Greetings to all
I have a problem, a year ago I gave my HTC Vivid to my son, and two months ago he told me that the termial not connected to wi-fi, I went to a technical and told me it was not a hardware problem.
I decided to read about the problem and found a tutorial that mentioned the loss of some files from the root of termial, specifically; Device / etc / wifi / (wpa_supplicat.conf) and (p2p_supplicant.conf)
Using ES File Explorer discovered that not any of the files (supplicat.conf) and Wi-Fi says "Enable Wi-Fi ..." all the time.
My question is ... Can someone share me those files using the forum?
or personal email ... [email protected]?
They must be specifically HTC Vivid, since they are not compatible with any terminal, each manufacturer and model has its own files (supplicat.conf)
Thanks in advance for any help ...
:good::good::good:
alosegon said:
Greetings to all
I have a problem, a year ago I gave my HTC Vivid to my son, and two months ago he told me that the termial not connected to wi-fi, I went to a technical and told me it was not a hardware problem.
I decided to read about the problem and found a tutorial that mentioned the loss of some files from the root of termial, specifically; Device / etc / wifi / (wpa_supplicat.conf) and (p2p_supplicant.conf)
Using ES File Explorer discovered that not any of the files (supplicat.conf) and Wi-Fi says "Enable Wi-Fi ..." all the time.
My question is ... Can someone share me those files using the forum?
or personal email ... [email protected]?
They must be specifically HTC Vivid, since they are not compatible with any terminal, each manufacturer and model has its own files (supplicat.conf)
Thanks in advance for any help ...
:good::good::good:
Click to expand...
Click to collapse
Your chances of having someone on here with this phone on stock are minimal...
My suggestion would be to grab one of the custom roms in the development section and look through the zip file for the config files you need...
For troubleshooting sake... Make sure its the same version of Android...
Sent from my Nexus 6 using Tapatalk
Related
Hey everyone, since yesterday I've been having some issues and I hope you can help me with it...
My Captivare wont let me send sms or calls, and on the screen says "mobile network not available"I was using the CM7 last build, so all I did was flash it again, hoping that would solve the problem, but that didn’t do anything, later I tried going back to Stock... so I used Odin to go back to 2.2, but now my phone says ” PHONE NOT ALLOWED MM#6” when it boots, and when I try to call someone says “data network not available”.
When I use the SIM in another phone works perfect, so the network is working.
What can I do to fix this ??
Sorry for my english
Sounds like your IMEI is incorrect. Some carriers outside the US do block the generic IMEI for Captivates. Try checking these posts and see if that helps you fix it. If not, Mobiletechvideos can rebuild your IMEI for a fee.
http://forum.xda-developers.com/showthread.php?t=1264021
http://forum.xda-developers.com/showthread.php?t=881162
@Red_81 Mobiletechvideos build IMEI for free where and from when did they started this for free, the charges are $30 in the link posted by u.
ridhi said:
@Red_81 Mobiletechvideos build IMEI for free where and from when did they started this for free, the charges are $30 in the link posted by u.
Click to expand...
Click to collapse
Huh? Can I get a translation? I'm guessing English isn't your first langauge and it is making it hard for me to understand the point you're trying to get across.
Where and from when did they started this for free? ??????
I don't think they do it for free. But I would love it if they did because I will be using their service sometime in the future.
Ridhi, I think the misunderstanding is that Red_81 said MobileTechVideos will do it for a fee, not that they would do it for free.
Reading and comprehension are two skills that are sadly lacking in the forums.
ridhi said:
@Red_81 Mobiletechvideos build IMEI for free where and from when did they started this for free, the charges are $30 in the link posted by u.
Click to expand...
Click to collapse
He said "for a fee," not "for free."
Apologies friends i think i need to get the eye test done.
Hi everyone again, after 3 days of struggle with my phone I've been able to fix it.
Red_81 thanks for you response the problem was the IMEI but none of the links you gave me works for me
After a lot of searching I found a guide that solves the problem of my phone these are the steps:
- Make sure you are on Froyo (whatever ROM, it worked for me on the stock UCJI6 )
- You need to be Root and have Busybox installed
- Now download the version of Galaxy_S Unlock that is at the end of this post into your phone
- Go to your download folder and click to unzip, then launch the .apk file
- If Android doesn't let you install go to Settings > Applications > tick Unknown sources and try again
0. Go to the tab > Signal fix problem
1. Save efs folder
2. Delete nv_data.bin files + reboot
3. Restore data + reboot
4. Create bak files
- Last step that is "restore efs folder" is only there for if the fix didn't work. It's very clear in the app.
That's it !
Now my phone is fully functional thank to this guide and Thanks all who tried to help me.
Source of this guide: darkyrom.com/community/index.php?threads/imei-issue-showing-004999010640000-instead-of-unique-original-number.1876 (the forum don't let me post a link...)
Did you get the original IMEI back for your phone or do you have the test one that starts with 0049?
Sent from my SAMSUNG-SGH-I897 using XDA App
It's the test one but works fine.
Do you know wich may be the consecuences if I keep this IMEI ?
There shouldn'tbe any issues with that one staying on your phone. Some other carriers block this IMEI but none of the American carriers seem to.
Sent from my SAMSUNG-SGH-I897 using XDA App
Felixcm88 said:
Hi everyone again, after 3 days of struggle with my phone I've been able to fix it.
Red_81 thanks for you response the problem was the IMEI but none of the links you gave me works for me
After a lot of searching I found a guide that solves the problem of my phone these are the steps:
- Make sure you are on Froyo (whatever ROM, it worked for me on the stock UCJI6 )
- You need to be Root and have Busybox installed
- Now download the version of Galaxy_S Unlock that is at the end of this post into your phone
- Go to your download folder and click to unzip, then launch the .apk file
- If Android doesn't let you install go to Settings > Applications > tick Unknown sources and try again
0. Go to the tab > Signal fix problem
1. Save efs folder
2. Delete nv_data.bin files + reboot
3. Restore data + reboot
4. Create bak files
- Last step that is "restore efs folder" is only there for if the fix didn't work. It's very clear in the app.
That's it !
Now my phone is fully functional thank to this guide and Thanks all who tried to help me.
Source of this guide: darkyrom.com/community/index.php?threads/imei-issue-showing-004999010640000-instead-of-unique-original-number.1876 (the forum don't let me post a link...)
Click to expand...
Click to collapse
Will try this, Thanks!!
Hope it works for you too
Hello im looking for some info with the optmius 2x (p990) and superoneclick rooting program.
They are-
ONE can you use this to "unlock" your phone? as in us it with diffrent carriers and what not?
Can you remove it if you want?
i have looked around but noting came up with the exact model and unlocking, im sorry i am quite new at the android scene but i do somewhat know the just of it.
No, ir does not unlock your phone. It gives you root permissions, it like administration permissions in windows, so you can install and do a bunch of stuff otherwise you wouldn't be able to.
I don't know how to unlock the phone but if it was easy to do I guess I'd already know
Sent from my Optimus 2X using XDA
For unl**k all sim could probably work this way
try change rom with smartflash and replace file .ap e .cp and erase entire AP
(erase entire AP command delete all information imei etc ... to rewrite only imei. I have tested and work on p990 because for error I have press on erase AP : http://forum.xda-developers.com/showpost.php?p=20815755&postcount=26)
this program rewrite the file baseband (network) and get open market software
I'm not sure that it works, and not sure if it is legal!
For all I know, all Android devices are unlocked.
A friend of mine bought a Nexus S locked to a certain network provider in Portugal, got home and just stuck a Vodafone Portugal SIM card in and voilá!, worked without a problem.
Even if it wasn't this easy, you can always flash your BB to a open version, so I really don't see any issue for unlocking a device.
Don't forget: rooting and unlocking are two different things...
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
Hi do you know if I can root the 2.3.5 with superone click or its just work on 2.2?!
Sent from my Optimus 2X using XDA
I have just moved this question here from the General section, hope that's the right move.
I have just managed to root my old LG P880/4xHD using advice from this forum. Thought I would try on an old phone first. One reason I tried is because I cannot update Android via the usual About phone, Software updates, Check now for updates. The Android version installed is 4.0.3. I am in Australia and it is possible the phone is an overseas model (got it from a friend in LG). Has "Not for Resale" stamped inside the back cover. When I try to update Android, I get an error message "Registered Error - Your device is not registered yet." I had hoped rooting would get around this but it hasn't. Have looked up old forum posts and there is talk of using .kdz files and all sorts of other things. Can anyone help me get around this registration issue but please be aware I am a novice and most of the older posts I read, I couldn't understand, so simple explanations please. Thanks, Peter
pdonahue said:
I have just moved this question here from the General section, hope that's the right move.
I have just managed to root my old LG P880/4xHD using advice from this forum. Thought I would try on an old phone first. One reason I tried is because I cannot update Android via the usual About phone, Software updates, Check now for updates. The Android version installed is 4.0.3. I am in Australia and it is possible the phone is an overseas model (got it from a friend in LG). Has "Not for Resale" stamped inside the back cover. When I try to update Android, I get an error message "Registered Error - Your device is not registered yet." I had hoped rooting would get around this but it hasn't. Have looked up old forum posts and there is talk of using .kdz files and all sorts of other things. Can anyone help me get around this registration issue but please be aware I am a novice and most of the older posts I read, I couldn't understand, so simple explanations please. Thanks, Peter
Click to expand...
Click to collapse
it is a development edition not a consumer edition. read here .
dont try anything else than root if u dont have good knowledge or u will trash the phone.
I imported my HTC first from America and a major problem I found was that the WiFi didn't work. I was prepared to return my phone citing hardware problems but I waited and instead tried to find a solution by myself. I finally got it working.
This thread is for all others who have the same problem that I did.
Temporary Fix
1) unlock boot loader, root and do s-off
2) you must be running ruu 1.08.502.1
3) make your way to http://forum.xda-developers.com/showthread.php?t=1445766
There you can see many people have the similar problem.
Follow the instructions and install the app by the OP
(Make sure push the wifix app in the /system/app folder) verify the app is working properly by dialing the code given in the other thread. Open the wifix manager and set code to 'us'
4) if you read the thread you will see the app works for android 4.0 but most users having jellybean report it as not working
5) try the steps of post #250 (I used the AT&T code)
6) now whenever you restart make sure WiFi is switched OFF before reboot. When your phone boots up again make sure you're getting network signals, then open the market changer app and select AT&T. Then turn on the WiFi.
7) your Wi-Fi can see and connect to access points!
--------------------------------------------------------------------------------------------------------------------------
UPDATE 13/5/2014
WIFI NOW WORKS 100%
Ok with a lot of digging around I finally managed to fix my wifi. Sim inserted or not, wifi on/off at reboot or whatever, it doesn't matter because wifi always works. And no need for any annoying apps to run at boot!
For this method I had to endure a lot of headaches -_-
Had to search the whole internet, learn about adb commands, logcat, compiling .jar files etc
1) unlocked bootloader, rooted , s-off and running deodexed 1.08.502.4 . I did this on a clean install with no wifix/wifi codes/market unlocker
2)
First you have to learn how to compile and extract jar files:
http://forum.xda-developers.com/showthread.php?t=2251719
You just have to read "1. How to Decompile and Recompile *.jar file or classes.dex"
3) THIS STEP NO LONGER NEEDED *Removed*
4)
You need to read this too:
http://forum.xda-developers.com/showthread.php?t=2628707
modify "framework2.jar" which is present in /system/framework
And after you have decompiled, open on your PC
classout/com/android/internal/telephony/MccTable.smali
recompile framework2.jar , put it back in androids /system/framework and set permissions to Rw-r-r
Now we have to modify another file
This time its the /system/framework/framework.jar
after decompiling open in PC : classout/com/android/net/wifi/WifiStateMachine.smali
and edit as per the second post in the link, recompile and paste it back into system/framework,set permissions to Rw-r-r
Note : its best to use adb commands to copy and paste the framework files from android to PC and vice versa
(namely adb pull and adb push)
then do some extra steps:
"Extra step 1
click on "/system/build.prop" and open in any text editor(on android);
seek line
ro.product.locale.region=GB
and change GB to US; confirm OK for save file.
mount /system R
Extra step 2
because of first boots, in Settings database is written our country code,
which should be US.
for this: install "Sqlite Editor" (android app), run, grant ROOT access. after program finds
& lists databases, look for & open "Settings Storage" > settings.db > global:
find "wifi_country_code", select it and press menu button > Edit Record;
change value to US and press "save" "
Reboot.
Congrats!! Wifi now works no matter what you do!
(as long as your wifi is on channels 1-11 , if youre on channel 12 or 13 then I think you need to change wifi country code to an european country instead of 'us')
Note: Be sure to thank the original authors in the threads i've linked.
As usual, do these steps at your own risk, I am not responsible for your bricked devices. Do report if it worked for you.
Also I know i've made quite a bit of mess. Do tell if you have any problems with the steps. I was thinking about posting my own framework.jar and framework2.jar but i'm not sure if they are safe to share or they contain private data. I'll need to confirm from someone.
dramon said:
I imported my HTC first from America and a major problem I found was that the WiFi didn't work. I was prepared to return my phone citing hardware problems but I waited and instead tried to find a solution by myself. It took me 4 days but I finally got it working.
This thread is for all others who have the same problem that I did.
Here is what I did:
1) unlock boot loader, root and do s-off
2) you must be running ruu 1.08.502.1
3) make your way to http://forum.xda-developers.com/showthread.php?t=1445766
There you can see many people have the similar problem.
Follow the instructions and install the app by the OP
(Make sure push the wifix app in the /system/app folder) verify the app is working properly by dialing the code given in the other thread. Open the wifix manager and set code to 'us'
4) if you read the thread you will see the app works for android 4.0 but most users having jellybean report it as not working
5) try the steps of post #250 (I used the AT&T code)
6) now whenever you restart make sure WiFi is switched OFF before reboot. When your phone boots up again make sure you're getting network signals, then open the market changer app and select AT&T. Then turn on the WiFi.
7) your Wi-Fi can see and connect to access points!
Well that's what I did. As usual, do these steps at your own risk, I am not responsible for your bricked devices. Do report if it worked for you
Click to expand...
Click to collapse
Salaam bro how are you?? i also found the solution but for me its Wificodes and Market unlocker both together and its done wifi working..but one thing is your GPRS working?
Optimus said:
Salaam bro how are you?? i also found the solution but for me its Wificodes and Market unlocker both together and its done wifi working..but one thing is your GPRS working?
Click to expand...
Click to collapse
Lol that's exactly what I posted above.
No, I don't really use data and it isn't activated anyways. Why, does the gprs not work?
Sent from my HTC first using Tapatalk
dramon said:
Lol that's exactly what I posted above.
No, I don't really use data and it isn't activated anyways. Why, does the gprs not work?
Sent from my HTC first using Tapatalk
Click to expand...
Click to collapse
well my wifi works now but GPRS on my warid doesnt connect may be its the settings i need to get them done by warid franchise?
Optimus said:
well my wifi works now but GPRS on my warid doesnt connect may be its the settings i need to get them done by warid franchise?
Click to expand...
Click to collapse
I don't have gprs enabled, but when I get recharge my balance I'll activate a package and then update you
Sent from my HTC first using Tapatalk
dramon said:
I don't have gprs enabled, but when I get recharge my balance I'll activate a package and then update you
Sent from my HTC first using Tapatalk
Click to expand...
Click to collapse
Thanx bro do let me know .. btw is ur htc one x + international one or the At&t one?
Optimus said:
Thanx bro do let me know .. btw is ur htc one x + international one or the At&t one?
Click to expand...
Click to collapse
I don't have the HTC one, I have the HTC First
Sent from my HTC first using Tapatalk
Optimus said:
Thanx bro do let me know .. btw is ur htc one x + international one or the At&t one?
Click to expand...
Click to collapse
Gprs works. Go to Apn and enter grps settings. Data should work then
i have same problem when i insert sim card i lose wifi after remove sim wifi working
i try some roms but no success
i read that thread write solution on first post
i try but not working there is any other solution i have 2 phone in my hand
thanks in advance
I finally found the solution... update to android 4.2.2..
Optimus said:
I finally found the solution... update to android 4.2.2..
Click to expand...
Click to collapse
We are skipping that and going straight to 4.4
Sent from my HTC first using XDA Premium 4 mobile app
russian392 said:
We are skipping that and going straight to 4.4
Sent from my HTC first using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Do we have 4.4 for At&t HTC One X+ ?
Optimus said:
Do we have 4.4 for At&t HTC One X+ ?
Click to expand...
Click to collapse
Nope. But as far as I'm concerned loir is building 4.4 instead
Sent from my HTC first using XDA Premium 4 mobile app
dramon said:
I imported my HTC first from America and a major problem I found was that the WiFi didn't work. I was prepared to return my phone citing hardware problems but I waited and instead tried to find a solution by myself. It took me 4 days but I finally got it working.
This thread is for all others who have the same problem that I did.
Here is what I did:
1) unlock boot loader, root and do s-off
2) you must be running ruu 1.08.502.1
3) make your way to http://forum.xda-developers.com/showthread.php?t=1445766
There you can see many people have the similar problem.
Follow the instructions and install the app by the OP
(Make sure push the wifix app in the /system/app folder) verify the app is working properly by dialing the code given in the other thread. Open the wifix manager and set code to 'us'
4) if you read the thread you will see the app works for android 4.0 but most users having jellybean report it as not working
5) try the steps of post #250 (I used the AT&T code)
6) now whenever you restart make sure WiFi is switched OFF before reboot. When your phone boots up again make sure you're getting network signals, then open the market changer app and select AT&T. Then turn on the WiFi.
7) your Wi-Fi can see and connect to access points!
Well that's what I did. As usual, do these steps at your own risk, I am not responsible for your bricked devices. Do report if it worked for you
Click to expand...
Click to collapse
Not Working...
same here not working i tried on both official and custom rom that solution but not working
any other solution or working kernel ?
with sim card wifi not work
imeicodes said:
same here not working i tried on both official and custom rom that solution but not working
any other solution or working kernel ?
with sim card wifi not work
Click to expand...
Click to collapse
Details?
Thread updated
@moonmoon8 @imeicodes
Optimus said:
I finally found the solution... update to android 4.2.2..
Click to expand...
Click to collapse
Can you post here tested 4.2.2 rom link here that fixes the WIFI problem with SIM card?
Wifi solution
..::Angel::.. said:
Can you post here tested 4.2.2 rom link here that fixes the WIFI problem with SIM card?
Click to expand...
Click to collapse
Salaam, here is the link (http://forum.xda-developers.com/showthread.php?t=2023889&highlight=boot+img) but you should know how to root and then put a custom rom..furthermore this is a rom for AT&T htc one x + NOT for the international one ok..this rom worked for me since mine is AT&T version....i hope the same goes for u. dont forget to hit thanks ...goodluck
Optimus said:
Salaam, here is the link (http://forum.xda-developers.com/showthread.php?t=2023889&highlight=boot+img) but you should know how to root and then put a custom rom..furthermore this is a rom for AT&T htc one x + NOT for the international one ok..this rom worked for me since mine is AT&T version....i hope the same goes for u. dont forget to hit thanks ...goodluck
Click to expand...
Click to collapse
Walikum assalam,
Did you mean this rom worked with HTC First aka MYST_UL ??? Thanks!
Good evening folks,
How do I get UMS on a Stock T-Mobile Note 4 TW Firmware with TWRP 2.8.7.0 and SuperSu 2.64?
After many attempts and trial and error, using http://forum.xda-developers.com/note-4-tmobile/general/dok2-5-1-1-setup-t3272388 I got there as to what my title says. However, I do not know how to get UMS. That is the question here.
Now, the final goal and issue to solve is that my four year old inadvertently deleted all my pictures (I know, I should have them backed up like I do with the Mac at home with four copies of all the family pictures, ) . Now I think that if I get my Note 4 to be recognizable as a regular USB in my Mac or PC, I should be able to recover most if not all the files in the DCIM since I have not written nor used the phone since then. My original thought was/is that getting root access I should be able to get UMS, but have not succeeded.
Any help you can provide is greatly appreciated !!!
Cheers,
G.
C'man folks, any help here is greatly appreciated !!!
Please !!!!!
Cheers,
G.
GoyoNeuff said:
Good evening folks,
How do I get UMS on a Stock T-Mobile Note 4 TW Firmware with TWRP 2.8.7.0 and SuperSu 2.64?
After many attempts and trial and error, using http://forum.xda-developers.com/note-4-tmobile/general/dok2-5-1-1-setup-t3272388 I got there as to what my title says. However, I do not know how to get UMS. That is the question here.
Now, the final goal and issue to solve is that my four year old inadvertently deleted all my pictures (I know, I should have them backed up like I do with the Mac at home with four copies of all the family pictures, ) . Now I think that if I get my Note 4 to be recognizable as a regular USB in my Mac or PC, I should be able to recover most if not all the files in the DCIM since I have not written nor used the phone since then. My original thought was/is that getting root access I should be able to get UMS, but have not succeeded.
Any help you can provide is greatly appreciated !!!
Cheers,
G.
Click to expand...
Click to collapse