Oky, i done that, Kies finised downloading a firmaware for my phone, It's ask me to enter a previous code "???" . I'm not able to do that because i don't know what the code is. I tried to flash the goldenxx.pit and everything else from the I8190 серв. укр.zip
My phone in Download mode is:
ODIN MODE
product name : GT - I8190
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUL: OFFICIAL
HW REV: 0x5 ( this is on down-left on the screen )
When i tried to flash the recovery from I8190 серв. укр.zip i can't get over write system.img. I am able to provide you guys with any information from ODIN or phone. Tree Button combo ( vol+ / home / power ) is not working. Just the Download Mode
Related
sorry for bad english.
i tried to upgrade my mini via odin 4, i think i did somethink wrong now my phone problem is, odin is not see (adding) my mini except odin 3 vxxx, i tried to install europe rom (phone,pda,csc) but not worked, i tried to install recovery on odin 3 but not wroked again what can i do ??
by the way when i try to enter download mode on my phone at the screen writes ;
odin mode
product name gt-s5570i
custom bin down : no (0 counts)
current bin : samsung official
and when i try to enter recovery mode at the screen writes; appling multi csc and when i try to wipe data reset;
e:format volume: rfs format failed on /dev/stl11
please some one help me...
bager13 said:
sorry for bad english.
i tried to upgrade my mini via odin 4, i think i did somethink wrong now my phone problem is, odin is not see (adding) my mini except odin 3 vxxx, i tried to install europe rom (phone,pda,csc) but not worked, i tried to install recovery on odin 3 but not wroked again what can i do ??
by the way when i try to enter download mode on my phone at the screen writes ;
odin mode
product name gt-s5570i
custom bin down : no (0 counts)
current bin : samsung official
and when i try to enter recovery mode at the screen writes; appling multi csc and when i try to wipe data reset;
e:format volume: rfs format failed on /dev/stl11
please some one help me...
Click to expand...
Click to collapse
anyone ?
which rom did you flash? also if you can enter download mode then reflash stock rom and one thing make sure the rom you downloaded was for s5570i not s5570.i think you might have installed a rom for s5570 on your s5570i.
darkshadow1997 said:
which rom did you flash? also if you can enter download mode then reflash stock rom and one thing make sure the rom you downloaded was for s5570i not s5570.i think you might have installed a rom for s5570 on your s5570i.
Click to expand...
Click to collapse
i tried a lot of rom until friday, now when i try to install stock rom vith odin 3 vxxx , odin stops at writing start screen. i wan t to know this, why odin 4 can t see my phone, maybe it works with one package.
i installed via 307 but when odin finished and i started the phone at the screen writes can t mount data, rebooting and phone is stuck at opening screen.
bager13 said:
i tried a lot of rom until friday, now when i try to install stock rom vith odin 3 vxxx , odin stops at writing start screen. i wan t to know this, why odin 4 can t see my phone, maybe it works with one package.
i installed via 307 but when odin finished and i started the phone at the screen writes can t mount data, rebooting and phone is stuck at opening screen.
Click to expand...
Click to collapse
Hmmmh... try reflashing stock ROM, then go to recovery mode. Then wipe data.
All files are downloaded from samsung-updates.
N910HXXU1BOC7:
NPL Nepal CSC:
Mod Edit links removed
You will not lose your warranty or do any harm to your device if you flash Stock Firmware. Please note that it's only for N910H. Knox stays 0x0.
Install Instructions:
Extract (unzip) the firmware file
Download zip-file ( Odin 3.10.6 )
Extract zip-file
Run Odin
boot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect your device to Pc/Laptop and wait until you get a blue sign in Odin
Add the firmware file to AP
Click the start button.
SAMSUNG USB Driver for Mobile Phones v1.5.49.0
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note: Flashing any Custom recovery or SuperSu Change your Knox to 0x1
Root Instructions:
Download TWRP v2.8.6.1 img.tar file.
Download SuperSu v2.46 and put it in youre device Storage
Run Odin
boot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect your device to Pc/Laptop and wait until you get a blue sign in Odin
Add the twrp file to AP
Click the start button
Reboot to recovery ( press and hold Home + Power + Volume Up buttons )
Flash SuperSu through Recovery.
Quick download mate .. thankssssssssss
Can anyone tell me if any of these CSC have option in camera settings to silent camera sound. (Without rooting some CSC enable that option in camera settings)
Nop
ariefabuzaky said:
Nop
Click to expand...
Click to collapse
Any idea if any of 910H CSC has it
tipu2185 said:
Any idea if any of 910H CSC has it
Click to expand...
Click to collapse
I have no idea if u not rooted but u cant install app from playstore
can someone uploaded to mega or g drive please
Fail to flash twrp
Hai guys
recently i wanted to root my note 4 using the tutorial on first post but it fail. ive been trying to flash my note 4 several times with different pcs to but it always fail
can someone help
thanks before
Hello, would it be possible to upload the modem alone ,from NPL CSC .. I have already downloaded CAC and upgraded to 5.0 but some how reception is not so good .. So wanted to try Nepal modem alone. Thanks in advance
Mod Edit
Links removed as none of them are acceptable file hosts on XDA
Please refer to this thread:
http://forum.xda-developers.com/note-4/general/lollipop-variants-roll-t3029201
and use the existing thread for the N910H variant
Thread closed
malybru
Forum Moderator
So I wanted to upgrade my firmware to the latest build, and having vast experience doing so, I downloaded from Sammobile.com the latest firmware build for my G800F and Odin showed "FAILED" with no error reported on the steps screen. Tried again, FAIL, swapped cables, FAIL.
I tried loading other firmwares...and nothing. The Download mode screen reads:
ODIN MODE
PRODUCT NAME: SM-G800F
CURRENT BINARY: SAMSUN OFFICIAL
SYSTEM STATUS: OFFICIAL
Secure Download: Enabled
KNOX WARRANTY VOID: 1
AP SWREV: A1
ASV GROUP: 7
Any ideas or suggestions?
-Paul
Try the Odin version contained in CF-Auto-Root
https://download.chainfire.eu/523/CF-Root/CF-Auto-Root/CF-Auto-Root-kminilte-kminiltexx-smg800f.zip
Have no problem with G800F and this latest 4.4.2 (15 May 2015) G800FXXU1AOE3_G800FDBT1AOC1_G800FXXU1AOE3_HOME.tar
Use Odin with admin rights,
don't know if necessary, but clear your internal storage and wipe everything before flash with TWRP:
https://www.androidfilehost.com/?fid=23991606952600970
Paul_Days said:
So I wanted to upgrade my firmware to the latest build, and having vast experience doing so, I downloaded from Sammobile.com the latest firmware build for my G800F and Odin showed "FAILED" with no error reported on the steps screen. Tried again, FAIL, swapped cables, FAIL.
I tried loading other firmwares...and nothing. The Download mode screen reads:
ODIN MODE
PRODUCT NAME: SM-G800F
CURRENT BINARY: SAMSUN OFFICIAL
SYSTEM STATUS: OFFICIAL
Secure Download: Enabled
KNOX WARRANTY VOID: 1
AP SWREV: A1
ASV GROUP: 7
Any ideas or suggestions?
-Paul
Click to expand...
Click to collapse
Had the same on G800H while flashed latest Stock ROM published on sammobile.. finally the following steps a working (in my case)
flashing the stock firmware through Odin (ignore failed message)
take off the battery and put it back in
boot into Download mode.
flashing the twrp recovery
Reboot normal
The rom is now updated and had no problems with it (flashed it on this way 2 weeks ago)
+1 Worked like a Charm thanks "mind"
But now I have a new issue....I'm getting "Warning. Camera Failed".... this is like...a nightmare....damn.
- Paul
mindestens said:
Had the same on G800H while flashed latest Stock ROM published on sammobile.. finally the following steps a working (in my case)
flashing the stock firmware through Odin (ignore failed message)
take off the battery and put it back in
boot into Download mode.
flashing the twrp recovery
Reboot normal
The rom is now updated and had no problems with it (flashed it on this way 2 weeks ago)
Click to expand...
Click to collapse
Hello this method worked for me. Thank you. May I ask what version of TWRP this file https://www.androidfilehost.com/?fid=23991606952600970 is?
I am confused as after putting this via ODIN I still have stock android recovery when pressing VOL+ & HOME & POWER
best regards
pablocool said:
Hello this method worked for me. Thank you. May I ask what version of TWRP this file https://www.androidfilehost.com/?fid=23991606952600970 is?
I am confused as after putting this via ODIN I still have stock android recovery when pressing VOL+ & HOME & POWER
best regards
Click to expand...
Click to collapse
i have no idea @pad11 posted this link
Hi,
I have a Samsung Galaxy S5 Mini G800F (stock rom, no custom recovery, no root). From one day to another it stopped working and hangs in a boot
loop now. After displaying the samsung logo it shows green rows for a few seconds and restarts. It is possible to go into download
mode with home + volume down + power on, but not in recovery mode with home + volume up + power.
What I have tried:
reflashed stock ROM from sammobile.com with odin 3.10.6 without errors, problem still exists
reflashed stock ROM with odin flags "re-partition", "Nand Erase All" and corresponding PIT file without errors, problem still exists
flashed TWRP 2.8.7.0 but couldn't enter recovery mode
rooted the device with odin, same behaviour
adb could not find device
What I can exclude:
display is ok (no flickering or pixel rows in download mode)
battery is ok (works with other smartphones)
power button works properly (phone does not start while inserting battery)
I think the problem lies in the bootloader. Is it possible to re-flash the bootloader and if yes, how is it done?
Is there anything I can do or is the phone hard-bricked now?
Thanks for your help! :good:
Hello i have the same problem of you my sm-g800f bootloop
No access to recovery only dowload mode
Odin stuck on the step initialized can not flash stock rom
I didn t find a pit files for this phone i will try to flash it
Can you give me a link for the pit files thank you :good:
kmikem said:
Hello i have the same problem of you my sm-g800f bootloop
No access to recovery only dowload mode
Odin stuck on the step initialized can not flash stock rom
I didn t find a pit files for this phone i will try to flash it
Can you give me a link for the pit files thank you :good:
Click to expand...
Click to collapse
I only have the open european Pit-file for DBT without hidden partition (ht#tp://w#w#w.android-hilfe.de/attachments/kminilte_eur_open-zip.404750/) or with hidden partition (ht#tp://w#w#w.android-hilfe.de/attachments/kminilte_eur_open_hidden200m-rar.405887/). The second link worked for me.
The files I got from ht#tp://w#w#w.android-hilfe.de/thema/pit-file-vom-s5-mini-dbt-gesucht.696814/
Sorry, as newbie user I'm not allowed to post links Simply remove the hashes from above links.
Hello all developers
the problem start when my friend ask me to fix his mobile
the first look to the mobile is
when i click power on it's show Samsung logo with this word at the left top( recovery booting ... )then reboot after 2 seconds at-least
i have download the latest official Rom 5.1.1 from sammobile
N910TUVU2DOK2_N910TTMB2DOK2_N910TUVU2DOK2_HOME
after flash with odin i remember that is must complete the installation after first reboot with android logo but there is nothing happened !! its always reboot with the same word ( recovery rebooting )
I have tired to flash many Roms
Many BL
Many Modem
try to flash PIT File and the same
try Emergency with Kies and nothing changed
Kies give me this information when i put the model
PDA : OK2 / CSC : OK2 / PHONE : OK2 (TMB)
the all info about this mobile :
Model : SM-N910T
S/N : RF8FC131QYY 14.12
IMEI : 356095064430028
when i enter Odin Mode thats appear
ODIN MODE (HIGH SPEED)
PRODUCT NAME : SM-910t
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUS : CUSTOM
REACTIVATION LOCK : OFF
KNOX WARRANTY VOID : 0x1 (4)
QUALCOMM SECUREBOOT : ENABLE (CBS)
RP SWREV : S1, T1 , R1 , A2 , P1
SECURE DOWNLOAD : ENABLE
UDC START
please help me to fix it with any rom ... I can't go recovery mode but i can go download mode with ODIN
Any help please
i have the same issue but im on verizon. Also kies doesnt recognize my phone and I can't get to recovery. Any help would be appreciated. otherwise i just have an expensive paperweight.
Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Had the same issue i tried all kinds of roms stock and custom nothing seemed to work bought a new battery didnt make a diff now my phone is dead
noob4598 said:
Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Click to expand...
Click to collapse
Can you share PIT file for 910t? My phone is just keep bootcycle no matter what I do with ODIN, and try to flash ROM after ODIN, it bombs out, and boot cycle...
Thanks.
I am stuck with the same thing
any help would be great I am some what of a noob to this
Anyone had luck solving this problem?
noob4598 said:
Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Click to expand...
Click to collapse
Link plz
waleedy said:
Link plz
Click to expand...
Click to collapse
I'm having the same problem. I'm not getting any errors, and I found and flashed the PIT file with the stock firmware. Still no boot. It just sits on the boot up screen. No recovery, no battery icon...no nothing.