Database Develop

[Q] RSD Lite does not recognize my milestone

Please help me. I'm trying to flash the froyo stock rom, BUT my RSD Lite didnt recognize my phone. I tried with bootloader screen, recovery screen, with the phone on, debugging on, debugging off. I tried all the ways it normaly worked. I'm using th CM7 latest build, RSD Lite 4.6 and the latest motorola drivers(MotoHelper_2.0.40_Driver_4.9.0.exe). I tried in two windows xp pcs and one vista pc. I have the same error. It get stuck on "Finding new hardware - MTP Device" I think it have something with portal&tools. Please what i have to do?

I tried with windows 7 64 bits now and failed again!! I find these on motorola forum
https://supportforums.motorola.com/thread/38198?start=15&tstart=0
It looks like my problem! There is some way to flash a sbf on linux?

http://www.motorolafans.com/forums/motorola-milestone/30082-flashing-sbf-file-under-linux.html
Or
http://forum.xda-developers.com/showthread.php?t=775913
[email protected]

sileshn said:
http://www.motorolafans.com/forums/motorola-milestone/30082-flashing-sbf-file-under-linux.html
Or
http://forum.xda-developers.com/showthread.php?t=775913
[email protected]
Click to expand...
Click to collapse
Thanks sileshn!
I'm downloading Ubuntu and tomorrow I'll test on Linux!

best help
this was the best rsd lite help i found. really good. btw...loyal xda member...have found that this is the best community. but this guy did ALOT of work on this so kudos to him.
androidforums com/droid-x-all-things-root/209019-rsdlite-windows-7x64-problems-solutions
Later
Chandalen
ps. dont forget the dot between androidforums and com

Chandalen said:
this was the best rsd lite help i found. really good. btw...loyal xda member...have found that this is the best community. but this guy did ALOT of work on this so kudos to him.
androidforums com/droid-x-all-things-root/209019-rsdlite-windows-7x64-problems-solutions
Later
Chandalen
ps. dont forget the dot between androidforums and com
Click to expand...
Click to collapse
Thanks, but I have already read this tutorial. And my problem is not only windows 7 64 bits. Is with windows xp 32 bits too. I tried every way, but nothing works. I hope someone can help me to solve this. Today i cant test with linux, but tomorrow I'll test. At least I can change between the mods, like cm7 and shadowmod cause i dont have to flash nothing to do this, is only apply a uptade.zip

Ok. Now I'm really lost! I tried with a live cd from ubuntu. But i got this error:
Waiting for phone: Segmentation fault (core dumped).
I think the problem is with my phone. Maybe there is a problem with my bootloader, i dont know! When I turn on my phone with the power+X appears only the exclamation inside a triangle and one picture of a phone. After i do vol up+ camera button appears:
Andoird system recovery <2e>
Use d-pad to highlight; center to select.
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
E: Can't open /cache/recovery/command
This last line is a problem? Or use a live cd was my problem? A nandroid backup can save me? I tried, but maybe all of my backups are with this problem. Can someone, please, upload a Nandroid backup from CM7, preferably with only the stock things. Please help me, with you do no how to help, if you know someone who can help, i beg you to tell him my problem. I thank everyone who helped so far.
And please pardon me for my horrible english!

CronusStrife said:
Ok. Now I'm really lost! I tried with a live cd from ubuntu. But i got this error:
Waiting for phone: Segmentation fault (core dumped).
I think the problem is with my phone. Maybe there is a problem with my bootloader, i dont know! When I turn on my phone with the power+X appears only the exclamation inside a triangle and one picture of a phone. After i do vol up+ camera button appears:
Andoird system recovery <2e>
Use d-pad to highlight; center to select.
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
E: Can't open /cache/recovery/command
This last line is a problem? Or use a live cd was my problem? A nandroid backup can save me? I tried, but maybe all of my backups are with this problem. Can someone, please, upload a Nandroid backup from CM7, preferably with only the stock things. Please help me, with you do no how to help, if you know someone who can help, i beg you to tell him my problem. I thank everyone who helped so far.
And please pardon me for my horrible english!
Click to expand...
Click to collapse
What happens if you select apply sdcard:update.zip?
When I select that, my phone boots into AOR and everything is fine.

skadude66 said:
What happens if you select apply sdcard:update.zip?
When I select that, my phone boots into AOR and everything is fine.
Click to expand...
Click to collapse
WOW! Fast like a thunder your answer! Is I select this my phone boot into AOR too, BUT i think i can't flash a sbf into AOR. Can I?

CronusStrife said:
WOW! Fast like a thunder your answer! Is I select this my phone boot into AOR too, BUT i think i can't flash a sbf into AOR. Can I?
Click to expand...
Click to collapse
I love these forums, I spend WAY too much time on them xD
If you are able to boot into AOR then you already have a VR installed.
Oh wait. You want to go BACK to Froyo? What bootloader version do you have?

skadude66 said:
I love these forums, I spend WAY too much time on them xD
If you are able to boot into AOR then you already have a VR installed.
Oh wait. You want to go BACK to Froyo? What bootloader version do you have?
Click to expand...
Click to collapse
That's the question! I don't know how to check that!

Boot into Bootloader mode and the first line should tell you what version your bootloader is.

Maybe there is a problem with my bootloader, i dont know! When I turn on my phone with the power+X appears only the exclamation inside a triangle and one picture of a phone. AND THERE IS NOTHING!!!
Please confirm me, Bootloader screen is when you press power + X button right? And recovery screen is when you press vol up + camera right?

CronusStrife said:
Maybe there is a problem with my bootloader, i dont know! When I turn on my phone with the power+X appears only the exclamation inside a triangle and one picture of a phone. AND THERE IS NOTHING!!!
Please confirm me, Bootloader screen is when you press power + X button right? And recovery screen is when you press vol up + camera right?
Click to expand...
Click to collapse
There's your problem! To get into bootloader you need to hold the power button and d-pad up!
When you hold power+x, you are going into recovery mode, the vol-up+camera button is only to display the menu.
Use this: http://forum.xda-developers.com/showpost.php?p=11902513&postcount=7
And you can get the sbf from here: http://and-developers.com/sbf:milestone221
I believe the service version wipes all data.

CronusStrife said:
Maybe there is a problem with my bootloader, i dont know! When I turn on my phone with the power+X appears only the exclamation inside a triangle and one picture of a phone. AND THERE IS NOTHING!!!
Please confirm me, Bootloader screen is when you press power + X button right? And recovery screen is when you press vol up + camera right?
Click to expand...
Click to collapse
I am joining the discussion too. Power off phone. Press dial pad up + power key and release. You should see your bootloader screen. It looks like this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Ok! You both can curse me now! I'm really stupid! My bootloader is 90.78. But i ask to myself how did i get flash a lot of roms without doing it! Flashing now!

CronusStrife said:
Ok! You both can curse me now! I'm really stupid! My bootloader is 90.78. But i ask to myself how did i get flash a lot of roms without doing it! Flashing now!
Click to expand...
Click to collapse
Perhaps you've flashed so many ROMs you forgot you had to get into bootloader in the first place..
Let us know how it goes!

skadude66 said:
Perhaps you've flashed so many ROMs you forgot you had to get into bootloader in the first place..
Let us know how it goes!
Click to expand...
Click to collapse
I flashed with the phone on! When i connect my phone and open rsd lite my phone appears there and i flash! I still dont know what happened with my phone to Rsd lite didnt recognize that at this time! Maybe because I always flashed i Full rom and the last time i flashed only the base rom and applied CM7. BUT it doesnt matter now. Thank you all!

CronusStrife said:
Ok! You both can curse me now! I'm really stupid! My bootloader is 90.78. But i ask to myself how did i get flash a lot of roms without doing it! Flashing now!
Click to expand...
Click to collapse
That's probably because you need bootloader mode only for flashing sbf's. All custom roms only need recovery mode. It must have a while since you flashed a stock sbf. Anyway, just to point out that if you are planning on flashing a custom rom after flashing the stock sbf, you will need to flash the vulnerable recovery before you can get into recovery mode.
Good luck.

sileshn said:
That's probably because you need bootloader mode only for flashing sbf's. All custom roms only need recovery mode. It must have a while since you flashed a stock sbf. Anyway, just to point out that if you are planning on flashing a custom rom after flashing the stock sbf, you will need to flash the vulnerable recovery before you can get into recovery mode.
Good luck.
Click to expand...
Click to collapse
No. I flashed the 2.2 base with my phone on! I remeber that! The rsd lite recognize my phone and i started it! So my phone reboot alone and enter into bootloader alone too. Yes, i'll use your nandroid backup for brazilian froyo! Thanks!

Motorola Milestone always reboot, only on logo

Motorola Milestone always reboot, only on logo
i try to flash with rsd lite SHOLS_U2_02.36.0_UCASHLSMR2EMEAB1B806D.0R_PDS003_USASHLS00RTEU_P046_A008_HWp2a_1FF.sbf
but still same
can any body give solution to back in life this phone?
BL is 90.78

also i try this solution, not working:
jason600 said:
First, flash any froyo (2.2) rom.
Then, take out the battery, then connect to the wall charger (not the PC) without the battery. Put the battery back in if you get the android logo.
I use this method to boot my Milestone when its being problomatic. At the moment, its the only way mine will boot. With mine, I'll get the m logo, then it will panic and reboot. It does this for 5 to 10 minutes, then boots up. Once its booted, everything works fine.
This method 'appears' to bypass some of the checks for normal booting. If I try to boot normally, it will bootloop for hours or until the battery runs out.
You need to flash froyo because when there is a problem, 2.2 kernal panics and tries rebooting. In eclair (2.1) when theres a problem, it just locks at the m logo, so this method wont work.
Also, I dont think flashing with sbf_flash will make a diference, since your not getting any bootloader error messages, the flash is apparently good, something else is causing your problem.
Just to check, you are flashing non-service roms, aren't you? Also try taking out your sim card and sd card, just to make sure they aren't causing problems.
Click to expand...
Click to collapse
+ try to flash GOT_RTEU_2_2_1FULL.sbf also nothing, also tryed to flash vulnerable_recovery_only_RAMDLD90_78.sbf sucesfully but when i enter in recovery mode only icon that phone don't have recovery.
when i flash with rsd say:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i think that this problem is after flashing official 2.2 rom :/

alfamobil said:
also i try this solution, not working:
+ try to flash GOT_RTEU_2_2_1FULL.sbf also nothing, also tryed to flash vulnerable_recovery_only_RAMDLD90_78.sbf sucesfully but when i enter in recovery mode only icon that phone don't have recovery.
when i flash with rsd say:
i think that this problem is after flashing official 2.2 rom :/
Click to expand...
Click to collapse
Make that process again with RDS Lite. Keep the same procedure with your correct .sbf files. When RDS appears like into your screenshot, just pull out the phone from USB cable, pull out the battery, turn on the phone in bootloader mode and reconnect the USB cable after the phone it is in bootloader mode. Do not close RDS Lite when you will disconnect the phone from PC. Let him like he is, with the process in pending. After you will reconnect the phone in bootloade mode, RDS should continue the flashing..hope you will succed

alfamobil said:
Motorola Milestone always reboot, only on logo
i try to flash with rsd lite SHOLS_U2_02.36.0_UCASHLSMR2EMEAB1B806D.0R_PDS003_USASHLS00RTEU_P046_A008_HWp2a_1FF.sbf
but still same
can any body give solution to back in life this phone?
BL is 90.78
Click to expand...
Click to collapse
Did you wipe the phone?
the phone need Factory reset after flash the Froyo.
you'd better format the SD card and put the Openrecovery file on your SD card.
anyway, if you can enter the bootloader, your phone is ok.

letears said:
Did you wipe the phone?
the phone need Factory reset after flash the Froyo.
you'd better format the SD card and put the Openrecovery file on your SD card.
anyway, if you can enter the bootloader, your phone is ok.
Click to expand...
Click to collapse
1. can't install recovery and enter in rec.mode to wipe partition
2. now i will try soluotion from bogddy87

bogddy87 said:
Make that process again with RDS Lite. Keep the same procedure with your correct .sbf files. When RDS appears like into your screenshot, just pull out the phone from USB cable, pull out the battery, turn on the phone in bootloader mode and reconnect the USB cable after the phone it is in bootloader mode. Do not close RDS Lite when you will disconnect the phone from PC. Let him like he is, with the process in pending. After you will reconnect the phone in bootloade mode, RDS should continue the flashing..hope you will succed
Click to expand...
Click to collapse
After that - rsd show Sucess. But still phone only reboot.
and can anybody share open recovery for this phone, b`coz from official thread link's are expired.

alfamobil said:
After that - rsd show Sucess. But still phone only reboot.
and can anybody share open recovery for this phone, b`coz from official thread link's are expired.
Click to expand...
Click to collapse
I think you are not using the correct sbf files. RDS has made his job. The phone it should can be turned on....i think .
Give me your IMEI to tell you what sbf files you should use

bogddy87 said:
I think you are not using the correct sbf files. RDS has made his job. The phone it should can be turned on....i think .
Give me your IMEI to tell you what sbf files you should use
Click to expand...
Click to collapse
And tell me where do you live and what GSM provider do you use

Phone is not sealed in my country, btw i live in Macedonia, Europe and GSM providers are T-Mobile, One and Vodafone VIP on 900mhz.

alfamobil said:
Phone is not sealed in my country, btw i live in Macedonia, Europe and GSM providers are T-Mobile, One and Vodafone VIP on 900mhz.
Click to expand...
Click to collapse
At the first view i think that is what you need to flash
http://www.multiupload.com/7UK3NUJTQ1
But i will be sure if you tell me exactly what you phone model is. I see into the RDS log 4G OMAP. It is Droid X?

thats what happend to me this morning. my colleague gave me his unrooted 2.1-u1 milestone and wanted me to install latest cm, so I flashed GOT through rsdlite, rebooted and everything went find. installed OR, copied all reqiered update zip files und apllied them in OR - then wiped the phone fully and got stuck on M logo ...
reflashed GOT and it worked again so I just applied the CM update zip and rebooted after fullwipe just to see if the phone will start and it did. maybe a few more reboots (after every step) aren't that bad
-edit
I found out that M-logo reboots have startet, after i applied overclocking in OR.

no it's a milestone

alfamobil said:
no it's a milestone
Click to expand...
Click to collapse
...well...that's not a milestone...like the other milestone's from this section. You phone it is an XT720. It is really normal to not work with that .sbf files with you have just flashed it.
That is the section for your phone
http://forum.xda-developers.com/forumdisplay.php?f=929
But i can't find right .sbf file for your phone type...
Hope you will

sry wrong picture!
Phone is Milestone from Central europe and now i can enter in recovery but after clear chache/ resset settings still on logo try with almost all stock roms :/

alfamobil said:
sry wrong picture!
Phone is Milestone from Central europe and now i can enter in recovery but after clear chache/ resset settings still on logo try with almost all stock roms :/
Click to expand...
Click to collapse
well...that it really is a bad story. If you say you have already tryed with almost all stock ROM's...i have no idea about what you can do....
Tryed GOT 2.2.1 ?

Hi everyone
Please excuse my bad english, it's not my native language, but i'm in desperate need of help.
This seems to be my first post here, but i lurked this and other forums for a long time but still can't find a solution to my problem.
So here it is:
I have MOTO QRTY A853 - South Korean version of Milestone. A few days ago I was reckless enough to flash cyanogenmod 7 update dedicated to Droid. Yes, my bad... What I got is bootloader on startup with some error and no possibility to go into recovery.
I flashed SHOLS_U2_05.27.2_SIGNED....sbf via RSD Lite and thus got normal bootloader and ability to go into recovery. But Android never boot normal since then - Motorola logo is as far as it goes then reboots and it goes on over and over.
I tried different roms but result is always the same - looped reboot on Motorola logo.
I also tried to flash cyanogenmod 6.1.2 and couple of times booting reached animated cyanogenmod logo and one time even android home screen but then reboot again...
I can flash any rom via RSD Lite, via nandroid or via update in Open Recovery. And every rom flashes without any error. I always do all needed wipes before and after flashing. I tried ejecting microSD and SIM-card, overclock and undervolt, my battery is always charged. And all I have is looped reboot.

Tutorial: how to unbrick your phone

Bricked my phone after trying out CM7 and then flashing Stock ROM via KDZ_FW_UPD without wiping all data.
Found a way how to fix my problem. This should work for almost all bricked phones.
Remember, this will wipe ALL DATA from your phone. I'm not responsible if something happens with your P970. Do at your own risk.
You will need:
Drivers for P970;
KDZ_FW_UPD_EN
UpTestEX_mod2_marwin
WindowsEnablerv1.1
Download
Start from here if it's first time (no drivers installed, etc):
1) Install all drivers (from Drivers folder);
2) Disable LGE Virtual Modem (Control Panel > System > Hardware > Device Manager);
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Start from here if drivers already installed:
3) Run msxml.msi (in KDZ_FW_UPD folder);
4) Delete mfc42.dll (from KDZ_FW_UPD folder);
5) Run WindowsEnabler.exe and set it to ON;
6) Run UpTestEX_mod2_marwin.exe;
7) Set your phone to S/W Upgrade mode (take out battery, while pressing Volume Up, plug USB cable).
1) Select KDZ file (download from here);
2) Click "CSE web upgrade test", then "Upgrade Start".
Chose your language and wait till phone reboots. It will take some time and could look like nothing is going on. If you see something similar to this (on your phone) for a moment, everything went OK.

maaaaaaaaaaaaan em trying it right now.....let u know as soon as i see some results
THANKS!!!!!!!!!!!!!!!!!
---------- Post added at 01:38 PM ---------- Previous post was at 01:07 PM ----------
"YES" it really works!!!
Thanks a billion times man! You saved my life
(for everyone else who is trying to follow this TUT...when i was updating it was stuck at 4% and showed a lot of errors in the log below...but i guess that didnt matter and now it works...that screen at the end is really must...and i had to force close the update tool after my phone was working)

I think this is solution for ALL BRICKED P970s that can enter into S/W Upgrade mode!!!
Very important is that this method do HARD RESET after flashing firmware so it could UNBRICK ALL of our phones.
Can anyone with bricked phone (not CM7 brick) can test it?

I a little bit edited tutorial and, yeah, it could help for all bricked phones. We just need someone who could test it out.

I linked it at RC's G+ and RootzWiki, in response to those bricking their OB's in regards with CM7. Hope they could give us feedbacks.
Sent from my Optimus Black using xda premium

cool, finally a method that can do "hard reset" without a running system or a recovery installed !!
LG would have implement the hard reset in his Recovery in the B2CAppSetup ! it would avoid lots of send back to LG customer service !!
Thanks

quyTam said:
LG would have implement the hard reset in his Recovery in the B2CAppSetup
Click to expand...
Click to collapse
No, LG would have implement the recovery key combination... It would be remedy for almost all P970 bricks...
Does anybody knows another phone with Android without hardware key combination for recovery?
Is it even possible that hardware key combination (changing bootloader) will be possible to add-on by official LG firmware update? Maybe they should do this with official 2.3 upgrade, but it is probably only dream...
PS. I forgot to thanx, ziiljuks, you're the man!

yes, recovery combination key would be better ^^
ps: I think x8 doesn't have it either

quote from rootzwiki: "adb.exe reboot recovery saved my life!!!!"
i guess we can boot into recovery with this command. i didn't know that adb environment can run with bootloop or volume up screen... can anybody confirm this?

murrun said:
i didn't know that adb environment can run with bootloop or volume up screen
Click to expand...
Click to collapse
No, it can't. You need to boot to OS and have enabled Debugging to get ADB working.
I was trying it many times when I bricked my phone. Look HERE.

It seems very good work! But i just bought my phone, i have not fllash my rom yet, since i am afraid that flashing will damage my warranty forever. Could shut body tell
Me whether there is ANY means to recover the warranty........
Sent from my LG-P970 using XDA App

yes, by reflasing stock rom !

CSE means CS_EMERGENCY
I think this does the same if you select the CS_EMERGENCY mode on KDZU.

Ilko said:
CSE means CS_EMERGENCY
I think this does the same if you select the CS_EMERGENCY mode on KDZU.
Click to expand...
Click to collapse
Nope. Tried that when I bricked my phone couple of weeks ago.
EDIT:
Tested it 5 mins. ago with CS_EMERGENCY in KDZU, and no. No hard resetting.

hmm I should test this tool again. I previously gave up that because it has never worked, until I know those kdz files must keep their name

i dont get the "CSE web upgrade test" button in the UpTestEX_mod2_marwin window.
any ideas?
tried normal upgrade but dosnt make the factory reset and keep geting boot loop.
yes another victim of CM/ > Stock
ok found it. in the type has to be in CDMA not 3GQCT

Hello,man.
There's some problems in using this method.
A guy does the upgrade,and the phone is stuck at 4% too. But unlike the situation u've met, there's not even a error in the log. Then , he has to switch off the USB(means disconnect the phone and the PC. sorry, my English is... - -#). I wanna know how much time does the upgrading process takes. Thanks.
Meanwhile ,there's another guy. He did the same thing .And the phone reboots finally. But what confuses me is that he didn't get the picture on the screen. Could you explain , thanks in my heart!
And thanks ziiljuks very much!

maybe a corrupted kdz file, try to re-download another.

elBartoFlores said:
i dont get the "CSE web upgrade test" button in the UpTestEX_mod2_marwin window.
any ideas?
tried normal upgrade but dosnt make the factory reset and keep geting boot loop.
yes another victim of CM/ > Stock
ok found it. in the type has to be in CDMA not 3GQCT
Click to expand...
Click to collapse
Download THIS package. It has all the files in one folder. Unpack it to C:\ You should get C:\P970_unbrick\*files here*
Install msxml.msi, then run Windows Enabler.exe and click on its icon in the taskbar. Icon will change and will show "ON". Then run UpTestEX_mod2_marwin.exe and do the rest of the job.

glenn_gm said:
Hello,man.
There's some problems in using this method.
A guy does the upgrade,and the phone is stuck at 4% too. But unlike the situation u've met, there's not even a error in the log. Then , he has to switch off the USB(means disconnect the phone and the PC. sorry, my English is... - -#). I wanna know how much time does the upgrading process takes. Thanks.
Meanwhile ,there's another guy. He did the same thing .And the phone reboots finally. But what confuses me is that he didn't get the picture on the screen. Could you explain , thanks in my heart!
And thanks ziiljuks very much!
Click to expand...
Click to collapse
When i followed this tut my update process was stuck at 4% and actually it "didn't" flash the stock rom...(although it was already flash before my the KDZU tool) this tool simply after giving alot of errors in the log file did a hard reset (that last screen---which actually does the magic by formatting the data partition). After that screen my phone restarted and BINGO i was at the setup wizard! then i closed the tool bcz it was stuck but my phone was working

[Q] [I9001] SGS+ bricked/broken

Hey guys,
I own a SGS+ and tried to flash a ROM a few month ago.
Not sure which one it was in particular but it was a 4.1.2 ROM.
Normally it worked pretty well but that time it broke my phone apparently.
So now a few month later I tried to get it to work again.
My phone stucks at the splashscreen, easy said.
It boots till the splash screen and then it's on for about 3-4 minutes I guess and then the screen turns off.
But apparently it still runs because if I try to start it again over the power button it doesn't work.
I have to remove the battery, insert it again and then I can use the power button.
I tried several things and I'm out of information here.
So maybe one of you guys can help me out here?
Thanks for reading!

Try wiping cache an dalvik cache and fix permissions. If that doesn't help do a full wipe and install a new rom. If it still doesn't work, flash a stock rom via odin. Also, which recovery are you using?
Sent from my GT-I9001 using xda app-developers app

Already did everything you mentioned, multiple times.
Well I used at first CWM 6.0.1.2 then switched to 6.0.2.8, then 6.0.3.2, then 6.0.3.6 and then TWRP 2.4.0.0 and TWRP 2.6.0.0.
I tried those who should be for the bricked phones.

Try to flash a new kernel, then flash a new ROM. You should be able to get into download mode...
Click to expand...
Click to collapse
..

That's not the problem.
I can get into download mode, I could get into download mode all the time.
I don't think you got my problem right:
My phone stucks at the splash screen.
Doesn't turn off only screen turns off but the phone is still running.
I can only reboot if I take the battery out.
So it boots up to the splashscreen and stucks.
I flashed a few new roms and nothing worked.

If you can get into download mode, try flahing a stock rom via odin.
Sent from my GT-I9001 using xda app-developers app

NintendoLink07 said:
That's not the problem.
I can get into download mode, I could get into download mode all the time.
I don't think you got my problem right:
My phone stucks at the splash screen.
Doesn't turn off only screen turns off but the phone is still running.
I can only reboot if I take the battery out.
So it boots up to the splashscreen and stucks.
I flashed a few new roms and nothing worked.
Click to expand...
Click to collapse
1.Remove your battery.
2.Reinsert battery.
3.Put in download mode.
4.Flash stock rom.
5.Profit!
Sent from my Nexus 4 using xda app-developers app

I tried that one too, no success.
The phone still stucks in the splashscreen, nothing changed.

NintendoLink07 said:
I tried that one too, no success.
The phone still stucks in the splashscreen, nothing changed.
Click to expand...
Click to collapse
Download BroodRom(Not ics or jb just the old GB edition) it's a lifesaver.
1.Go to recovery.
2.Format EVERYTHING(data, cache, dalvik AND system.)
3.Download mode
4.Flash broodrom with Odin.
That should work!
Sent from my Nexus 4 using xda app-developers app

Not really, still the same.
My phone still stucks in splashscreen.

Does nobody else know a solution?
I can flash normal, go to download mode easily and everything else too.
It just stucks in the splashscreen.

Follow my tutorial about how to flash back to stock. See here: http://forum.xda-developers.com/showpost.php?p=44047896&postcount=2

NintendoLink07 said:
Does nobody else know a solution?
I can flash normal, go to download mode easily and everything else too.
It just stucks in the splashscreen.
Click to expand...
Click to collapse
Maybe you didn't flash appropriate ROM for your device. Read this thread, especially the first post by our forum mate xsensman and try to check if it could be concerning also your device:
http://forum.xda-developers.com/showthread.php?t=1890667

Even through I know how to flash, I tried the two links from the guys above and tried them.
Again nothing happened either.
Flashing was okay, everything was fine.
Unfortunately the phone still stucks in splashscreen.
No one else knows what I could do?

verify serial No
NintendoLink07 said:
...Flashing was okay, everything was fine.Unfortunately the phone still stucks in splashscreen.
Click to expand...
Click to collapse
Mate, something is strange there. With splashscreen you mean bootloop, right? So you see the logo, but the phone doesn't really loads the Android?
OK, here we go: please remove the battery and write down your serial No and google a bit is it really i9001? There are about 20 different types of SGS so just to make sure which model do you have.
That bootloop can happen for several reasons, but I would assume that in your case it happens either for:
bootloader isn't working properly
you haven't flashed the proper ROM for your device.
I suspect very strongly the bootloader, so re-flashing the bootloader via Odin, theoretically, should revive your phone. Just check (as written above) do you REALLY have i9001, (as otherwise -if not- you could brick it with the bootloader for i9001):
First post, "5. Follow the instruction" (all files there)
http://forum.xda-developers.com/showthread.php?p=32144697

I'm 100% sure that I have a real i9001, not a special edition or something like that.
And I flashed before it got broken a few month and the roms worked just fine.
Well but then it broke somehow.
I just see that my phone with the CWM-Recovery can't format /data and hangs.
Can't do anything unless I remove the battery and boot up again.
Could this be a hint for you guys?

NintendoLink07 said:
....
Click to expand...
Click to collapse
Did you flash the bootloader as I've wrote you in my previous post?

NintendoLink07 said:
I'm 100% sure that I have a real i9001, not a special edition or something like that.
And I flashed before it got broken a few month and the roms worked just fine.
Well but then it broke somehow.
I just see that my phone with the CWM-Recovery can't format /data and hangs.
Can't do anything unless I remove the battery and boot up again.
Could this be a hint for you guys?
Click to expand...
Click to collapse
I have no idea what may that be, but are you sure your phone is bricked?
Have you tried to use normal TWRP 2.6 instead of that one for bricked phones?
I don't know, but maybe this helps:
Guide: How to Recover from a bootloop http://forum.xda-developers.com/showthread.php?t=1660596

@tetakpatak: Yes, I did it like the post "suggested".
@3L4CK_5C0RP10N: No, I'm actually not sure, that's why I wrote "bricked/broken".
I'm not the best guy at those things as you can guess.
No, I didn't tried the normal one, gonna try it now, atleast it's worth trying.
I read the post you linked me here and tried those things, unfortunately nothing happened.
Even tried it with ADB, also no solution found there.
But thanks already for the work guys!

suggest you try the following:-
1) power it down, remove battery, remove SIM card and Ext SD card and press and hold your power button for at least 30 seconds to a min, before reinserting battery and entering CWM recovery
2) In CWM recovery, enter Mounts and Storage and Format every partition, that can be formatted, repeat it twice ( You will lose all your data ) meaning you will be trying to get a clean environment for a fresh start. Do not reboot but pull out battery, press power for a few seconds and insert battery.
If you need your data, in mounts and storage, enter usb storage, here with usb connected to PC you can copy your entiere internal SDcard to PC, for salvage later.
3) get into Download mode, to flash the oldest i9000 Stock ROM 2.3.3 with AriesVe.ops using Odin 4.43 ( with ops ticked) How to flash follow this
download ROM from here
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​

Problem with the phone being off and charging

So, i have a issue when the phone is completely off. And it's when i plug in the charger the screen turns on with the charging animation and then
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This pops up (Not my screenshot, found it on a reddit thread with the similar problem)
Now the question i have. Is there a permanent fix for it? I know if you hold the power button with volume up at the same time it'll start up after a while. But i'd just like my phone to start when i hold the power button.
Thanks in advance!
Edit: I propably should've posted my ROM and such. I'm using the stock ROM from a german forum named handy-faq. The reason for that is because i accidently wiped my original rom when i flashed a custom one.

sir_archangel said:
So, i have a issue when the phone is completely off. And it's when i plug in the charger the screen turns on with the charging animation and then
This pops up (Not my screenshot, found it on a reddit thread with the similar problem)
Now the question i have. Is there a permanent fix for it? I know if you hold the power button with volume up at the same time it'll start up after a while. But i'd just like my phone to start when i hold the power button.
Thanks in advance!
Edit: I propably should've posted my ROM and such. I'm using the stock ROM from a german forum named handy-faq. The reason for that is because i accidently wiped my original rom when i flashed a custom one.
Click to expand...
Click to collapse
Do you have TWRP installed?

sir_archangel said:
So, i have a issue when the phone is completely off. And it's when i plug in the charger the screen turns on with the charging animation and then This pops up (Not my screenshot, found it on a reddit thread with the similar problem)
Click to expand...
Click to collapse
mine does that before the animation. but i can start phone by just pressing power button.
Again do you have TWRP installed?
don't start phone with USB cable attached

csoulr666 said:
Do you have TWRP installed?
Click to expand...
Click to collapse
Yes, installed it with WinDroid Universal Android Toolkit. And the version for it should be 2.8.5.0 if i remember correctly.

sir_archangel said:
Yes, installed it with WinDroid Universal Android Toolkit. And the version for it should be 2.8.5.0 if i remember correctly.
Click to expand...
Click to collapse
I've had this problem with TWRP 2.8.1.0. Make sure your recovery is 2.8.5.0.

csoulr666 said:
I've had this problem with TWRP 2.8.1.0. Make sure your recovery is 2.8.5.0.
Click to expand...
Click to collapse
My TWRP version is indeed on 2.8.5.0, I've just restarted my phone in recovery to check.

sir_archangel said:
My TWRP version is indeed on 2.8.5.0, I've just restarted my phone in recovery to check.
Click to expand...
Click to collapse
You are one of the few people for whom the problem still persisted. Offline Charging(charging with the phone off) is governed by the recovery, which is why you see the warning message. The problem is with the recovery not being able to properly address Offline charging, which occurred for everyone on previous versions of TWRP. The newer version fixed this problem for me, you could try to redownload and flash TWRP again just in case.

csoulr666 said:
You are one of the few people for whom the problem still persisted. Offline Charging(charging with the phone off) is governed by the recovery, which is why you see the warning message. The problem is with the recovery not being able to properly address Offline charging, which occurred for everyone on previous versions of TWRP. The newer version fixed this problem for me, you could try to redownload and flash TWRP again just in case.
Click to expand...
Click to collapse
U must be new to HTC. U need s-off to remove it
Sent from a Raider using Tapatalk

kdayyy said:
U must be new to HTC. U need s-off to remove it
Sent from a Raider using Tapatalk
Click to expand...
Click to collapse
I'm not. S-OFF will allow you to remove the warning message. It won't correct the problem with Offline charging in our device.

csoulr666 said:
You are one of the few people for whom the problem still persisted. Offline Charging(charging with the phone off) is governed by the recovery, which is why you see the warning message. The problem is with the recovery not being able to properly address Offline charging, which occurred for everyone on previous versions of TWRP. The newer version fixed this problem for me, you could try to redownload and flash TWRP again just in case.
Click to expand...
Click to collapse
I reflashed TWRP 2.8.5.0, then shut it down and it still didn't work. Eitherway if there is some other way to fix it feel free to let me know.

sir_archangel said:
I reflashed TWRP 2.8.5.0, then shut it down and it still didn't work. Eitherway if there is some other way to fix it feel free to let me know.
Click to expand...
Click to collapse
I have the same problem. If you flash back to stock recovery it will work, even with a custom rom.
Also i've been fiddling with the settings for a bit, can you try the following?
Turn on fast boot and try again. This worked for me, as soon as i turned on fast boot it would charge normally while being off.
I've flashed multiple versions of TWRP and experience the same problem with all of them. Even with the stock rom.
Does anyone know how to get permission to execute 'fastboot erase recovery' ?
I want to wipe it completely and try again..
Btw it amazed me that apparently not everyone is experiencing this problem, so there has to be a solution.. somewhere. Csoul666 could you turn off the option for fast booting and try offline charging to check if this actually works? Problems remains the same for custom roms tho

i do have same problem with TWRP recovery unfortunately it is annoying but since i have 3 month now i kinda forget about it but when flash stock recovery no longer have the problem ! i hope in future update of TWRP will fix it