View attachment 3520027
IMPORTANT: I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you. .They are warned.
Ok lets go.
Links of files needed:
Note: I recomended not update the camera because have a bug. stay with the initial apk camera. (v2.1 solved of the problem for the camera.
-is for XCU.
https://mega.nz/#!kF1QiRxQ!YmoLHuKx3Wqjm9DGF1BxwS5IxcsupOUJ_F9OkwytnX0v2
https://mega.nz/#!sZETyCwC!aLeX4P00oSAjbSSxAm_TQ5Pj9QZCs8jGZU-A32a1taAv2.1
-is for XXU.. Not tested for me. test for your risk.
https://mega.nz/#!IA82wKpL!ru6QM3Q26UQbgzw6qxB79DTL_FudEszT5LPP7lSJwfov2
https://mega.nz/#!0Q0GUaaC!yDvXEnM-YBl7fFRyP33r113gu9N5_lfPNaccRMz6HSAv2.1
Ohter patchs work for XXU and XCU.
https://mega.nz/#!NZ8XWaaY!KLgTkILMu17RJGvcMydkuFC7CxOrNmTV56UXePuhCew ---> is a toogle flashligh. Is your choise install.
https://mega.nz/#!ZIFRnAIZ!wkB4B7drtLB_7MrZS4KK9JnCWigAe-ibT6LJk5zCYE8 ---> is a some libs of equalizer. Necesary.
Installation steps:
-Put the files in a sdcard
-In on recovery.
-Wipe data factory reset.
-Advance wipe check all, less sdcard and wipe.
-go to install and seach Prime Chosen v2
-rebot the phone when finish the installation.
-when the phone starts complete the configuration and go to recovery.
-And install the others zips if you like. without wipes.
And this is all. I hope to like you and i hope to have a more updates to optimize the rom. And sorry for my bad english but i talk spanish. Give me a thnx in the post. :good:
And if you wish to support me not dude in make a donation the quantity is not important. Look below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you like my job not dudes to help me. :good:
some screenshots:
Changelog:
Changelog:
v1:
-More recepcion of wifi and signal
-best reponse of video streams
-best quality of audio
-best administration of ram
-power battery save
-Deodexed
-rooted.
v2:
-more power in a game
-Video aceleration
-best resolution to view images
-Best response of touchscreen.
-More fast
-Add busybox
-Add suppuport data
-remove knox.
-3G Speed
-Smoother experience
-More battery duration.
-Better call voice
-Qualcomm Tweaks
-Change some apps to android M or cm12
-Change icons
-Change systemUI
-Change framework
-Update Launcher.
- I dont remember what more.
v2.1:
-Return to stock camera. Some people not like the camera and have a bug.
- Return to stock launcher maybe fix the stopped of put a wallpaper.
Si no entiendes los pasos a seguir aqui hay un video donde explico como hacerlo por completo:
https://www.youtube.com/watch?v=_h1GO-Jhzvo
El primer inicio durara como 15 minutos es por que es deodexeada y esta abriendo las aplicaciones ya despues iniciara normalmente.
Stock apks like a camera and launcher. and how to fix the wifi. All in the rar.
Link: https://mega.nz/#!0NVAFYTD!fL_vHtslZSvfj01uBMzdzBKbz-C1vWCkLOzeGN8yMFE
How to install wifi:
1- Download odin v 3.09 or high.
2- extract the files Módem.bim and NON-HLOS.
3- connect the cell phone in download mode.
4- Put in CP the modem.bin flash and restar the phone.
5- turn on the phone and put on download mode again.
6-select the NON-HLOS in CP and flash and restart the phone.
When you finish the wifi is fixed. :good:
Here is the fix wifi in xxu use the steps of up..
https://mega.nz/#!sZkg2bwA!YemjL_TMAwbeQcQWO2fcU_o-fTLspjgQsENjiDQMJVM
-If the first fix not solve the problem only install the clean firmware:
Steps For XXU:
- Clear al data if need back up you make now..
- Download this firmware:
http://www.sammobile.com/firmwares/download/70500/G530HXXU2BPB2_G530HSER2BPB2_SER/
-Install the firmware and instaol the twrp and install the rom for xxu.. and the wifi work...
Steps For XCU:
- Clear al data if need back up you make now..
- Download this firmware:
http://www.sammobile.com/firmwares/download/72910/G530HXCU1BPE4_G530HSER1BPB1_SER/
-Install the firmware and instaol the twrp and install the rom for xxu.. and the wifi work...
for xcu or xxu or both ?
mohamedbk said:
for xcu or xxu or both ?
Click to expand...
Click to collapse
I am test only for xcu..
it's for xcu only i don't think if it work for xxu
mohamedbk said:
it's for xcu only i don't think if it work for xxu
Click to expand...
Click to collapse
I dont know.. maybe.. the maximum damage it can cause is a infinite blootop
@chuzpz can you find any bug? All works perfect?
cachok9999 said:
@chuzpz can you find any bug? All works perfect?
Click to expand...
Click to collapse
No. any bug all works perfect
What did you do to creat your rom from stock rom?
chiennv19 said:
What did you do to creat your rom from stock rom?
Click to expand...
Click to collapse
???? I dont not. Maybe use a stock rom from sammobile.. and a kitchen
bugs on video recorder not working
chuzpz said:
View attachment 3520027
Hi Guys. Is a great day or nig...C!pCeg3U9J4aYbJb0XrUBtbdi2QLhoQfTRs27l96sPyiE
Apollo (best music player for me):
https://mega.nz/#!5EV2TIQL!jfhz_NMdjaPbRC07kH1m0KgsfOen1U7ihI0h3MF7Xfw
And this is all i hope to like you and i hope to have a more updates to optimize the rom. And sorry for my bad english but i talk spanish. Give me a thnx in the post. :good:
Click to expand...
Click to collapse
video recorder is not working, maybe you did not notice it going to camera apps then select icon for video then you will find out that its not functioning anymore...
redskin08 said:
video recorder is not working, maybe you did not notice it going to camera apps then select icon for video then you will find out that its not functioning anymore...
Click to expand...
Click to collapse
The video recorder is work fine for me.. you follow the steps and erase the data of the rom (wipe cache, data, etc...)
WIFI not working
I did the procedure (post number 2), the only difference being that did not have a SIM CHIP inside.
I was on 4.4., and went straight to the post number 2 procedure.
please, help
chuzpz said:
2- turn on your cell until your boss sim
Click to expand...
Click to collapse
boss sim??? what do you mean by this? please clarify.
4- download and install the TWRP Recovery (http://www.4shared.com/file/XQAlhoclce/TWRP-SMG530H.html?)
Click to expand...
Click to collapse
How to install TWRP Recovery? Please help.
Desmios said:
I did the procedure (post number 2), the only difference being that did not have a SIM CHIP inside.
I was on 4.4., and went straight to the post number 2 procedure.
please, help
Click to expand...
Click to collapse
if you not use the rom stock before to flash the prime chosen the wifi not work. I write the steps for this.. The rom stock to work the wifi is in the post.. :-/ read all the post and follow all the instruction..
And if you understand spanish i create this video to easy way to flash my rom:
https://www.youtube.com/watch?v=_h1GO-Jhzvo
virtualyasir said:
boss sim??? what do you mean by this? please clarify.
How to install TWRP Recovery? Please help.
Click to expand...
Click to collapse
install the recovery with odin..
WiFi NOT Working
chuzpz said:
Steps to install the rom:
1- download and install this firmware http://www.sammobile.com/firmwares/download/55362/G530HXCU1BOH3_G530HOXE1BOI1_CAU/
2- turn on your cell until your boss sim
3- turn off
4- download and install the TWRP Recovery (http://www.4shared.com/file/XQAlhoclce/TWRP-SMG530H.html?)
5-put the Prime chosen rom in your sd card
6- wipe data factory reset
7-advenced wipes wipe data,system,cache,dalvik and internal storage
8- install the rom
9- reboot system now.
Click to expand...
Click to collapse
Dear. I did everything correct but WiFi is NOT working. Please help
virtualyasir said:
Dear. I did everything correct but WiFi is NOT working. Please help
Click to expand...
Click to collapse
Ok frist your check your cell is variant or baseband XCU.
Are your sure for this?
And the second your speak spanish?
virtualyasir said:
Dear. I did everything correct but WiFi is NOT working. Please help
Click to expand...
Click to collapse
Thus CORRECTING
Goto your stock rom and then browse to the system folder
Then go to system/lib/modules/prima/prima_wlan.ko
Copy it some where safe
Then install the deodexed rom
After full install
Rename the prima_wlan.ko to wlan.ko
After renaming copy the file to system/lib/modules
SORRY THE ENGLISH!
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Muchachada Well, here's another contribution more, now ICS MIUI for optimus black version Ultrasound. The truth is that it is in a beta phase, it remains to give a little more, but good thing if we can serve. Very nice aesthetically, as all MIUI. Try it and you know let us know how it goes.
here I leave the second version of MIUI Ultrasound, I hope you enjoy it.
Yet to be done but as long the work harder.
Alpha 1
1) Based on MIUI Galaxy SL (Thanks to The Frankestain)
2) Built from CM9 nightly 6 and Ultrasound v3
3) Added tweaks of Ultrasound
4) Fixed Audio
5) Small Changes in Buil.prop
Characteristics V2
1) Fixed RAM consumption
2) Added new libraries Audio
3) Fixed energy consumption
4) Optimized framework
5) Optimized services.jar
6) Updated camera libraries (Thanks BPaul)
7) Fixed reset in Settings > Storage
What works?
1) Themes
2) Music
3) Gallery
4) Wifi
5) Bluethoot
6) USB Storage
8) Posts
9) Phone
10) Browser
Click to expand...
Click to collapse
What does not work?
1) The application LBESEC_MIUI.apk (SuperUser) To have SuperUser flash this in CMW without wipes and you will SuperSU
2) The camera
3) The app Flashlight
4) Share Wifi
Click to expand...
Click to collapse
Notable errors
1) You may not have always to start network signal, if your name appears operator, but not the signal, To fix this you should go to: Settings> Mobile networks> Network operators> Select automatically> (Now uncheck)> Next> OK> Cancel. This we must always perform to turn off, turn on, restart the phone and have no signal.
Click to expand...
Click to collapse
2) You may install any application to leave a message with the following error: Unfortunately, Jinshan Security Guard has stopped or has stopped Provider Unfortunately Guard. Typically resolves after applying SuperSU and give root permissions to Guard Provider and Permits.
Click to expand...
Click to collapse
I'll be updating the ROM as you add improvements
I want to thank my sponsor infinitely Ocovar112, He guided me and helped me a lot to make this possible, Thanks also go for!
To download click the cubes, one is the ROM and the GAPPS other
Installation:
1) Download the ROM, GAPPS, and SUPERSU
2) Get them on your SD card
3) Reboot on CMW
4) Full wipe / cache
5) Apply MIUI ULTRASOUND.zip
6) Apply miuiapps.zip
7) Apply CWM-SuperSU-v0.94.zip
8) Restart
Click to expand...
Click to collapse
To have USB storage mode active USB debugging in Settings> Developer Options
V2:
MIUI V2
Apps MIUI V2
Wait for my third version 4.1.1
Do I need to flash gapps?
Thanks!
I'll try soon
I'm sure a great job again are off.
nhanzes said:
Do I need to flash gapps?
Thanks!
Click to expand...
Click to collapse
if it is necessary to avoid further problems, follow the steps, luck
772 views and only 3 comments? So do not just want to continue providing ...
Good work!!!!!!Blatecktonik
Sent from my LG-P970 using Tapatalk 2
hI
U say in this place HERE "I fixed MIUI V4 is now a ROM for daily use, thanks to the help of OCOVAR112 will be released tomorrow, I thank Frank for his efforts,!!" :laugh: cool, but do u think your last release is without bug and for daily use !
A 2nd MIUI v4..?
Sent from my P-970 using xda app-developers app
I don't see download link
Where is link?
CriminaL / AllegrO said:
I don't see download link
Where is link?
Click to expand...
Click to collapse
The green cube
Sent from my LG-P970 using xda premium
Delete Jinshan. My Chinese mates say it is still buggy.
Sent from my LG Optimus Black using xda premium
did not realize
I think I was out of fashion Links
Why we must install a rom with a lot a bug? All the rom ICS are full of bug and an adapted for daily use especially for who use the phone for work. I'm sure that easily all developers solve the problem very fast, but before this I wouldn't risk, your rom is amazing and my hearth would install but my head say not. Tank so and wait for the next release.
sin project still immature for everyday use but I hope that soon we have a system with MIUI valid thanks
Have PT-BR support or only ENG?
I installed and tried rom
Smooth and fast
is choppy from time to time
usb storage running smoothly
sound quality is very good
I liked the music player and gallery
ram is not bad at work
browser, fast and very nice visuals
Turkish language support is unfortunately not
mobile network does not work
rear camera the same
I hope these problems will soon recover and stable rom
CriminaL / AllegrO said:
I installed and tried rom
Smooth and fast
is choppy from time to time
usb storage running smoothly
sound quality is very good
I liked the music player and gallery
ram is not bad at work
browser, fast and very nice visuals
Turkish language support is unfortunately not
mobile network does not work
rear camera the same
I hope these problems will soon recover and stable rom
Click to expand...
Click to collapse
Hopefull to the next versions!
All of us hope to get dailyuse ROMs without bugs but just on the way to complete!
Thanks to all Devs! try all the best you can lpz!
yuhu...MIUI V4 :laugh:
Gj blatecktonik
doctor1991 said:
Why we must install a rom with a lot a bug? All the rom ICS are full of bug and an adapted for daily use especially for who use the phone for work. I'm sure that easily all developers solve the problem very fast, but before this I wouldn't risk, your rom is amazing and my hearth would install but my head say not. Tank so and wait for the next release.
Click to expand...
Click to collapse
M8 you know that blatecktonik or any developer put a lot of time when develope a rom.Some bugs are the same for all ICS based roms.You aren't forced to install the rom.
And it's Alpha 1.Wait for the vers. that it will make you happy .
genarinho said:
Have PT-BR support or only ENG?
Click to expand...
Click to collapse
No PT-BR support.
nhanzes said:
No PT-BR support.
Click to expand...
Click to collapse
Ok :crying:
Thanks
JuMBO ROM - S4 LTE-A
This ROM is for SHV-E330S/K/L devices (Now supports I9506 also). Which is build from SamMobile original I9506 firmware.
I have tested this on two different E330K devices.This will work on all 3 models of S4 LTE-A Korean variant & I9506 also.
The ROM is a Single CWM flashable zip file. Only the system will be flashed here.
You device should be on stock lollipop for this ROM to work without any issues.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM Info & Features
Based on I9506XXUDOD3
Rooted (SuperSU 2.46)
Deodexed
Deknoxed
Stable & Fast
No Korean bloatware
No SMS Limits
Call recording
Multi-Languages
Clean Dialpad
Network Mode Menu
Few S6 apps
Supported devices
SHV-E330S (SKT)
SHV-E330K (KT)
SHV-E330L (LG U+)
GT-I9506 (International)
Installation Steps - E330SKL
Download & copy the ROM to device storage
Flash CWM recovery via Odin - Download recovery
Reboot into recovery mode
Wipe Data/Factory reset > Clean to install new ROM(* A must)
>> If you're using TWRP or any other CWM recovery you MUST wipe system , data & cache.
Install zip from SD card > Select "JuMBO v1.0 - E330SKL.zip"
Wait until installation completes.
Reboot after everything finished.
Installation Steps - I9506
Download & copy the ROM to device storage
Flash CWM recovery via Odin - Download recovery
Reboot into recovery mode
Wipe Data/Factory reset > Clean to install new ROM(* A must)
>> If you're using TWRP or any other CWM recovery you MUST wipe system , data & cache.
Install zip from SD card > Select "JuMBO v1.0 - E330SKL.zip"
Wait until ROM installation completes.
Install zip from SD card > Select "JuMBO ROM - I9506 WiFi Fix.zip"
Reboot after everything finished.
Bugs
Inform me..
Credits
Chainfire for SuperSU
Albe95 for S6 Apps
alemtro for S6 Apps
arter97 for Recovery & WiFi fix
DOWNLOAD
JuMBO v1.0 - E330SKL.zip [1.28GB] <-- Google Drive (New)
Uploaded by pereradileepa
JuMBO v1.0 - E330SKL.zip [1.28GB] <-- InnoLoud Direct Link
JuMBO ROM - I9506 WiFi Fix-New.zip (New)
Note: The e330s recovery works on all 3 models(E330SKL).
Greetings from Sri Lanka, The Wonder of Asia..!!
If you like my work, encourage me with a donation
E330S/K/L Stock Lollipop links
E330S
-------------
E330SKSUDOC2 - Google Drive
E330SKSUDOF3 - SamMobile
E330K
-------------
E330KKKUDOD4 - Fshare.vn
E330KKKUDOF3 - SamMobile
E330L
-------------
E330LKLUDOC2 - Google Drive
E330LKLUDOF3 - SamMobile
Source - VegaViet
Reserved 2
Reserved 3
look interesting,thanks gonna test it.one question will cwm recovery work for L model,because i saw it said e330s....sorry for my english.
noriya said:
look interesting,thanks gonna test it.one question will cwm recovery work for L model,because i saw it said e330s....sorry for my english.
Click to expand...
Click to collapse
Yes, It will work on all three models
I9506 support added.
Hi I just wanted to say thank you for all your hard work first and then ask a question.
I have the i9506 and did everything you said to install it but when the phone reboots it gets stuck at the Samsung logo with the model number and the eventually reboots back into recovery.
Do you have any suggestions as to what may be the problem?
Thanks.
Can you modify stock I9506XXUDOF1_I9506FTMDOF1_FTM as the base because as I checked, it's the fastest and less memory consuming rom yet.
The WIFI fix for i9506 only makes the phone unable to boot.
Nite.Achilles said:
The WIFI fix for i9506 only makes the phone unable to boot.
Click to expand...
Click to collapse
Thanks will give it a try without it.
Nite.Achilles said:
The WIFI fix for i9506 only makes the phone unable to boot.
Click to expand...
Click to collapse
New WiFi fix added. Try That.
BarakOsama said:
New WiFi fix added. Try That.
Click to expand...
Click to collapse
sorry my phone still does not boot. Stuck at Samsung logo with the model number i19506
Nite.Achilles said:
sorry my phone still does not boot. Stuck at Samsung logo with the model number i19506
Click to expand...
Click to collapse
Same
Stabba said:
Same
Click to expand...
Click to collapse
What happens if you don't flash the WiFi fix??
BarakOsama said:
What happens if you don't flash the WiFi fix??
Click to expand...
Click to collapse
It does the same. It gets stuck at the logo with the model number then about a minute later it reboots back into twrp recovery.
Sent from my GT-I9506 using Tapatalk
BarakOsama said:
What happens if you don't flash the WiFi fix??
Click to expand...
Click to collapse
If I flash the normal ROM, it boots up. But WiFi isn't working.
When I flash the WiFi fix, then the ROM would not boot up.
Nite.Achilles said:
If I flash the normal ROM, it boots up. But WiFi isn't working.
When I flash the WiFi fix, then the ROM would not boot up.
Click to expand...
Click to collapse
Try replacing the lib file manually.
Extract the Wifi fix zip & copy the lib file into system/lib with correct permissions.
BarakOsama said:
Try replacing the lib file manually.
Extract the Wifi fix zip & copy the lib file into system/lib with correct permissions.
Click to expand...
Click to collapse
yeap now it works. Thanks
Nite.Achilles said:
yeap now it works. Thanks
Click to expand...
Click to collapse
WiFi Fix zip does the same. But I don't know whats wrong with it..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is OmniROM?
OmniROM Gerrit Review
Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Important Informations
-To enable developer options, go to setting>About Phone and tap the build number 7 times.
Download Links
Rom: 18/05/2016
Gapps: OpenGApps(choose ARM package)
What's New
- Wifi works
- New boot animation[emoji14]
- Would like someone to check on working of sim card.
What's Not Working
-Unable to record video
You tell me the rest
Installation Instructions
-Download zip to your sdcard
-Make sure you're using a Compatible Recovery
-Boot into Recovery
-Wipe all your data
-Flash zip from sdcard
-(Optional)Flash Google Apps.zip
-Reboot
XDA:DevDB Information
OmniRom for N7000, ROM for the Samsung Galaxy Note GT-N7000
Contributors
sai24
Source: www.github.com/sainath24
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: #2
Beta Release Date: 2016-05-18
Created 2016-05-04
Last Updated 2016-05-18
Reserved
is the adoptable storage work?
and is the IsoRec recovery work with this ROM?
Hey !
First, I would like to say "Thanks you !!" to sai24.
Second, I've a problem during the flash. I've always an error 7. I've tried to delete lines before first "mount" but always the same eroor. What can I do ?
Thanks
Elarmix said:
Hey !
First, I would like to say "Thanks you !!" to sai24.
Second, I've a problem during the flash. I've always an error 7. I've tried to delete lines before first "mount" but always the same eroor. What can I do ?
Thanks
Click to expand...
Click to collapse
Which recovery and rom do you use? Shouldn't be a problem as long as you come from using lollipop I think.
SamantaSync said:
is the adoptable storage work?
and is the IsoRec recovery work with this ROM?
Click to expand...
Click to collapse
Not sure about adoptable storage. Would be better if you give it a try[emoji14]
I come from using NightOwls beta 5
after install, (format system,cache, data) (I flash ROM, Open Gapps, and Xposed Frameworks using TWRP IsoRec)
-TWRP IsoRec still work after install :good:
-wifi doesnt work (as it says) :crying:
-SIM card doesnt detected. (even after replugging the SIM card and reboot) :crying:
-camera : (back and front camera have the same condition)
o taking photo work :good:
o Taking video doesnt work (I tried every video quality) it shows camera error
-Memory :
o it appears to make another internal storage as the original internal storage is recognized as sd card
o files from original internal storage(sd card), external SD card, and USB OTG cannot be opened. (it still display the list of files but error when try to open any files) :crying:
thats what I got from trying this :v
maan, this isnt even a beta I think haha #nohardfeelings :silly:
well at least it does boot. keep it up :highfive: :highfive:
SamantaSync said:
I come from using NightOwls beta 5
after install, (format system,cache, data) (I flash ROM, Open Gapps, and Xposed Frameworks using TWRP IsoRec)
-TWRP IsoRec still work after install :good:
-wifi doesnt work (as it says) :crying:
-SIM card doesnt detected. (even after replugging the SIM card and reboot) :crying:
-camera : (back and front camera have the same condition)
o taking photo work :good:
o Taking video doesnt work (I tried every video quality) it shows camera error
-Memory :
o it appears to make another internal storage as the original internal storage is recognized as sd card
o files from original internal storage(sd card), external SD card, and USB OTG cannot be opened. (it still display the list of files but error when try to open any files) :crying:
thats what I got from trying this :v
maan, this isnt even a beta I think haha #nohardfeelings :silly:
well at least it does boot. keep it up :highfive: :highfive:
Click to expand...
Click to collapse
Haha Thanks for trying. Will try to fix these issues as soon as possible
Hey !
I've tried from 4.1.2 (stock rom) and philz touch as recovery. But, now i've flash the rom but I can't use my SIM card :/
Elarmix said:
Hey !
I've tried from 4.1.2 (stock rom) and philz touch as recovery. But, now i've flash the rom but I can't use my SIM card :/
Click to expand...
Click to collapse
It's a bug with this rom
sai24 said:
It's a bug with this rom
Click to expand...
Click to collapse
So I only can wait ? But thaks you sai24 ^^
waiting for next build
Wifi Works!!
afifwm said:
waiting for next build
Click to expand...
Click to collapse
Beta 2 up and wifi now works. Would like someone to check on working of sim and comment.
Changelog
- Wifi works
- New boot animation
- Not sure of working of sim
Hey !
I've tried to use you rom but it seems that i alaways can't use wifi and sim card :/
Elarmix said:
Hey !
I've tried to use you rom but it seems that i alaways can't use wifi and sim card :/
Click to expand...
Click to collapse
WiFi also doesn't work? That's strange....
This is screenshot during first config step and my version.
I flashed the rom but both wifi and sim doesn't work.
Giovanni7cc said:
I flashed the rom but both wifi and sim doesn't work.
Click to expand...
Click to collapse
Did you clean install? Wipe everything completely including all the caches and install? Cause wifi works for me.. It didn't work during the setup screen but after that it started working.
sai24 said:
Did you clean install? Wipe everything completely including all the caches and install? Cause wifi works for me.. It didn't work during the setup screen but after that it started working.
Click to expand...
Click to collapse
yep I did. I turned on the wifi in setting or notification bar but actually it was not on, the phone didn't scan any wifi network. And I went back and go into the wifi setting again, the wifi was off.
And I flashed twice ( both wiped everything ) but the problem was still.
Hi da sainath xd
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SYBERIA OS ANDROID P GSI
Hello team, I share the great work you have done to make the GSI SYBERIA OS Android P already with some of the Fix collected in this forum with the rom havooc:
The installation method is quite simple like any GSI:
• Install Treeble recovery.
• Make Wipes
• Install RR Oreo Treeble
• install image SYBERIA OS Android P as system Image
• Install oreo kernel
• and restart normally
• After that if you like you can install Magisk and ready
already includes gaaps
What will not work in the first instance are:
• Rotation
• camera and flash light
• gestures on sensor
but do not worry here I'll leave you the fix
for rotation, copy the sensor folder that I leave here in the path of / system / etc and place the permissions 0755 for the folder and 0644 for the files inside the folder
For camera copy the file Lib_mot_app6_metadata.so in the path in / vendor / lib and place permissions 0644
Par manager in sensor sticks the usr folder that I leave you in the path / vendor keeping the permissions for 0755 folder and for the files contained in 0644
and ready restart and you will have to enjoy this wonderful rom
if you like you can install Gcam for better camera experience
A STRONG EMBRACING AND APPRECIATION TO THE DEVELOPERS WHO ACHIEVED TO DO THIS POSSIBLE
Syberia was the best for Redmi note 4 which i had before, thx ill test.
*Prays for Mod support*
https://forum.xda-developers.com/showpost.php?p=72601804&postcount=2 does this help?
MusicAlleyInc said:
*Prays for Mod support*
https://forum.xda-developers.com/showpost.php?p=72601804&postcount=2 does this help?
Click to expand...
Click to collapse
interesting let's take a look
Not sure if it was because I dirty flashed back and forth with the RR Pie ROM, but my SIM card was not being detected.
I previously didn't have it in this phone for a while so I don't know if it worked after the original install. I'll try again with a clean install sometime, but might wait for Mod support or other feedback confirming working SIM.
I did however flash back to stock Oreo and my SIM is working. Did not eject it or anything.
I think it' safe to say... Z2 play users dream of the day we can be on Pie, with at least the battery mod working (even with a depleted phone battery like on stock) and possibly some form of moto apps/moto voice.
Yes: I experienced a ROM that had mod support but the fork did not properly detect the battery mod while the phone was off/dead. (Huge fail because that is when you would need it the most) Lets just say it made for an interesting day...
Otherwise this is an awesome ROM, probably the best there is for this device... so why not go all the way with it.
litlle front led with notifications is working
widgets are working
Could someone explain to me? how it is done to put permits 0755 and 0644. Please
Dj_AlexBarrera said:
Could someone explain to me? how it is done to put permits 0755 and 0644. Please
Click to expand...
Click to collapse
just use ES Explorer with root, add write permision to /system and /vendor.
Paste folders to destinations, hold finger on folder and choose properties.
On buttom u can change chmod to 0755 ar anything else, use calculator http://www.chmod.pl/chmod-755.html
Here's flashable zip for camera and rotation
Syberia 2.2 patch February. Include GApps.
https://androidfilehost.com/?fid=11410963190603916212
Hey man, thank you for keep the moto z2 play comunity active. its a really good looking rom I used for some couple hours and it looks amazing, but im having this terrible issue about my sim card and the services o my phone. Some way (i dont know if its my fault or the rom) the "com. android.phone keeps stopping" message keep showing at my phone so i cant use any service wich need sim. i already tried to install several times and keep going the same way. i already install the new update but it didnt solve. i hope you can fix this becouse your rom is awesome.
Is it required to flash oreo kernel
I install it whit out problem, but when the device boot up, the system asking for a decrypt password, i introduce any word the de ice reboot, wipe something in revovery and ask for password again, any solution? And sorry for the english.
--------------------------
Lo instale sin problemas pero cuando el celular enciende, el sistema pide una contraseña de desencriptacion, le pongo cualquier letra, se reinicia hace wipes en recovery y vuelve a pedir otra vez la contraseña, no se porque hace eso, alguna solución?
raffles496 said:
Syberia 2.2 patch February. Include GApps.
https://androidfilehost.com/?fid=11410963190603916212
Click to expand...
Click to collapse
no booting
HeltonMax said:
no booting
Click to expand...
Click to collapse
Try with this.
https://drive.google.com/file/d/1FOLJYpNKYvp2CKZYzhEqfpUug2gNCuAn/view
Enviado desde mi unknown mediante Tapatalk
HeltonMax said:
no booting
Click to expand...
Click to collapse
i have no problem
Albus Moto z2 play
Hi, thanks for this awesome ROM.
Hi senior members, I flashed the ROM according to following steps I will explain my problem at the end
Step 1: RR ROM first with twrp
Step 2: flashed syberia img as system image
Step 3: boot to the system
Problem: device memory becomes full even though I wiped my internal before flashing! Please help I really need this rom :good:
Yangyung said:
Hi, thanks for this awesome ROM.
Hi senior members, I flashed the ROM according to following steps I will explain my problem at the end
Step 1: RR ROM first with twrp
Step 2: flashed syberia img as system image
Step 3: boot to the system
Problem: device memory becomes full even though I wiped my internal before flashing! Please help I really need this rom :good:
Click to expand...
Click to collapse
flash oreo kernel?
BeeTLeApp said:
flash oreo kernel?
Click to expand...
Click to collapse
Thanks for your reply.
I am newbie so help me out here.
I didn't flashed the oreo kernel.
Should I flash oreo kernel using twrp after flashing the syberia img .
Please explain how to flash it! :cyclops:
Yangyung said:
Thanks for your reply.
I am newbie so help me out here.
I didn't flashed the oreo kernel.
Should I flash oreo kernel using twrp after flashing the syberia img .
Please explain how to flash it! :cyclops:
Click to expand...
Click to collapse
First syberia flash img system image
after flash oreo kernel img boot option
---------- Post added at 07:06 PM ---------- Previous post was at 07:02 PM ----------
raffles496 said:
Try with this.
https://drive.google.com/file/d/1FOLJYpNKYvp2CKZYzhEqfpUug2gNCuAn/view
Enviado desde mi unknown mediante Tapatalk
Click to expand...
Click to collapse
included gapps?
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh really hard at you.
*/
UPDATE 12/24: WI-FI NOW WORKS! A little christmas gift
Hi all, as anybody knows the pocket plus (S5301) only has one "stable" CM 10.1 ROM which was made by Xado some years ago and never had a working touch (because of that the rom was almost unusable). As I wasn't able to fix the Xado's CM10.1 ROM, I did this port.
THIS IS A WIP, A BETA so don't expect this thing to make your phone run like a high-end device. Please report any errors.
History:
Some time after releasing the Pocket Plus, Samsung released the Pocket Neo (corsica), which I noticed was the light of hope for this tiny device, as they're mostly hardware-compatible (and their sources are too). So I just said "what if I run a pocket neo ROM on my pocket plus?". Indeed, did that and worked at first (with non-working touch, wifi and others). This was a signal that I could use the kernel and ROM sources to give life again to the coriplus.
After fixing the corsica's device, vendor and kernel trees I was able to boot and use happily KitKat on my little device! Just see what works and what doesn't below.
Notes:
The kernel included with this ROM has overclock up to 1.3GHz enabled by default!
This ROM is based on Pocket Neo's LOS 11 ROM, because of this there are bugs.
I don't recommend installing GAPPS because they make any phone lag a lot. If you still want gapps, you're on your own.
Code:
[B]What works: [/B]
Touch
Camera
Sound (speaker, headphones, mic)
USB (MTP, ADB and mass storage tested)
ART (if enabled in dev options)
[B]What doesn't work: [/B]
Bluetooth
RIL (needs testing, might work but don't know)
Screen rotation, caused by sensors (accelerometter/magnetic/orientation)
You tell me.
Downloads:
ROM: lineage-11-20201224-UNOFFICIAL-coriplus.zip - AndroidFileHost
CWM (Odin/Heimdall): cwm-coriplus.tar
CWM zip (for updating from another recovery): cwm-coriplus.zip
CWM (IMG, for flash with dd): cwm-coriplus.img
Installation guide:
Put the phone in download mode by shutting it off, then Volume down + home + power until screen shows the warning and then vol up to confirm.
If you use Odin: select AP or PDA (2nd button, may vary on your version) and look for the cwm tar. After that, click flash and CWM will be flashed.
If you use Heimdall: open it, read phone's PIT and flash cwm-coriplus.tar to RECOVERY partition.
Boot the phone in recovery mode by keeping pressed Volume up + home + power, at the Samsung's logo release power but keep vol up and home until CWM boots
Copy the ROM zip (lineage-11-20blablabla.zip) to the sd card (or internal if you prefer). No space? It's fine, you can sideload it using ADB (see below)
Do a factory reset and wipe system
Select install update from sd card (or internal storage if you copied the ROM zip there), find the ROM zip and select it.
If you prefer to use ADB, you can just do 'adb sideload path/to/rom.zip' instead of copying the ROM zip to internal/sd. For installing ADB, just search on XDA
Wait until it goes back to start menu and select reboot.
The first boot may take some minutes (5~10) so be patient!
Ready to go!
Thanks to:
Everyone who developed for the coriplus before me
bcm216xx
chijure
JPrimero15
Xado
Sources:
Kernel: https://github.com/MLXProjects/android_kernel_rhea
Device tree: https://github.com/MLXProjects/android_device_samsung_coriplus
Local manifest to be used on LOS source: https://github.com/bcm216xx-LOS/local_manifest
Compiling this thing is somehow tricky because you need to edit one or two LineageOS's source files, for more details PM me (or find out yourself )
Some screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
perdon si paresco medio bipolar es que nose si tengo que hablar ingles o español la verdad.
primer error, installation aborted (status 7) al intentar aplicar la rom
rodrigo151515151515151 said:
primer error, installation aborted (status 7) al intentar aplicar la rom
Click to expand...
Click to collapse
Hi, please NEVER quote whole OP post (instead just write on the comment box).
Also, please talk in English only. I understand spanish, but XDA Forums have the rule of talk using English.
About the problems, 1) it's already compatible with almost anything that runs on Android 4.4 and 2) I'll check later for the Status 7 error. If you didn't flash the CWM I'd include, please do it! Error 7 means that the device name is different in recovery and ZIP, so it needs to match (zip doesn't install if recovery doesn't report coriplus).
EDIT: Seems that you didn't install the included CWM, I've checked and both zip and cwm uses the coriplus codename (so it should work).
that error was my fault. i need to format and do fabric reset because of incompatibility with the other rom. so. the only problem is. my phone gets stuck at the mlx logo ;-;
Hello! Im from Argentina and It was my first phone!. I learned a lot of things about custom roms, root, etc with this device. I'm glad to see development for this little device today!. Im going to install this build and report some bugs!. Thanks for your hard work!
I installed successfully your port!. Thank you again!. I found some bugs: 1: Wifi is not working, 2: Bluetooth is showing near devices but you cant sync, 3: While the screen is off for a while it is constantly restarting. 4: SdCard is not recognized by (Device & PC). How can I make logs or help you to solve bugs?.
Thanks for reporting back!
Tomy_esl said:
I found some bugs: 1: Wifi is not working, 2: Bluetooth is showing near devices but you cant sync, 3: While the screen is off for a while it is constantly restarting. 4: SdCard is not recognized by (Device & PC). How can I make logs or help you to solve bugs?.
Click to expand...
Click to collapse
Thanks for you report, and sorry for late response! You can get logs by connecting device to PC and using adb logcat>logcat.log && adb shell dmesg>dmesg.log
Post updated, now Wi-Fi works!
Hello thanks for this great rom but i have problem my phone s5301 doesn't recognize my sim card ( to place call turn off airplane mode)
I already turn it off but there is no signal please reply thanks again..
TALEP1 said:
Hello thanks for this great rom but i have problem my phone s5301 doesn't recognize my sim card ( to place call turn off airplane mode)
I already turn it off but there is no signal please reply thanks again..
Click to expand...
Click to collapse
That's why it has, at "Not working" section, an item called "RIL (might work but don't know)".
Thanks for reporting that it doesn't actually work, will try to fix it.
Hello, good night, first of all I wanted to thank you and want to inform you, your room works amazing for me, I just have an error that I need to solve, I enter the gallery and it won't let me see images.jpg but yes .png? could you solve it? another problem is that it does not play youtube videos, thank you very much in advance
Great work! I'm surprised there are still ROMs for such an old device.
Please don't take this personally, but I'm trying to replace the boot logo (splash screen, not the boot animation) with my own artwork. How do you do that?
MLX said:
Post updated, now Wi-Fi works!
Click to expand...
Click to collapse
wow it's really amazing sir I hope the signal will work in the future.
Erlangga ubay said:
wow it's really amazing sir I hope the signal will work in the future.
Click to expand...
Click to collapse
I've made SIM work at some point, but forget how I did and that was long ago :/
MLX said:
I've made SIM work at some point, but forget how I did and that was long ago :/
Click to expand...
Click to collapse
will you try to fix it again sir?
Erlangga ubay said:
will you try to fix it again sir?
Click to expand...
Click to collapse
I would like to do so, however not sure. Stay tuned in case of any updates.
MLX said:
I would like to do so, however not sure. Stay tuned in case of any updates.
Click to expand...
Click to collapse
Okay ..
and is there any twrp file for this device sir?
Erlangga ubay said:
Okay ..
and is there any twrp file for this device sir?
Click to expand...
Click to collapse
sorry for not having shared that before, I've ported TWRP 3.4 (although not sure if it will be recognized with proper codename): https://androidfilehost.com/?fid=10763459528675577528