Database Develop

My Optimus 2x is in a boot loop, help!

Hi,
I have a problem with my Optimus 2x, it is rebooting without end, like in a loop !
1-the phone turns ON, the LG logo appears
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2-then the scrolling image appears
3-then after 2 seconds, the phone automatically shut itself OFF
4- and then the phone automatically turns ON again. We are looping back to 1- without end.
What can I do to fix this problem?
I have important Memo notes and sms I don't want to loose !!
For information, I have this phone since April. On May, I have rooted the phone using Super One Click. Since then the phone was working perfectly. I never flashed a ROM on the device. The problem happened just after a normal usage of the phone.
I really need your help..
Chris

Not sure why this would happen on stock rom with normal usage I've only encountered this problem after flashing other roms, I used nvflash but if you go down that route you will lose everything. Tried battery out and sim for a few minutes?
Sent from my Optimus 2X using xda premium

If u have backed up using clock work mod .. then u can boot into recovery and restore

This is what worked for me.
http://forum.xda-developers.com/showthread.php?p=17505909
Sent from my LG-P990 using Tapatalk

Having the same problem after installing cm7.
HELP please.

Factory reset in recovery.

It hapend to me,i downloaded and flashed stock rom with smartflash and now works better than before. Flashed open euro with 0725 bb and it works like charm
Sent from my LG-P990 using XDA App

Rusty! said:
Factory reset in recovery.
Click to expand...
Click to collapse
Factory reset will wipe user data.
I recommend kdz tool.

I was talking to the guy who just installed CM7

First, thanks for your considering my problem.
thatguychris said:
Not sure why this would happen on stock rom with normal usage I've only encountered this problem after flashing other roms, I used nvflash but if you go down that route you will lose everything. Tried battery out and sim for a few minutes?
Click to expand...
Click to collapse
It was a stock ROM with normal usage. To be precise the problem arise, just after I selected the autorun option of the application Total Recall.
I have tried battery, sim, sd-card out, no success, the phone did not boot normally (not even once). As I can see nvflash is not an option as it is erasing everything.
thamerkh said:
If u have backed up using clock work mod .. then u can boot into recovery and restore
Click to expand...
Click to collapse
I have not installed ClockworkMode on my device (so I still have the stock recovery).
atkhobby said:
This is what worked for me.
http://forum.xda-developers.com/showthread.php?p=17505909
Click to expand...
Click to collapse
I took the battery out for a while, tried holding button combination while booting. No success, the phone did not boot normally (not even once).
luka2858 said:
It hapend to me,i downloaded and flashed stock rom with smartflash and now works better than before. Flashed open euro with 0725 bb and it works like charm
Click to expand...
Click to collapse
Does your method keep memo notes and sms ? if yes how to solve this problem my problem.
kitty's_daddy said:
Factory reset will wipe user data.
I recommend kdz tool.
Click to expand...
Click to collapse
What is kdz tool? how could I use it to solve this problem?
Chris

Smartflash worked for me.
Thanks.

Rusty! said:
I was talking to the guy who just installed CM7
Click to expand...
Click to collapse
Sorry.
I assume he has not cwm and backup who first posted.

chris247 said:
First, thanks for your considering my problem.
What is kdz tool? how could I use it to solve this problem?
Chris
Click to expand...
Click to collapse
Sorry, I didn't see your reply.
Kdz is only LG's firmware format.
All LG's phones can be flashed with kdz file by kdz tool (aka kdz updater).
Refer to this.
And Kdz tool at here.
and you have to need some kdz file for your p990.
(I have not but someone has it.)
In my case(su660) the type is "CDMA" and phonemode is "CS_EMERGENCY".
Request someone's advices more for p990.

007xico said:
Having the same problem after installing cm7.
HELP please.
Click to expand...
Click to collapse
Boot into recovery (holding Volume down and Power button) and factory reset, had the same problem yesterday when flashing CM7. Running fine now

I have looked at Smartflash, it is for flashing the Baseband (not the ROM itself), that means the software that has the GSM driver WiFi driver.
I don't see how Smartflash could help retrieving my phone with the important memos and sms.
Given that my phone is not booting, what can I do to retrieve the important memos and sms?

No, Smartflash will install stock ROMs in a .bin format as well.
Can you boot to recovery? (hold power and vol-)

Rusty! said:
No, Smartflash will install stock ROMs in a .bin format as well.
Can you boot to recovery? (hold power and vol-)
Click to expand...
Click to collapse
As I have the stock recovery (the standard one that you get when buying the device), what will happen when I boot to recovery ? (does it do full erase of data?)
Four months ago I have rooted the phone using Super One Click. But I did not changed anything else: the recovery and the ROM are still the stock ones.

Yeah to the best of my knowledge, if you try and boot to the stock recovery, you will just get an automatic factory reset.

Rusty! said:
Yeah to the best of my knowledge, if you try and boot to the stock recovery, you will just get an automatic factory reset.
Click to expand...
Click to collapse
Oops, this means that booting to recovery will erase my important memos and sms :'(
Are there any other action I could do to avoid loosing them?

NVFlash ClockworkMod recovery: http://forum.xda-developers.com/showthread.php?t=1229407

[RECOVERY] New touch recovery 5.8.1.3 available

Hello everyone,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just flashed new Touch Recovery from Rom Manager, anyone knows a possible way to flash it with fastboot?
Thanks,
Tiwiz

Here is the touch recovery with the scripts to flash it from windows mac or linux:
http://www.mediafire.com/?mrb142a45ukom3b
you can include it in the first post.

Don't like the BIG fonts in the recovery , you can't see all of the text of the zip files.

tiwiz said:
Hello everyone,
I just flashed new Touch Recovery from Rom Manager, anyone knows a possible way to flash it with fastboot?
Thanks,
Tiwiz
Click to expand...
Click to collapse
Just trying to find... whats new?

Update cwm flashable
Ok I made a update cwm flashable .zip for people that want a quick and easy installation.Simple installation ,
-Put the recovery update zip on your phone (externalSD if you got it) , go into CWM , select it and flash.
-FIRST REBOOT YOUR PHONE (not into recovery) !!!!!!!!!!!!!!!!!!!!!!!!
-After full reboot now you can go to recovery and enjoy !!!!!!!!!
Click to expand...
Click to collapse
CWM-5.8.1.3 touch recovery
CWM-5.8.1.3 touch recovery (mirror2)l
You want to go back to 5.0.2.7-r2
CWM-5.0.2.7-r2 for phone with only internalSD
CWM-5.0.2.7-r2 for phone with only internalSD(mirror2)
CWM-5.0.2.7-r2 for phone with externalSD
CWM-5.0.2.7-r2 for phone with externalSD(mirror2)

Links don't work mate...

SP1996AC said:
Links don't work mate...
Click to expand...
Click to collapse
They work over here but I will upload to second mirror.
EDIT: Done, look 2 post above for more links.

2nd link working for me, thanks! I will flash it tomorrow first need some sleep .
BTW: this is all safe and tested right? Just want to be sure...

civato said:
Ok I made a update cwm flashable .zip for people that want a quick and easy installation.Simple installation ,
​
CWM-5.8.1.3 touch recovery
CWM-5.8.1.3 touch recovery (mirror2)l
You want to go back to 5.0.2.7-r2
CWM-5.0.2.7-r2 for phone with only internalSD
CWM-5.0.2.7-r2 for phone with only internalSD(mirror2)
CWM-5.0.2.7-r2 for phone with externalSD
CWM-5.0.2.7-r2 for phone with externalSD(mirror2)
Click to expand...
Click to collapse
Do we need to wipe both cashe?? And does it work from 5.0.0.3??
Sent from my LG-P990 using xda premium

Thanks a bunch! I was waiting for a flashable zip

civato said:
They work over here but I will upload to second mirror.
EDIT: Done, look 2 post above for more links.
Click to expand...
Click to collapse
I quite liked it untill I failed to find a way to "power off"... Back to 5.0.2.8 for now.
Edit: But thanks The touch interface itself was a treat. The design made the direct "place finger on chosen option" approach, a little too clunky; but absolutely functional.
The real treat, was being able to use my touch buttons, rather than the mechanical power/volume buttons at the side and top of my phone.
Just a shame that there is'nt an option to shut down the phone for those of us with rebooting issues.

TheDaftandFilthyOne said:
I quite liked it untill I failed to find a way to "power off"... Back to 5.0.2.8 for now.
Click to expand...
Click to collapse
Umm.. wouldn't you likely reboot the phone after flashing something?

silentmelodies said:
Umm.. wouldn't you likely reboot the phone after flashing something?
Click to expand...
Click to collapse
Yes, but rebooting seems to drastically increase the chances of my phone, not detecting my external SD card.
So CWM for me is something like:
1: Turn off phone ----> Pow + Vol = CWM
2: Power off when done with CWM
3: Turn phone back on.
Reboot and I'm going to have to have to shut down the phone regardless, because my external SD is'nt being detected.
I suspect it's because CWM mounts storage in one way, CM in another and LG stock in a third way; some sort of mounting information is carried over when rebooting and my storage management bugs out.

TheDaftandFilthyOne said:
Yes, but rebooting seems to drastically increase the chances of my phone, not detecting my external SD card.
So CWM for me is something like:
1: Turn off phone ----> Pow + Vol = CWM
2: Power off when done with CWM
3: Turn phone back on.
Reboot and I'm going to have to have to shut down the phone regardless, because my external SD is'nt being detected.
I suspect it's because CWM mounts storage in one way, CM in another and LG stock in a third way; some sort of mounting information is carried over when rebooting and my storage management bugs out.
Click to expand...
Click to collapse
i also have this problem but when you are booted in the rom just reinsert your sdcard and it will be mounted no big deal for me

Isn't it more simple to have a power off option?
Opening your phone each time you perform a soft reboot...

owain94 said:
i also have this problem but when you are booted in the rom just reinsert your sdcard and it will be mounted no big deal for me
Click to expand...
Click to collapse
I also have this "problem" but when booted phone after CWM no need to reinsert sdcard, just rebooted once more and everything`s fine. Today I`ll try new touch CWM.

zeepday said:
I also have this "problem" but when booted phone after CWM no need to reinsert sdcard, just rebooted once more and everything`s fine. Today I`ll try new touch CWM.
Click to expand...
Click to collapse
I'd still prefer for power off to be implemented into CWM Touch.
Shutting it down and turning it back on is faster than rebooting and it's not an option with RAMhack kernels either.

SuperSkill said:
Do we need to wipe both cashe?? And does it work from 5.0.0.3??
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
No need for wipe, it should work on any cwm.

Alright, I flashed it and everything works fine! Thanks again mate!

TheDaftandFilthyOne said:
Yes, but rebooting seems to drastically increase the chances of my phone, not detecting my external SD card.
So CWM for me is something like:
1: Turn off phone ----> Pow + Vol = CWM
2: Power off when done with CWM
3: Turn phone back on.
Reboot and I'm going to have to have to shut down the phone regardless, because my external SD is'nt being detected.
I suspect it's because CWM mounts storage in one way, CM in another and LG stock in a third way; some sort of mounting information is carried over when rebooting and my storage management bugs out.
Click to expand...
Click to collapse
I had the same problem and followed your method in earlier CWM. But with new CWM Touch, external SD card mounts ok when directly rebooted into system. No problem after 5/6 rebooting. Try and see.
Sent from my Optimus 2X using Tapatalk

[Q] [I9001] SGS+ bricked/broken

Hey guys,
I own a SGS+ and tried to flash a ROM a few month ago.
Not sure which one it was in particular but it was a 4.1.2 ROM.
Normally it worked pretty well but that time it broke my phone apparently.
So now a few month later I tried to get it to work again.
My phone stucks at the splashscreen, easy said.
It boots till the splash screen and then it's on for about 3-4 minutes I guess and then the screen turns off.
But apparently it still runs because if I try to start it again over the power button it doesn't work.
I have to remove the battery, insert it again and then I can use the power button.
I tried several things and I'm out of information here.
So maybe one of you guys can help me out here?
Thanks for reading!

Try wiping cache an dalvik cache and fix permissions. If that doesn't help do a full wipe and install a new rom. If it still doesn't work, flash a stock rom via odin. Also, which recovery are you using?
Sent from my GT-I9001 using xda app-developers app

Already did everything you mentioned, multiple times.
Well I used at first CWM 6.0.1.2 then switched to 6.0.2.8, then 6.0.3.2, then 6.0.3.6 and then TWRP 2.4.0.0 and TWRP 2.6.0.0.
I tried those who should be for the bricked phones.

Try to flash a new kernel, then flash a new ROM. You should be able to get into download mode...
Click to expand...
Click to collapse
..

That's not the problem.
I can get into download mode, I could get into download mode all the time.
I don't think you got my problem right:
My phone stucks at the splash screen.
Doesn't turn off only screen turns off but the phone is still running.
I can only reboot if I take the battery out.
So it boots up to the splashscreen and stucks.
I flashed a few new roms and nothing worked.

If you can get into download mode, try flahing a stock rom via odin.
Sent from my GT-I9001 using xda app-developers app

NintendoLink07 said:
That's not the problem.
I can get into download mode, I could get into download mode all the time.
I don't think you got my problem right:
My phone stucks at the splash screen.
Doesn't turn off only screen turns off but the phone is still running.
I can only reboot if I take the battery out.
So it boots up to the splashscreen and stucks.
I flashed a few new roms and nothing worked.
Click to expand...
Click to collapse
1.Remove your battery.
2.Reinsert battery.
3.Put in download mode.
4.Flash stock rom.
5.Profit!
Sent from my Nexus 4 using xda app-developers app

I tried that one too, no success.
The phone still stucks in the splashscreen, nothing changed.

NintendoLink07 said:
I tried that one too, no success.
The phone still stucks in the splashscreen, nothing changed.
Click to expand...
Click to collapse
Download BroodRom(Not ics or jb just the old GB edition) it's a lifesaver.
1.Go to recovery.
2.Format EVERYTHING(data, cache, dalvik AND system.)
3.Download mode
4.Flash broodrom with Odin.
That should work!
Sent from my Nexus 4 using xda app-developers app

Not really, still the same.
My phone still stucks in splashscreen.

Does nobody else know a solution?
I can flash normal, go to download mode easily and everything else too.
It just stucks in the splashscreen.

Follow my tutorial about how to flash back to stock. See here: http://forum.xda-developers.com/showpost.php?p=44047896&postcount=2

NintendoLink07 said:
Does nobody else know a solution?
I can flash normal, go to download mode easily and everything else too.
It just stucks in the splashscreen.
Click to expand...
Click to collapse
Maybe you didn't flash appropriate ROM for your device. Read this thread, especially the first post by our forum mate xsensman and try to check if it could be concerning also your device:
http://forum.xda-developers.com/showthread.php?t=1890667

Even through I know how to flash, I tried the two links from the guys above and tried them.
Again nothing happened either.
Flashing was okay, everything was fine.
Unfortunately the phone still stucks in splashscreen.
No one else knows what I could do?

verify serial No
NintendoLink07 said:
...Flashing was okay, everything was fine.Unfortunately the phone still stucks in splashscreen.
Click to expand...
Click to collapse
Mate, something is strange there. With splashscreen you mean bootloop, right? So you see the logo, but the phone doesn't really loads the Android?
OK, here we go: please remove the battery and write down your serial No and google a bit is it really i9001? There are about 20 different types of SGS so just to make sure which model do you have.
That bootloop can happen for several reasons, but I would assume that in your case it happens either for:
bootloader isn't working properly
you haven't flashed the proper ROM for your device.
I suspect very strongly the bootloader, so re-flashing the bootloader via Odin, theoretically, should revive your phone. Just check (as written above) do you REALLY have i9001, (as otherwise -if not- you could brick it with the bootloader for i9001):
First post, "5. Follow the instruction" (all files there)
http://forum.xda-developers.com/showthread.php?p=32144697

I'm 100% sure that I have a real i9001, not a special edition or something like that.
And I flashed before it got broken a few month and the roms worked just fine.
Well but then it broke somehow.
I just see that my phone with the CWM-Recovery can't format /data and hangs.
Can't do anything unless I remove the battery and boot up again.
Could this be a hint for you guys?

NintendoLink07 said:
....
Click to expand...
Click to collapse
Did you flash the bootloader as I've wrote you in my previous post?

NintendoLink07 said:
I'm 100% sure that I have a real i9001, not a special edition or something like that.
And I flashed before it got broken a few month and the roms worked just fine.
Well but then it broke somehow.
I just see that my phone with the CWM-Recovery can't format /data and hangs.
Can't do anything unless I remove the battery and boot up again.
Could this be a hint for you guys?
Click to expand...
Click to collapse
I have no idea what may that be, but are you sure your phone is bricked?
Have you tried to use normal TWRP 2.6 instead of that one for bricked phones?
I don't know, but maybe this helps:
Guide: How to Recover from a bootloop http://forum.xda-developers.com/showthread.php?t=1660596

@tetakpatak: Yes, I did it like the post "suggested".
@3L4CK_5C0RP10N: No, I'm actually not sure, that's why I wrote "bricked/broken".
I'm not the best guy at those things as you can guess.
No, I didn't tried the normal one, gonna try it now, atleast it's worth trying.
I read the post you linked me here and tried those things, unfortunately nothing happened.
Even tried it with ADB, also no solution found there.
But thanks already for the work guys!

suggest you try the following:-
1) power it down, remove battery, remove SIM card and Ext SD card and press and hold your power button for at least 30 seconds to a min, before reinserting battery and entering CWM recovery
2) In CWM recovery, enter Mounts and Storage and Format every partition, that can be formatted, repeat it twice ( You will lose all your data ) meaning you will be trying to get a clean environment for a fresh start. Do not reboot but pull out battery, press power for a few seconds and insert battery.
If you need your data, in mounts and storage, enter usb storage, here with usb connected to PC you can copy your entiere internal SDcard to PC, for salvage later.
3) get into Download mode, to flash the oldest i9000 Stock ROM 2.3.3 with AriesVe.ops using Odin 4.43 ( with ops ticked) How to flash follow this
download ROM from here
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​

No Recovery, No installed ROM, No ADB, No Fastboot, Nothing

Alright. I know I'm stupid. So basically I flashed BlissPop on my Moto G 2nd Gen nearly a month ago. Everything worked fine so far, I flashed TWRP and BlissPop onto my beloved Moto G. I started getting a few issues with BlissPop so I decided to switch to CM12.1, so I downloaded CM12.1 [Titan] and tried to flash it using TWRP.
So this is where all starts. I got an error flasing the zip-file (I can't remember which error it EXACTLY WAS), but I already have wiped data, dalvik and even system without knowing, so I tried this again. This time, I accidently checked nearly everything to wipe off. So my phone turned off obviously and I couldn't get it to turn on again. It's basically hard-bricked. I found a tutorial here on XDA showing how to recover the Moto G into Stock-Android 4.4.4.
The problem is, it uses ADB. My phone isn't able to boot into recovery, not even into stock-recovery, there is literally NOTHING on my phone. My PC detects an unknown USB-device, when plugging in via USB-cable.
To sum it all up: My phone has no recovery mode, TWRP, ROM/OS, just nothing. It won't even boot up, but my PC detects it as an unknown USB-device.
I'm basically too stupid and way too poor to buy a new, good phone. So I'm asking you guys if there is any possibility to just get my phone into recovery again (no key-pressing combination works). :crying:
If you need any extra information, feel free to ask me, also I'm thanking you guys in advance, even though I'm pessimistic regarding this problem. :silly: :laugh: :crying:

barwarista said:
Alright. I know I'm stupid. So basically I flashed BlissPop on my Moto G 2nd Gen nearly a month ago. Everything worked fine so far, I flashed TWRP and BlissPop onto my beloved Moto G. I started getting a few issues with BlissPop so I decided to switch to CM12.1, so I downloaded CM12.1 [Titan] and tried to flash it using TWRP.
So this is where all starts. I got an error flasing the zip-file (I can't remember which error it EXACTLY WAS), but I already have wiped data, dalvik and even system without knowing, so I tried this again. This time, I accidently checked nearly everything to wipe off. So my phone turned off obviously and I couldn't get it to turn on again. It's basically hard-bricked. I found a tutorial here on XDA showing how to recover the Moto G into Stock-Android 4.4.4.
The problem is, it uses ADB. My phone isn't able to boot into recovery, not even into stock-recovery, there is literally NOTHING on my phone. My PC detects an unknown USB-device, when plugging in via USB-cable.
To sum it all up: My phone has no recovery mode, TWRP, ROM/OS, just nothing. It won't even boot up, but my PC detects it as an unknown USB-device.
I'm basically too stupid and way too poor to buy a new, good phone. So I'm asking you guys if there is any possibility to just get my phone into recovery again (no key-pressing combination works). :crying:
If you need any extra information, feel free to ask me, also I'm thanking you guys in advance, even though I'm pessimistic regarding this problem. :silly: :laugh: :crying:
Click to expand...
Click to collapse
Have you tried booting into bootloader mode? Hold the power button and the down volume button for about five seconds and release. If nothing happens, then I don't know.

I did the same thing...you're going to have to flash everything via fastboot. Or you can try ADB sideload, sideload work perfectly for me. I wiped everything off my phone accidentally.

Add me on skype illumanati22 I can help you

The best you can do is this:
http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-t3018682
follow the steps
But first of all , install the Motorola driver! (if you already installed , delete it , and re-install it).
And follow the steps from the guide!
This Guide is my always rescue kit!
After you're done , then if you want to install a rom , you must root it .....

antonis997 said:
The best you can do is this:
http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-t3018682
follow the steps
But first of all , install the Motorola driver! (if you already installed , delete it , and re-install it).
And follow the steps from the guide!
This Guide is my always rescue kit!
After you're done , then if you want to install a rom , you must root it .....
Click to expand...
Click to collapse
d8n0g said:
I did the same thing...you're going to have to flash everything via fastboot. Or you can try ADB sideload, sideload work perfectly for me. I wiped everything off my phone accidentally.
Click to expand...
Click to collapse
Ragarianok said:
Have you tried booting into bootloader mode? Hold the power button and the down volume button for about five seconds and release. If nothing happens, then I don't know.
Click to expand...
Click to collapse
Thank you so much guys. Unfortunately, I can't even boot my phone into bootloader. Literally, nothing works. But I'll give it a shot again, I'll let you know if something happens ASAP

barwarista said:
Thank you so much guys. Unfortunately, I can't even boot my phone into bootloader. Literally, nothing works. But I'll give it a shot again, I'll let you know if something happens ASAP
Click to expand...
Click to collapse
You're pretty ducked. I'd recommend returning it and act like you're dumb to the customer service people. If you can't boot into anything, then you can't even repartition stuff.
Sent from my Moto G 2014 using Tapatalk

Alright so, I basically re-installed drivers, plugged my phone into my PC. Still, nothing happens, BUT - when I go into Hardware-Manager, it shows 'QHSUB__BULK'
I still can't boot my phone into ANYTHING though.
But thank you so much so far guys, I really apprecciate your help

barwarista said:
Alright so, I basically re-installed drivers, plugged my phone into my PC. Still, nothing happens, BUT - when I go into Hardware-Manager, it shows 'QHSUB__BULK'
I still can't boot my phone into ANYTHING though.
But thank you so much so far guys, I really apprecciate your help
Click to expand...
Click to collapse
That doesn't mean anything. @LuK1337 told me so. I guess you'll have to return it
Sent from my Moto G 2014 using Tapatalk

barwarista said:
Alright so, I basically re-installed drivers, plugged my phone into my PC. Still, nothing happens, BUT - when I go into Hardware-Manager, it shows 'QHSUB__BULK'
I still can't boot my phone into ANYTHING though.
But thank you so much so far guys, I really apprecciate your help
Click to expand...
Click to collapse
You can try this method provided by @Lucas Eugene. Click here

keval_104 said:
You can try this method provided by @Lucas Eugene. Click here
Click to expand...
Click to collapse
That's not working, If you're recommending something to someone you should check it first.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
/thread
Sent from my Moto G 2014 using Tapatalk

d8n0g said:
I did the same thing...you're going to have to flash everything via fastboot. Or you can try ADB sideload, sideload work perfectly for me. I wiped everything off my phone accidentally.
Click to expand...
Click to collapse
i need help i wiped out everything using twrp, but i can go to recovery mode but it says no os installed.
my phone is samsung s5 g900f. i hope ypu can help me

Samsung Note 8 N950F Boot Loop after latest update

Hey
After the latest update, every time I called with the Note 8, it would restart and every time I would switch it off, it would start back on. So the first thing I did was boot to recovery mode and wipe cache partition. When I restarted the phone, I would get a "No command" error and it would always boot to the recovery mode. Next, I tried flashing the latest firmware (I made sure to use the right carrier, VDH) from SamMobile using Odin which still didn't work. Then I tried NAND erase and re-partition and this didn't work either.
I am very new to this so any solutions would be greatly appreciated
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

NoteEight said:
Hey
After the latest update, every time I called with the Note 8, it would restart and every time I would switch it off, it would start back on. So the first thing I did was boot to recovery mode and wipe cache partition. When I restarted the phone, I would get a "No command" error and it would always boot to the recovery mode. Next, I tried flashing the latest firmware (I made sure to use the right carrier, VDH) from SamMobile using Odin which still didn't work. Then I tried NAND erase and re-partition and this didn't work either.
I am very new to this so any solutions would be greatly appreciated
View attachment 5256493View attachment 5256495
Click to expand...
Click to collapse
NoteEight said:
Hey
After the latest update, every time I called with the Note 8, it would restart and every time I would switch it off, it would start back on. So the first thing I did was boot to recovery mode and wipe cache partition. When I restarted the phone, I would get a "No command" error and it would always boot to the recovery mode. Next, I tried flashing the latest firmware (I made sure to use the right carrier, VDH) from SamMobile using Odin which still didn't work. Then I tried NAND erase and re-partition and this didn't work either.
I am very new to this so any solutions would be greatly appreciated
View attachment 5256493View attachment 5256495
Click to expand...
Click to collapse
When you tried to flash stock with Odin did it pass? Fail? Did it give an error code? Did you download the latest filmware? As you can't flash older filmware than what is already on the phone.

stonedpsycho said:
When you tried to flash stock with Odin did it pass? Fail? Did it give an error code? Did you download the latest filmware? As you can't flash older filmware than what is already on the phone.
Click to expand...
Click to collapse
Hey, thanks for the reply
When I flashed with stock firmware, Odin said it passed. And I used the latest firmware for my carrier from SamMobile

NoteEight said:
Hey, thanks for the reply
When I flashed with stock firmware, Odin said it passed. And I used the latest firmware for my carrier from SamMobile
Click to expand...
Click to collapse
I was hoping that it was an issue with Odin so I could possibly help you, even having a look on the internet doesn't being much help other than trying a factory reset. I've been on xda for years and never seen this issue before. Hopefully someone more knowledgeable will see your post, I suggest bumping your thread every 24 hrs.
Having tried flashing stock with Odin which usually resolves most bugs I would guess that it is a hardware issue and if you're able to, take it to a service centre.
If you do find a solution please post it here on XDA for anyone who searches this in the future

stonedpsycho said:
I was hoping that it was an issue with Odin so I could possibly help you, even having a look on the internet doesn't being much help other than trying a factory reset. I've been on xda for years and never seen this issue before. Hopefully someone more knowledgeable will see your post, I suggest bumping your thread every 24 hrs.
Having tried flashing stock with Odin which usually resolves most bugs I would guess that it is a hardware issue and if you're able to, take it to a service centre.
If you do find a solution please post it here on XDA for anyone who searches this in the future
Click to expand...
Click to collapse
Thanks for trying. If I do find the solution, I'll be sure to post it here

Looks like the partition in your internal SSD has been corrupted and needs to be reformatted. If that doesn't work then you need to have the motherboard on your device replaced.

iceepyon said:
Looks like the partition in your internal SSD has been corrupted and needs to be reformatted. If that doesn't work then you need to have the motherboard on your device replaced.
Click to expand...
Click to collapse
How would I go about doing this?

Bump

The same thing happened to me. I tried everything possible. I tried a new flash via odin. unsuccessful. only Download mode works, nothing else works, not even recovery mode, black screen.

Have anyone found the solution to fix this issue ?

im having similar problems