hi all im having an extremely strange problem I have looked all over the internet for a solution and haven't found one so the problem is I connected my xperia z1 to a magnetic charger the wrong way immediately went off. left it charging via usb port and it works again but now it has a strange problem when I connect it to my charger the screen randomly turns on and off and if I turn it off it enters a bootloop until I press the red button then everything goes back to normal. but if I turn it on a gain and connect a usb charger the same thing will happen so I don't know what to do any help would come in handy
tried solutions:
flashed a new kernel and cyanogenmod
went back to stock
wipe data erase
Related
I'm having a very strange issue with my SGS. I have ONE's 8.3 ROM and the device is functional. But, when i shut the phone down i can't turn it on. Every time I shut it down and then try to turn it on by pressing the power button, de loading circle image show up but a few seconds later the screen turns black, and cycle repeats forever.
The only way I am able to turn the phone on is to connect the usb data cable to the phone and an pc usb port where the phone has been connected before (any other port won't do), afterwards the battery starts to charge (even if full) and I can turn the freaking phone on.
Things i've tried:
Changed ROMs (CM7, MIUI, One), changed Kernels, wiped battery stats
Please help me as this is a very strange problem.
PS: is my phone is in that infinite cycle, i can enter in download mode but not in recovery
If you can enter download mode then try flashing a stock ROM via Odin.
i already try it and have the same problem with stock rom
I think your proximity sensor is not working anymore.
A friend of mine got a similar problem.
His phone won't wake up after having a call.
He only was able to turn it on by connecting it with USB or AC.
I also think you have to send it in for repair.
I'm sorry mate, but that's my solution
Well, maybe someone got a better one.
but my sensor its working perfectly i think inst it... :/
My Xperia is rooted, has recovery and the bootloader is unlocked, I use the stock ROM.
It went smoothly (done it several months ago), but yesterday, the battery emptied so I put it on charge. Today I tried to turn it on, but it didn't work; whenever I press the power button, the LED blinks red. I tried fastboot and flashmode, but none of it works. My PC detects it as an unknown device when I try to turn it on. once
If that helps, it turns on once in a while with CWM.
Anyone can help?
____
EDIT: looks like I used a loose cable and the battery didn't charge at all. God, I feel so dumb.
Georges2251 said:
My Xperia is rooted, has recovery and the bootloader is unlocked, I use the stock ROM.
It went smoothly (done it several months ago), but yesterday, the battery emptied so I put it on charge. Today I tried to turn it on, but it didn't work; whenever I press the power button, the LED blinks red. I tried fastboot and flashmode, but none of it works. My PC detects it as an unknown device when I try to turn it on. once
If that helps, it turns on once in a while with CWM.
Anyone can help?
Click to expand...
Click to collapse
hello;
I had the same problem , I searched on the web for solutions and found something like charging phone overnight , key combinations but nothing helped; my phone was completely dead ; but I did something and phone is now alive; I removed screw of the phone , opened panel; removed battery connector and connected phone to wall charger , by this time phone showed sony logo like on startup , then immediately connected battery connector and left phone to charge for several minutes ; it was showing only sony logo when was charging, after 15-20 minutes disconnected phone from charger , screen went off and after this i reconnected charger, it showed battery screen and started charging with battery and thunder logo; thats all, it was the only solution for me.
geniusatplay said:
hello;
I had the same problem , I searched on the web for solutions and found something like charging phone overnight , key combinations but nothing helped; my phone was completely dead ; but I did something and phone is now alive; I removed screw of the phone , opened panel; removed battery connector and connected phone to wall charger , by this time phone showed sony logo like on startup , then immediately connected battery connector and left phone to charge for several minutes ; it was showing only sony logo when was charging, after 15-20 minutes disconnected phone from charger , screen went off and after this i reconnected charger, it showed battery screen and started charging with battery and thunder logo; thats all, it was the only solution for me.
Click to expand...
Click to collapse
I'm so sorry for causing you the trouble of this....
Turned out that the cable I used is loose and it didn't charge or anything
Hello guys, about two days ago after charging my phone normally I used it for the day, when I got home I tried to connect it to the PC to edit some files and it didn't connect, tried plugging it to wall output to charge, nothing. I tested it with 3 different OEM cables, and nothing... after a while of being connected it started connecting, disconnecting, and so on... a couple of minutes after I disconnected it and connected it again and it started charging normally, this happens while turned off or on... but sometimes when I disconnect the cable and plug it back in again it will stop charging again and repeat the same story.... a weird thing is that when i try to enter flashmode or fastboot mode on pc it will work at the first try so, is this a port problem, battery problem or software problem (i don't think it would be a software problem though) since it has been charging normally before this happened)?
water can cause these problems check inside the flap if a white sticker exists
try using another charger not just the cable
Good evening
I have a small problem. After flashing CM12.1 I can't charge the device over USB when turned off. The charging screen appears and dissapears after some seconds. And it does that as a loop because it always vibrates before the new screen appears. However using the wall adapter the devices charges without problems. I've used the CM12.1 nightly which was flashed with TWRP including gapps.
Does anyone of you know a solution?
I've still found no workaround or solution for this issue..
Hi, I have a strange problem with me a2.
The phone after the last update did not want to turn on (the startup screen looped).
The system works thanks to the options of original recovery
Currently everything runs (I think) but has a problem with the cable connection.
After connecting the charger for 5 seconds, it shows charging, after which the phone loses connection, as if I disconnected it from the electricity.
When I want to connect it to my computer, nothing happens.
I suspect that this is still a problem with the system because the phone is charging with the recovery turned on.
I wanted to unlock it and upload the modified recovery to protect myself against miraculous updates in the future.