Hello folks, this is my verry verry first post so sorry if its not conform the rules
a few weeks ago my phone fell on the floor, and the battery acts weird.
It shuts off after i call 3 minutes claiming the battery to be epty, but when i remove the battery and put it back in again, it shows as full.
two days ago i messed up my phone and i thought well i flash it back
(note: i flashed my madonna before and it always went well)
But now, it flashes all the way to 80% or sometimes even 99% and then it shuts off, starting to blink the tricoloured bootscreen on and off.
when i put in the AC charger it stops blinking showing the tricolour screen steady.
ive been searching for ways to flash the phone from SD-Card so i can kepe the AC-Charger connected, but all i can find on the net is a way to backup the old rom to SD-Card and reflash it from that?
But.. i cant access the old rom anymore?
its from the wizard wiki page
I'm seriously thinking i have a rather expensive paper press, please tell me there's ways to fix it using SD-Card?
i cant order a new battery untill 3 weeks from now, which i really cant survive without my companion hehehe
just turn your phone on and flash it with rom again
The problem is your battery doesn't have enough charge and might be going bad. It will charge on the wall charger even though the tricolor screen is showing, but I believe it charges slowly. Try letting it charge overnight.
I had a similar problem and now my phone is fine.
You can order a new battery for under $10 from ebay.
http://cgi.ebay.com/Cingular-HTC-81...ryZ15034QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
same problem
I have the same problem. Loaded the battery for a whole night, but still it stops at 80% or so....
My battery had huge powerdrain, especcially using bluetooth, before flashing.
I orderded a new one, still waiting. I'll let know if it soves the problem.
If there are any onther experiences i'll be happy to read.
well, so far no luck.
sopme say, the printplate broke, (the greenish thingy with all the odd meganics on them?)
other say there's a transistor mallfunctioning, and some others even dare say its nokia's fault (dont ask me why!) for now, i simply believe im stuck with a rather expensive paperweight
even tho i tried charging it for 3 days nonstop, put the battery in the fridge, nothing worked, i guess ill mail T-Mobile seeing as how im due to prolong my contract, amybe they can do me a favor instead of making me wait a few more months
how to reecharge battery
1. get a hold of a USB cable for the computer(one that you dont usually use)
2. (not connected to the computer) you would need to cut off the end that plugs in you phone and then you will see 4 different wires. you will only be using the red and black wire so just strip those two.
3. take the battery off the phone, plug you phone to the wall charger w/out the battery, and connect the USB wire to you computer(make sure the red and black wires are not touching)
4. touch the red and black wires to the positive and negative end of the battery(the battery has labels of which one is the positive and negative part)
5. hold it there for 10 secs then quickly transfer the battery into the phone. after 3 secs of being in the phone, it should start right up.
this steps also depends on how long your battery has been dead. the maximum time you would do this is 3 times. after that and still not working, thats a confirmation of your battery being a done.
I let my phone battery die, and now I can't turn it on.
Usually I get a red light which goes when the battery is in if its charging.
Sometimes I get a red light even when the battery is in and its charging.
If I do a soft reset, sometimes I get a flashing red light on the sides but then nothing.
I managed to get it back briefly by doing all manner of hard resets and soft resets, and taking the battery out and putting it back in over and over again for about half an hour...
Then I left it charging for half an hour or so and carelessly allowed the battery to die again because I needed to take it with me somewhere - so the same thing has happened again.
I left it charging overnight but I'm not having any luck with it this morning... any help would be much appreciated.
yeah similar problem here. my phone warned me the battery was low... i ignored the warning and used it until it died completely. then it wouldn't turn on. it was late so i just plugged it into the wall charger that came with the phone. i dont think it charged cause in the morning it was still flat. if anything i think having it connected to the charger while not charging drained the last a few drops of juice out of it. had a number of confusing red lights coming up in different spots at different times.
i read on here some guy managed to charge it by getting 3 AA batteries and connecting them directly to the battery for a couple of minuets. i did this and managed to turn the phone on! hoooray!
it had 1% and died in less than a couple of minuets even though i had it on the charger. tried the 3 AA battery trick again but to no avail. i think my battery is dead.
i'm pretty certain i will need to get a new one. i hope you are able to get yours working without buying a new battery.
im really annoyed the Sony Erricson batteries work out to be close to $100 AU. i would prefer to get a legit one... but does anyone have any experience with unofficial batteries? are they any good?
Sorry you're in the same boat... Ericsson really should have made this phone so that it can run out of battery.
Interesting - tell me more about the 3 AA battery trick!
sounds like the cells in your battery isnt balancing hence its dying...think you'll need to buy another one / or at least try another one to make sure it is and not the phone...
Hmmm... I fiddled and pressed buttons and took out the charger and put it in, and then kept pressing the on button while I was doing something else...
Suddenly it made the click noise, but it's not back yet.
It seems to have crashed on the 'Sony Ericsson' start up screen with the green logo.
I don't know if it's charging or not, so I'm not sure whether to turn it off to try again (at the risk of losing the battery), or leave it to charge as it is before I turn it off and can't start it again....
At least it's progress
There are a couple vof threads with many solutions. Look for them, they are very useful.
Yeah I've found a few - Thanks... just nothing they mentioned has worked yet
I think the problem I have may be a slightly different now anyway...
Now, if I unplug it I can't turn it on, but if it's plugged into my computer cable I can get it (every time - after about 3 minutes) to go to the Sony Ericsson loading screen but no further (as if there is no hard reset file for it to load). I can do that by plugging it in, then doing a soft reset (which produces flashing lights on the side) then holding on until it clicks (usually trying that a few times). When it clicks the lights on the side flash and it looks like it charges for a second before the lights go off and its just hte loading screen. I left it for 5 minutes and it turned off completely. Nothing happens if it's plugged into the wall cable at all.
Have you any idea how I might be able be get something to load after the loading screen?... Or any thoughts as to whether you think it's likely to be charging when its on that screen?
Thanks
Hmm... It seems you have a software problem as well.
Here is what I would do: get another battery (fully charged) and try one of these hard reset methods:
http://forum.xda-developers.com/showthread.php?t=437607
Something should work...
Sweet - I managed to get the hard reset screen to ask me the question about going back to factory defaults... after that the lights on the side are coming on to show its charging....
I guess there's a chance that when the battery is charged it'll have the juice to get past the loading screen... I hope anyway.
Wow this title gave me a heart attack almost
i thought someone is dead
plz i need help
hello good day plz i neesd to flash my htc p3600 and sony ericcson cybershot i need a software i can use to flash them plz help me any body that has an idea
just ordered a 1800mAh mugen power replacement battery. should be here in about a week my old SE k800i will be getting a bit of a work out in the mean time.
i think this break from unnecessary technology which I'm far too attached to will do me good. I'm far too materialistic.
hope you manage to get your battery going again!
Right off the bat, my Revo is non-responsive, no buttons will light, backlight, vibration, sound, and of course no splash screen since the screen isn't lighting. The only sense that it is partly there is after a time connected to USB/wall charger the battery warms as if it is charging. Yet, there is no indication during charge on the screen, it stays totally black as described above.
I have been poring over forum posts, CWR threads, and the like, but have come up short on a method of reviving this puppy. thecubed had posted something that seemed promising but doesn't work for me here. At all steps, the phone remains non-responsive and connecting it to the PC yields no mass storage connection. The only step I have abbreviated is letting it charge for an hour since the phone had charged about four hours since it shut down.
Two evenings ago, I flashed from Revolt ROM 1.0 to 1.1. It was successful but since I had just gone through battery calibration and running my battery down until the phone shut down the day before when I flashed it to 1.0, I was hoping (naive?) that I wouldn't have to do it this time (yes, naive!). So, I left the phone on all night, on the wall charger.
I was using it the next day and at one point, while using it in a low reception area, browsing the web, it rebooted on me. No biggie, had that happen in the past. After reboot however, the battery level seemed different so I wanted to get it topped off then calibrate. 1-2 hours later I noticed that the calibration app was showing the mV lower and capacity was at 70%. The battery felt unusually hot. I shut it down, removed the battery and cooled both battery and phone in a small fridge to accelerate the process (was near time to leave work).
Next boot was I recall having an extra FC, one beside the CarHome normal FC with Revolt ROM 1.1. This boot the battery showed maybe 20% capacity so I said "screw it" and deleted battery.bin with the battery calibration app (I recall the mV was low, in the 3600 range). I discharged it on the way home and left the display on to run the last couple percent down. It appeared to try and shutdown but ended abruptly. That was the last time I saw any life from my Revo.
The day after its first and only ever root, I did have an odd occurrence which I posted.
Boot Trouble - Rooted After Phone Downloaded OTA, Not Installed
That time, I had not installed a ROM yet but the phone got itself into a boot up funk. Removing the battery, connecting to wall charger, watching buttons flash ~5 times, disconnecting (which stopped the flashing lights), then battery in, power on... success! I was hoping that would happen this time around but I haven't been able to.
Full history, being my first root, I used S1C successfully, installed Titanium Backup (ran system and app backup), and RevoToolkit. The phone did download the OTA but I never let it install, instead selecting to delay it by 24hrs when it asked to install. Fearing that deadline and getting one more warning that it wanted to reboot and install the OTA, I went ahead and installed the Revolt ROM 1.0. All went fine, no drama. The next afternoon I thought going to 1.1 was going well too, until this brick hit me.
My hope of hopes is it's just a bad battery and the phone won't respond because the mV is too low. Reading thecubed's comment in his first link (above) how recoverable this phone is lends me hope.
It sounds like a bad battery. I would take it to a verizon store and see if you can try a different battery. If it still will not boot then they should warranty it out for you.
Sent from my VS910 4G using XDA Premium App
P.s. I never do anything for my battery. I charge until full then use until empty. Yesterday with moderate tI heavy use I made it from 6am until 8:30 pm
Sent from my VS910 4G using XDA Premium App
Thanks for the responses. I will be going to VZW shortly to figure this out. This phone is maybe two months old so hopefully the battery is the answer *fingers crossed*
Impressive battery life! At my office, I'm in a bit of a metal cubicle area and a bit low on signal strength. My phones will sometimes use up the battery trying to keep connected, it seems, so I am usually plugged in most of the time.
While I have your ear, thanks for the great work on Revolt ROM. I am very happy with it and look forward to its future development
Good news and bad.
The good news was they swapped in a new battery and the phone worked. Having the warranty, it didn't cost anything.
The bad news is that it looks like there may be another problem. On the way out of the store the battery was indicating 1% so I quickly got it on the charger in the car. Driving home, about 10 minutes later, I got a warning for battery temperature. Thinking the low battery may just be taking a charge and getting hot from that, I turned the car A/C on full, took the back cover off, and kept the phone in the cold air.
In about two minutes, just feet from home, I noticed the display was off. Faintly I could see the battery charge symbol that shows when the phone is powered down and charging, but the backlight was off and I couldn't see if there was any color or animation to it.
As soon as I shut the car off and the power quit, that faint display disappeared, full black, dead. Now it seems it is behaving exactly the same. I haven't fiddled with it much, holding out hope of hopes it can be started and maybe recovered.
Could calibrating the battery at the wrong time have caused something like this? Do batteries have a safety lockout if they overheat? To be fair, I was running an intensive app at the time, Waze GPS. Maybe the battery didn't keep up and the phone decided it was too low and shut off. I will post back after letting it sit, cool, hopefully charge, and see what comes of it.
My phone is behaving exactly the way you describe too. A couple of days with Revolt 1.1, and this is the only problem. I had my phone hooked to a lithium ion usb battery pack all day, and it showed "100%" while hooked up, but as soon as I disconnected the battery pack, the battery icon changed to red, then it refused to boot like the situation described in the Revolt 1.1 thread in Development. It also would not go into charge mode on the battery pack, but when I came home and hooked it to a genuine AC adapter and it went into power-off charge display. I'm going to give it a few hours on the charger before I attempt to boot it again, and I'll report back.
Still no luck. I haven't charged it too much yet for fear that it isn't charging properly. Seeing the new battery work for about 20 minutes yesterday lent me hope that if I figure out how to get a fresh battery in or just shell out for another new one, I can have a window of opportunity to change ROMs and see if that has anything to do with it.
This morning I got out my digital multimeter to measure the battery pos to neg and am getting nothing (unless you consider 0.01v something). I tested my old LG clamshell's bulging, old, and damaged 1000mAh battery and it reads 3.99v but couldn't keep my old phone up (lacks oomph now).
Comparing that battery to the Revo's, they have the same four contact pattern but different connection scheme which just stops contact when test fitting. After shaving down its casing on the bottom a little bit, it was just enough to make contact. Using four hands (yes, I am very talented ) to hold the phone, hold the test battery properly, and hold the power button, I was able to get the power-up vibration and the first LG splash screen. We lost it after that but that's likely due to the very weak test battery and/or losing contact while holding it in the Revo.
Since the spankin' brand-new battery is now reading zero, I'm left second guessing my decision of not shutting the phone down when I got the temperature warning. Maybe these batteries do have an internal protection to prevent runaway failure and it too is trash. I have no experience with this otherwise so this is just guesswork.
I'm contemplating rigging the new battery into my old LG phone to see if it can tell it "all clear" and charge it up. I'll post anything I find out here. Any other suggestions are highly welcome. Still, last ditch, I'm pretty certain I can set up another ROM to flash on the SD ahead of time, get another battery, and Clockwork to test another ROM if it's the phone or ROM. I may have had 20 minutes of uptime on the last battery.
I think I've gotten to the bottom of my problem. It's a syndrome of things that I have hopefully untangled.
First off, I had been messing with Power Manager, and wanted the phone to not sleep or timeout the display when plugged into both AC and USB. I figured that would help when I'm plugged into the computer, but it was probably a bad choice.
Yesterday I was out on a boat, which probably put me into a weak signal area, causing the phone to expend extra energy staying locked on a tower. In addition, I had plugged it into the external USB power pack, and thrown them in a bag together. This did two very bad things: 1) It allowed heat to build up from both the charging and 2) it invoked the "USB powered" Power Manager profile which kept the display active which created both additional heat AND crazy battery drain.
Here's what I think happened:
1. The battery overheated
2. The USB battery pack couldn't charge as fast as the display and radio could suck it out -- so five hours in that mode BOTH drained the internal battery AND tapped into about 30% of the external battery pack.
3. The USB battery pack will not provide enough initial juice to restart a flat-dead, overheated phone, or the firmware "knows" it is hooked to USB and refuses to start the phone -- for some bizarre reason.
So, I think my phone demonstrated normal behavior for a flat-dead, overheated phone, and hooking it up to AC brought it right back to life -- after about 5 hours of continuous charging. The battery also got very warm during charging -- more than I recall feeling ever in the past.
I'm hoping there is nothing that software power management could have done to physically damage the battery, but I assume Verizon would claim it could -- as part of the reason they forbid system modifications, and therefore withdraw their warranty if you modify.
At this point I think I have dodge a bullet, and my phone is fine -- other than a few of the quirks others are seeing in Revolt 1.1 (Phone occasionally FC, etc.)
Good to hear your phone is fine. Seems like mine is too as posted above but time will tell. I got the Revo battery set up and charging on my old phone. It seems to be connected well enough. The phone complained the first try that there was no battery but my second try has it displaying that it is charging. The battery isn't warm at all but maybe that's due to a different charging rate for the old phone's 1000mAh battery vs. the Revo's 1500mAh. Or, it really isn't connected perfectly. We shall see.
Success. The surrogate charge setup got the Revo battery up to 4.11v and indicated charge complete. The Revo completed a full boot on the battery and appeared normal.
Not normal was quick heating (still unsure of the cause). Going straight to Battery Calibrator, it indicated 68% and around 3.7v and falling. Not wanting to push my luck, I shut it down. Battery now read 3.9v. Not bad but it sure seems to be getting drained quickly which would explain all the heat. Going to set up later and see if I can get it back to stock and see if the behavior persists.
I don't know how to fix any of your issues but I would like to say thanks for giving such a detailed display of what you've been doing to fix this problem should anyone else run into this issue. Also, That picture in you one post: That is the most jerry rigged set-up to charge a phone I have ever seen in my life and I love it. Good luck getting your phone working I hope everything turns out for the best.
You're welcome. It was a bit of impromptu brainstorming with some fellow tinkerers that helped come up with a way to test charge the battery. Having it come back to life
I've come to a conclusion. Somehow, I think when the battery overheats, it must internally soft protect itself. Charging it on the old phone reset it and then it worked again on the Revo. Why the old phone works and not the Revo, unsure. That would at least explain why the battery tested at zero volts before the charging rig.
After many starts and stops on my Revo now, I have found that what was heating up first was the casing of the phone. I'm guessing heat conduction of heat from the processor as it wasn't the display which was set to minimum brightness (those are the main heat sources, right?). Looking into Settings > About > Battery Stats, it only showed Android System at 98%. It seems like the processor got locked into some some high power continuous use situation which survived reboots.
The battery gets hot later due to the high consumption and proximity to the hot casing (processor), especially with the back on. Withing 1-2 minutes from start, the sides of the phone would be quite warm and after 5 minutes becomes concerning. It seems that's why the battery was never able to get to 100%, but instead its percentage was always falling, phone over consuming greater than charge rate.
With the processor going full tilt, battery cover on, protective case on phone, sitting in a warm car without A/C, that got the battery too hot within 20 minutes. It was a similar situation with the prior battery when the problem cropped up.
I don't know what the cause of this predicament was in the first place however. The phone was plain stock, then rooted, later flashed Revolt 1.0, then Revolt 1.1. Between Titanium Backup, RevoToolkit for CWM, basically nothing unusual, I have no idea how it happened. Maybe I should have done Decrap first since I've read others doing such. Thinking back to my first post/thread, I had a boot issue and only had rooted, Titanium, and RevoToolkit, no ROMs yet.
And, don't get me wrong. I'm not placing blame anywhere, just documenting my "progress." There was a time I was on Revolt where it wasn't behaving this way. I am left without a solid conclusion as to the cause.
How to avoid the battery drain?
I had a similar situation, downgraded and then installed Revolt 1.3. Can't say what did it, but the battery got hot and drained so far it would even start charging.
I got the battery charged on the old phone, and the new one, with Revolt 1.3 is working. But I'm not sure how to make sure the overheating/draining problem doesn't occur again. After 10 minutes the phone is starting to get hot again, battery is down to 57%. With the phone on or off, it does not charge the battery, even with an AC wall charger. With the phone on, it indicates 57% charge, with the phone off, the battery icon just sits at red, no charging is happening. I erased the battery stats in ClockworkMod, but is there anything else to do? Any other ideas?
It sounds like Haxid had it happen and he got back to LG stock and unrooted, all good.
http://forum.xda-developers.com/showthread.php?t=1233668
Mine happened again this time totally dead battery. Trying to get some charge in it now to boot and remove cwm so I can take it to verizon.
Decrap 1.0 rom this time w/ CWM
I do not believe it is the rom. It has to be an app or hardware.
Were you having spontaneous reboots? That's when it happened to me, after a spontaneous reboot.
Good luck. Hope it all works out.
Bait-Fish said:
Were you having spontaneous reboots? That's when it happened to me, after a spontaneous reboot.
Good luck. Hope it all works out.
Click to expand...
Click to collapse
No my phone is actually super stable it just is sucking battery like its candy. Been off charger only 1 hour right now and its down to 83%. It has to be an app doing it but I have no idea which one. The phone shows 64% battery usage by android system.
When mine was hogging battery, same here. All I saw was Android process.
just to add my 2 cents here. I noticed my phone draining like crazy, I tried everything, then I changed the battery. boom. everything is now stable. I'm going to try to exchange that battery I think its my drain and reboot culprit.
I'm getting some strange activity on the watch:
When it runs out of battery and shuts down, I place the watch on the charging cradle while it is off, and it starts to charge as normal. It slowly charges up to 25% as usual, and then suddenly it's at 100%!!
When I boot up the watch it is at 100%, but then starts to lose charge very quickly. It's almost like the battery has become uncalibrated. I have tried running it down and then fully charging it while off and leaving it on the charging cradle for hours etc, but no help.
Anyone else with this problem, and any suggestions? (Can't send it in for warranty repair etc... cos I live in UK where they don't sell it, so had to buy it off eBay, it's a W280A which had an AT&T sim in it)
I think I may have fixed this, I'll have to wait and see how long a full charge lasts, but for the first time while powered off, it charged from 1% to 100% by 1% each time, I know because I watched it - it's been driving me crazy! So something had screwed the calibration of the battery it seems!
The fix was to keep the watch on until it powered itself off with no battery. Then try holding down the centre crown and turning it back on again - mine would get to the Google Circles on the boot animation, and then black out again - and I did this repeatedly, with the LG logo flashing up, then Google, then the circles, then it turned itself off again - so I knew there was more battery there (yes, I know these batteries keep a reserve so they are never fully discharged, and it's not good to take them all the way down, but I was only getting the thing to charge 20% or so before it showed 100). So I thought, how to keep the screen on, I can't keep turning it on again and again.
So I put it in fastboot mode, hold down the centre button and the lower button and it will bring up the fastboot screen - and I left it with the screen on, which seemed for like hours. When the screen finally went off, I tried turning it on, no LG logo screen, tried booting into fastboot, nothing - the watch was truly dead! So I held my breath and placed it on the charger. After a few moments, the white flashing ring appeared and 1% appeared in the centre, yaay!! I then watched it, repeatedly every few minutes pressing the centre crown to check the battery while it cycled through every percent until it reached 100! Now the watch is on and I am monitoring the discharge. I will let you know how it goes (before I couldn't get more than 4 or 5 hours out of it with all sensors off!)
So for all those that are getting exceptionally poor battery life out there, your watch may be lying to you - when it runs out of juice and powers off, before charging it again, turn it on again and again until nothing appears on the screen, or enter fastboot/recovery and the let the screen drain the rest of the battery. Obviously I take no responsibility if it messes up your watch.
I can confirm that this has fixed the problem. I'm getting easily one day out of the watch now, even after going out for a 2 hour half marathon mid day. This watch rocks now!
admisi said:
I can confirm that this has fixed the problem. I'm getting easily one day out of the watch now, even after going out for a 2 hour half marathon mid day. This watch rocks now!
Click to expand...
Click to collapse
I tired your procedure but no luck
Also can confirm the fastboot drain worked - took 3+ hours (I went to bed) on high brightness but then recharged in about 2 hours and has 60% left after 8 hours use (battery saver and I turn screen off manually).
Thank you Admisi I might try this for other devices forgetting where the bottom of the battery is. Good stuff.