Custom Kernel for S7 and S7 Edge to be used with AOSP roms (Lineage OS, Havoc OS, any other 8.1 or 9.0 rom)
FEATURES
AMOLED PWM Flicker-Free fix (selectable via MTweaks)
WireGuard Support
Added Boeffla Wavelock Blocker
Added Extra Configurable Wavelocks
Added CPU Governors
Added CPU Voltage and Frequency Control
Added Dynamic Fsync
Added Frandom Support
Added GPU Voltage and Frequency Control
Added IO Schedulers
Added Insecure ADB
Added Powersuspend
Added UKSM
Disabled KNOX
Enabled 4 Cores can reach highest CPU frequency
Enabled IP_NF_TARGET_TTL
Enabled LZ4 support
Increase Battery Charging Levels (USB Standard = 900, USB Accesory charger = 900, MHL USB =660)
Software toggle for CRC via MTweaks app
Audio Gain control via MTweaks app
AMOLED PWM FLICKER-FREE INFO: XDA Thread
WIREGUARD INFO: XDA THREAD
list of included CPU Governors
alucard - barry_allen - bioshock - blu_active - cafactive - conservative - cultivation - dancedance - darkness - electrodemand - elementalx - HYPER -
impulse - intelliactive - intellidemand - intellimm - interactive - ironactive - lionheart - nightmare - ondemand - ondemandplus - ondemand_x -
pegasusq - performance - powersave - relaxed - smartass2 - smartmax - smartmax_eps - userspace - wheatley - yankactive - zzmoove
list of included IO Schedulers
bfq -fifo - fiops - row - sio - sioplus - tripndroid - vr - zen - maple
VARIANTS SUPPORTED
G930F
G930FD
G930K
G930L
G930S
G930W8
G935F
G935FD
G935K
G935L
G935S
G935W8
KERNEL INFORMATION
Built with: Google GCC 4.9 Toolchain
Linux Version: 3.18.137
DOWNLOADS
FLAT
EDGE
CREDITS + THANKS
Samsung Open Source Release Center for the Samsung Source code
Linux Kernel Archives for the Linux Source code
Tkkg1994 for all his help and numerous code samples from his source
osm0sis for Android Image Kitchen and AnyKernel2
jesec for Fingerprint Fix
arter97 for various fixes
lyapota for some Governors and Schedulers
farovitus for his help with mods and commits
morogoku for MTweaks, lots of help, and commits
Noxxxious for his help with mods and commits
Ivan_Meler for porting kernel to AOSP
XDA:DevDB Information
Reflux Kernel, Kernel for the Samsung Galaxy S7 Edge
Contributors
gibranm
Source Code: https://github.com/gibranmather/Reflux
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R13
Stable Release Date: 2019-03-29
Created 2018-09-01
Last Updated 2019-03-29
you have no idea how long I've waited for something like this :laugh::good::fingers-crossed:
[deleted]
0xE2 said:
For some reason the added frequencies for the CPU don't show up in MTweaks for me
Click to expand...
Click to collapse
Same, also the battery drains quite a bit quicker than stock
[deleted]
0xE2 said:
Not for me, also a kernel won't have that much of an impact on battery life. There must be something else going on.
Click to expand...
Click to collapse
What frequencies are missing?
Here's a screenshot from my mtweaks.
Ah my bad these featured haven't compiled properly. Will be there in next build
sambow23 said:
Same, also the battery drains quite a bit quicker than stock
Click to expand...
Click to collapse
When flashing kernel, do a wipe of cache and dalvik.
And only use on aosp 8.1 roms
gibranm said:
When flashing kernel, do a wipe of cache and dalvik.
And only use on aosp 8.1 roms
Click to expand...
Click to collapse
After clearing the Dalvik/cache, my device is constantly warm. I've set low frequencies on the big and little cores with the interactive governor.
Using RR 6.1.0 if that helps
sambow23 said:
After clearing the Dalvik/cache, my device is constantly warm. I've set low frequencies on the big and little cores with the interactive governor.
Using RR 6.1.0 if that helps
Click to expand...
Click to collapse
Which rr 6.1 build?
New Build [R2]
Changelog:
Added Cafactive CPU Governor
Added Cultivation CPU Governor
Added ElementalX CPU Governor
Added Wheatley CPU Governor
Added UKSM (Ultra Kernel Samepage Merging )
FLAT
EDGE
gibranm said:
Changelog:
Added Cafactive CPU Governor
Added Cultivation CPU Governor
Added ElementalX CPU Governor
Added Wheatley CPU Governor
Added UKSM (Ultra Kernel Samepage Merging )
FLAT
EDGE
Click to expand...
Click to collapse
Would be nice if you can add the "Most up to date guide on CPU governors, I/O schedulers" thread's link in your OP. Just in case the users start asking, which is the best gov, schedule, best combo, blah, blah, blah. The usual in a kernel thread, you know. Thanks once more for the kernel. Time to try the new R2.
gibranm said:
Which rr 6.1 build?
Click to expand...
Click to collapse
RR-O-v6.1.0-20180824-hero2lte
sambow23 said:
RR-O-v6.1.0-20180824-hero2lte
Click to expand...
Click to collapse
Hmmmmmmm try flashing the new build. Wipe cache and dalvik and then flash kernel. To be safe uninstall magisk or root before flashing kernel
mauam said:
Would be nice if you can add the "Most up to date guide on CPU governors, I/O schedulers" thread's link in your OP. Just in case the users start asking, which is the best gov, schedule, best combo, blah, blah, blah. The usual in a kernel thread, you know. Thanks once more for the kernel. Time to try the new R2.
Click to expand...
Click to collapse
Thanks. That's a good idea. I'll add it later
[deleted]
0xE2 said:
I hope you'll address the frequency issues in R3, because otherwise I can't complain
Click to expand...
Click to collapse
What issue?
for future builds can u plz add an option to increase sound using kernel auditor ....(if possible)... this is the only reason i cant really stay on aosp roms the volume is really low
Tarique435 said:
for future builds can u plz add an option to increase sound using kernel auditor ....(if possible)... this is the only reason i cant really stay on aosp roms the volume is really low
Click to expand...
Click to collapse
For now you can use sound mods to achieve that. I am looking into adjusting headphone gain
[deleted]
Related
YaYPrime is based on the oficial 3.4.0 mr1.1 kernel from google, with the commits needed to run in android 6.0.
With Android M, all the kernes have merge the commits to be compatible with it, so in my case, I prefer to start a new one from 0, making the phone feel smooth while having a good battery life.
Features:
- Based on official 3.4.0 mr1.1 mako kernel
- Compiled using the lastest version of uber 5.3.1, optimized for cortex-a15
- Anykernel2
- Mako_hotplug as hotplug
- FranciscoFranco's thermal
- FranciscoFranco's gamma control
- Frequency limitator on screen-off (1026mhz by default)
- Voltage control
- Cpu Overclock of 1.7ghz (1.5ghz by default)
- Cpu Underclock of 192mhz (384mhz by default)
- Gpu Overlock of 480mhz (400mhz by default)
- Ondemand, simple and performance as gpu governors
- Ondemand, performance, conservative and interactive as cpu governors
- Deadline, zen, fiops, cfq, bfq, row as i/o schedulers
- Stratosk's Ondemand governor version (by (default)
- Franco's Convervative governor version
- Taurus' Interactive governor version
- Faux's Sound Control
- Readhead set in 512kb by default
- Graphite and neon optimizations
- UsbOtg support
- Kexec (multirom)
- DT2W support
- Fastcharge support
- F2FS support
- A lot of improvements and optimizations
Downloads:
AOSP: https://www.androidfilehost.com/?w=files&flid=42219
CM: https://www.androidfilehost.com/?w=files&flid=47776
Installation:
If you come from another kernel:
- Reboot in recovery mode
- Dirty-flash the rom you are using (without wipes)
- Flash kernel
If you come from a previous version:
- Reboot in recovery mode
- Flash kernel
(If you find something weird, wipe dalvik/cache)
To configure the kernel I recommend using kernel auditor.
Thanks: @hellsgod (kernel base), Google, Uber, @txuki2005, @serbalabari, @mrraine, @CallMeAldy, @zaclimon, @Flashhhh, @hurtsky, @franciscofranco, @faux123, @stratosk, @neobuddy89, @dorimanx, @osm0sis (anykernel2), and all the people that contribute with their commits.
Finally, I'm not responsible for any damage that can happen to your phones, I use the kernel as a daily one and I don't have any problem.
XDA:DevDB Information
YaYPrime-M Kernel, a kernel for the Google Nexus 4
Contributors
yaymalaga
Source Code: https://github.com/yaymalaga/yayPrime_kernel
Version Information
Status: Stable
Created 2015-10-25
Last Updated 2016-01-15
Changelog:
R3
- Re-done from R1
- Fixes everywhere, no more lags on chrome
- Build using latest Uber 5.3.1 (optimized for cortex-a15 - compiled by me)
- Merged all patches from 6.0.1 and the latest ones from 3.4 branch
- Added cpu underclock to 192mhz (325mhz by default)
- Updated interactive governor (ondemand by default)
- F2FS support (Need to be tested)
- Core optimizations (mutex, futex, sched, etc)
- Selinux improvements for smoothness
- Cfq i/o scheduler optimized (the other ones are removed until next release)
- Added missing Faux soundcontrol commits
- Cpu management improvements
- DT2W and T2W
- CM version added
Old releases:
R2:
- Compiled using lastest uber 4.9 (compiled by me, optimized for cortex-a15)
- Graphite and neon enabled
- Makefile and flags optimizations
- Compiler and cortex-a15 optimizations
- A lot of optimizations in the I/O, and new schedulers:
Row added and tuned up
Deadline updated and tuned up
Cfq updated and tuned up
Bfq (v7-r8) added and tuned up
Zen added and tuned up
Fiops added and tuned up
- Kexec support
- DT2W support (from Stratosk)
- Fastcharge support
- OTG support (theoretically)
- Interactive governor fixes (now uses lower freq)
- Fixes and optimizations for camera, gpu, etc
- Some improvements in general
R1:
- Initial version
Any plans to add different governors like zzmome, scary, SmartassV2, SmartMax, etc?
---------- Post added at 08:28 PM ---------- Previous post was at 08:28 PM ----------
Also, thanks for the new kernel!
thatkindaguy said:
Any plans to add different governors like zzmome, scary, SmartassV2, SmartMax, etc?
---------- Post added at 08:28 PM ---------- Previous post was at 08:28 PM ----------
Also, thanks for the new kernel!
Click to expand...
Click to collapse
Just try "hellsactive" and see for yourself what smoothness really looks like.
dragos281993 said:
Just try "hellsactive" and see for yourself what smoothness really looks like.
Click to expand...
Click to collapse
Not looking for smoothness - Looking for a good battery and performance balance. The best Governor I've found for that is zzmove with ybat as the profile number, and not a single kernel for mako includes zzmove
Nice kernel man been running for 24 hours now using hellsactive profile working very well.
Tapped from my marshmako
Looking impressive. Working gr8 till now.. Keep up the good work.
thatkindaguy said:
Any plans to add different governors like zzmome, scary, SmartassV2, SmartMax, etc?
---------- Post added at 08:28 PM ---------- Previous post was at 08:28 PM ----------
Also, thanks for the new kernel!
Click to expand...
Click to collapse
Maybe I will include smartmax from ak kernel in the next release
@yaymalaga is it safe to flash directly coming from hellscore b85? For some reason I can only dirty flash if I wipe system also and flash rom + Gapps.
Sent from my Nexus 4 using Tapatalk
Is it just me or unknown is the one really shown on the kernel version on about phone?
Sent from my Nexus 4 using XDA Free mobile app
russells.android said:
Is it just me or unknown is the one really shown on the kernel version on about phone?
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
I was ready to ask same think.
Also, for me, settings in 'init.yayprime' does not alter kernel's settings
What rom are you using?
About the unknown name, my bad. I'm looking for what causes the name not to be shown
Cataclysm MM (Nexus 4)
Not a bad kernel,but problem that I have is after some time, videos just stop playing, have to reboot my phone to make them work,didn't happen on stock kernel, using franks 6.0 latest build
Performance is solid with this kernel for me. Nice kernel!
Can we have halfbreed color as default in the next build? The washed out colors are burning my eyes lol
veeholics said:
Performance is solid with this kernel for me. Nice kernel!
Can we have halfbreed color as default in the next build? The washed out colors are burning my eyes lol
Click to expand...
Click to collapse
Use Synapse or Kernel Auditor or any other kernel tweakers, you can change the colors from the app.
This kernel has USB otg support or not? I've installed synapse and kernel adiutor and didn't found any way to enable USB otg.
I'm using it with pure ROM.
Sent from my Nexus 4 using Tapatalk
sidnoit22 said:
Use Synapse or Kernel Auditor or any other kernel tweakers, you can change the colors from the app.
Click to expand...
Click to collapse
I know that. What I actually meant is the gamma colors that is included within the kernel. That way, it will apply all accross the phone.
If you just change it with an app, it will not apply to recovery and all other things before booting android. That's quite a big deal for me.
jolas said:
Cataclysm MM (Nexus 4)
Click to expand...
Click to collapse
Well I haven't tested by myself in this rom, but maybe it is using cm performance profile which change the governor configs
g33k0 b3lk0w said:
Not a bad kernel,but problem that I have is after some time, videos just stop playing, have to reboot my phone to make them work,didn't happen on stock kernel, using franks 6.0 latest build
Click to expand...
Click to collapse
I have had the same problem using other kernels, so I think that it's not the kernel fault
mandgeo said:
This kernel has USB otg support or not? I've installed synapse and kernel adiutor and didn't found any way to enable USB otg.
I'm using it with pure ROM.
I think that it does not (we are basing on hellscore kernel right now), but in the near future I will enable it when M kernels manage to adapt it.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
veeholics said:
I know that. What I actually meant is the gamma colors that is included within the kernel. That way, it will apply all accross the phone.
If you just change it with an app, it will not apply to recovery and all other things before booting android. That's quite a big deal for me.
Click to expand...
Click to collapse
Sorry, but we are using the google's default gamma, so it will be the default one
Btw, I pretty busy with real life and studies, but I'm looking to change to another base with even more optimizations, when I have time I will do some tests
yaymalaga said:
YaYPrime-M is based in hellsgod's kernel, as it is the perfect base to continue with, so if you like hellscore, then you will love this new kernel.
Click to expand...
Click to collapse
can you/anyone mirror it? AFH currently has server problems
Kang-KernelFor Lollipop & Marshmallow
Kang-Kernel is a kernel based off of all the other kernels for moto e, it has commits from multiple kernels for more features/performance.
Features:
Built With UBERTC-5.3
IntelliplugV5 & Alucard Hotplugs
CPU Underclock
Many Governors
Many Schedulers
Power Suspend Driver
Dynamic FSync
DT2W/S2W
USB Fast Charge
AOSP/CM Support
Lollipop & Marshmallow support
Ect
Changelog:
Code:
[B]V1[/B]
Bring Back LCD-Notifier
Added DT2W/S2W
Updated DT2W/S2W
Added Intelliplug V5
Updated Intelliplug
Added Simple GPU Algorithm By Faux123
[B]V1.1[/B]
Added USB Fast Charge V2
Fixed USB Fast Charge
Fixed GCC 5 Compilation
Built with Uber 5.2
[B]V1.2[/B]
Added MarshMallow Support
[B]V1.3[/B]
New Governors:
OndemandPlus
Nightmare
Impulse
SmartMax
Optimax
New IO Schedulers:
Sio
SioPlus
TripNDroid
Vr
Zen
Ect...
[B]V1.4[/B]
Tweaked Some Governors & Schedulers
Reworked Gesture Wake
Added & Updated Power Suspend Driver
Lmk Now Makes Proper NULL Checks
Force SELinux Permissive
[B]V1.5[/B]
Build With UBER-5.3
simple_gpu_algorithm: prevent overflow pwrlevel
Reduce Disk Writes
Add Alucard Hotplug
Update Alucard Hotpplug
Reclaimed RAM from Loggers
Add XPerience Governor
Updated And Tweaked XPerience Governor
Underclock CPU to 96mhz
Add Dynamic FSync
Download
Credits:
Me
Rainforce279
Everyone Who Made Cm 12.1/cm13 Kernel
Some other people
Source:
GitHub
Good, keep it up
Sent from my Moto E using Tapatalk
good to see another kernel.... gr8
V1.1 Released Download on OP
Added USB Fast Charge V2
Fixed USB Fast Charge
Fixed GCC 5 Compilation
Built with Uber 5.2
V1.2 Released Download on OP
Added MarshMallow Support
V1.3 Release download on OP
New Governors:
OndemandPlus
Nightmare
Impulse
SmartMax
Optimax
New IO Schedulers:
Sio
SioPlus
TripNDroid
Vr
Zen
Ect...
I can not download from this site. Always back to the same page.
V1.4 Released Download on Op
Tweaked Some Governors & Schedulers
Reworked Gesture Wake
Added & Updated Power Suspend Driver
Lmk Now Makes Proper NULL Checks
Force SELinux Permissive
Sent from my LT30p using Tapatalk
Awesome
Sent from my Moto E using Tapatalk
leomalaj10 said:
I can not download from this site. Always back to the same page.
Click to expand...
Click to collapse
New version uploaded to Google Drive
how to enable dt2w? I can't find the option in Kernel Adiutor.
I'm using it on slimlp rom
Sent from my Moto E using XDA Free mobile app
---------- Post added at 04:55 PM ---------- Previous post was at 04:30 PM ----------
it was my fault, cleaning kernel Adiutor data resolved the issue.
I'm testing it now and it feels great.
thank you for this great kernel
Sent from my Moto E using XDA Free mobile app
V1.5 Released Download on Op
Build With UBER-5.3
simple_gpu_algorithm: prevent overflow pwrlevel
Reduce Disk Writes
Add Alucard Hotplug
Update Alucard Hotpplug
Reclaimed RAM from Loggers
Add XPerience Governor
Updated And Tweaked XPerience Governor
Underclock CPU to 96mhz
Add Dynamic FSync
Sent from my LT30p using Tapatalk
Dark98 said:
V1.5 Released Download on Op
Build With UBER-5.3
simple_gpu_algorithm: prevent overflow pwrlevel
Reduce Disk Writes
Add Alucard Hotplug
Update Alucard Hotpplug
Reclaimed RAM from Loggers
Add XPerience Governor
Updated And Tweaked XPerience Governor
Underclock CPU to 96mhz
Add Dynamic FSync
Sent from my LT30p using Tapatalk
Click to expand...
Click to collapse
Nice update!!!
Everything is working nice!
Haven't experienced any screen freeze yet
Will flash this today.
Remove alucard i think it is not stable msm hotplug is better.
ashuy93 said:
Nice update!!!
Everything is working nice!
Haven't experienced any screen freeze yet
Click to expand...
Click to collapse
thanks for the feedback and testing
piku 123 said:
Will flash this today.
Remove alucard i think it is not stable msm hotplug is better.
Click to expand...
Click to collapse
Just don't enable it, use Intelliplug instead, or even disable both if you prefer
What's the Best settings for getting great battery backup + performance?
Shaikh Arbaaz said:
What's the Best settings for getting great battery backup + performance?
Click to expand...
Click to collapse
Alucard + XPerience is very good, my phone doesn't lag and I get fairly good battery life
Dark98 said:
Alucard + XPerience is very good, my phone doesn't lag and I get fairly good battery life
Click to expand...
Click to collapse
I'll try but a very quick reply thanks
Shaikh Arbaaz said:
What's the Best settings for getting great battery backup + performance?
Click to expand...
Click to collapse
Will be posting a guide for setting up this kernel for awesome battery life and snappy performance
Shaikh Arbaaz said:
I'll try but a very quick reply thanks
Click to expand...
Click to collapse
How did it go?
piku 123 said:
Will be posting a guide for setting up this kernel for awesome battery life and snappy performance
Click to expand...
Click to collapse
Thanks this kernel needs all the help it can get
Sent from my LT30p using Tapatalk
Code:
/*
*
* I not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns do some research
* YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device, i will laugh at you.
*
*/
Kernel Features:
-GOVERNORS
ADAPTIVE
BIOSHOCK
CONSERVATIVEX
INTERACTIVE
LAGFREE
LIONHEART
ONDEMAND
PERFORMANCE
POWERSAVE
BARRY ALLEN
USERSPACE
WHEATLEY
ALUCARD
INTERACTIVEX
FRANKENSTEIN
DYNAMIC INTERACTIVE
HOTPLUG
SMARTMAX
LULZACTIVE
DARKNESS
IMPULSE
CYAN
BLUACTIVE
NIGHTMARE
LAZY
PEGASUSQ
INTELLIACTIVE
SMARTASSH3
YANKACTIVE
THESSJACTIVE
SMARTASS2
HOTPLUG
HYBRID
INTEL
HOTPLUGS
AUTOSMP
ALUCARD
INTELLIPLUG
MAKO HOTPLUG
MSM HOTPLUG
ZEN DECISION
-SCHDULERS
NOOP
BFQ
SIO
DEADLINE
CFQ
SIOPLUS
ROW
FIOPS
FIFO
ZEN
VR
TRIPNDROID
-TCP CONG.
BIC
CUBIC
WESTWOOD
HTCP
HSTCP
HYBLA
VEGAS
SCALABLE
LP
VENO
YEAH
ILLINOIS
-OC
-UC
-KSM optimized
-CPU Optimizations
-Built with custom GCC 5.3.1 toolchain
-ZRAM support
-Some Tweaks
Kernel Link
https://www.androidfilehost.com/?w=files&flid=57205
OLD builds
https://www.androidfilehost.com/?w=files&flid=62867
XDA:DevDB Information
OctoDex, Kernel for the Asus ZenFone 2
Contributors
Nyks45, say99
Source Code: https://github.com/Nyks45/OctoDex-Kernel
Kernel Special Features: ME
Version Information
Status: Stable
Created 2016-05-09
Last Updated 2016-08-19
Reserved
wrongly created that post dunno how to delete
Change-log V5.0
Kernel Name Changed To OctoDex
Fixed AOSP Issues
Fixed Issues Beacuse Of Linux Ver Updates
Add A New GPU Driver
Add Frankenstein Governor
Add USB Keyboard Mouse Tweak
Disable CRC Check
Add-Tune-Update MSM-Hotplug
Add-Tune AUTOSMP
Tune-Update Intelli-Plug
Add Intelliactive Governor
Add TheSSJActive Governor
Add Yankactive Governor
Add Sio-Plus
Add ROW
Add Barry Allen Governor
Add lulzactive Governor
Add Dynamic Interactive Governor
Add Mako Hotplug
Add Support For Set minimum GPU frequency according to screen state
And Intel Powerclamp For Term.
Add tweaked simpleondemand GPU governor
Add Smartass2 Governor
Update And Modify InteractiveX For Quad Core Devices
Update Interactive
Add Hybrid Governor
Add Hotplug Governor
Implement zen-tune v4
Update smartass2
---------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------
Change-log V4.0
Linux Kernel Version Updated To Latest 3.10.102
AOSP support Added
Init.d support Added
GPU Tweaks
Deep Sleep Tweaks
Some Fixes For Annoying Bugs
Kernel Re-Base
----------------------------------------------------------------------------------------------------------------------------------------------
Change-log V3.5
Re-added Alucard Hotplug
Removed Hotplug Governor
Switched Gcc5.3.1
Kernel Version updated to 3.10.98
Corrections on deep sleep
Fixing some governors
Fixing GPU
New Power Management Controller Thanks To Sayeed
Switch to OFAST
Update intelli-plug
Correct About Phone/Kernel Version
Some Corrections on power efficient workqueues
---------------------------------------------------------------------------------------------------------------------------------------------
Change-log V3.0
Removed Alucard Hotplug
Some Makefile additions and tweaks
Add QuickWakeUp For Fixing Possible Wake Up İssues
Update Kernel Version Up To 3.10.30
More Agressive Power efficient Work queues
Fix GPU Clock Speed(Still Looks Not Changing But İt is Changing i tried
Some GPU Tweaks
Add İntelli-Plug Hotplug
Make İntelli-Plug Hotplug Better
---------------------------------------------------------------------------------------------------------------------------------------------
Change-log V2.5
Power efficient Work queues Added and Fixed
Nightmare governor added
Lazy governor Added
Blueactive Governor added
Pegasusq governor added
Min Brightness can be 0 (From Sayeed's Modded Kernel Auditor)
GPU Tweaks
GPU Frequency issue fixed
Gpu Unlocked NOW
AUTOSMP Hotplug Removed
Zen_Desicion Hotplug added
Possible Fix For wake up
OPTIMAL KVM ADDED
Versions are seperated
-KVM_OC
-KVM_NON_OC
-OC
-NON_OC
---------------------------------------------------------------------------------------------------------------------------------------------
Change-log V2.0
Cyan Governor added
Impulse governor added
Alucard Hotplug added
Dynamic FSync v1.5 added
Powersuspend v1.5 added
Gpu Unlocked
Simpleondemand tweaked gpu governor added
Quick wake up added
Implemented Async Fsync from HTC
Switched 4.9 Toolchain
---------------------------------------------------------------------------------------------------------------------------------------------
Change-log V1.3
Deadline Schduler Added
Tripndroid Schduler added
Battery Life Extender Added
Exfat Support Added
Darkness Governor added
Tcp Algoritms Added
-Westwood
-reno
-bic
-cubic
-highspeed
-htcp
-vegas
-veno
-scalable
-lp
-yeah
-illinois
---------------------------------------------------------------------------------------------------------------------------------------------
If u want features please write
one more
Nice one, xposed is supported ?
:good:
nazagan said:
Nice one, xposed is supported ?
:good:
Click to expand...
Click to collapse
didin't tried but i think yes
Awesome!
I saw that you are going to release an important Beanstalk build
Will this kernel be built in Beanstalk or is it compatible to flash?
gugas123 said:
Awesome!
I saw that you are going to release an important Beanstalk build
Will this kernel be built in Beanstalk or is it compatible to flash?
Click to expand...
Click to collapse
which one is good u think
Nice work
Great.
I will download to test, it is running in ROM Bliss 6.3 ??
Can I install it on AOSP ROM? THANKS
Thanks
Fishcat7 said:
Can I install it on AOSP ROM? THANKS
Click to expand...
Click to collapse
didn't tried
GuilhermeXtreme said:
I will download to test, it is running in ROM Bliss 6.3 ??
Click to expand...
Click to collapse
yes
Another kernel, wow
Great job!
On Temasek rom latest build kernel works fast... no benchmarks yet, looks promising ?
Wysłane z mojego ASUS_Z00A przy użyciu Tapatalka
Automatic rotation is broken on DU.
Would like to see Tripndroid scheduler, battery life extender and network tcp algorithms,implemented if possible ? other than that it's running smooth so far @Nyks45
Sent from my ASUS_Z00A using Tapatalk
nazagan said:
Automatic rotation is broken on DU.
Click to expand...
Click to collapse
Aosp not supported yet
kos4all said:
Would like to see Tripndroid scheduler, battery life extender and network tcp algorithms,implemented if possible other than that it's running smooth so far @Nyks45
Thanks
I will add
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
Nyks45 said:
Aosp not supported yet
Click to expand...
Click to collapse
I'm using the kernel with DU and apart from the rotation everything is incredibly smooth!
Sent from my ASUS_Z00A using Tapatalk
So, here is Airless Kernel for Xperia ZR, compatible with all CM/AOSP based Marshmallow ROMs.
Features:
CPU
- Governors: ondemand, interactive, performance, intellimm, yankactive, yankdemand, impulse, zzmoove, barry_allen
- Multicore Power Saving - tries to group tasks into the least cores possible
- Schedule workqueues on awake CPUs
- CPU Frequency underclock (192 MHz) and overclock (1.7 GHz) capability
- Voltage regulation
Thermal management
- Simplified and efficient thermal driver
- Flexible ramp threshold temperature
GPU
- Governors: simple, ondemand, performance
- 27 MHz idle frequency for ideal power saving
- Overclocked to 487 MHz
Sound
- Faux Sound Control allowing amplified speaker, headphones and microphones volume
Misc
- RGB subtractive color control
- I/O Schedulers: sioplus, bfq, fiops, zen, row, deadline, noop
- Dynamic FSYNC
- Kernel Samepage Merging
- ARM Auto Hotplug (mpdecision replacement) - no tunables
- Gentle Fair Sleepers
- PM: Power Suspend as a replacement to Early Suspend
- TCP congestion protocols: westwood, highspeed, cubic, reno
- Disabling of some well known wakelocks (e.g. msm_hsic_host)
- Fast Charge
- Vibration Strength control
- Compiled with latest UBER 5.3 GCC toolchain
- Latest upstream patches: 3.4.112
- Many build flag optimizations (graphite, Ofast)
Installation:
- Make sure you're running a CM or AOSP-based Marshmallow ROM (Resurrection Remix, AOKP, etc..)
- Flash the zip in TWRP 3.0 (tested, recommended) or other compatible recovery
- Reboot
Source code
Airless Kernel CM-13.0
Bug reporting rules
Only use the DevDB bug report tool for reporting bugs, provide proper logs and state the ROM, its XDA thread and version you're using. All other reports will be ignored!!
You assume all responsibility for anything that may happen
and I cannot and will not be held responsible
for anything that may happen to your device as a result of flashing a kernel.
*FLASH AT YOUR OWN RISK*
XDA:DevDB Information
[KERNEL][ZR][6.0.1][CM/AOSP/RR] Airless Kernel, Kernel for the Sony Xperia ZR
Contributors
Daedroza, airlessproject
Kernel Special Features:
Version Information
Status: Testing
Created 2016-06-02
Last Updated 2016-06-05
This should fix f2fs bug that has been all over qsnc build 0509!
However, I'm thinking of a buildbot to create unofficial builds with qsnc's device trees and this complimentary kernel.
I have tested this on my own 0527 build, and it works great.
Also, please switch off mpdecision
Daedroza said:
So, here is Airless Kernel for Xperia Z, compatible with all CM/AOSP based Marshmallow ROMs.
Features:
CPU
- Governors: ondemand, interactive, performance, intellimm, yankactive, yankdemand, impulse, zzmoove, barry_allen
- Multicore Power Saving - tries to group tasks into the least cores possible
- Schedule workqueues on awake CPUs
- CPU Frequency underclock (192 MHz) and overclock (1.7 GHz) capability
- Voltage regulation
Thermal management
- Simplified and efficient thermal driver
- Flexible ramp threshold temperature
GPU
- Governors: simple, ondemand, performance
- 27 MHz idle frequency for ideal power saving
- Overclocked to 487 MHz
Sound
- Faux Sound Control allowing amplified speaker, headphones and microphones volume
Misc
- RGB subtractive color control
- I/O Schedulers: sioplus, bfq, fiops, zen, row, deadline, noop
- Dynamic FSYNC
- Kernel Samepage Merging
- ARM Auto Hotplug (mpdecision replacement) - no tunables
- Gentle Fair Sleepers
- PM: Power Suspend as a replacement to Early Suspend
- TCP congestion protocols: westwood, highspeed, cubic, reno
- Disabling of some well known wakelocks (e.g. msm_hsic_host)
- Double Tap to Wake
- Fast Charge
- Vibration Strength control
- Compiled with latest UBER 5.3 GCC toolchain
- Latest upstream patches: 3.4.112
- Many build flag optimizations (graphite, Ofast)
Installation:
- Make sure you're running a CM or AOSP-based Marshmallow ROM (Resurrection Remix, AOKP, etc..)
- Flash the zip in TWRP 3.0 (tested, recommended) or other compatible recovery
- Reboot
Source code
Github link
Bug reporting rules
Only use the DevDB bug report tool for reporting bugs, provide proper logs and state the ROM, its XDA thread and version you're using. All other reports will be ignored!!
You assume all responsibility for anything that may happen
and I cannot and will not be held responsible
for anything that may happen to your device as a result of flashing a kernel.
*FLASH AT YOUR OWN RISK*
*Please switch off MPDECISION in Kernel Auditor, it is causing issues. Everything else is stable.*
XDA:DevDB Information
[KERNEL][Z][6.0.1][CM/AOSP] Airless Kernel, Kernel for the Sony Xperia ZR
Contributors
Daedroza, airlessproject
Kernel Special Features:
Version Information
Status: Testing
Created 2016-06-02
Last Updated 2016-06-02
Click to expand...
Click to collapse
Download zip link?
See the download section @nostupidthing
Daedroza said:
See the download section @nostupidthing
Click to expand...
Click to collapse
Where is the download section sorry... I
---------- Post added at 11:59 AM ---------- Previous post was at 11:58 AM ----------
Ah git it
http://forum.xda-developers.com/devdb/project/?id=15524#downloads
(there seems to be a glitch with the page showing up on my phone's chrome)
it's kernel works on Resurreection Remix (CM13)???
ostadmaster said:
it's kernel works on Resurreection Remix (CM13)???
Click to expand...
Click to collapse
read first post by op
What are the best recommended settings of the kernel?
Very good kernel ....please update it , flashed on RR Mix 5.6.9 working fine so far.
sbm1976 said:
Very good kernel ....please update it , flashed on RR Mix 5.6.9 working fine so far.
Click to expand...
Click to collapse
Rom RR and this kernel stable ???thank you
So Double Tap to Wake is working fine on this kernel??
LaudaDev said:
So Double Tap to Wake is working fine on this kernel??
Click to expand...
Click to collapse
No, it is disabled. I have tried patching it, but it simply doesn't work.
Chum.zuizui said:
Rom RR and this kernel stable ???thank you
Click to expand...
Click to collapse
Some people are saying it is working, so I assume it's all right. Kernel is stable.
sbm1976 said:
Very good kernel ....please update it , flashed on RR Mix 5.6.9 working fine so far.
Click to expand...
Click to collapse
It will work even on future builds, if it doesn't let me know
neildalal said:
What are the best recommended settings of the kernel?
Click to expand...
Click to collapse
Don't know, everyone has a different taste. I use -> yankdemand , KSM turned off. But that's just how I like it.
Best kernel for mm(using tesla rom)
This is will work on rr 5.7.0?
Stable and smooth on RR 5.7.0 no bugs until now
Thanks
I have updated the source code with new thermal behaviour. I haven't tested this new stuff. I'm busy with cm kernel, so we could get closer to cm nightlies.
Thanks, feel free to compile or wait for me to do a major stable update
Daedroza said:
I have updated the source code with new thermal behaviour. I haven't tested this new stuff. I'm busy with cm kernel, so we could get closer to cm nightlies.
Thanks, feel free to compile or wait for me to do a major stable update
Click to expand...
Click to collapse
Yeaps.. nice to heae that!!!
I hope wifi will be fixed next update
Please improve battery management.And limit the battery uses I mean At 15% phone should turn off for battery life safety.
Røbin said:
And limit the battery uses I mean At 15% phone should turn off for battery life safety.
Click to expand...
Click to collapse
Heh, bad idea...
Why not rather you turn it off yourself when it goes down to 15%? I see no need to implement that behavior.
LaudaDev said:
Heh, bad idea...
Why not rather you turn it off yourself when it goes down to 15%? I see no need to implement that behavior.
Click to expand...
Click to collapse
Didn't you notice in stock rom?phone automatically turned off when battery goes down to 15% or 10% for battery health safety.And because this kernel is not stable yet this could cause battery damage like now I'm suffering with it.My phone battery had 26% charge but after a random reboot it causes a major damage to my battery.Its complete dead now.I don't think its battery fault.I'm using my phone for 3 years and I never faced such problem.
Nope. The thing you described is actually because you have a bad battery.
Phone is meant to shut down at 0% and that's the stock kernel behavior with a good battery. Otherwise, it's up to you if you want to shut it down when it gets to 15%.
Sent from my C5503 using Tapatalk
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, DO NOT
* point the finger at me for messing up your device.
* this kernel is only for the S5 mini SM-G8OOF/M/Y (Exynos) Do Not Flash this on any other device!
*/
19-10-2017 * Updated to v6.0 * Changes are in red or can be seen at the bottom of this post in the changelog: I am always applying patches to hopefully improve the kernel,so check out the "Patches and tweaks applied" section for a better view of the changes as well.
Notes
ALWAYS read the "Known Issues" section before flashing. I will add issues I have noticed or have been told about. Some may be VERY important. If you fail to do this and experience an issue that is listed I can not help you!
SELinux is set to permissive in this kernel. You can change this to enforcing at boot if you wish via an app like Kernel Adiutor-Mod
About voltage control: Setting frequencies that are unstable are going to cause lockups,freezes and reboots. This is NOT a fault in the kernel. My suggestion is to move the voltages up or down slowly (+/- 25) until you find some stable voltages that you're happy with.
Enough people were having problems with the 1.6ghz overclocked version that I've decided to release a non overclocked (1.5ghz) build as well. I would recommend trying the 1.6ghz and only if you experience a bootloop or instability then use the 1.5ghz version. I will not keep older versions of the 1.5ghz build up. Only the latest.
Having troubles deciding on a CPU governor or an I/O scheduler? Here is an amazing guide. All credits to Saber. Be sure to hit the thanks button. He obviously put a lot of time into that.
Features
Based on the latest Samsung kernel sources
Built an updated Sqlite3 (from version 3.9.2 -> 3.19.3 that will be pushed along with the kernel install (you can verify this by running "sqlite3 --version" in a terminal emulator before the new kernel install and then again after)
Compiled with self-built (ct-ng) UBERTC 8.0
Patched Linux to latest 3.4.113
Used anykernel2
Unlocked CPU frequencies: 200MHZ and 300MHZ
GPU overclocked to 600MHZ
CPU Overclocked to 1.6GHZ
CPU voltage control ( Max voltage =1500mV. Min voltage =600mV)
DriveDroid support (add sysfs entry for cdrom to LUNs)
Implemented zen-tune v4.5
Added CPU boost driver
Added PIE net scheduler
Added support for USB keyboards (You need This app)
Reduced vm_swappiness from 60 to 20
Added I/O scheduler switcher by sultanxda (changes the I/O scheduler for a specified request queue to Noop when the screen turns off in order to improve power consumption while the screen is off)
Added Fsync on/off
Added dynamic fsync
Added Dynamic management of dirty page writebacks (allows to have two different intervals for dirty page writebacks and to dynamically manage them when the system has been resumed (it's active) or when has been suspended - Not adjustable via Grarak's Kernel Adiutor app)
Proc: much faster /proc/vmstat
Full CIFS support ( Modules will be pushed with kernel install )
Introduced new flag WQ_POWER_EFFICIENT for power oriented workqueues ( Allows for power saving if selected in Kernel Adiutor ETC. )
Added /dev/frandom support ( It is yet to be implemented properly yet however )
Properly enabled faux123's powersuspend v2.5
Fading LED's
Enabled graphite
Enabled AIO
Readahead set to 512 (from 128 default)
Reverted "Enabled arch power" (There will be a switch to enable/disable this in the next build)
Many build flags for optimization
Added optimization flags for the GPU
Many more features being worked on and coming soon
Added CPU governors
- nightmare
- wheatley
- zzmoove
- dancedance
- darkness
- hyper
- lionheart
- ondemandplus
- bioshock
- pegasusq
- smartmax
- alucard (by alucard24)
- bluactive
- intelliactive (by faux123)
- intellidemand
Added CPU hotplug governors
- alucard hotplug (by alucard24)
- intelliplug hotplug (by faux123)
- thunderplug hotplug (by varun.chitre15)
- MSM Sleeper hotplug
- autoSMP hotplug
Added IO schedulers
- fiops
- sio
- zen
- fifo
- tripndroid
- bfq-v7r8
Added many TCP congestions
- reno
- vegas
- westwood and more
- Added the rest of the TCP congestions
- Westwood is now default TCP
Patches and tweaks applied include:
- Updated ARM topology and added cpu_power driver
- Input: Improve the events-per-packet estimate
- block/partitions: optimize memory allocation in check_partition()
- block: bfq-iosched: tuning for SSD (thanks to anarkia1976)
- cpufreq: Move get_cpu_idle_time() to cpufreq.c (This is important for CPU governors to work better/more efficiently with our kernel version-3.4)
- Fixed all the CPU governors to work properly with the Move get_cpu_idle_time
- cpufreq: Introduce new relation for freq selection (It selects the frequency with the minimum euclidean distance to target. In case of equal distance between 2 frequencies, it will select the greater frequency)
- cpufreq: conservative: Set MIN_LATENCY_MULTIPLIER to 20
- cpufreq-ondemand-Set-MIN_LATENCY_MULTIPLIER-to-20
- cpuidle-Get-typical-recent-sleep-interval
- cpufreq: Persist cpufreq time in state data across hotplug
- implement-LoUIS-API-for-cache-maintenance-operations
- ARM-kernel-update-cpu_disable-to-use-cache-LoUIS-maintenance API
- update-v7_setup-to-the-new-LoUIS-cache-main
- USB-gadget Optimize-tx-path-for-better-performance
- af_unix: speedup /proc/net/unix
- net/socket.c: fix: warning: 'sock/sock1/sock2' may be used uninitialized in this function
- fs/proc/array.c: make safe access to group_leader
- lib/memcopy: use glibc version (the kernel's memcpy and memmove is very inefficient. But the glibc
version is quite fast, in some cases it is 10 times faster than the kernel version)
- lib/string: use glibc version (same as above)
- lib/int_sqrt.c: optimize square root algorithm
- readahead: make context readahead more conservative
- sched-Fix-select_idle_sibling-bouncing-cow-syndrome
- sched-Implement-smarter-wake-affine-logic
- sched-Micro-optimize-the-smart-wake-affine-logic
- sched: Reduce overestimating rq->avg_idle
- power: make sync on suspend optional
- tcp: tweaked for speed
- writeback-fix-occasional-slow-sync
- writeback-fix-writeback-cache-thrashing
- wireless - bcmdhd - reduce scan dwell time to reduce power usage
- bcmdhd reduce wakelocks
- mutex-Queue-mutex-spinners-with-MCS-lock-to-reduce-cc
- mutex-Make-more-scalable-by-doing-less-atomic-operations
- ARM-use-generic-unaligned.h
- Kconfig-enabled-unaligned-capability-for-ARM
- decompressor-Enabled-unaligned-memory-access
- Optimized-ARM-RWSEM-algorithm
- ARM: Fixed negative idle stats for offline cpu
- disabled debugfs[/COLOR]
- mm: remove noisy remainder of the scan_unevictable interface
CONFIG_HZ=100 (reverted commit)
- Plus many more - Check my git repo for full details.
Sources
Kernel Source
Toolchain Source
Click to expand...
Click to collapse
Known Issues
Setting alucard hotplug along with certain other governors at boot via kernel adiutor etc can cause a reboot after setting is applied. So be certain to set the "delay" time in kernel adiutor or similar to 10 seconds or more,so if you have this you are able to cancel and change after a reboot.
There is a chance of some settings being reset after flashing the kernel (quick setting,sound,statusbar etc.) This is rather insignificant and all settings that have been changed can be set back in minutes.
Click to expand...
Click to collapse
Installation
I HIGHLY recommend that you do a full backup before flashing this kernel. I am not responsible if you lose any or all of your data.
1.Download "Spookcity_Kernel-N"
2.Place the zip onto your phones storage
3.Reboot into recovery (Volume-Up + Home + Power button)
4.Select install
5.Flash the downloaded kernel
6.Go back a few times in TWRP Select wipe -> Advanced wipe and wipe Dalvik/Art cache and the cache partition.
If you do not do this you are very likely to experience strange issues.You have been warned.Do not report problems if you did not do this.
7.Reboot
Click to expand...
Click to collapse
Code:
Feedback can also be posted[URL="https://github.com/Spookcity/ROMS-G800F/issues/12"]-------> Here[/URL]
Test builds will be released [URL="https://github.com/Spookcity/ROMS-G800F/issues/22"]-------> Here[/URL]
Download the latest build
Spookcity_Kernel-N-v6.0
Spookcity_Kernel-N-v6.0-1.5GHZ Version
Click to expand...
Click to collapse
Download older version
Code:
[URL="https://www.androidfilehost.com/?fid=745425885120759188"]Version 5.0[/URL]
[URL="https://www.androidfilehost.com/?fid=889764386195920916"]Version 4.0[/URL]
[URL="https://www.androidfilehost.com/?fid=673368273298972709"]Version 3.0[/URL]
[URL="https://www.androidfilehost.com/?fid=889764386195913162"]Version 2.0[/URL]
[URL="https://www.androidfilehost.com/?fid=889764386195911617"]Version 1.0[/URL]
Huge credit and many thanks to:
Hennymcc,Ayke,Psyafter,mirhciulica,ctxZ,DjSteve,CurtisMJ,osm0sis,Archidroid,Chet Kener,andip71,faux123,flar2,ZaneZam,anarkia1976,AndreiLux,Yank,Francisco Franco,Sultanxda,varun.chitre15
Big thanks for testing and giving feedback:
Oleggluk,StanleyNL,Mikahlo,Guntzog
and any others as I'm sure I am forgetting people.
CHANGELOG
HTML:
01-09-2017 - Released Version 6.0
- Added MSM Sleeper hotplug
- Reduced vm_swappiness from 60 to 20
- Added intellidemand governor
- Added autoSMP hotplug
- Added CPU boost driver
- Proc: much faster /proc/vmstat
- Cpufreq: Persist cpufreq time in state data across hotplug
- Reverted "enable arch power"
- mm: remove noisy remainder of the scan_unevictable interface
- net/socket.c: fix: warning: 'sock/sock1/sock2' may be used uninitialized in this function
01-09-2017 - Released Version 5.0
- Removed ROW I/O scheduler
- Added I/O scheduler switcher by sultanxda
- Added PIE net scheduler
- Added support for USB keyboards
- Properly enabled faux123's powersuspend v2.5
- Added dynamic fsync
- Added optimization flags for the GPU
- Enabled AIO
- Reverted a couple of HZ related commits
- Added intelliactive governor
- Added intelliplug hotplug driver
- Added thunderplug hotplug driver
- Added Dynamic management of dirty page writebacks
- Fixed voltage control on 1500MHZ version
- Fixed alucard governor
- Fixed ondemandplus governor
- Fixed bluactive governor
- ib/int_sqrt.c: optimize square root algorithm
- af_unix: speedup /proc/net/unix
- wireless - bcmdhd - reduce scan dwell time to reduce power usage
- bcmdhd reduce wakelocks
- readahead: make context readahead more conservative
- block/partitions: optimize memory allocation in check_partition()
- power: make sync on suspend optional
- block: bfq-iosched: tuning for SSD
05-08-2017 - Released Version 4.0
- Added 1.5GHZ version
- Added voltage control
- DriveDroid support
- Implemented zen-tune v4.5
- Full CIFS support
- Introduce new flag WQ_POWER_EFFICIENT for power oriented workqueues
- Added Fsync on/off
- Added ROW I/O sheduler
- Added BFQ-v7r8 I/O scheduler for 3.4 kernel
- Added Blu_active CPU governor
- block: disabled add_random
- tweaked build flags
- many workqueue related patches
- tcp: tweaked for speed
- CONFIG_HZ=300
- fs/proc/array.c: make safe access to group_leader
- disabled debugfs
19-07-2017 - Released Version 3.0
-GPU overclocked to 600MHZ
-Updated Sqlite3 to version 3.19.3 from 06-08-2017
Added CPU governors
-bioshock
-pegasusq
-smartmax
-alucard
-alucard hotplug
-Added the rest of the TCP congestions
-cpufreq: Move get_cpu_idle_time() to cpufreq.c
-Fixed all the CPU governors to work properly with the Move get_cpu_idle_time
-Added /dev/frandom support
-cpufreq: Introduce new relation for freq selection
-lib/memcopy: use glibc version
-lib/string: use glibc version
-
03-07-2017 - Released Version 2.0
-GPU overclocked to 533MHZ
Added CPU governors
-dancedance
-darkness
-hyper
-lionheart
-ondemandplus
Added IO schedulers
-fifo
-tripndroid
Added many TCP congestions
-reno
-vegas
-westwood
-etc.
26-06-2017 - Fix "unsupported device" when flashing in TWRP 3.1.1.0
23-06-2017 - Initial release
Enjoy!
XDA:DevDB Information
[KERNEL] [G800F/M/Y] Spookcity_Kernel-N (For all 7.x custom ROMS), Kernel for the Samsung Galaxy S5 Mini
Contributors
spookcity138
Kernel Special Features:
Version Information
Status: Beta
Created 2017-06-23
Last Updated 2017-10-19
At 2Mb less than the test version. Has something removed or new compression?
On RR works.
Oleggluk said:
At 2Mb less than the test version. Has something removed or new compression?
On RR works.
Click to expand...
Click to collapse
Yeah,I have temporarily removed synapse support. This is the reason its 2mb smaller. I will add it back once I have some things fixed. Too many things just don't work with it right now.
Sent from my SM-G800F using Tapatalk
And the test version will be?
Oleggluk said:
And the test version will be?
Click to expand...
Click to collapse
Not positive what you mean. If you mean the size it will be the same as this as I haven't messed with synapse any yet. If you're talking about the features I've added since this build,you can have a look Here to get some idea of what I've done so far.
spookcity138 said:
Not positive what you mean. If you mean the size it will be the same as this as I haven't messed with synapse any yet. If you're talking about the features I've added since this build,you can have a look Here to get some idea of what I've done so far.
Click to expand...
Click to collapse
Now I do not understand anything)). Alucard has already been added, GPU OC to 600mhz, fifo, tripndroid and vr IO sched .....? Or will be added to the test version.
Oleggluk said:
Now I do not understand anything)). Alucard has already been added, GPU OC to 600mhz, fifo, tripndroid and vr IO sched .....? Or will be added to the test version.
Click to expand...
Click to collapse
Hehe,yes. This build is based on the "OC CPU to 1.6" commit. So it includes everything before that,but nothing after. I will probably be releasing test builds in increments. Meaning,the next test build (hopefully this weekend) will still not include all that you see committed on my github repo. I want to do it this way to better be able to diagnose possible bugs and their reasons. So I'll release a test build on github. Have you and others willing to test give me feedback about any problems. Then release it on here...and then repeat these steps. Hope that makes some sense [emoji3]
Sent from my SM-G800F using Tapatalk
spookcity138 said:
Hehe [emoji3]
Click to expand...
Click to collapse
It is certainly correct and logical, so it will be easier to search for the culprit of mistakes.
But I want to try everything at once))
Oleggluk said:
It is certainly correct and logical, so it will be easier to search for the culprit of mistakes.
But I want to try everything at once)) :еек:
Click to expand...
Click to collapse
I'll make sure the next test build includes much of the new stuff. I'm a little bit worried that the GPU overclock is going to turn into a nightmare like the CPU overclock though. Guess we will find out. Fingers crossed.
Sent from my SM-G800F using Tapatalk
I would very much like to see voltage regulation. Is there such a function?
I can test the overclocking of the GPU as well as the CPU 1700)))
Oleggluk said:
I would very much like to see voltage regulation. Is there such a function?
I can test the overclocking of the GPU as well as the CPU 1700)))
Click to expand...
Click to collapse
Haha,You're definitely not testing any CPU overclocking [emoji3]
I have started messing with voltage control. I've enabled access,but at this point I'm unsure how you would access it as its not included in kernel adiutor and I've yet to properly set up synapse. Either way,the access is there,but the ability to actually change the voltages is not currently working. I believe I need to tweak a few things and add at least 1 additional file. Soon to come I hope.
Sent from my SM-G800F using Tapatalk
Good stuff, changing SElinux to enforcing make sim card not detectable is there a recommended config for better battery?
guntzog said:
Good stuff, changing SElinux to enforcing make sim card not detectable is there a recommended config for better battery?
Click to expand...
Click to collapse
Honestly I'm unsure off hand. However,I did enable arch power by default,so that should help battery life some. I have been working on the kernel recently and have added alucard and alucard hotplug CPU governors. This will come in the near future and I believe could really help with battery life.
I have some problems with kernel. After update my RR 5.8.3 i try to instal your kernel, but TWRP showed me that error message "Unsupported device. Aborting...
Updater process ended with ERROR: 1". I have a G800F and i don't know why kernel can't install. I attached my recovery.log file
View attachment recovery.log
upd. : it was a new twrp. I installed old version twrp and try to install kernel. And kernel was installed
GeorgianGreek said:
I have some problems with kernel. After update my RR 5.8.3 i try to instal your kernel, but TWRP showed me that error message "Unsupported device. Aborting...
Updater process ended with ERROR: 1". I have a G800F and i don't know why kernel can't install. I attached my recovery.log file
View attachment 4193251
Click to expand...
Click to collapse
Yes,this has something to do with the latest TWRP I believe as I now get this error as well. I'm not sure why. I'll look into it. To "fix" it for now. Open up the zip (don't unzip it) then open the anykernel.sh file with a text editor and change the line "do.devicecheck=1" to "do.devicecheck=0" Then it skips the device check and will be fine.
Sent from my SM-G800F using Tapatalk
spookcity138 said:
Yes,this has something to do with the latest TWRP I believe as I now get this error as well. I'm not sure why. I'll look into it. To "fix" it for now. Open up the zip (don't unzip it) then open the anykernel.sh file with a text editor and change the line "do.devicecheck=1" to "do.devicecheck=0" Then it skips the device check and will be fine.
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
Some changes in the name of the device with a new twrp. Kminiltexx is kminilte
Oleggluk said:
Some changes in the name of the device with a new twrp. Kminiltexx is kminilte
Click to expand...
Click to collapse
Ahh,that explains it. Thanks! Easy fix then.
Edit:
Fixed
Sent from my SM-G800F using Tapatalk
Just flashed the kernel and the mobile got stuck in a boot loop. Tried it second time: First very long boot, then crash.
I wiped dalvik/art cache and cache partition via TWRP 3.1.1.0. Anyone else has/had this? Suggestions?
Schweng said:
Just flashed the kernel and the mobile got stuck in a boot loop. Tried it second time: First very long boot, then crash.
I wiped dalvik/art cache and cache partition via TWRP 3.1.1.0. Anyone else has/had this? Suggestions?
Click to expand...
Click to collapse
I have not had this problem and haven't had anyone mention it to me. What model is your phone? F,M or Y? What ROM?
Sent from my SM-G800F using Tapatalk
spookcity138 said:
I have not had this problem and haven't had anyone mention it to me. What model is your phone? F,M or Y? What ROM?
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
Model is F.
Rom is 14.1 Lineage, the 20170226 version from Ayke, i think.