So, here is Airless Kernel for Xperia ZR, compatible with all CM/AOSP based Marshmallow ROMs.
Features:
CPU
- Governors: ondemand, interactive, performance, intellimm, yankactive, yankdemand, impulse, zzmoove, barry_allen
- Multicore Power Saving - tries to group tasks into the least cores possible
- Schedule workqueues on awake CPUs
- CPU Frequency underclock (192 MHz) and overclock (1.7 GHz) capability
- Voltage regulation
Thermal management
- Simplified and efficient thermal driver
- Flexible ramp threshold temperature
GPU
- Governors: simple, ondemand, performance
- 27 MHz idle frequency for ideal power saving
- Overclocked to 487 MHz
Sound
- Faux Sound Control allowing amplified speaker, headphones and microphones volume
Misc
- RGB subtractive color control
- I/O Schedulers: sioplus, bfq, fiops, zen, row, deadline, noop
- Dynamic FSYNC
- Kernel Samepage Merging
- ARM Auto Hotplug (mpdecision replacement) - no tunables
- Gentle Fair Sleepers
- PM: Power Suspend as a replacement to Early Suspend
- TCP congestion protocols: westwood, highspeed, cubic, reno
- Disabling of some well known wakelocks (e.g. msm_hsic_host)
- Fast Charge
- Vibration Strength control
- Compiled with latest UBER 5.3 GCC toolchain
- Latest upstream patches: 3.4.112
- Many build flag optimizations (graphite, Ofast)
Installation:
- Make sure you're running a CM or AOSP-based Marshmallow ROM (Resurrection Remix, AOKP, etc..)
- Flash the zip in TWRP 3.0 (tested, recommended) or other compatible recovery
- Reboot
Source code
Airless Kernel CM-13.0
Bug reporting rules
Only use the DevDB bug report tool for reporting bugs, provide proper logs and state the ROM, its XDA thread and version you're using. All other reports will be ignored!!
You assume all responsibility for anything that may happen
and I cannot and will not be held responsible
for anything that may happen to your device as a result of flashing a kernel.
*FLASH AT YOUR OWN RISK*
XDA:DevDB Information
[KERNEL][ZR][6.0.1][CM/AOSP/RR] Airless Kernel, Kernel for the Sony Xperia ZR
Contributors
Daedroza, airlessproject
Kernel Special Features:
Version Information
Status: Testing
Created 2016-06-02
Last Updated 2016-06-05
This should fix f2fs bug that has been all over qsnc build 0509!
However, I'm thinking of a buildbot to create unofficial builds with qsnc's device trees and this complimentary kernel.
I have tested this on my own 0527 build, and it works great.
Also, please switch off mpdecision
Daedroza said:
So, here is Airless Kernel for Xperia Z, compatible with all CM/AOSP based Marshmallow ROMs.
Features:
CPU
- Governors: ondemand, interactive, performance, intellimm, yankactive, yankdemand, impulse, zzmoove, barry_allen
- Multicore Power Saving - tries to group tasks into the least cores possible
- Schedule workqueues on awake CPUs
- CPU Frequency underclock (192 MHz) and overclock (1.7 GHz) capability
- Voltage regulation
Thermal management
- Simplified and efficient thermal driver
- Flexible ramp threshold temperature
GPU
- Governors: simple, ondemand, performance
- 27 MHz idle frequency for ideal power saving
- Overclocked to 487 MHz
Sound
- Faux Sound Control allowing amplified speaker, headphones and microphones volume
Misc
- RGB subtractive color control
- I/O Schedulers: sioplus, bfq, fiops, zen, row, deadline, noop
- Dynamic FSYNC
- Kernel Samepage Merging
- ARM Auto Hotplug (mpdecision replacement) - no tunables
- Gentle Fair Sleepers
- PM: Power Suspend as a replacement to Early Suspend
- TCP congestion protocols: westwood, highspeed, cubic, reno
- Disabling of some well known wakelocks (e.g. msm_hsic_host)
- Double Tap to Wake
- Fast Charge
- Vibration Strength control
- Compiled with latest UBER 5.3 GCC toolchain
- Latest upstream patches: 3.4.112
- Many build flag optimizations (graphite, Ofast)
Installation:
- Make sure you're running a CM or AOSP-based Marshmallow ROM (Resurrection Remix, AOKP, etc..)
- Flash the zip in TWRP 3.0 (tested, recommended) or other compatible recovery
- Reboot
Source code
Github link
Bug reporting rules
Only use the DevDB bug report tool for reporting bugs, provide proper logs and state the ROM, its XDA thread and version you're using. All other reports will be ignored!!
You assume all responsibility for anything that may happen
and I cannot and will not be held responsible
for anything that may happen to your device as a result of flashing a kernel.
*FLASH AT YOUR OWN RISK*
*Please switch off MPDECISION in Kernel Auditor, it is causing issues. Everything else is stable.*
XDA:DevDB Information
[KERNEL][Z][6.0.1][CM/AOSP] Airless Kernel, Kernel for the Sony Xperia ZR
Contributors
Daedroza, airlessproject
Kernel Special Features:
Version Information
Status: Testing
Created 2016-06-02
Last Updated 2016-06-02
Click to expand...
Click to collapse
Download zip link?
See the download section @nostupidthing
Daedroza said:
See the download section @nostupidthing
Click to expand...
Click to collapse
Where is the download section sorry... I
---------- Post added at 11:59 AM ---------- Previous post was at 11:58 AM ----------
Ah git it
http://forum.xda-developers.com/devdb/project/?id=15524#downloads
(there seems to be a glitch with the page showing up on my phone's chrome)
it's kernel works on Resurreection Remix (CM13)???
ostadmaster said:
it's kernel works on Resurreection Remix (CM13)???
Click to expand...
Click to collapse
read first post by op
What are the best recommended settings of the kernel?
Very good kernel ....please update it , flashed on RR Mix 5.6.9 working fine so far.
sbm1976 said:
Very good kernel ....please update it , flashed on RR Mix 5.6.9 working fine so far.
Click to expand...
Click to collapse
Rom RR and this kernel stable ???thank you
So Double Tap to Wake is working fine on this kernel??
LaudaDev said:
So Double Tap to Wake is working fine on this kernel??
Click to expand...
Click to collapse
No, it is disabled. I have tried patching it, but it simply doesn't work.
Chum.zuizui said:
Rom RR and this kernel stable ???thank you
Click to expand...
Click to collapse
Some people are saying it is working, so I assume it's all right. Kernel is stable.
sbm1976 said:
Very good kernel ....please update it , flashed on RR Mix 5.6.9 working fine so far.
Click to expand...
Click to collapse
It will work even on future builds, if it doesn't let me know
neildalal said:
What are the best recommended settings of the kernel?
Click to expand...
Click to collapse
Don't know, everyone has a different taste. I use -> yankdemand , KSM turned off. But that's just how I like it.
Best kernel for mm(using tesla rom)
This is will work on rr 5.7.0?
Stable and smooth on RR 5.7.0 no bugs until now
Thanks
I have updated the source code with new thermal behaviour. I haven't tested this new stuff. I'm busy with cm kernel, so we could get closer to cm nightlies.
Thanks, feel free to compile or wait for me to do a major stable update
Daedroza said:
I have updated the source code with new thermal behaviour. I haven't tested this new stuff. I'm busy with cm kernel, so we could get closer to cm nightlies.
Thanks, feel free to compile or wait for me to do a major stable update
Click to expand...
Click to collapse
Yeaps.. nice to heae that!!!
I hope wifi will be fixed next update
Please improve battery management.And limit the battery uses I mean At 15% phone should turn off for battery life safety.
Røbin said:
And limit the battery uses I mean At 15% phone should turn off for battery life safety.
Click to expand...
Click to collapse
Heh, bad idea...
Why not rather you turn it off yourself when it goes down to 15%? I see no need to implement that behavior.
LaudaDev said:
Heh, bad idea...
Why not rather you turn it off yourself when it goes down to 15%? I see no need to implement that behavior.
Click to expand...
Click to collapse
Didn't you notice in stock rom?phone automatically turned off when battery goes down to 15% or 10% for battery health safety.And because this kernel is not stable yet this could cause battery damage like now I'm suffering with it.My phone battery had 26% charge but after a random reboot it causes a major damage to my battery.Its complete dead now.I don't think its battery fault.I'm using my phone for 3 years and I never faced such problem.
Nope. The thing you described is actually because you have a bad battery.
Phone is meant to shut down at 0% and that's the stock kernel behavior with a good battery. Otherwise, it's up to you if you want to shut it down when it gets to 15%.
Sent from my C5503 using Tapatalk
Related
This is a port of Optimus Kernel by Flashhhh for Peregrine
Must sure to thank him - Here
Not compatible with Dirty Unicorns atm as it's using the older cm-12.0 kernel source meaning wifi will not work if this is flashed.
I present to you my own kernel which has been built with many optimizations and tweaks. This kernel will work on lollipop roms(Not for stock roms) only.The main aim is to provide a stable kernel with optimizations.
I hope you all will like it
Enjoy!
Note: R12 or later will work perfectly only on LP bootloader. You need to be on a rom which has implemented new kernel sources. Read post #3 about bricked hotplug.
Custom Features:
- Compiled With Archdroid's 5.2 Toolchain
- Updated to latest CM131 Sources
- Compiled With -O3 & Graphite Flags
- Additional many optimization flags
- Compiled With Cortex A7 Tweaks
- ARM v7 Optimizations
- Mpdecision hotplug driver(Using custom powerhal by CM)
- DoubleTap2Wake/Sweep2Wake
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- Adreno Idler Algorithm
- PowerSuspend Driver v1.5
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- Optimized ARM RWSEM Algorithm
- Optimized Square Root Algorithm
- LMK tweaks
- block: disable add_random
- Enable unaligned capability for ARM
- CpuFreq and CpuBoost Optimizations
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Use your android device as USB Keyboard/Mouse
- Enabled FSync by default
- Optimized Slub
- VFP HardFloat
- Power Efficient WorkQueues
- Kexec patched (Multirom Compatible)
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Pls Read This before flashing:
You need ROM's default kernel before flashing this as this kernel makes use of AnyKernel 2 by @osm0sis. Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.(At least dirty flash rom+kernel) Credits to @attack11 for some part of install script.Read FAQ's and changelogs in 2nd post. THIS KERNEL COMES FINE TUNED OUT OF THE BOX.
DOWNLOADS:
AndroidFileHost
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Reinstall(Dirty flash) Rom + the kernel
4. Reboot and enjoy!
PLS DON'T MIRROR THE LINKS
Recommended app:
Synapse or Kernel Adiutor
Flash UKM.zip from the below link: (credits to @apb_axel)
http://forum.xda-developers.com/android/software/zip-synapse-script-universal-kernel-t2736986
And then install synapse from play store.
I would like to say special thanks to @Flashhhh for allowing me to port his kernel and stealing his OP
@faux123 @YoshiShaPow @fermasia @Alberto97 @TeamMex @Quasar @Mazda @FabioSan @Blechdose @neobuddy89 @RenderBroken @savoca @deadman96385 @pinkflozd @alin.p @Cl3Kener @Shivam Kuchhal and CYANOGENMOD TEAM
and MANY MORE...
XDA:DevDB Information
Optimus Kernel, Kernel for the Moto G
Contributors
Kayant, Flashhhh
Source Code: https://github.com/Kayant/android_kernel_motorola_msm8226
Kernel Special Features:
Version Information
Status: Stable
Created 2015-05-10
Last Updated 2016-01-17
Reserved
Looking for changelogs??
Marshmallow Releases -
R46 - http://forum.xda-developers.com/showpost.php?p=63788257&postcount=2395
R47 - http://forum.xda-developers.com/showpost.php?p=63923077&postcount=2399
R48 - http://forum.xda-developers.com/showpost.php?p=63952176&postcount=2417
R49 - http://forum.xda-developers.com/showpost.php?p=64110186&postcount=2431
R50 - http://forum.xda-developers.com/showpost.php?p=64389138&postcount=2449
R51 - http://forum.xda-developers.com/showpost.php?p=64468320&postcount=2461
R52 - http://forum.xda-developers.com/showpost.php?p=64511085&postcount=2462
R53 - http://forum.xda-developers.com/showpost.php?p=64652842&postcount=2479
R54 - http://forum.xda-developers.com/showpost.php?p=64767486&postcount=2492
R55 - http://forum.xda-developers.com/showpost.php?p=64818240&postcount=2509
------------------------------------------------------------------------------------------------------------------
Lollipop releases
R32 - http://forum.xda-developers.com/showpost.php?p=60951752&postcount=1661
R33 - http://forum.xda-developers.com/showpost.php?p=61101376&postcount=1706
R34 - http://forum.xda-developers.com/sho...ers.com/showpost.php?p=61345718&postcount=310
R4 - http://forum.xda-developers.com/showpost.php?p=61420409&postcount=350
R38 - http://forum.xda-developers.com/showpost.php?p=61863825&postcount=2038
R41 - http://forum.xda-developers.com/showpost.php?p=62566814&postcount=2195, http://forum.xda-developers.com/showpost.php?p=62450985&postcount=2128
R42 - http://forum.xda-developers.com/show...postcount=2306
R43 - http://forum.xda-developers.com/show...postcount=2326
R44 - http://forum.xda-developers.com/show...postcount=2342
F.A.Q. - Read this before complaining!
1. My phone exploded, HELP!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
2. This kernel works on Y or X rom?
A: Works on CM12/12.1 and AOSP roms that have the latest wifi drivers. Not for stock roms!!
3. OMG BATTERY SUCKZ, ITZ DEAD IN 45 MINUTES, HELP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
4. How do I flash this?
A: Read the OP, theres a reason why I added instructions on it.
5. What is a data loss? Did I just had one?
A: Data loss is simply having the connection cut for X periods of time, usually few seconds. Grey bars means the device is not connected to Google services for some weird reason, but you'll still have internet connection.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
7. D2TW not working? It may be a hardware issue
A: http://forum.xda-developers.com/showpost.php?p=64116915&postcount=138
Reserved
Many thanks to showp1984 for this info
What is msm_mpdecision?
100% kernel based multi core decision! (should cpu1/2/3 be online or not?)
This is a special version modded by neobuddy Plus the idle frequency and some load thresholds have been adjusted by me.
Some Configuration:
startdelay = time until mpdecision starts doing it's magic (20000)
delay = time between checks (130)
pause = if something else plugs in the cpu, fall asleep for 10000ms (10 secs)
scroff_single_core = if the screen is off, don't plug in cpu1/2/3. Additionally: Unplug all cpus except cpu0 when screen is turned off (1)
enabled = enable(1) or disable(0) mpdecision. This does not affect scroff_single_core!
min_cpus = min cpus to be online, cannot be < 1. Default: 1
max_cpus = max cpus to be online, cannot be > 4. (if you set it to 2 and min_cpus to 1 you will basically have a dualcore) Default: 4
idle_freq = a value against that will be checked if a core +/- is requested. (600 MHz)
mpdecision's input event boost, aka project butter
This will boost your min cpu speed if you touch the screen or press a button and gives you full control.
In those events the min cpu freq will be risen to a predefined value on every online cpu. This boosts overall reaction times and smoothness a lot. (works similar to the qcom mpdecision binary)
Thanks for bringing another kernel to our device, Kayant! Much respect!
On a side note, is Pink Kernel no longer being updated on the original developer's side, or have you abandoned it??
Thanks as always!
Thank you for your work, I will give it a try immediately!
hhrokarvi said:
Thanks for bringing another kernel to our device, Kayant! Much respect!
On a side note, is Pink Kernel no longer being updated on the original developer's side, or have you abandoned it??
Thanks as always!
Edit: Works Great with Dirty Unicorns and AICP!!
Click to expand...
Click to collapse
More developer side but from looking at github pinkflozd might be coming back soon maybe?
@Kayant good work dude!
So the reason my dt2w doesn't work is because I changed my screen? Thank you for clarifying that for me. I had a feeling that was my issue but I wasn't certain.
Sent from my Moto G 4G LTE (XT1045) Retail US variant
ROM: SaberMod 10 (5.1.1) 4/30 build
Carrier: Cricket Wireless
is it good for daily use?
Some of the option you have listed in the OP seem not to be present, I am referring to CPU underclocking (min freq. 300 MHz here) and GPU under/overclocking (min 200, max. 450)
My xt1039 does not boot... It shows the motorola logo, then il vibrates and the screen becames black.
I'm using the beeto's CM 12.1 and I can't find the log file..
Got another issue, too. IntelliPlug (max frequency with screen off: 300 MHz), Interactive governor. When I woke up the phone and started scrolling around, I found it a bit laggy; I checked in Kernel Adiutor, max and min frequencies were both set to 787 MHz, even though I personally set them to 300 MHz/1194 MHz before. Reverted back to Spirit Kernel for now!
Gianlu92 said:
Some of the option you have listed in the OP seem not to be present, I am referring to CPU underclocking (min freq. 300 MHz here) and GPU under/overclocking (min 200, max. 450)
Click to expand...
Click to collapse
Gianlu92 said:
Got another issue, too. IntelliPlug (max frequency with screen off: 300 MHz), Interactive governor. When I woke up the phone and started scrolling around, I found it a bit laggy; I checked in Kernel Adiutor, max and min frequencies were both set to 787 MHz, even though I personally set them to 300 MHz/1194 MHz before. Reverted back to Spirit Kernel for now!
Click to expand...
Click to collapse
You right I have updated the OP. There shouldn't be any problems will GPU stuff weird....
sclcn12 said:
My xt1039 does not boot... It shows the motorola logo, then il vibrates and the screen becames black.
I'm using the beeto's CM 12.1 and I can't find the log file..
Click to expand...
Click to collapse
Not sure why that would happen tbh. Were you on the stock kernel when you flashed?
Kayant said:
You right I have updated the OP. There shouldn't be any problems will GPU stuff weird....
Not sure why that would happen tbh. Were you on the stock kernel when you flashed?
Click to expand...
Click to collapse
Kayant I faced that issue as well. Apparently I tried to flash it on AICP, Beeto's Unofficial CM 12.1... It showed the bootlogo and then it would stay blank till I restart it or something. And I did reflash the ROM's cleanly before flashing this kernel
However it works fine on Official CM12.1 and BlissPOP.
Am I missing something?? Can @Flashhhh help some fellow Peregriners????
Kayant said:
Not sure why that would happen tbh. Were you on the stock kernel when you flashed?
Click to expand...
Click to collapse
Yes I was! Will try with another ROM, I'll flash AICP
Thank you anyway!
(If you have some time, take a look to slimrom thread, thanks )
Just flashed on official CM 12.1.
So far the frequencies seems to be workning as they should, will report back if anything weird happens. Using the kernels stock settings.
hhrokarvi said:
Kayant I faced that issue as well. Apparently I tried to flash it on AICP, Beeto's Unofficial CM 12.1... It showed the bootlogo and then it would stay blank till I restart it or something. And I did reflash the ROM's cleanly before flashing this kernel
However it works fine on Official CM12.1 and BlissPOP.
Am I missing something?? Can @Flashhhh help some fellow Peregriners????
Click to expand...
Click to collapse
Can u ask on rom's thread if they don't use modified ramdisk?
Flashhhh said:
Can u ask on rom's thread if they don't use modified ramdisk?
Click to expand...
Click to collapse
He said "I used CM Sources and I don't think they're modified."
hhrokarvi said:
He said "I used CM Sources and I don't think they're modified."
Click to expand...
Click to collapse
Ok I'll talk to @Kayant and try to solve the issue
Flashhhh said:
Ok I'll talk to @Kayant and try to solve the issue
Click to expand...
Click to collapse
Thanks Brother!! Looking forward to the outcome!!
Hi guys,
I want to present my kernel for the Samsung Galaxy S3, that allows you to overclock up to 2 GHz. This kernel is based on the official Boeffla kernel for CM14. Although the official Boeffla kernel supports CM14.0 and CM14.1, my kernel supports CM14.1 only, because CM14.0 for the SGS3 isn't supported by the CM team anymore. It may run on CM14.0 as well, but please don't report any errors if you use it with CM14.0 or any other OS than CM14.1.
Feature list:
- Every feature from official Boeffla-Kernel (6.1 final)
- Support for Synapse (partial) and Boeffla Config (fully)
- CPU overclocking up to 2 GHz
- CPU: 100MHz step added to save power
- Faster boot process due to some internal improvements
- 3 new governors added (adaptive, conservative, interactive)
- CPU voltage can be chosen between 600mV and 1600mV
- full F2FS support (backported from Linux 3.19)
- Charging current can be set up to 2.1 Amps
- Battery percentage never reaches 0%, so the phone won't turn off at low battery
- No overcharge anymore due to an internal improvement
- Early suspend adjustable up to 5000ms
- more undervolting profiles for the GPU
- much lower brightness can be set than on stock kernel; the display will be almost black on lowest brightness level (maximum possible brightness stays the same)
- Configurable kernel logger (turning kernel logger off is not stable on CM and LOS)
- compiled using GCC 7.2.1 by Linaro (Thanks to ZaneZam for publishing the kernel-specific GCC-6-code; this works with GCC 7 as well!)
For configuration I recommend Boeffla Config.
You can use your old config you had using the official Boeffla-Kernel, but this may lead to minor problems. So I'd recommend to reset Boeffla Config before you flash my kernel. If you already use my kernel and just upgrading it you can use the old config without any problems.
WARNING!!! Nobody except you can and will be responsible for a damaged or bricked phone due to my kernel. It's very unlikely that my kernel harms your phone, but it's not impossible.
Have fun using my kernel and feel free to ask questions about it!
Source code: Oebbler · GitHub
XDA:DevDB Information
Elite-Boeffla-Kernel, Kernel for the Samsung Galaxy S III I9300
Contributors
Oebbler1
Kernel Special Features: OC up to 2GHz, Support for Boeffla Config, Full F2FS support, Charging current up to 2.1 Amps
Version Information
Status: Stable
Current Stable Version: 6.1.0.2
Stable Release Date: 2018-12-20
Created 2016-12-27
Last Updated 2018-12-20
Changelog (CM14.1 only)
6.0.0.1-beta1
First Release
this kernel includes every feature and bugfix of Boeffla-Kernel 5.1.0.5 (for CM13.0)
Full F2FS support
6.0.0.1-beta2
not published
6.0.0.1-beta3
Sources updated (all changes from CM-Kernel made until 19.12.2016)
Toolchain updated: GCC 6.2.1 Linaro
6.0.0.1-beta4
Sources updated (LineageOS from 05.01.2017)
6.0.0.1-beta5 and 5.3.0.5-F2FS (CM13.0 version)
Sources updated (LineageOS from 10.01.2017)
Busybox updated to 1.26.2 (thanks to Lord Boeffla)
Kernel logger can be controlled again (below Android logger)
6.0.0.1-beta6
Sources updated (LineageOS from 06.02.2017)
UMS and SELinux fixed (SELinux can be controlled again)
6.0.0.1-beta7
Sources updated (LineageOS from 15.02.2017)
Toolchain updated to Linaro 6.3.1
6.0.0.1-beta8
Sources updated (LineageOS from 07.04.2017)
6.0.0.1-beta9
not published
6.0.0.1-beta10 and 5.3.0.7 (CM13.0 version)
fixed charge levels; now they work fine
internal improvements to extend battery life and to avoid overcharge of the battery
6.0.0.1-beta11 and 5.3.0.8 (CM13.0 version)
Sources updated (LineageOS from 04.06.2017; CM14 kernel only)
Display brightness can be set much lower than on stock kernel now (the display will be almost black on lowest brightness level); but maximum possible brightness stays the same
6.0.0.1-beta12
Sources updated (LineageOS from 21.07.2017)
Toolchain updated to Linaro 7.1.1
Busybox updated (version 1.27.1 compiled by Lord Boeffla)
Display brightness slider fixed
Doze mode switch fixed
6.0.0.1
Same as 6.0.0.1-beta12, but better tested
6.0.0.2
Default governor changed to intelliactive
Default I/O scheduler changed to deadline
Fix for Doze mode switch reworked
Busybox updated (version 1.27.2 compiled by Lord Boeffla)
Toolchain updated to Linaro 7.1.1-2
6.0.0.3
not published
6.0.0.4-Synapse
Sources updated (LineageOS from 19.01.2018)
Synapse support added in addition to Boeffla Config support (Synapse apk can be found in /res/synapse after installing this version of Elite-Boeffla-Kernel)
Default governor changed to pegasusq
6.1.0.1-beta5
Default governor changed back to intelliactive
Battery percentage will show 1% instead of 0% iff battery is fully discharged; it is highly recommended to charge the phone immediately when reching 1%!
Added support for mount namespace separation in order to support Magisk Hide
6.1.0.1
not published
6.1.0.2
fixed the LED driver to properly provide the given settings in Boeffla Config and Synapse
fixed some voltages to get a cooler CPU
Recommended settings from the developer
I'd recommend the following settings to be applied to my kernel:
Battery saving:
Doze enabled
SELinux strict
Governor: conservative or intelliactive
Scheduler: deadline
File system tweaks: both on
CPU maximum freq: 1300MHz
CPU minimum freq: 100MHz
CPU idle mode: AFTR+LPA
CPU voltage: set it as low as it is stable on your phone
GPU frequency profile: 108/160/200/266/350
GPU voltage: set it as low as it is stable on your phone; typically you can undervolt more than 100mV here
Boeffla sound: configure it by yourself until you get the best sound out of it
LED brightness: 40 or less
Touch boost: disabled or 600MHz
Touch wake: disabled
Early suspend: 10ms (default on my CM14.1 kernel)
MDNIE settings: configure it by yourself until you get the best out of it
Touch key LED: same as MDNIE settings
AC charge current: 2000mA
USB charge current: 500mA
Wireless charge current: 1000mA
Swappiness: no overwrite
Low memory killer: default values
System tweaks: off
zRam: off
TCP congestion: default
Entropy settings: default
Android logger: off; except for debugging
Kernel logger: on
Performance:
Doze enabled
SELinux strict
Governor: intelliactive or ondemand
Scheduler: deadline
File system tweaks: both on
CPU maximum freq: set this as high as it is stable on your phone
CPU minimum freq: 100MHz
CPU idle mode: Idle only
CPU voltage: set it as low as it is stable on your phone
GPU frequency profile: choose either a profile or overclock manually; you can set this as high as it is stable on your phone
GPU voltage: set it as low as it is stable on your phone
Boeffla sound: configure it by yourself until you get the best sound out of it
LED brightness: 0 to 255; choose it as you like it
Touch boost: 1300MHz or 800MHz
Touch wake: can be enabled if you want this feature
Early suspend: 10ms (default on my CM14.1 kernel)
MDNIE settings: configure it by yourself until you get the best out of it
Touch key LED: same as MDNIE settings
AC charge current: 2000mA
USB charge current: 500mA
Wireless charge current: 1000mA
Swappiness: set it as you like it
Low memory killer: default values
System tweaks: off
zRam: set it as you like it
TCP congestion: default
Entropy settings: default
Android logger: off; except for debugging
Kernel logger: on
For a combination of performance and battery saving you can either combine these two profiles or leave the default settings of my kernel. If you don't know what a specific setting does I'd recommend you to leave the default value that came with my kernel.
Could You make the CM11 Version please
It's already finished, but you have to compile it by yourself because I never published any zips of the CM11 version: https://github.com/Oebbler/elite-boeffla-kernel-cm11.0-i9300
The instructions on how to compile it can be found below the source tree (on top of the readme file).
If you have troubles compiling it please write to me.
@Oebbler1 Thank You so much for your efforts I am going to try it Thanks for keeping updated our S-3 :good:
Is it safe to overclock that much? And can you post best configuration for this kernel, in your opinion?
Thanks
Pls compile it-cm11.thanks in advance
It is the wonderful kernel. It is really safe because when I too overclocked my phone and it was unstable so I used the normal boeffla kernel and after used the elite kernel again. The kernel cooperate with crdroid v1.5 on my phone. I am really delighted that this phone has 100 mhz frequency cpu and 1500 mhz frequency cpu and more powerful charging. This phone by persons like you is brilliant even today. Thanks for your hard-working.
I think 2 ghz is too high lol my device is direcly crashing
But the 100 mhz underclock rocks:good:
djedjy said:
Is it safe to overclock that much? And can you post best configuration for this kernel, in your opinion?
Thanks
Click to expand...
Click to collapse
It is safe as long as you don't overvolt above 1500mV. I'll post my recommendation about the config tomorrow.
Can i flash it on top of boeffla kernel?
Sent from my GT-I9300 using Tapatalk
judoskido said:
Pls compile it-cm11.thanks in advance
Click to expand...
Click to collapse
I'll do that tomorrow. Due to the success of this kernel I'll also publish my builds for CM12.1 and CM13.0
sleeper994 said:
Can i flash it on top of boeffla kernel?
Click to expand...
Click to collapse
You can, but I'd recommend you to flash the "boeffla-config-reset-v4.zip" afterwards.
My question is where do I download it?
jesus693 said:
My question is where do I download it?
Click to expand...
Click to collapse
From Here
http://forum.xda-developers.com/devdb/project/dl/?id=22353
Yes, but I'll publish new versions in the future. Every published build of my kernel can be downloaded in the "Download" section of this thread. There's an icon below the title of the whole thread that says "Download". If you click there you can download every build of my kernel.
I installed it but I have a lot of restarts with aicp 12.1, thank you good job !!
You experience these reboots because my CM12.1-kernel includes the ramdisk for CM12.1 only and doesn't support the anykernel method Boeffla and I are using since CM13.0. I'd recommend you to upgrade as soon as possible to an Android 6.0-based ROM because most Android 5.x-based ROMs don't work well on the Galaxy S3.
Thank you for your feedback!
Oebbler1 said:
You experience these reboots because my CM12.1-kernel includes the ramdisk for CM12.1 only and doesn't support the anykernel method Boeffla and I are using since CM13.0. I'd recommend you to upgrade as soon as possible to an Android 6.0-based ROM because most Android 5.x-based ROMs don't work well on the Galaxy S3.
Thank you for your feedback!
Click to expand...
Click to collapse
Firstly Thanxxx Alot for your Great work.......ðŸ˜ðŸ˜
And
On Cm 14.1 now Lineage .....
M also facing restarts when i over clock CPU more than 1600 MHz🤔🤔🤔.......
Sent from my GT-I9300 using Tapatalk
Quanta kernel fork with LineageOS changes and SINAI-N4 optimizations
Known-issues
HTML:
- To be filled
Changes and differences from the original
HTML:
COMPILED WITH CUSTOM TOOLCHAIN "QUVNTNM-TC" Linaro 6.4 with Cortex-A15 optimizations and neon/float-abi=hard
LineageOS changes
SDCARDFS
Some optimizations
MSM_SLEEPER
Wakelocks toggler
GPU minimum frequency is 27 MHz
Simple GPU Governor
RWSEM Optimized
Writeback & ext4 updates
Slimbus updates & overclock
GPU Overclock
Intellimm governor
XZ Compression
Maple IOSched
Many tweaks from SINAI-N4
IntelliThermal
Installation:
1. Wipe cache/dalvik cache
2. Flash kernel zip over stock kernel of the ROM
3. Reboot system
Credits:
Special thanks to
- AOSP
- BasketBuild
- frap129
- Chipp_a
- AdrianDC
- zaclimon
- spezi77
- hellsgod
- rostifaner
- ganachoco
- txuki2005
- yoinx
- Cl3Kener
- franciscofranco
- faux123
- eng.stk
- stratosk
- show-p1984
- mrg666
- Defconoi
- neobuddy89
- flar2
- CallMeAldy
- AK
- Alucard
- And anyone I forgot
Download links:
Nougat AOSP BASED: BasketBuild
Nougat CM/LOS BASED: BasketBuild
XDA:DevDB Information
Quanta kernel fork for Nexus 4, Kernel for the Google Nexus 4
Contributors
sudokamikaze, Faux123, franciscofranco, spezi77, zaclimon
Source Code: https://github.com/Sudokamikaze/Quanta-Reborn
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V2.3
Stable Release Date: 2017-07-17
Created 2017-07-17
Last Updated 2017-12-26
If you want/don't want *feature name* just reply this msg with *feature name* and problems/ideas with it
Booted normal. I cleared KA stored settings.
Now:
CPU - No changing. Default in interactive.
Hotplug - No changing. Default in mako-hotplug. No other hotplugs.
-- Before the kernel becomes stable, I think there's no need to add more features. You could also do major work in SINAI-N4.
-- once booted into launch, KA show Max frequency 1240MHz, after a few minutes it restored to 1512MHz, normal. 4 cores actived.
--dt2w - worked.
-- Thermal - it's simple, I like it~
--IO scheduler - I changed it to noop. Others no changing.
--Anything else no changing.
--Camera OK, 1080P video recording OK.
Today I will keep monitoring the logcat file to PC.
Thanks for your great work! BTW, you did so fast.
dcshallot said:
Booted normal. I cleared KA stored settings.
Now:
CPU - No changing. Default in interactive.
Hotplug - No changing. Default in mako-hotplug. No other hotplugs.
-- Before the kernel becomes stable, I think there's no need to add more features. You could also do major work in SINAI-N4.
-- once booted into launch, KA show Max frequency 1240MHz, after a few minutes it restored to 1512MHz, normal. 4 cores actived.
--dt2w - worked.
-- Thermal - it's simple, I like it~
--IO scheduler - I changed it to noop. Others no changing.
--Anything else no changing.
--Camera OK, 1080P video recording OK.
Today I will keep monitoring the logcat file to PC.
Thanks for your great work! BTW, you did so fast.
Click to expand...
Click to collapse
You writes to me to not modify governors/scheds
And I didn't touched it, mako hotplug is default in Quanta, I merged only optimizations, sdcardfs and other
I don't touch hotplug driver because it may cause music lags.
I add zen and other schedulers
What governors do you want to see?
sudokamikaze said:
You writes to me to not modify governors/scheds
And I didn't touched it, mako hotplug is default in Quanta, I merged only optimizations, sdcardfs and other
I don't touch hotplug driver because it may cause music lags.
I add zen and other schedulers
What governors do you want to see?
Click to expand...
Click to collapse
By now, no reboot. And I have to join a meeting now... Governors are not so much important to me. We can see how nice the kernel will be.
I think the wakelock can be optimized.
sudokamikaze said:
You writes to me to not modify governors/scheds
And I didn't touched it, mako hotplug is default in Quanta, I merged only optimizations, sdcardfs and other
I don't touch hotplug driver because it may cause music lags.
I add zen and other schedulers
What governors do you want to see?
Click to expand...
Click to collapse
I personally would like to bfq added, if it hadn't already.
And what is the current battery life on Quanta-Reborn?
moriel5 said:
I personally would like to bfq added, if it hadn't already.
And what is the current battery life on Quanta-Reborn?
Click to expand...
Click to collapse
About battery, you can see my screenshot upstairs.
A first random reboot, but it's still more stable than the other kernel.
I was in charging and playing coc.
dcshallot said:
A first random reboot, but it's still more stable than the other kernel.
I was in charging and playing coc.
Click to expand...
Click to collapse
Charging and playing may cause overhead
With this kernel you may use a Kernel Adiutor from GooglePlay
dcshallot said:
About battery, you can see my screenshot upstairs.
Click to expand...
Click to collapse
It looks fine, however what is your average SOT?
Mine will probably be slightly longer, as I do not utilize Google's Play Services, nor do I play games (and I limit the CPU's frequency, so it does not overheat).
moriel5 said:
It looks fine, however what is your average SOT?
Mine will probably be slightly longer, as I do not utilize Google's Play Services, nor do I play games (and I limit the CPU's frequency, so it does not overheat).
Click to expand...
Click to collapse
Sot?
Everything installed. No self reboot.
Now I want to come back lineage OS........
dcshallot said:
Sot?
Click to expand...
Click to collapse
Screen on time check it by going to settings battery then click screen it will tell you how long your screen has been on since last full charge
---------- Post added at 12:28 AM ---------- Previous post was at 12:23 AM ----------
sudokamikaze said:
If you want/don't want *feature name* just reply this msg with *feature name* and problems/ideas with it
Click to expand...
Click to collapse
Quantum kernel or quanta reborn both are fine by me
[email protected] said:
Screen on time check it by going to settings battery then click screen it will tell you how long your screen has been on since last full charge
Click to expand...
Click to collapse
I'm still connecting the cable. I'll upload a series of screenshot after a few hours.
Reboot.
I received an SMS message.
Double tap to wake.
Drag on lock screen to preview the message.
I was going to slice away the message, and it rebooted.
dcshallot said:
Reboot.
I received an SMS message.
Double tap to wake.
Drag on lock screen to preview the message.
I was going to slice away the message, and it rebooted.
Click to expand...
Click to collapse
After the random reboot, it lost a few hours' record.
I just flashed LOS... But, it can't boot into launcher. Keep loading the booting animation. Sometimes I just consider maybe I should not use f2fs.
UPDATE: I converted /data and /cache back to ext4. Succed to boot into launcher. Hope it work well as old quanta.
In LOS, please disable default mako-hotplug. I see mpdecision enabled by default. If mako-hotplug disabled by default, ignore my question.
UPDATE: When I was restoring apps+datas, it rebooted, I thought it cause by double-hotplug. No logs, because I'm still reboot to applying settings.
LOS: 1080P video recording normal.
Custom Kernel for S7 and S7 Edge to be used with AOSP roms (Lineage OS, Havoc OS, any other 8.1 or 9.0 rom)
FEATURES
AMOLED PWM Flicker-Free fix (selectable via MTweaks)
WireGuard Support
Added Boeffla Wavelock Blocker
Added Extra Configurable Wavelocks
Added CPU Governors
Added CPU Voltage and Frequency Control
Added Dynamic Fsync
Added Frandom Support
Added GPU Voltage and Frequency Control
Added IO Schedulers
Added Insecure ADB
Added Powersuspend
Added UKSM
Disabled KNOX
Enabled 4 Cores can reach highest CPU frequency
Enabled IP_NF_TARGET_TTL
Enabled LZ4 support
Increase Battery Charging Levels (USB Standard = 900, USB Accesory charger = 900, MHL USB =660)
Software toggle for CRC via MTweaks app
Audio Gain control via MTweaks app
AMOLED PWM FLICKER-FREE INFO: XDA Thread
WIREGUARD INFO: XDA THREAD
list of included CPU Governors
alucard - barry_allen - bioshock - blu_active - cafactive - conservative - cultivation - dancedance - darkness - electrodemand - elementalx - HYPER -
impulse - intelliactive - intellidemand - intellimm - interactive - ironactive - lionheart - nightmare - ondemand - ondemandplus - ondemand_x -
pegasusq - performance - powersave - relaxed - smartass2 - smartmax - smartmax_eps - userspace - wheatley - yankactive - zzmoove
list of included IO Schedulers
bfq -fifo - fiops - row - sio - sioplus - tripndroid - vr - zen - maple
VARIANTS SUPPORTED
G930F
G930FD
G930K
G930L
G930S
G930W8
G935F
G935FD
G935K
G935L
G935S
G935W8
KERNEL INFORMATION
Built with: Google GCC 4.9 Toolchain
Linux Version: 3.18.137
DOWNLOADS
FLAT
EDGE
CREDITS + THANKS
Samsung Open Source Release Center for the Samsung Source code
Linux Kernel Archives for the Linux Source code
Tkkg1994 for all his help and numerous code samples from his source
osm0sis for Android Image Kitchen and AnyKernel2
jesec for Fingerprint Fix
arter97 for various fixes
lyapota for some Governors and Schedulers
farovitus for his help with mods and commits
morogoku for MTweaks, lots of help, and commits
Noxxxious for his help with mods and commits
Ivan_Meler for porting kernel to AOSP
XDA:DevDB Information
Reflux Kernel, Kernel for the Samsung Galaxy S7 Edge
Contributors
gibranm
Source Code: https://github.com/gibranmather/Reflux
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R13
Stable Release Date: 2019-03-29
Created 2018-09-01
Last Updated 2019-03-29
you have no idea how long I've waited for something like this :laugh::good::fingers-crossed:
[deleted]
0xE2 said:
For some reason the added frequencies for the CPU don't show up in MTweaks for me
Click to expand...
Click to collapse
Same, also the battery drains quite a bit quicker than stock
[deleted]
0xE2 said:
Not for me, also a kernel won't have that much of an impact on battery life. There must be something else going on.
Click to expand...
Click to collapse
What frequencies are missing?
Here's a screenshot from my mtweaks.
Ah my bad these featured haven't compiled properly. Will be there in next build
sambow23 said:
Same, also the battery drains quite a bit quicker than stock
Click to expand...
Click to collapse
When flashing kernel, do a wipe of cache and dalvik.
And only use on aosp 8.1 roms
gibranm said:
When flashing kernel, do a wipe of cache and dalvik.
And only use on aosp 8.1 roms
Click to expand...
Click to collapse
After clearing the Dalvik/cache, my device is constantly warm. I've set low frequencies on the big and little cores with the interactive governor.
Using RR 6.1.0 if that helps
sambow23 said:
After clearing the Dalvik/cache, my device is constantly warm. I've set low frequencies on the big and little cores with the interactive governor.
Using RR 6.1.0 if that helps
Click to expand...
Click to collapse
Which rr 6.1 build?
New Build [R2]
Changelog:
Added Cafactive CPU Governor
Added Cultivation CPU Governor
Added ElementalX CPU Governor
Added Wheatley CPU Governor
Added UKSM (Ultra Kernel Samepage Merging )
FLAT
EDGE
gibranm said:
Changelog:
Added Cafactive CPU Governor
Added Cultivation CPU Governor
Added ElementalX CPU Governor
Added Wheatley CPU Governor
Added UKSM (Ultra Kernel Samepage Merging )
FLAT
EDGE
Click to expand...
Click to collapse
Would be nice if you can add the "Most up to date guide on CPU governors, I/O schedulers" thread's link in your OP. Just in case the users start asking, which is the best gov, schedule, best combo, blah, blah, blah. The usual in a kernel thread, you know. Thanks once more for the kernel. Time to try the new R2.
gibranm said:
Which rr 6.1 build?
Click to expand...
Click to collapse
RR-O-v6.1.0-20180824-hero2lte
sambow23 said:
RR-O-v6.1.0-20180824-hero2lte
Click to expand...
Click to collapse
Hmmmmmmm try flashing the new build. Wipe cache and dalvik and then flash kernel. To be safe uninstall magisk or root before flashing kernel
mauam said:
Would be nice if you can add the "Most up to date guide on CPU governors, I/O schedulers" thread's link in your OP. Just in case the users start asking, which is the best gov, schedule, best combo, blah, blah, blah. The usual in a kernel thread, you know. Thanks once more for the kernel. Time to try the new R2.
Click to expand...
Click to collapse
Thanks. That's a good idea. I'll add it later
[deleted]
0xE2 said:
I hope you'll address the frequency issues in R3, because otherwise I can't complain
Click to expand...
Click to collapse
What issue?
for future builds can u plz add an option to increase sound using kernel auditor ....(if possible)... this is the only reason i cant really stay on aosp roms the volume is really low
Tarique435 said:
for future builds can u plz add an option to increase sound using kernel auditor ....(if possible)... this is the only reason i cant really stay on aosp roms the volume is really low
Click to expand...
Click to collapse
For now you can use sound mods to achieve that. I am looking into adjusting headphone gain
[deleted]
"A kernel is the central part of an operating system. It manages the operations of the computer and the hardware - most notably memory and CPU."
It should be installed via Recovery (TWRP) over any LOS/AOSP 14/15/16/17-Based ROM. It doesn't need any tweaking with any app, just install it and use it.
BUT you can use Boeffla Config app (available here on the next post) or Kernel Adiutor if you like tweaking.
This kernel uses codes from other kernels, as you'd expect in an open-source community, most notably code from Boeffla, SmartPack, Lolz, Ares and Intelli-kernel
It has UNIQUE features like:
- a different "low memory killer" algorithm wrote by me. Extremely simple, but multiple apps can be killed in a batch!
- zcache is disabled for really *freeing* up memory that was used for caching files
- a different default cpu hotplugger. ALL kernels (even LOS/stock) relies on Qualcomm's vanilla MPDecision, I wrote my own
- Tuned CPU governor (it's the default). It's basically the Interactive governor but with a LOT of tuning to match up with the tuned hotplugger. Did you know stock/los roms uses a multi-socket Interactive governor that doesn't match our phone's cpu?
- many many many MANY compiler optimizations not found on boeffla kernel, LOS or anywhere else!
- MANY unused code simply REMOVED to free memory and CPU. People ADD a lot of stuff on a kernel, I like to remove
- compiled with 2019 GCC version 9.1 (instead of the ancient version 4.9 that EVERY ROM uses)
- Your battery will be charged to "real" 100% like TWRP does
- many unstable cpu and gpu governors and i/o schedulers removed. they only wasted space
- ext4 tweaks
- fair scheduler tweaks
- removed 3 touch boosters code.. why so many? just to raise your clock on every single touch?
- Maple i/o scheduler
- lowered "read ahead" of files and inodes.. why would you read something you don't know you'll need?
- lowered maximum i/o requests for lowering ram usage while writing to SD (internal or external)
- removed a lot of DEBUG code.. why release a software with debugging code built-in?
- removed network protocols we would never use
- removed some compatibility code
- removed dynamic fsync, why would anyone want to enable fsync in any moment anyway? it has been disabled by default linux kernel for decades!!
- decreased commit DELAY of file changes from 20s to 5s, which is linux default. there's no advantage in keeping new/modified data on ram for too long
And common features:
- Max cpu voltage set to 1.4v
- Min cpu clock set to 268mhz instead of 300
- Max cpu clock set to 2995mhz instead of 2457
- Max gpu clock set to 657mhz
- Compiled to speed, not size
- Voltage table for undervolting or overvolting
- Charging level for AC, USB and Wireless charger can be set
- LED fading control + brightness
- zen, noop bfq and sioplus i/o governors
Overall your phone will be snappier, and less battery hungry
You can go back to your rom's default kernel by simply installing rom's .zip again. No need to wipe anything ever!
Telegram Group: https://t.me/tunedkernel
If your voice on recordings or whatsapp calls is too LOW, try my fix for that: CLICK
XDA:DevDB Information
TUNED, a LOS Kernel for S5 - Performance and Battery life together!, ROM for the Samsung Galaxy S5
Contributors
fbs
ROM OS Version: Android 10
Version Information
Status: Stable
Stable Release Date: 2020-10-21
Created 2019-01-28
Last Updated 2020-10-23
Tuned Kernel versions will be attached here, the build date is at the file name.
com.ktoonsez.KTmonitor.1.apk is a little app that will show to you each cpu core clock and gpu clock. Please hold the red button and put at most 100 at "Update Speed". Don't touch the other options because they're buggy!
2.5.20-boeffla-config-v2.apk is the Boeffla Config App, where you can setup most of this kernel's options
klte = SM-G900F, SM-G900M, SM-G900R4, SM-G900R7, SM-G900T, SM-G900V, SM-G900W8, SM-S902L
klteduos = SM-G900FD, SM-G900MD
kltedv = SM-G900I, SM-G900P
kltekor = SM-G900K, SM-G900L, SM-G900S
kltechn = SM-G9006V
CLICK ON THE LINK BELOW WITH YOUR MODEL ON ITS NAME (KLTE or KLTEDUOS or KLTEDV or KLTEKDI or KLTEKOR or KLTECHN) TO DOWNLOAD:
Reserved
300119
- possible fix for encrypted devices and f2fs file system (f2fs is buggy on every s5 kernel, don't use this)
150219
- more overclocking on cpu and gpu
- sdfat updated
- tuned hot plugger enhanced
- xor and square root algorithms optimized for ARM
- boot time maybe a little faster with LZ4 compression (that's why kernel seems bigger)
- removed "read-ahead" code from kernel, don't bother changing read_ahead_kb because it won't work
- zcache (not zswap/zram) back on for now
170219
- 266mhz undervoltable again.
- f2fs removed for now
- ext4 read_ahead blks reduced but not eliminated
200219
- tweaks to zcache. still don't know if it's better with it on or off..
- tuned hotplugger will enable a core and put it on maximum freq right away!
- removed CPUBW_HWMON gpu governor
- tweaks to uv_oc table
220219
- compiling with march=armv7-a mtune=cortex-a15
070319
- linux 'fair' scheduler tuning
- zcache disabled
- more inlining while compiling
100319
- more tuning on linux cpu fair scheduler and tuned governor
- revised all kernel configs (klte and variants)
260319
- smooth screen animations
- new f2fs version
- maple scheduler tuned
- compiled with -funroll-loops but less function inlining
030419
- f2fs should be working now
- new assembly optimizations
150519
- boeffla app should work better now when changing cpu hotpluggers and charging voltages
- some governors are back
- using "system_freezable_power_efficient_wq" for disk events
- RoW and Maple schedulers tweaked
- ext4 tweaks
- fair scheduler tweaks
070619
- GCC 9.1 (2019 compiler and toolchains)
- Compiling with -fgraphite -fgraphite-identity -fschedule-fusion -ftree-lrs
- tuned hotplugger with different algorithm
110619
- number of online cores are now working on boeffla app
- boeffla app can raise input charger amperage to 2200
- minor gpu tweaks
200719
- Tuned governor and hotplugger tweaked
- Saving more battery when suspended
- Merging sd reads/writes by default
090819
- tuned governor tweaked
- defaulting to row i/o scheduler, even though benchmarks don't like it
- defaulting to "simple_ondemand" gpu governor, tweaked it a lot
100919
- back to xz compressed kernel image
- updates from upstream los16
- same kernel for los14 or 16. thanx Samuel Pascua
- some strncpys changed to memcpys
- tuned governor at 15ms frequency
221019
- updates from upstream los16
- rewrote tuned hotplugger: using even less cpu for itself but enabling cores more often, starting from core 4 instead of 2
- ZRAM enabled with lz4 compression but swappiness at 60% only
- made 1497mhz the default high load speed
- tuned governor at 10ms frequency
101119
- zram changed to vnswap but lower swappiness to save battery
- no more flicker when low brightness (thanks to samuel pascua)
- file system tweaks
201119
- f2fs code stolen from intelli-kernel
- file system tweaks
- default vm_swappiness to 25
170120
- GCC 9.2.1 MUSL 2019-12
- boot time reduced even more
- faster overall performance, lower overall battery drainage
- KTmonitor should show CPU Temperature now
- vnswap should work on Pie
- enforcing selinux after booting
- removed adreno input booster
- set sysctl_vfs_cache_pressure to 50 and vm_swappiness to 40
- ignoring zswap_max_pool_pages
040220
- Working on Q (Android 10)
- AnyKernel update to 3
- Tuned governor with min_sample_time defaulting to 80ms
- Charging till your battery gives 4.4v, or explodes
- UV/OV table matching scaling_frequencies
20200223
- Using higher l2-cache frequencies for performance
- Higher heat "tolerance"
- Battery voltage/power should now be showing correctly at lockscreen
- vnswap wasn't working on Pie but now it is
20200521
- Changed some timers to let the device sleep more (huge battery gain on stand by)
- Tuned governor now being more conservative
- Added back IO Schedulers
- Led control
- LOS updates
- Remove Adreno touch booster
thank you for great work
Thank you very much.
why a new thread?! and also the download link is missing.^^
Where's the download link, appears to be missing.
xda is completely ****ed up
Thanks a lot for your work! But where do I get this kernel?
I've just upload a new version for klte only for now. TEST with los15.1 and 16 please.. and see if boeffla config app is still working with it..
and please don't flood this thread about the variants
fbs said:
I've just upload a new version for klte only for now. TEST with los15.1 and 16 please.. and see if boeffla config app is still working with it..
and please don't flood this thread about the variants
Click to expand...
Click to collapse
thnx for this kernel ,can't download this kernel
warism100 said:
thnx for this kernel ,can't download this kernel
Click to expand...
Click to collapse
I couldn't download using XDA app, but I was able too by opening XDA desktop site using browser.
I hope this helps you.
Thank you I will try it.
g900w8 9.0 no working
I have installed this kernel for my S5 G900F
with latest lineageos 15.1 and i insttaled beoffla
apk too, the results is great , beoffla apps work
as before
LOS15.1 + kernel + beoffla apk work fine
vlad3647 said:
g900w8 9.0 no working
Click to expand...
Click to collapse
w8 isn't klte
Uff i didnt know ,could you please tell which is w8?
Thanks
vlad3647 said:
Uff i didnt know ,could you please tell which is w8?
Thanks
Click to expand...
Click to collapse
hum.. you were right, it is klte indeed.. did it work with previous tuned-klte version ?!
I used before smartpack
---------- Post added 30-01-2019 at 12:03 AM ---------- Previous post was 29-01-2019 at 11:59 PM ----------
Maybe bcx muy phone is pretty old
---------- Post added at 12:36 AM ---------- Previous post was at 12:03 AM ----------
I install this one and so far so good
Kernel Special Features: lighter, optimization-focused
Version Information
Status: Stable
Stable Release Date: 2018-08-22
Hi, fbs.
g900f (klte) on los 15.1
not worked on f2fs