YaYPrime is based on the oficial 3.4.0 mr1.1 kernel from google, with the commits needed to run in android 6.0.
With Android M, all the kernes have merge the commits to be compatible with it, so in my case, I prefer to start a new one from 0, making the phone feel smooth while having a good battery life.
Features:
- Based on official 3.4.0 mr1.1 mako kernel
- Compiled using the lastest version of uber 5.3.1, optimized for cortex-a15
- Anykernel2
- Mako_hotplug as hotplug
- FranciscoFranco's thermal
- FranciscoFranco's gamma control
- Frequency limitator on screen-off (1026mhz by default)
- Voltage control
- Cpu Overclock of 1.7ghz (1.5ghz by default)
- Cpu Underclock of 192mhz (384mhz by default)
- Gpu Overlock of 480mhz (400mhz by default)
- Ondemand, simple and performance as gpu governors
- Ondemand, performance, conservative and interactive as cpu governors
- Deadline, zen, fiops, cfq, bfq, row as i/o schedulers
- Stratosk's Ondemand governor version (by (default)
- Franco's Convervative governor version
- Taurus' Interactive governor version
- Faux's Sound Control
- Readhead set in 512kb by default
- Graphite and neon optimizations
- UsbOtg support
- Kexec (multirom)
- DT2W support
- Fastcharge support
- F2FS support
- A lot of improvements and optimizations
Downloads:
AOSP: https://www.androidfilehost.com/?w=files&flid=42219
CM: https://www.androidfilehost.com/?w=files&flid=47776
Installation:
If you come from another kernel:
- Reboot in recovery mode
- Dirty-flash the rom you are using (without wipes)
- Flash kernel
If you come from a previous version:
- Reboot in recovery mode
- Flash kernel
(If you find something weird, wipe dalvik/cache)
To configure the kernel I recommend using kernel auditor.
Thanks: @hellsgod (kernel base), Google, Uber, @txuki2005, @serbalabari, @mrraine, @CallMeAldy, @zaclimon, @Flashhhh, @hurtsky, @franciscofranco, @faux123, @stratosk, @neobuddy89, @dorimanx, @osm0sis (anykernel2), and all the people that contribute with their commits.
Finally, I'm not responsible for any damage that can happen to your phones, I use the kernel as a daily one and I don't have any problem.
XDA:DevDB Information
YaYPrime-M Kernel, a kernel for the Google Nexus 4
Contributors
yaymalaga
Source Code: https://github.com/yaymalaga/yayPrime_kernel
Version Information
Status: Stable
Created 2015-10-25
Last Updated 2016-01-15
Changelog:
R3
- Re-done from R1
- Fixes everywhere, no more lags on chrome
- Build using latest Uber 5.3.1 (optimized for cortex-a15 - compiled by me)
- Merged all patches from 6.0.1 and the latest ones from 3.4 branch
- Added cpu underclock to 192mhz (325mhz by default)
- Updated interactive governor (ondemand by default)
- F2FS support (Need to be tested)
- Core optimizations (mutex, futex, sched, etc)
- Selinux improvements for smoothness
- Cfq i/o scheduler optimized (the other ones are removed until next release)
- Added missing Faux soundcontrol commits
- Cpu management improvements
- DT2W and T2W
- CM version added
Old releases:
R2:
- Compiled using lastest uber 4.9 (compiled by me, optimized for cortex-a15)
- Graphite and neon enabled
- Makefile and flags optimizations
- Compiler and cortex-a15 optimizations
- A lot of optimizations in the I/O, and new schedulers:
Row added and tuned up
Deadline updated and tuned up
Cfq updated and tuned up
Bfq (v7-r8) added and tuned up
Zen added and tuned up
Fiops added and tuned up
- Kexec support
- DT2W support (from Stratosk)
- Fastcharge support
- OTG support (theoretically)
- Interactive governor fixes (now uses lower freq)
- Fixes and optimizations for camera, gpu, etc
- Some improvements in general
R1:
- Initial version
Any plans to add different governors like zzmome, scary, SmartassV2, SmartMax, etc?
---------- Post added at 08:28 PM ---------- Previous post was at 08:28 PM ----------
Also, thanks for the new kernel!
thatkindaguy said:
Any plans to add different governors like zzmome, scary, SmartassV2, SmartMax, etc?
---------- Post added at 08:28 PM ---------- Previous post was at 08:28 PM ----------
Also, thanks for the new kernel!
Click to expand...
Click to collapse
Just try "hellsactive" and see for yourself what smoothness really looks like.
dragos281993 said:
Just try "hellsactive" and see for yourself what smoothness really looks like.
Click to expand...
Click to collapse
Not looking for smoothness - Looking for a good battery and performance balance. The best Governor I've found for that is zzmove with ybat as the profile number, and not a single kernel for mako includes zzmove
Nice kernel man been running for 24 hours now using hellsactive profile working very well.
Tapped from my marshmako
Looking impressive. Working gr8 till now.. Keep up the good work.
thatkindaguy said:
Any plans to add different governors like zzmome, scary, SmartassV2, SmartMax, etc?
---------- Post added at 08:28 PM ---------- Previous post was at 08:28 PM ----------
Also, thanks for the new kernel!
Click to expand...
Click to collapse
Maybe I will include smartmax from ak kernel in the next release
@yaymalaga is it safe to flash directly coming from hellscore b85? For some reason I can only dirty flash if I wipe system also and flash rom + Gapps.
Sent from my Nexus 4 using Tapatalk
Is it just me or unknown is the one really shown on the kernel version on about phone?
Sent from my Nexus 4 using XDA Free mobile app
russells.android said:
Is it just me or unknown is the one really shown on the kernel version on about phone?
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
I was ready to ask same think.
Also, for me, settings in 'init.yayprime' does not alter kernel's settings
What rom are you using?
About the unknown name, my bad. I'm looking for what causes the name not to be shown
Cataclysm MM (Nexus 4)
Not a bad kernel,but problem that I have is after some time, videos just stop playing, have to reboot my phone to make them work,didn't happen on stock kernel, using franks 6.0 latest build
Performance is solid with this kernel for me. Nice kernel!
Can we have halfbreed color as default in the next build? The washed out colors are burning my eyes lol
veeholics said:
Performance is solid with this kernel for me. Nice kernel!
Can we have halfbreed color as default in the next build? The washed out colors are burning my eyes lol
Click to expand...
Click to collapse
Use Synapse or Kernel Auditor or any other kernel tweakers, you can change the colors from the app.
This kernel has USB otg support or not? I've installed synapse and kernel adiutor and didn't found any way to enable USB otg.
I'm using it with pure ROM.
Sent from my Nexus 4 using Tapatalk
sidnoit22 said:
Use Synapse or Kernel Auditor or any other kernel tweakers, you can change the colors from the app.
Click to expand...
Click to collapse
I know that. What I actually meant is the gamma colors that is included within the kernel. That way, it will apply all accross the phone.
If you just change it with an app, it will not apply to recovery and all other things before booting android. That's quite a big deal for me.
jolas said:
Cataclysm MM (Nexus 4)
Click to expand...
Click to collapse
Well I haven't tested by myself in this rom, but maybe it is using cm performance profile which change the governor configs
g33k0 b3lk0w said:
Not a bad kernel,but problem that I have is after some time, videos just stop playing, have to reboot my phone to make them work,didn't happen on stock kernel, using franks 6.0 latest build
Click to expand...
Click to collapse
I have had the same problem using other kernels, so I think that it's not the kernel fault
mandgeo said:
This kernel has USB otg support or not? I've installed synapse and kernel adiutor and didn't found any way to enable USB otg.
I'm using it with pure ROM.
I think that it does not (we are basing on hellscore kernel right now), but in the near future I will enable it when M kernels manage to adapt it.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
veeholics said:
I know that. What I actually meant is the gamma colors that is included within the kernel. That way, it will apply all accross the phone.
If you just change it with an app, it will not apply to recovery and all other things before booting android. That's quite a big deal for me.
Click to expand...
Click to collapse
Sorry, but we are using the google's default gamma, so it will be the default one
Btw, I pretty busy with real life and studies, but I'm looking to change to another base with even more optimizations, when I have time I will do some tests
yaymalaga said:
YaYPrime-M is based in hellsgod's kernel, as it is the perfect base to continue with, so if you like hellscore, then you will love this new kernel.
Click to expand...
Click to collapse
can you/anyone mirror it? AFH currently has server problems
Related
SG-NS-ICS Kernel
Here is what's included in the kernel:
Tweaks:
- Boot @ 1.1Ghz Overclock (Bus 220MHZ)
- 1320 Mhz overclock
- Undervolted to maximize battery life
- Kernel updated to 3.0.22 (new)
- Cold colors
- Cpuidle backport from 3.2 Kernel
- Ext4 and IO tweak backports from 3.2 Kernel
- CIFS Module built-in
- init.d support
- USB On the GO! Build5
- Wifi PM_FAST for faster screen off download speed and compatibility
- Increased refresh rate --> ** Only in HIGH_HZ version **
Governors:
- Ondemand
- Conservative - Default
- Performance
- Lazy
- Smartassv2
- Lulzactivev2
IO Schedulers:
- CFQ - Default
- Noop
- Deadline (tweaked for flash devices)
- VR
- Simple IO
Mods:
- Voodoo Sound V10
- BIGMEM for more available memory
- Backlight Notification
- Backlight Dimmer
- Battery Life Extender
- TouchWake
- Custom voltage
Rules and FAQs
Read before downloading
(Note: I don't wanna be rude, I just want to keep this thread clean...)
Q: What settings do you recommend? What governor? What IO Scheduler?
A: I recommend the default settings. This is why it there by default!
Click to expand...
Click to collapse
Q: My phone as rebooted on its own or is stuck on a reboot loop.
A: There are 3 reason why your phone may reboot on its own:
1. Your phone does not handle the Undervolt of the kernel
Flash the stock voltage add-on. (NO I will not make the kernel with stock voltage by default)
2. Your phone cannot handle the Overclock of the kernel
Use another kernel, Sorry...
3. There is a bug in the kernel and I should fix it:
Post the /proc/last_kmsg output as a ZIP in the thread. BUT, before posting make sure the last_kmsg contains the mention "Kernel panic", if not, don't bother posting this because your problem is related to point 1 or 2...A kernel Panic looks like this:
Code:
[ 4079.850240] Kernel panic - not syncing: Fatal exception
[ 4079.850307] Backtrace:
[ 4079.850504] [] (dump_backtrace+0x0/0x10c) from [] (dump_stack+0x18/0x1c)
[ 4079.850568] r7:00000005 r6:d6b3a600 r5:c0707990 r4:c0741068
[ 4079.850905] [] (dump_stack+0x0/0x1c) from [] (panic+0x7c/0x1a8)
[ 4079.851022] [] (panic+0x0/0x1a8) from [] (die+0x1a4/0x1d8)
Click to expand...
Click to collapse
Q: Why did you remove feature X?
A: Because I think it sucks
* This is my personal opinion and I am allowed to have it
Click to expand...
Click to collapse
Q: Can you add feature X?
A: Depends. Before asking that question, check the changelog.
If it was removed, NO.
* If you have a really good reason why you think a feature should come back from the dead, you can defend your case by PM.
If it's a new feature that I may not know about, just let me know of the feature and I'll consider it.
If its a new shinny CPU governor or IO scheduler, NO the ones that will remain do the job perfectly...
Click to expand...
Click to collapse
Q: What does feature X do?
A: Please try Google or Wikipedia before asking this. The answer is at the tip of your finger tips
Click to expand...
Click to collapse
DownloadsStable Kernels:
SG-NS-ICS_27022012.zip
SG-NS-ICS_27022012_HIGH_HZ.zip
SlimSG_08032012_FS.zip (FileSync Enabled - Safer)
SlimSG_09032012_NoFS.zip (FileSync Disabled - Faster)
Experimental:
* None *
Kernel Add-ons: **Flash in CWM after the kernel.
SG-NS-ICS_StockVoltageMod.zip (new)
SG-init.d-installer
Old kernels:
SlimSG_29022012.zip
SG-NS-ICS_05022012.zip
SG-NS-ICS_05022012_HIGH_HZ.zip
SG-NS-ICS_31012012.zip
SG-NS-ICS_31012012_HIGH_HZ.zip
SG-NS-ICS_14012012.zip
SG-NS-ICS_14012012_HIGH_HZ.zip
SG-NS-ICS_17012012.zip
SG-NS-ICS_17012012_HIGH_HZ.zip
Apps:
Manage this kernel with NSTOOLS. Thx arifhn!
To get USB-OTG working you need USB Host Controller app installed. Thx sztupy!
Thanks to ezekeel, supercurio, morfic, franciscofranco, sztupy, reddv1 and koush which made this kernel possible.
kernel source
Change log:
SlimSG_09032012_NoFS.zip
- Removed FileSync (Faster IO)
- Kernel 3.0.23
- Bring back UV
SlimSG_08032012_FS.zip
- Enabled FileSync (Safer IO)
- Kernel 3.0.23
- Bring back UV
SlimSG_29022012.zip
- Release Slim version of SG kernel. This version is whatever setting I'm running at the moment and everything else removed...
SG-NS-ICS_27022012.zip and SG-NS-ICS_27022012_HIGH_HZ.zip
- Kernel Update to 3.0.22
- Fixed SmartassV2 Sysfs Interface
- Fix in Custom Voltage
SG-NS-ICS_05022012.zip and SG-NS-ICS_05022012_HIGH_HZ.zip
- Kernel Update to 3.0.19
- Use PM_FAST power saving method for WIFI to get Higher throughput and better compatibility.
SG-NS-ICS_31012012.zip and SG-NS-ICS_31012012_HIGH_HZ.zip
- Removed useless Governors
- Removed useless IO Scheduler
- Tuned down conservative and ondemand for better battery life
- Kernel upgrade to 3.0.18
- Updated USB-OTG to Build5
SG-NS-ICS_24012012-NoFSYNC.zip and SG-NS-ICS_24012012_HIGH_HZ-NoFSYNC.zip
- Added V(r) IO Scheduler
- Tweaked deadline IO for flash devices
- Tweaked conservative governor
- IO backport from 3.2
- ext4 backport from 3.2
- ext4 tweaks
- optimized sha1, memcopy, string libs
- TCP tweaks
- Added USB-OTG
- and more ...
SG-NS-ICS_17012012.zip and SG-NS-ICS_17012012_HIGH_HZ.zip
- New CPU Governors: Lagfree, MinMax, Smartassv2, InteractiveX and Lulzactivev2
New Add-on 17012012
- Change boot script to use stock voltage instead of Undervolt. *Requires busybox to be installed
SG-NS-ICS_14012012.zip and SG-NS-ICS_14012012_HIGH_HZ.zip
- Removed GPU OC since it doesn't do anything
- Made init.d support built-in
* Note: You need to have busybox installed for init.d to work. Look for the busbox installer app in the market.
New Add-on 13012012
- Adds init.d support to the kernel
SG-NS-ICS_12012012.zip and SG-NS-ICS_12012012_alternate.zip
- Kernel 3.0.17
- Experimenting with GPU Overclock (now at 250Mhz instead of 200Mhz)
SG-NS-ICS_11012012_alternate.zip
- Include increased refresh rate
- Should have more washed out colors
SG-NS-ICS_11012012.zip
- Back to cold colors
- Remove increase refresh rate, cause colors to look washed out
- Still has the 1320 Mhz
SG-NS-ICS_10012012.zip
- Added Test Voodoo color with green flicker fix
- Added 1320Mhz overclock
SG-NS-ICS_09012012.zip
- Updated kernel to 3.0.16
- Added Cpuidle backport from 3.2 kernel
SG-NS-ICS_06012012.zip
- Remove readahead because it was causing slow down in the UI
- Adjusted OnDemand governor to make it snappier
- Fix to cpufreq to make it more statble
- Added Simple IO scheduler
- Made colors 8500K instead of 6500K
** Note: This kernel is a lot faster than previous ones
SG-NS-ICS_04012012.zip
- BLN
- BLD
- BLX
- TouchWake
- Custom Voltage
- CIFS
- Adjusted Ondemand governor default values
SG-NS-ICS_03012012.zip
** Initial Release **
- 1.1Ghz Overclock
- UV
- Lazy governor
- BFQ v3r1 IO Scheduler
- Voodoo Sound V10
- BIGMEM
- Kernel 3.0.15
- 65 FPS
- 1024K Memory Readahead
Yeah, thank you. Will try it! Love your kernel!
fleischbanane said:
Yeah, thank you. Will try it! Love your kernel!
Click to expand...
Click to collapse
There is definitely still work to be done and room for improvement but it does work.
steve.garon said:
Decided to start a new thread for my ICS 11UV Kernel.
Here is what's included for now:
- Boots @ 1.1Ghz Overclock
- Undervolted to maximize battery life
- Lazy governor
- Added BFQ v3r1 IO Scheduler
- Added Voodoo Sound V10
- BIGMEM for more available memory
- Kernel updated to 3.0.15
- Increased refresh rate
- Increased Memory readahead
Stable Kernels:
** Not tested enough...
Experimental:
SG-NS-ICS-03012012.zip
Thanks to supercurio, morfic, ezkeel and koush which made this kernel possible.
kernel source
Click to expand...
Click to collapse
thanks steve
I'll give it a try and report everything I can find. What's about BLN, BLD and BLX?
Welcome back, SG!
I'm flashing
Sent from my Nexus S using XDA App
fleischbanane said:
I'll give it a try and report everything I can find. What's about BLN, BLD and BLX?
Click to expand...
Click to collapse
Not there yet. Next release I guess...
No voodoo color, nice not good yet on ICS
Sent from my Nexus S using XDA App
Backlight MODs next?
Sent from my Nexus S using XDA App
phone_user said:
Backlight MODs next?
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
It there anyone who's fixed the backlight autobrightness yet?
steve.garon said:
It there anyone who's fixed the backlight autobrightness yet?
Click to expand...
Click to collapse
Eek, I mean BLD, BLN, TW etc
Never mind
Sent from my Nexus S using XDA App
@1.1GHz bus/GPU 220MHz?
Sent from my Nexus S using XDA App
phone_user said:
Eek, I mean BLD, BLN, TW etc
Never mind
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
yes!
nexusphone said:
@1.1GHz bus/GPU 220MHz?
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
and yes!
Good! init.d next version?
Thanks
Sent from my Nexus S using XDA App
How about using Lucid's custom color, cuz Voodoo color not yet stable on ICS?
Thanks for release
http://forum.xda-developers.com/showpost.php?p=20593750&postcount=385
On ICS, LiveOC & Deep_Idle causing "reboot while calling" and will not fixed for many weeks
GLaDOS thread
At SG kernel's 1.1GHz, bus/GPU +10%, 220 MHz! The only kernel presenting the users with smoothness just now and for the time being.
Thanks, Steve
OP Updated.
Code:
SG-NS-ICS_04012012.zip
- BLN
- BLD
- BLX
- TouchWake
- Custom Voltage
- CIFS
- Adjusted Ondemand governor default values
steve.garon said:
OP Updated.
Code:
SG-NS-ICS_04012012.zip
- BLN
- BLD
- BLX
- TouchWake
- Custom Voltage
- CIFS
- Adjusted Ondemand governor default values
Click to expand...
Click to collapse
Thanks for update with the necessary MODs
Initial Release, battery GOOD!!!
---------- Post added at 01:36 PM ---------- Previous post was at 12:52 PM ----------
Kernel_SG-ICS-20120104_init.d.zip
init.d support MOD
Battery efficiency GooD!
Sent from my Nexus S using XDA App
for Moto G
Smooth, power efficient and featured
supporting CM11, CM12 and AOSP Roms
Hotplug Drivers:
- Modified Aero_Hotplug (default)
- Faux's Intelliplug
- MpDecision
Custom Features:
- CPU Underclock
- GPU underclock/overclock
- Default CPU Govs tweaked and optimized
- Add Intelliplug/Intellidemand (tweaked)
- Added SmartAssFalcon (tweaked)
- Added IntelliMinMax (tweaked)
- LCD Kcal Control
- DoubleTap2Wake / Sweep2Wake
- USB Fast Charge
- LCD Notify / PowerSuspend V1.5
- Faux's IntelliThermal V2
- Faux's Sound Control
- Power Efficient WorkQueues
- Added BFQ/SIO/FIOPS/ZEN/VR IO Schedulers
- Ultra Kernel Samepage Merging
- Extra ram free (reduced loggers)
- Kexec patched (only CM12 version)
Optimizations:
- Updated to last CM11/CM12 developement
- Built with Linaro 4.9.3 / Gcc 4.9 (ArmV7 optimized) - Sabermod 4.8.4
- Performance & Energywise flags systemwide (+O2/+O3)
- TCP optimizations (faster locks, balanced power comsumption)
- Heavily tweaked and optimized workqueues
- Sched powersave and performance tweaks
- Kgsl & CpuFreq & Futex optimizations
- Compression & Crypto optimized
- Better ramdomness implementations
- Fixed SimpleOndemand GpuFreq governor
- Added Faux's implementation to msm_cpufreq GpuGov
- Much more (check my git source for further info)
Thanks to:
- Cyanogenmod team, AOSP and Motorola Mobillity LLC, dhacker, savoca, alberto76, yoshishapow, faux123, NeoBuddy, Blechd0se, Quarkx, Klozz, anerik, Shivam Kuchhal, Yank555.lu, Pinkflozd, and so many other great devs (sorry if I'm missing anyone)
DISCLAIMER: Your warranty is now void. I am not responsible for bricked devices, or any other damage you may produce. Read carefully and make sure you know what you are doing. Remember, YOU are choosing to make these modifications, so you responsible for the results. AND PLEASE; AS THIS IS ONLY FOR CM12/CM11/AOSP[/U] BASED ROMS. DO NOT FLASH IT ON STOCK/GPE.
Community 'Niceness' common ground:
- Don't ask for ETAs, remember... patience is a virtue.
- If you got some bug or problem to report, be nice, clear and try to provide evidence I can work with (logcats, etc.)
- If you don't know how to do that, check this link: https://plus.google.com/u/0/+PaulReioux/posts/BcWrhEr1JCz
- If you need some help on how to behave among other XDA people, you can check this too, LOL:
http://www.xda-developers.com/androi...m-user-xda-tv/
XDA:DevDB Information
Donkey Kang Kernel, KERNEL for Moto G
Contributors
fermasia
Source Code
ROM OS Version: 4.4.x KitKat / 5.x Lollipop
Version Information
Status: Beta
Created 2014-11-15
Last Updated 2015-1-10
RELEASES: (developement of this kernel has been discontinued,
and I'll be giving no support for this kernel anymore!!)
THIS LITTLE FILE YOU ARE DOWNLOADING, TOOK A BIG EFFORT.
SO PLEASE, IF YOU APPRECIATE MY WORK, HIT THE THANKS BUTTON) :good:
Version 3.8 - CM12/Aosp Lollipop - [03/01/15]
Version 3.8 - CM11/Aosp KITKAT - [03/01/15]
Version 3.7 - CM12/Aosp Lollipop - [31/12/14]
Version 3.6 - CM12/Aosp Lollipop - [27/12/14]
Version 3.5 - CM12/Aosp Lollipop - [20/12/14]
Version 3.2 - CM12/Aosp Lollipop - [16/12/14]
Version 3 (beta - CM12)
Version 3 (alpha3 - CM12)
Version 3 (alpha - CM12)
Version 2 (beta - CM11/Aosp KitKat)
Version 1.1 - Regular ZIP (CM11/Aosp KitKat)
Version 1.0 - AnyKernel ZIP (CM11/Aosp KitKat) / http://d-h.st/SnK
How to Install
- Boot into recovery (tested on TWRP, should work fine on CWM/Philz)
- Wipe Cache and Dalvik
- Flash .zip
- Reboot & enjoy
CHANGELOGS:
Version 3.8 - KitKat
- Kitkat support resumed, including all features from the CM12 version, except for kexec patches.
Version 3.8 - CM12
- Kexec Hardboot patches applied (multirom compatible)
Version 3.7 - CM12
- Reverted power efficiency patches that were causing SODs
Version 3.6 - CM12
- Sorted out Interactive Gov getting stuck on max freq
- Re-tweaked Aero-Hotplug and IntelliMM tunables
- Applied some battery saving patches
- Built with Sabermod 4.8.4 and back to 02 flags.
Version 3.5 - CM12
- Added Double Tap 2 Wake and Sweep 2 Wake (testing) - disabled by default
- Added USB fast charge (testing)
- Added IntelliMinMax governor and adapted/retweaked it for our device
- Added Intelithermal V2 - enabled by default
- Combined LCD Notify and PowerSuspend (when pwsusp is disabled Lcd Notify will operate)
- CPU underclock
- GPU underclock and overclock
- Various sched, lowmemorykiller and workqueues optimiations
- Built with Linaro 4.9.3, and own optimization flags
- Governors optimized and re-tweaked
- More battery saving and stability optimizations
Version 3.2 - CM12
- Solved random-reboots (as far as I've tested, you might get ocassional problems when toggling the hotplug driver).
- Added Faux's Intelliplug and IntelliActive/Demand governors.
- Now the hotplug drivers are toggleable (mpdecision/aero_hotplug/intelliplug) - Aero_Hotplug is located in userspace (!) in Faux's Control App, or if using Trickstermod, Aero-Hotplug will be active if Intelliplug (and mpdecision, of course) are disabled.
- Default combo: AeroHotplug + Ondemand gov
- Better compression optimizations.
- Samepage merging enabled by default.
Version 3 - beta
- Switched from MyFluxi's hotplug driver to Aero_Hotplug (thanks to @Blechd0se and @Quarx)
- Adpated and tweaked hotplug driver
- Readded powersuspend, bumped to v1.5 and optimized settings.
- IOsched power saving optimizations
- Dumped Intellidemand, Intelliactive, OndemandPlus and Weathley governors (for now)
- Added SmartAssFalcon governor (thanks to @YoshiShaPow)
- CPU Min Freq set to 192000 (again)
- Picked some commits to make the kernel fully compatible with Alberto76's build (to be tested)
- Reworqued workqueues even more, following blechd0ses's implementation for aero_hotplug and added more tweaks
- Added LZ4 kernel compression to fasten bootup process
Version 3 - alpha 3
- Added powersuspend (for now) - got to enable it through any kernel tweaker, thought.
- IOsched optimizations
- Applied several fixes for diff. mem leaks
- Added crypto optimizations
- Added GPU overclock (to be set in any kernel tweaker)
- Min CPU freq set to 192000
- Power efficient workqueues
- Added Faux's sound control support
- Randomness and cpu-freq optimizations (optimized interactive and ondemand governors)
- TCP performance and stability tweaks
- Much more!
Version 3 - alpha
- Based on the official CM12 source (rebuilt from scratch).
- Compiled with Linaro 4.9.2
- Added msm-hotplug (alongside mpdecision, can be toggled)
- Defaulted to 1 cpu and 300000 freq while lcd is off.
- Added LCD Notify
- Optimized GPU / SimpleOndemand GPU gov working with msm-hotplug (not mpdecision)
- Added more IO schedulers
- Added LCD KCAL
- TCP and other various optimizations
Version 2
- Added MSM Hotplug by default - huge thanks to @savoca for his Titan sources and help
- Simple Ondemand GPU governor working fine (no reboots)
- CPU freq lower limit 192000
- GPU max freq 533mhz
- Optimized CPU governors for msm-hotplug
- Optimized workqueues management
- LCD Notify
- Ramdisk tweaks
- A really big bunch of optimizations and fixes to make hotplug more efficient
Version 1.1
- Dropped AnyKernel template.
- Added some ramdisk tweaks and defaults.
Waiting fa tha linkz
OldYellowBricks said:
Waiting fa tha linkz
Click to expand...
Click to collapse
Have just posted the link, check the second post. :good:
Does this kernel have f2fs support??
Sent from my Moto G using XDA Free mobile app
Is the function home2 wake available on your kernel?
You didn't mention which variant it's for.
Does it work on XT1033 with networks?
Sent from my Moto G using XDA Premium 4 mobile app
syrkles said:
Does this kernel have f2fs support??
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
Yes.
Mchasard said:
Is the function home2 wake available on your kernel?
Click to expand...
Click to collapse
If you mean dt2w, no, it's stated in the op.
KDB223 said:
You didn't mention which variant it's for.
Does it work on XT1033 with networks?
Sent from my Moto G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
As it's based on CM11 it should support all variants CM support, so yes, it should.
But as I own an xt1032 I haven't tested, and I'm not familiar with any 1033 specific bugs the CM11 base has.
I'd appreciate your feedback, please.
fermasia said:
As it's based on CM11 it should support all variants CM support, so yes, it should.
But as I own an xt1032 I haven't tested, and I'm not familiar with any 1033 specific bugs the CM11 base has.
I'd appreciate your feedback, please.
Click to expand...
Click to collapse
Okay then. I'll try it out and report.
Sent from my Moto G using XDA Premium 4 mobile app
wifi not turning on. Logs are here:
runnning CrDroid which is CM11 based build date I guess circa 10-29 (which is the latest build for this ROM)
camera and bluetooth is running fine
View attachment 2014-11-09_13.31.zip
OldYellowBricks said:
wifi not turning on. Logs are here:
runnning CrDroid which is CM11 based build date I guess circa 10-29 (which is the latest build for this ROM)
camera and bluetooth is running fine
View attachment 3006288
Click to expand...
Click to collapse
I'm on Crdroid aswell and I'm connected without problems. Try to reboot (or reflash!). So far no problems with the kernel, everything ok! Thank you very much for your work buddy, keep it up
Feyerabend said:
I'm on Crdroid aswell and I'm connected without problems. Try to reboot (or reflash!). So far no problems with the kernel, everything ok! Thank you very much for your work buddy, keep it up
Click to expand...
Click to collapse
gonna try a clean flash of CrDroid and I'll get back in 10 mins I guess okay?
Working great on liquidsmooth milestone. Thanks for the solid work Dev.
Sent from my Moto G using XDA Free mobile app
OldYellowBricks said:
wifi not turning on. Logs are here:
runnning CrDroid which is CM11 based build date I guess circa 10-29 (which is the latest build for this ROM)
camera and bluetooth is running fine
View attachment 3006288
Click to expand...
Click to collapse
Feyerabend said:
I'm on Crdroid aswell and I'm connected without problems. Try to reboot (or reflash!). So far no problems with the kernel, everything ok! Thank you very much for your work buddy, keep it up
Click to expand...
Click to collapse
First, THANKS (I'm gonna cry) for reporting your problem with a logcat and dmesg - lol.
It doesn't look like kernel related, and since Feyerabend got it working, it mustn't be. Try with a fresh & clean install (specially if you've been flashing other kernels, or stuff).
Feyerabend said:
I'm on Crdroid aswell and I'm connected without problems. Try to reboot (or reflash!). So far no problems with the kernel, everything ok! Thank you very much for your work buddy, keep it up
Click to expand...
Click to collapse
Man I tried a clean flash and wifi still doesn't turn on haha. Wonder what's causing the problem (for me at least)
(by clean flash I mean clean for new rom via philz, and flashing crdroid, after that flashing the kernel, and then rebooting)
Just flashed it, EVERYTHING works beautifully - WiFi, camera, network - EVERYTHING.
Thanks a lot Mr. Dev
EDIT : On an (unconverted) XT1033
Sent from my Moto G using XDA Premium 4 mobile app
fermasia said:
First, THANKS (I'm gonna cry) for reporting your problem with a logcat and dmesg - lol.
It doesn't look like kernel related, and since Feyerabend got it working, it mustn't be. Try with a fresh & clean install (specially if you've been flashing other kernels, or stuff).
Click to expand...
Click to collapse
Man I tried a clean flash and wifi still doesn't turn on haha. Wonder what's causing the problem (for me at least)
(by clean flash I mean clean for new rom via philz, and flashing crdroid, after that flashing the kernel, and then rebooting)
Kang-KernelFor Lollipop & Marshmallow
Kang-Kernel is a kernel based off of all the other kernels for moto e, it has commits from multiple kernels for more features/performance.
Features:
Built With UBERTC-5.3
IntelliplugV5 & Alucard Hotplugs
CPU Underclock
Many Governors
Many Schedulers
Power Suspend Driver
Dynamic FSync
DT2W/S2W
USB Fast Charge
AOSP/CM Support
Lollipop & Marshmallow support
Ect
Changelog:
Code:
[B]V1[/B]
Bring Back LCD-Notifier
Added DT2W/S2W
Updated DT2W/S2W
Added Intelliplug V5
Updated Intelliplug
Added Simple GPU Algorithm By Faux123
[B]V1.1[/B]
Added USB Fast Charge V2
Fixed USB Fast Charge
Fixed GCC 5 Compilation
Built with Uber 5.2
[B]V1.2[/B]
Added MarshMallow Support
[B]V1.3[/B]
New Governors:
OndemandPlus
Nightmare
Impulse
SmartMax
Optimax
New IO Schedulers:
Sio
SioPlus
TripNDroid
Vr
Zen
Ect...
[B]V1.4[/B]
Tweaked Some Governors & Schedulers
Reworked Gesture Wake
Added & Updated Power Suspend Driver
Lmk Now Makes Proper NULL Checks
Force SELinux Permissive
[B]V1.5[/B]
Build With UBER-5.3
simple_gpu_algorithm: prevent overflow pwrlevel
Reduce Disk Writes
Add Alucard Hotplug
Update Alucard Hotpplug
Reclaimed RAM from Loggers
Add XPerience Governor
Updated And Tweaked XPerience Governor
Underclock CPU to 96mhz
Add Dynamic FSync
Download
Credits:
Me
Rainforce279
Everyone Who Made Cm 12.1/cm13 Kernel
Some other people
Source:
GitHub
Good, keep it up
Sent from my Moto E using Tapatalk
good to see another kernel.... gr8
V1.1 Released Download on OP
Added USB Fast Charge V2
Fixed USB Fast Charge
Fixed GCC 5 Compilation
Built with Uber 5.2
V1.2 Released Download on OP
Added MarshMallow Support
V1.3 Release download on OP
New Governors:
OndemandPlus
Nightmare
Impulse
SmartMax
Optimax
New IO Schedulers:
Sio
SioPlus
TripNDroid
Vr
Zen
Ect...
I can not download from this site. Always back to the same page.
V1.4 Released Download on Op
Tweaked Some Governors & Schedulers
Reworked Gesture Wake
Added & Updated Power Suspend Driver
Lmk Now Makes Proper NULL Checks
Force SELinux Permissive
Sent from my LT30p using Tapatalk
Awesome
Sent from my Moto E using Tapatalk
leomalaj10 said:
I can not download from this site. Always back to the same page.
Click to expand...
Click to collapse
New version uploaded to Google Drive
how to enable dt2w? I can't find the option in Kernel Adiutor.
I'm using it on slimlp rom
Sent from my Moto E using XDA Free mobile app
---------- Post added at 04:55 PM ---------- Previous post was at 04:30 PM ----------
it was my fault, cleaning kernel Adiutor data resolved the issue.
I'm testing it now and it feels great.
thank you for this great kernel
Sent from my Moto E using XDA Free mobile app
V1.5 Released Download on Op
Build With UBER-5.3
simple_gpu_algorithm: prevent overflow pwrlevel
Reduce Disk Writes
Add Alucard Hotplug
Update Alucard Hotpplug
Reclaimed RAM from Loggers
Add XPerience Governor
Updated And Tweaked XPerience Governor
Underclock CPU to 96mhz
Add Dynamic FSync
Sent from my LT30p using Tapatalk
Dark98 said:
V1.5 Released Download on Op
Build With UBER-5.3
simple_gpu_algorithm: prevent overflow pwrlevel
Reduce Disk Writes
Add Alucard Hotplug
Update Alucard Hotpplug
Reclaimed RAM from Loggers
Add XPerience Governor
Updated And Tweaked XPerience Governor
Underclock CPU to 96mhz
Add Dynamic FSync
Sent from my LT30p using Tapatalk
Click to expand...
Click to collapse
Nice update!!!
Everything is working nice!
Haven't experienced any screen freeze yet
Will flash this today.
Remove alucard i think it is not stable msm hotplug is better.
ashuy93 said:
Nice update!!!
Everything is working nice!
Haven't experienced any screen freeze yet
Click to expand...
Click to collapse
thanks for the feedback and testing
piku 123 said:
Will flash this today.
Remove alucard i think it is not stable msm hotplug is better.
Click to expand...
Click to collapse
Just don't enable it, use Intelliplug instead, or even disable both if you prefer
What's the Best settings for getting great battery backup + performance?
Shaikh Arbaaz said:
What's the Best settings for getting great battery backup + performance?
Click to expand...
Click to collapse
Alucard + XPerience is very good, my phone doesn't lag and I get fairly good battery life
Dark98 said:
Alucard + XPerience is very good, my phone doesn't lag and I get fairly good battery life
Click to expand...
Click to collapse
I'll try but a very quick reply thanks
Shaikh Arbaaz said:
What's the Best settings for getting great battery backup + performance?
Click to expand...
Click to collapse
Will be posting a guide for setting up this kernel for awesome battery life and snappy performance
Shaikh Arbaaz said:
I'll try but a very quick reply thanks
Click to expand...
Click to collapse
How did it go?
piku 123 said:
Will be posting a guide for setting up this kernel for awesome battery life and snappy performance
Click to expand...
Click to collapse
Thanks this kernel needs all the help it can get
Sent from my LT30p using Tapatalk
No fancy descriptions here. It's a kernel, it's for the axon 7 (US), and it works.
Features (from what I can remember)
KCAL display driver
Added fiops, zen, row, and sio IO schedulers
Enabled westwood, htcp, hstcp, hybla, vegas, scalable, lp, veno, illinois, and dctcp tcp congestion algorithms
Slight overclock to LITTLE cluster (1.72GHz) and big cluster (2.26ghz)
GPU overclock (652MHz)
Performance tweaks
Tweaked out ramdisk
F2FS support
init.d support
Adrenoboost
Touch input boost
Wake lock controls for various things >_>
Fsync on/off support
exFAT (nofuse) support
Enabled core ctl in kernel hotplugging
Enabled qhmp scheduler
enabled HMP cstate aware (is aware of core c-states and tries to schedule tasks on already awake cpus)
Added cleancache and frontswap
Disabled arm "CoreSight"
Enabled zram lz4 compression
Disabled dm_verity kernel wide.
Disabled input debugging driver
Disabled msm remote debugging support
Enabled in-kernel block test/test io scheduler
Disabled ZTE "VLog" and "sdlog"
Disabled cache and m4m error reporting
Disabled panic on correctable cache/m4m errors
Disabled compiling with frame pointers for debugging
much more..
Thanks:
flar2
jcadduono
imoseyon
faux123
dorimanx
savoca
all of team win
all of xda-developers staff
all of xda-developers community (for those i've missed)
of course ZTE for this fantastic device
Google for awesome af Android
________________________________________________________________________________________________
[size=+3]LineageOS[/size]
Download (Enforcing version): BeastMode vR88 for the ZTE Axon 7 (A2017U) now with war_mod
Download (Permisive version): BeastMode vR105 for the ZTE Axon 7 (A2017U) now with war_mod
XDA:DevDB Information
BeastMode Kernel for the Axon 7 (a2017u), Kernel for the ZTE Axon 7
Contributors
freeza, freeza, warBeard_actual
Source Code: http://www.freeza-inc.com/kernelsources/A2017U/N/Stock/Kernel.tar.gz
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: vR105
Stable Release Date: 2017-12-19
Created 2016-12-23
Last Updated 2017-12-20
Changelog
12/19/17-vR105:
Updated almost everything to B32 source
Updated war_mod
Added warmode sysfs entry (/sys/kernel/warmod/warmode) with 0 (disabled) as default. configurable in init.d script
Added android security patches from August-December via the Android Security Bulletin
Ramdisk updated with latest LineageOS version
11/18/17-vR88:
Reborn based on B32/B25 hybrid
Full changelog later
4/18/17-vR45:
Fixes
Resurrection Remix support
4/17/17-vR44:
Disabled overclocking. Didn't provide much benefit and our SoC kind of sucks for OC stability (lower binned probably.)
Tweaks
4/15/17-vR43:
Made little cores behave by forcing them to 1.5GHz by default.
Disabled cstate awareness
4/12/17-vR42:
Removed a bunch of modules and compiled some drivers into kernel
LineageOS support
4/9/17-vR40:
Disabled some debug options in defconfig
Enabled qhmp
F2FS support
4/3/17-vR34:
Core Control is disabled by default (can be re-enabled from /sys/devices/system/cpu/cpu0/core_ctl/disable)
Added a few more wakelock controls (/sys/module/wakeup/parameters/)
3/22/17-vR31:
Added a few more wakelock controls (Thanks @flar2)
Misc fixes
3/21/17-vR30:
Updated to B19 source from ZTE.
3/19/17-vR29:
Fixed NFC until ZTE's B19 source. (Thanks @jimbo77)
3/17/17-vR28:
Updated source a little
Fixed Magisk/NoSuperSU quirks with sim.
3/12/17-vR27:
-Fixed the damn WiFi
-Added magisk compatible NO SuperSU version
2/24/17-vR26:
-Fixed WiFi on permissive
-Updated wlan driver
-Added Zen IO scheduler
2/21/17-vR24:
-Fixed ADB/MTP. ADB shell should launch as root, at least on the permissive version.
-Disabled a bunch of debugging overhead
2/19/17-vR23 (Enforcing only):
-Fixed WiFi
2/17/17-vR22:
-Updated for B15 (7.0/Nougat)
1/30/17-vR15: performance tweaks
-ZTE Nougat F2FS driver
[email protected] f2fs patches
-ZTE Nougat WiFi driver
12/28/16-vR12: attempt #2 at fixing video recording/playback
-more defconfig tweaks
-included B27 library files for mediaplayerservice, camera metadata, cameraservice, and arcsoft night mode.
-that safetynet patch for unlocked bootloader.
12/28/16-vR09: fixed video playback.
-switched wlan driver to CM13 version(R.I.P)
-tweaks to defconfig
12/23/16-vR07: initial release
Lmao
Sent from my Nexus 6P using Tapatalk
Nice
Running on the latest B29, all cool. This device is a behemoth overclocked! Thanks!
Do we have the stock kernel. Just in case we want to rollback?
borijess said:
Do we have the stock kernel. Just in case we want to rollback?
Click to expand...
Click to collapse
Backup the boot partition with TWRP then you can restore it if you want to roll back.
Hey
(i know its for the A2017U)
i am on A2017G , it boots but no audio, maybe i could port your source to A2017G. but the sourcecode link want work.
Thx For your Work.....
VeNuMuS said:
Lmao
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Why??
Thanks for this! Been waiting for a better kernel.
Questions:
- Does it make double-tap-to-wake faster?
- Does it solve the delayed notifications problem?
- Will it bring about world peace?
dank
Bad and Boujee. Nice.
Other than selecting the max overclock values, do you have any recommended kernel settings to get the best from the phone & kernel? Thanks
I'm going to guess it doesn't work with cm13?
It'd be pretty cool if it did, but I wouldn't be surprised if it didn't.
Im on A2017G and for me Sound work.But Gpu not OC for me it show 624 MHz not 652MHz.Can we change it via Kernel Auditor??
whats the best saturation number in KCAL? also when its flashed does it OC or its left stock speed?
gecko702 said:
whats the best saturation number in KCAL? also when its flashed does it OC or its left stock speed?
Click to expand...
Click to collapse
It's left at its stock values. You'll need to specify the overclock, the step is enabled but not selected by default. I use Kernel Auditor with SuperSU and BusyBox to modify the settings, and so far it's worked just fine.
TheLastSidekick said:
It's left at its stock values. You'll need to specify the overclock, the step is enabled but not selected by default. I use Kernel Auditor with SuperSU and BusyBox to modify the settings, and so far it's worked just fine.
Click to expand...
Click to collapse
What's the safest OC speed without sacrificing too much battery or phone.
---------- Post added at 01:16 PM ---------- Previous post was at 01:14 PM ----------
Is it just me or is the camera faster at taking pics on this kernel?
Is it working on cm13 and can you make a Version without overclocking?
How about undervolt? Can i use an app for this?
dbekan%5 said:
Is it working on cm13 and can you make a Version without overclocking?
How about undervolt? Can i use an app for this?
Click to expand...
Click to collapse
Why would you need a version without overclocking when overclocking isn't enabled by default?
Custom Kernel for S7 and S7 Edge to be used with AOSP roms (Lineage OS, Havoc OS, any other 8.1 or 9.0 rom)
FEATURES
AMOLED PWM Flicker-Free fix (selectable via MTweaks)
WireGuard Support
Added Boeffla Wavelock Blocker
Added Extra Configurable Wavelocks
Added CPU Governors
Added CPU Voltage and Frequency Control
Added Dynamic Fsync
Added Frandom Support
Added GPU Voltage and Frequency Control
Added IO Schedulers
Added Insecure ADB
Added Powersuspend
Added UKSM
Disabled KNOX
Enabled 4 Cores can reach highest CPU frequency
Enabled IP_NF_TARGET_TTL
Enabled LZ4 support
Increase Battery Charging Levels (USB Standard = 900, USB Accesory charger = 900, MHL USB =660)
Software toggle for CRC via MTweaks app
Audio Gain control via MTweaks app
AMOLED PWM FLICKER-FREE INFO: XDA Thread
WIREGUARD INFO: XDA THREAD
list of included CPU Governors
alucard - barry_allen - bioshock - blu_active - cafactive - conservative - cultivation - dancedance - darkness - electrodemand - elementalx - HYPER -
impulse - intelliactive - intellidemand - intellimm - interactive - ironactive - lionheart - nightmare - ondemand - ondemandplus - ondemand_x -
pegasusq - performance - powersave - relaxed - smartass2 - smartmax - smartmax_eps - userspace - wheatley - yankactive - zzmoove
list of included IO Schedulers
bfq -fifo - fiops - row - sio - sioplus - tripndroid - vr - zen - maple
VARIANTS SUPPORTED
G930F
G930FD
G930K
G930L
G930S
G930W8
G935F
G935FD
G935K
G935L
G935S
G935W8
KERNEL INFORMATION
Built with: Google GCC 4.9 Toolchain
Linux Version: 3.18.137
DOWNLOADS
FLAT
EDGE
CREDITS + THANKS
Samsung Open Source Release Center for the Samsung Source code
Linux Kernel Archives for the Linux Source code
Tkkg1994 for all his help and numerous code samples from his source
osm0sis for Android Image Kitchen and AnyKernel2
jesec for Fingerprint Fix
arter97 for various fixes
lyapota for some Governors and Schedulers
farovitus for his help with mods and commits
morogoku for MTweaks, lots of help, and commits
Noxxxious for his help with mods and commits
Ivan_Meler for porting kernel to AOSP
XDA:DevDB Information
Reflux Kernel, Kernel for the Samsung Galaxy S7 Edge
Contributors
gibranm
Source Code: https://github.com/gibranmather/Reflux
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R13
Stable Release Date: 2019-03-29
Created 2018-09-01
Last Updated 2019-03-29
you have no idea how long I've waited for something like this :laugh::good::fingers-crossed:
[deleted]
0xE2 said:
For some reason the added frequencies for the CPU don't show up in MTweaks for me
Click to expand...
Click to collapse
Same, also the battery drains quite a bit quicker than stock
[deleted]
0xE2 said:
Not for me, also a kernel won't have that much of an impact on battery life. There must be something else going on.
Click to expand...
Click to collapse
What frequencies are missing?
Here's a screenshot from my mtweaks.
Ah my bad these featured haven't compiled properly. Will be there in next build
sambow23 said:
Same, also the battery drains quite a bit quicker than stock
Click to expand...
Click to collapse
When flashing kernel, do a wipe of cache and dalvik.
And only use on aosp 8.1 roms
gibranm said:
When flashing kernel, do a wipe of cache and dalvik.
And only use on aosp 8.1 roms
Click to expand...
Click to collapse
After clearing the Dalvik/cache, my device is constantly warm. I've set low frequencies on the big and little cores with the interactive governor.
Using RR 6.1.0 if that helps
sambow23 said:
After clearing the Dalvik/cache, my device is constantly warm. I've set low frequencies on the big and little cores with the interactive governor.
Using RR 6.1.0 if that helps
Click to expand...
Click to collapse
Which rr 6.1 build?
New Build [R2]
Changelog:
Added Cafactive CPU Governor
Added Cultivation CPU Governor
Added ElementalX CPU Governor
Added Wheatley CPU Governor
Added UKSM (Ultra Kernel Samepage Merging )
FLAT
EDGE
gibranm said:
Changelog:
Added Cafactive CPU Governor
Added Cultivation CPU Governor
Added ElementalX CPU Governor
Added Wheatley CPU Governor
Added UKSM (Ultra Kernel Samepage Merging )
FLAT
EDGE
Click to expand...
Click to collapse
Would be nice if you can add the "Most up to date guide on CPU governors, I/O schedulers" thread's link in your OP. Just in case the users start asking, which is the best gov, schedule, best combo, blah, blah, blah. The usual in a kernel thread, you know. Thanks once more for the kernel. Time to try the new R2.
gibranm said:
Which rr 6.1 build?
Click to expand...
Click to collapse
RR-O-v6.1.0-20180824-hero2lte
sambow23 said:
RR-O-v6.1.0-20180824-hero2lte
Click to expand...
Click to collapse
Hmmmmmmm try flashing the new build. Wipe cache and dalvik and then flash kernel. To be safe uninstall magisk or root before flashing kernel
mauam said:
Would be nice if you can add the "Most up to date guide on CPU governors, I/O schedulers" thread's link in your OP. Just in case the users start asking, which is the best gov, schedule, best combo, blah, blah, blah. The usual in a kernel thread, you know. Thanks once more for the kernel. Time to try the new R2.
Click to expand...
Click to collapse
Thanks. That's a good idea. I'll add it later
[deleted]
0xE2 said:
I hope you'll address the frequency issues in R3, because otherwise I can't complain
Click to expand...
Click to collapse
What issue?
for future builds can u plz add an option to increase sound using kernel auditor ....(if possible)... this is the only reason i cant really stay on aosp roms the volume is really low
Tarique435 said:
for future builds can u plz add an option to increase sound using kernel auditor ....(if possible)... this is the only reason i cant really stay on aosp roms the volume is really low
Click to expand...
Click to collapse
For now you can use sound mods to achieve that. I am looking into adjusting headphone gain
[deleted]