicle's bluetooth? Most of the time, I can make phone calls without issue. Sometimes, I can't even hear the call ring when I'm connected to bluetooth. Occasionally, when I turn my vehicle off, the call goes silent instead of transferring to the earpiece on the phone. The only way I can fix the issue is rebooting the phone. This has become increasingly frustrating for me, since the issue is so inconsistent.
I'm running the stock ROM, rooted and un-encrypted.
Thanks!

Same here
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed

I am having issues also. Just today, my phone shows I am connected to my Pioneer Navi head unit, and the Pioneer shows connected to my phone. I proceed to make a call. The audio on my radio mutes as it should, and nothing. No ringing, no busy signal nothing. so i hang up and try three more times. on that third retry, i heard the other party faintly, realizing that even though my radio muted and shows BT connected, the call went through the ear speaker on the phone. When I hung up the phone, my radio unmuted.
Last week, I was having issues where i couldnt hear any rings or busy signals. It would be silent for 20 seconds or so, then i hear the other party say "hello".
I honestly thought it was my head unit, since it is about 4 years old. But now I see others with similar issues on other brand bluetooth systems in their cars.

robbnice said:
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
Click to expand...
Click to collapse
I just got my N6 today and I'm having trouble with My Ford Touch as well. I can get it to pair and play music, but it won't "connect" to my phone. It's odd because my N5 works fine with it. I would assume the N6 wouldn't be different.
We probably have to wait for an update from Ford, which will probably take months...
EDIT: Well I decided to try it again. I deleted the Nexus 6 entry as well as the Nexus 5 entry. Went through the pairing process again and it worked as intended. Not sure what happened the first time.

I ran into the same problem as others where my N5 worked flawlessly with my Ford Sync in my fusion, but the N6 is terrible.
I love the phone, but this is really annoying. I get into the car and sometimes it connects immediately, other times I have to turn off and back on the bluetooth about 3 times for it to finally connect. Very weird. Ford offers an upgrade to my Sync system, but wants $50 to do the upgrade. Pass.
I might try what the other person did and delete all entries for phones and pair it again. Unfortunately, the weather is pretty bad outside, so it might need to wait a short bit.
Has anyone else had luck re-pairing with their car and had reliable connections?

I use Ford Sync.
robbnice said:
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
Click to expand...
Click to collapse
I use Ford Sync, and everything works as expected. I am Stock and unrooted. I guess it would come down to what version of Sync. Mine is from 2012. No touch screen. I also delete all other entries on the system and start from scratch making sure that the N6 is the main device.

If I can wake up the screen on my own, outgoing calls work fine
PaisanNYC said:
I am having issues also. Just today, my phone shows I am connected to my Pioneer Navi head unit, and the Pioneer shows connected to my phone. I proceed to make a call. The audio on my radio mutes as it should, and nothing. No ringing, no busy signal nothing. so i hang up and try three more times. on that third retry, i heard the other party faintly, realizing that even though my radio muted and shows BT connected, the call went through the ear speaker on the phone. When I hung up the phone, my radio unmuted.
Last week, I was having issues where i couldnt hear any rings or busy signals. It would be silent for 20 seconds or so, then i hear the other party say "hello".
I honestly thought it was my head unit, since it is about 4 years old. But now I see others with similar issues on other brand bluetooth systems in their cars.
Click to expand...
Click to collapse
I have a Nexus 6 running Benzo ROM (5.1.1) and I have a GPS Nuvi 3580 bluetooth-enabled which I want to use to make calls while driving. I have added this device to my trusted devices so my phone unlocks as soon as it connected to it.
If my phone screen is on, then I'm able to call anyone from the bluetooth device, no issues. But as soon as my screen goes off, I can't make calls and when I switch on the screen on my own, I see a message "Process system isn't responding. Wait or close?"
Irrespective of what I select on this message, the call goes through. But it totally defeats the purpose of handsfree bluetooth mode. Is there something that is not allowing the bluetooth device to wake my phone up.
Also when I receive an incoming call, I see the notification on my GPS but I can't receive the call in one go. It takes multiple calls for it go through. I have also noticed that my bluetooth device keeps disconnecting and connecting without any change on either the phone or the GPS side.

androidfan91 said:
I have a Nexus 6 running Benzo ROM (5.1.1) and I have a GPS Nuvi 3580 bluetooth-enabled which I want to use to make calls while driving. I have added this device to my trusted devices so my phone unlocks as soon as it connected to it.
If my phone screen is on, then I'm able to call anyone from the bluetooth device, no issues. But as soon as my screen goes off, I can't make calls and when I switch on the screen on my own, I see a message "Process system isn't responding. Wait or close?"
Irrespective of what I select on this message, the call goes through. But it totally defeats the purpose of handsfree bluetooth mode. Is there something that is not allowing the bluetooth device to wake my phone up.
Also when I receive an incoming call, I see the notification on my GPS but I can't receive the call in one go. It takes multiple calls for it go through. I have also noticed that my bluetooth device keeps disconnecting and connecting without any change on either the phone or the GPS side.
Click to expand...
Click to collapse
Since I last made that post you quoted, i purchased and installed a 2015 model of the Pioneer AVIC-8100NEX. It has Android Auto, but can be used with the regular Pioneer UI also. I have had no issues anymore with this new radio. Maybe the BT protocol in the radio is newer? Im not that tech savvy to know. But the 2015 radio had no issues with BT calls anymore, on Pioneer's UI or Android Auto's UI.

P10 and Android Auto

Hello,
Today I installed the SONY XAV-AX100. Super. Everything works quite smoothly. I just have a problem with calling through android car. If someone calls me or call me and I connected via android car, so the call does not appear on the radio display only phone which is useless.
When I tested the Nexus 4 with Android CyanogenMod v6, it works well.
Some idea?

matata86 said:
Hello,
Today I installed the SONY XAV-AX100. Super. Everything works quite smoothly. I just have a problem with calling through android car. If someone calls me or call me and I connected via android car, so the call does not appear on the radio display only phone which is useless.
When I tested the Nexus 4 with Android CyanogenMod v6, it works well.
Some idea?
Click to expand...
Click to collapse
Firstly double check your bluetooth settings for that device and make sure all the sliders related to phone calls and Bluetooth audio are enabled, if that doesn't work - try a variation of making your head unit connect to the device and vice versa.
I have a 2014 passat and the Bluetooth works perfectly when connected, first connection on car start is a bit pissy because my smartwatch initially demands all Bluetooth, manually connecting to the VW Phone in Bluetooth just reconnects both devices and it works fine for calling, music and voice control.
If these tips don't work, It might sadly be a lack of support within the head unit itself (some are very picky)

@stevob21
You don't have AA and don't understand the problem, so why did you respond? It's not BT related issue.
@matata86
I have the same problem. AA has all needed permissions, but calls still not show on the unit. Interesting is that with my previous phone, P9 - it was working as long phone has Android 6.0. After update to 7.0 - it has stopped working. So it has to be related with Huawei's 7.0 phone manager. Someone with root access should try to freeze phone manager and check it...

mr.mrcn said:
@stevob21
You don't have AA and don't understand the problem, so why did you respond? It's not BT related issue.
@matata86
I have the same problem. AA has all needed permissions, but calls still not show on the unit. Interesting is that with my previous phone, P9 - it was working as long phone has Android 6.0. After update to 7.0 - it has stopped working. So it has to be related with Huawei's 7.0 phone manager. Someone with root access should try to freeze phone manager and check it...
Click to expand...
Click to collapse
Yeah apologies, I must have got this mixed with another thread I was looking at when writing this related to BT issues when connecting where phone calls/address books aren't operable though they work fine after manually initiating the connection.

Same problem here. I can make calls with "ok google, call John Smith" but the notification doesn't show in order for me to end the call. I can end the call from the phone but usually rely on the other party to end the call from their phone.
Text messaging has similar behavior. I can send text messages from AA using voice commands but cannot receive them on screen nor are they read back to me. Again, they do show up on the phone.
All notifications are allowed for the phone and messaging apps. I've also set the battery manager to NOT turn off those apps to save power during screen off. I've tried other phone apps, though I didn't think this should matter but why not try
The deck is a JVC KW-V930BW and the phone is a P10 plus. All other Android Auto features seem to function correctly. I read in a forum for some other phone brand that exhibits the same behavior that it is due to some security feature in that phone and cannot be changed. I wonder if that is the case with the P10 plus?
Anyone else run into this or have a fix? Thanks all!
PS: not interested in rooting.

follow-up
From a thread in another forum, this appears to be an android auto/huawei compatibility issue that they're working on. A recent update seems to have fixed an sms issue so now text messages are read back to me. Regarding the phone notifications, I've mounted the phone using a magnetic vent mount close the steering wheel so I can end calls easily from the phone itself. I'm going to call that "good enough"

It seems to working now with B171, at least in my A6 from 2015 with the latest MMI-Update.

LwannaCM said:
It seems to working now with B171, at least in my A6 from 2015 with the latest MMI-Update.
Click to expand...
Click to collapse
All of a sudden mine is working too, though still on B170. The only thing that changed that I can recall is I updated Google Messages and was prompted whether I wanted to make it my default messaging app to which I agreed.

Android Auto Audio Issues, Problems, Audio routing issue?

I'm having issues with the audio when using Android Auto. I'm connected through a OEM usb cable to the car
it also appears to connect via bluetooth.
When I connect my phone to the car Ford Explorer 2017, or other 2017 models everything appears to work fine, I can use google now and ask questions, I can request to play a song. But when I ask to call someone it calls but then I can't hear an audio from the call, and the other person can't really hear me.
Sometimes it seems like it works but most of the time it doesn't. If it I reboot the phone and the car audio it works fine for a call if I don't do anything else. But If I play a song, and then trying making a call that's when I seem to have issues. Any ideas as to why this is?
I've searched the forums seems like people have similar issues but no one seemed to have any answers. I've checked the bluetooth profile and enabled all profiles, I've enabled all Android Auto App permissions.
I have a Google Pixel with Pure Nexus installed with Android 7.1.2 with the latest Android Auto app installed.
Any help would be greatly appreciated!

Problem with calls

Recently changed the rom of my phone to android 9.0 (tugapower), my phone is the oneplus one. On android auto i have everything working fine, aa mirror included, but today i couldn't make a call. The phone worked fine, the call was made but i couldn't hear nothing and the receiver couldn't hear to. Is there a problem with the Bluetooth of my car? In previous versions of android it worked always without any failures. Is there any configuration that i need to do on android auto or android itself that i am missing? must i connect to the Bluetooth of the car before conecting the usb cable? Is there a way to connect wirelessly?
Thank you for your help.

Can't talk handsfree in car.

So I got the phone and I'm trying to use the handfree Bluetooth in the car. I have connected the phone, and Spotify works flawlessly, but when I try to make a phone call it disconnects the car audio then goes to spraker/regular mode. I have tried to clear my Bluetooth app cache with no success. Do I have to sideload a new codec for the Bluetooth for it to stay connected to the car when making phone calls.
I'm running Pie 9, February 15th 2019 Update
Build number - P-mr1-rc003-rzr-190305.3110
I have searched but can't seem to find anything with the same issues as me, if come one could kindly point me at the right direction that would be great.

Having something similar.
My Wifes RP2 connects to an ATOTO A6 Pro headset, but when her phone rings it doesn't appear on the head unit, and we can't accept calls. you can initiate a call from the head unit, but it doesn't know the call is happening, so you can't drop the call. Been hoping Android 10 is coming soon, so I can upgrade her and test again.
My Huawei Mate 10 Pro works perfectly with the head unit, so I think this is RP2 related.
Did you find anything that helped you?

I'm having the exact same problem with my Razer Phone 2.
What car do you have? It's a 2015 Kia Soul for me.