Good evening
I have a small problem. After flashing CM12.1 I can't charge the device over USB when turned off. The charging screen appears and dissapears after some seconds. And it does that as a loop because it always vibrates before the new screen appears. However using the wall adapter the devices charges without problems. I've used the CM12.1 nightly which was flashed with TWRP including gapps.
Does anyone of you know a solution?
I've still found no workaround or solution for this issue..
Related
hello, I have a problem with my phone, started about a week ago.
I'm not sure if it's a hardware or software problem.
the phone was charging (with official HTC wall charger) with the screen off, when suddenly lights up the screen and start the application "CAR". When full load, I disconnected the charger and used it normally. few hours after a notice appeared that could not load the phone. also several times when the screen is off, the display turns on by itself without touching anything.
also sometimes when I wanted to charge the phone, the red LED is not lit and the system marked as that is charging, but if you restarted the phone, it worked.
sometimes appears Charger notice being disconnected from the charger.
I tried cleaning the micro usb input with a brush, but no change.
Another odd thing I noticed, on the main screen if I turn the phone 180 degrees, the screen turns on, even if I turn off the rotating screen.
it's like this on a dock mode or something.
Yesterday I did a full wipe and it was not any of this, but after loading it returned to it.
Someone happened something similar? which may be the problem?
I have HTC one developer edition, using the ARHD ROM 12.2 with the latest firmware.
Sorry for my English, google translator helped me: P
THANKS
hi all im having an extremely strange problem I have looked all over the internet for a solution and haven't found one so the problem is I connected my xperia z1 to a magnetic charger the wrong way immediately went off. left it charging via usb port and it works again but now it has a strange problem when I connect it to my charger the screen randomly turns on and off and if I turn it off it enters a bootloop until I press the red button then everything goes back to normal. but if I turn it on a gain and connect a usb charger the same thing will happen so I don't know what to do any help would come in handy
tried solutions:
flashed a new kernel and cyanogenmod
went back to stock
wipe data erase
For quite some time I already have the problem that the phone almost always shuts down once i plug in the charger.
It reboots to the bootloader, recovery selection and then briefly shows 65% battery and then the actual battery state.
I'm currently on AOSP 6, however this problem was already present with older versions. I also tried using different basebands without success.
This issue has been becoming quite annoying as I always have to manually restart the phone again to actually boot up instead of showing the charging animation when turned off. I hope you guys can help me with this.
Hi, I have a strange problem with me a2.
The phone after the last update did not want to turn on (the startup screen looped).
The system works thanks to the options of original recovery
Currently everything runs (I think) but has a problem with the cable connection.
After connecting the charger for 5 seconds, it shows charging, after which the phone loses connection, as if I disconnected it from the electricity.
When I want to connect it to my computer, nothing happens.
I suspect that this is still a problem with the system because the phone is charging with the recovery turned on.
I wanted to unlock it and upload the modified recovery to protect myself against miraculous updates in the future.
Hi,
This phone is no charging (trying several cables and chargers with same result). Last week I was able to make a full charge with no problem. Also my laptop is unable to recognize it when some weeks ago did it. No matter is in fastboot or in normal mode.
With phone switched off appears charging animation and green led light but really it doesn't charge (no increase in %).
I have tried with a new battery, a new usb port & flex... same results. I don't see any damage in main PCB, nothing burned.
Phone working fine when power on (but no charging). I can enter in TWRP without problem too. I have made a factory reset (Pixel Experience rom)... no changes.
I don't really know what more I can do. Any idea? Maybe is there any other part involving USB than port or flex?
Thanks!