Database Develop

Xposed framework doesn't work on my Mi3 (MIUI 7, and kitkat)!?

Any solution for the problem?
I can't instal wsm/xposed framework, because WSM is not compatible with Android SDK version 19.

pumpa007 said:
Any solution for the problem?
I can't instal wsm/xposed framework, because WSM is not compatible with Android SDK version 19.
Click to expand...
Click to collapse
You don't give enough info. For example what version of wsm tools you tried. I checked out one old tutorial for the Mi3 that didn't mention what miui they were using. The version of wsm-tools used makes me think v5.
Go to the link below, if you haven't already. It's recent and covers miui v6/v7. It has both Xposed and wsm-tools.
Despite Redmi in the file name for wsm I have it running on a G3 D851 with MIUI v7 (KitKat).
Just note that the modules downloadable from it are old (probably v5 stuff).
Recommended modules are also on that site.
http://ec2-54-243-194-135.compute-1.amazonaws.com/thread-78894-1-1.html
Below is that old tutorial. If nothing else there's a link in the comments section on how to handle a boot-looped Mi3 in case things go wrong.
All from 2014. [emoji55]
LG G3 D851, Pac-Man ROM, Tapatalk 4.9.5

marcdw said:
You don't give enough info. For example what version of wsm tools you tried. I checked out one old tutorial for the Mi3 that didn't mention what miui they were using. The version of wsm-tools used makes me think v5.
Go to the link below, if you haven't already. It's recent and covers miui v6/v7. It has both Xposed and wsm-tools.
Despite Redmi in the file name for wsm I have it running on a G3 D851 with MIUI v7 (KitKat).
Just note that the modules downloadable from it are old (probably v5 stuff).
Recommended modules are also on that site.
Below is that old tutorial. If nothing else there's a link in the comments section on how to handle a boot-looped Mi3 in case things go wrong.
All from 2014. [emoji55]
LG G3 D851, Pac-Man ROM, Tapatalk 4.9.5
Click to expand...
Click to collapse
The latest MIUI update broke both applications in that thread.
The error message WSM and Xposed give is:
"WSM/Xposed is not (yet) compatible with Android SDK version 19 or your processor architecture (armeabi-v7a)."

raiNiv5 said:
The latest MIUI update broke both applications in that thread.
The error message WSM and Xposed give is:
"WSM/Xposed is not (yet) compatible with Android SDK version 19 or your processor architecture (armeabi-v7a)."
Click to expand...
Click to collapse
That error looks to me like you're using a really old version of wsm-tools. Probably the one that was for MIUI v5 (JellyBean?).
sdk22 = 5.1
sdk21 = 5.0
sdk19 = 4.4 (KitKat)
Go to the first link I provided and try the one from there. It should work. :fingers crossed:
LG G3 D851, Pac-Man ROM, Tapatalk 4.9.5

marcdw said:
That error looks to me like you're using a really old version of wsm-tools. Probably the one that was for MIUI v5 (JellyBean?).
sdk22 = 5.1
sdk21 = 5.0
sdk19 = 4.4 (KitKat)
Go to the first link I provided and try the one from there. It should work. :fingers crossed:
LG G3 D851, Pac-Man ROM, Tapatalk 4.9.5
Click to expand...
Click to collapse
I'm using the latest WSM.
It worked on previous KitKat MIUI version just fine.

same problem
After miui yesterday update, i get the same problem too, before the update it works fine, i'm using the latest xposed for kitkat, i'm stuck now

Same problem here, its rom related, since android version is the same, it looks like they change the architecture (???) (WTF?)

I got the same problem. Do you think they gonna fix it with the next update?

Hi,
same problem here (Mi4W).
I tried 2 found fixes (WSM_XPOSED_5.9.25FIX.zip and WSM_XPOSED.zip) but no success.

Copy these files:
system/bin/app_process
system/lib/libandroid_runtime.so
from 5.9.17 installation (last working rom with xposed) and replace them in a newer version installation with a root explorer or recovery. Reboot. Xposed should work. Tested with Mi3, miui7, china develop rom 5.10.15.

Hi, are these files accessible while in the newer rom ?

I have the same problem on my Redmi 1S.
Did that solution worked for you all?

super-lexa said:
Copy these files:
system/bin/app_process
system/lib/libandroid_runtime.so
from 5.9.17 installation (last working rom with xposed) and replace them in a newer version installation with a root explorer or recovery. Reboot. Xposed should work. Tested with Mi3, miui7, china develop rom 5.10.15.
Click to expand...
Click to collapse
Do you mean replace in the ROM-ZIP-File?
Because I tried to replace on my Mi4W (with root-explorer) which rebooted immediately but can't reboot - hangs on the Mi-screen with "android" animation. I had to flash the ROM again.
I think I have to live without Xposed
regards
Edit: It works I replaced the mentioned files in the newest ZIP-file after download and flashed it.

Have you noticed app data increase? From 1mb to 2mb and so on. I overlooked the app for about a week and it reached up about 200mb.

super-lexa said:
Copy these files:
system/bin/app_process
system/lib/libandroid_runtime.so
from 5.9.17 installation (last working rom with xposed) and replace them in a newer version installation with a root explorer or recovery. Reboot. Xposed should work. Tested with Mi3, miui7, china develop rom 5.10.15.
Click to expand...
Click to collapse
Thanks for the tip, it didn't work the way you describe it (I couldn't replace the 2 files with root explorer since the system partition was mounted as read-only, and after storing them in recovery mode with adb push (fastboot) I got a boot loop), but at least you put me on the right track.
For other newbies who get the dreaded sdk19 error after trying to install the xposed framework on newer android 4.4.4 images and also struggle with this, this is how I did it:
1. Download the last OS image where xposed still worked properly. In my case, this was cyanogenmod 11 nightly build from 2015-11-08 for Samsung Galaxy S4.
2. Unzip the image and save the 2 files somewhere.
3. Download the new OS image you want to flash (in my case: cyanogenmod 11 nightly build from 2015-12-13) and unzip it.
4. Overwrite the 2 files in the appropriate folders of the new image with the old versions. Re-zip the folder, save to phone and flash in recovery.
Done, xposed framework works again, sdk19 error is gone.
Maybe rovo89 could update the installer so that image update is possible without such "hacking" in the future?

Hi,
what about Xposed with MIUI 7 and Android 6.0.1 MM? Is there a way to make it run?

xposed now working after upgrading from miui v6 to v7 khimici redmi note 4g

xposed and wsm works fine on miui v6
upgraded from miui V6 to V7 7.0.5.0 KHIMICI on my redmi note 4g globel version and this massage shown:
xposed is not (yet) compatible with android sdk version 19 or your processor architecture (armeabiv7a)"
also this warning message : linker: /data/data/de,robv.android.xposed.installer/cache/app_process has text relocations . this is wasting memory and is a security risk. please fix.
cannot link executable : cannot locate symbol "_zn7android14androidruntime5startEPKcS2_" refferenced by "/data/data/de.robv.android.xposed.installer/cache/app_process "..
sombody know what this means and how to fix it?
i tried a few versions of xposed and it shows on every one of them!
also deleted/reinstalled the app and cleard its data.
help a buddy!
thank you

[Reference] [Note 4 Exynos N910C CyanogenMod Updates]

List of Builds Released ​
It's better to start from scratch before new build
Click to expand...
Click to collapse
​Build 1
Build 2
Build 3
Build 4
Build 5
Build 6
Build 7
Build 8
Build 9
Build 10
Build 11
Post 216 and Future @erickwill]
Build 12
Build 13
Build 14-FINGERPRINT
Build 15
Build 16[TEST]
Build 17
Build 18 - Reliability Build
Build 19 - VOIP for WhatsApp an IM Apps Fixed
Build 20
Build 21 - Fingerprint /// No Fingerprint
Build 22_VOIP,WIFI,FIngerprint Works_update Bootloader
Build 23
Build 24_Stability Fixes
Build 24(Attempt to fix BT and SMS Bug, FIngerprint might be tricky)
Build 25
Build 26 aka Stable Fix Build
Build 27 aaka Stable Build V2
Build [email protected] Build v3+ Best Build
Build 29 - More Patches to HAL and Kernel
Build 30 - More patches to Kernel
Build 31 - Many Fixes
Build 32 - Many Performance Tweaks - Stable - Fingerprint Working + VOIP Apps need verification
Build 33 - New Update
Build 34
Build 35 @21/8 [Check the camera feature // Smooth as butter improvements
Build 36 - Stable FIngerprint / No more lags / Better VOIP and Bluetooth / Many Patches for kernel [RECOMMENDED]
Build 37 - Refined
Build 38 /// Build 38 Performance Editon [Best Build Ever]
Build 38 - New - 27/9 Build
Build 28 - Minor Fixes
Build 29 Many Patches _ Bluetooth Earpiece WIP
Build 39 - Final Marshmallow Build - Many Minor Fixes and Updates
Changelog [New]
- Kernel patches for security and stability
- Bluetooth earpiece WIP
- HAL changes WIP
Known Bugs
- Home button may not respond when charging on power off state
- Good Camera but is quite glitch when changing front and rear camera
- VOIP is Stable + Bluetooth [NO VOI+LTE]- Sms Bug
Fixed Issue
- Fingerprint is refined
- Performance is smoother than Jelly ​
1.Thanks to : @RaymanFX @andrew.mackew @erickwill
Dear Members, Submit me any bugs you find and i will post It
2. Builds for CM14 (Android N ) will also be posted here Cheers​

Can you please use a different naming scheme for the builds listed under 'Post 216 and Future'? It suggests that these builds are from the original author of the thread when they're not.

JohnFlowerful said:
Can you please use a different naming scheme for the builds listed under 'Post 216 and Future'? It suggests that these builds are from the original author of the thread when they're not.
Click to expand...
Click to collapse
Alright, in the future
Thanks

Nice initiative, just a remind.. I'm not the dev.. you should include @erickwill instead of me. I'm just sharing erickwill's roms

Note 4 exynos cm updates. Pls change it in 910C or something.
Would be great to includes the U variant as well. And H or what ever it is ?
I think C is usable for H as well? Not sure.

Can I use roms from F, C, H on a Verizon 910V? Even if bootloader is unlocked and rooted? Thanks

jazzdglass said:
Can I use roms from F, C, H on a Verizon 910V? Even if bootloader is unlocked and rooted? Thanks
Click to expand...
Click to collapse
No you can't, your variant uses a Snapdragon processor (US variants, including Verizon's), and the other uses a Exynos, they aren't compatible at all

fleepant said:
No you can't, your variant uses a Snapdragon processor (US variants, including Verizon's), and the other uses a Exynos, they aren't compatible at all
Click to expand...
Click to collapse
Any suggestion or solution to fix sms not sent error?

hi eddieleon7pc ,
i have installed build 18 , now my battery drains faster before .when i go to battery settings its says ''error'' application stoped. is there anyone help me , how can i fix that issue you ?.
n910c /6.0.1 /ARM/ Mali-T760/ kernel version: 3.10.9-g997d49e-dirty(0dd0817b1f)

I was not able to flash this ROM on my note4 910h
( [6.0.1][TW][N910C/H/U] Hani Base v1.01 [18-04-2016])
http://forum.xda-developers.com/note-4/development/rom-hani-base-t3355958
Having latest TWRP 3.0.2.0. wiped Data, System, cache and dalvik.
Please help me to get CM 13 on my note 4.

hi
i installed built 18 on my smn910c
i have problem with camera , it crashes ,
also msot important with LTE ,, after a period of time my phone stops having internet connection unless i reboot my phone.
lte is really important to me.
thanks.

45gen said:
hi eddieleon7pc ,
i have installed build 18 , now my battery drains faster before .when i go to battery settings its says ''error'' application stoped. is there anyone help me , how can i fix that issue you ?.
n910c /6.0.1 /ARM/ Mali-T760/ kernel version: 3.10.9-g997d49e-dirty(0dd0817b1f)
Click to expand...
Click to collapse
Did you dirty flash?

hg3 said:
i installed built 18 on my smn910c
i have problem with camera , it crashes ,
also msot important with LTE ,, after a period of time my phone stops having internet connection unless i reboot my phone.
lte is really important to me.
thanks.
Click to expand...
Click to collapse
Submit logcat to the dev

srk_srinivas said:
I was not able to flash this ROM on my note4 910h
( [6.0.1][TW][N910C/H/U] Hani Base v1.01 [18-04-2016])
http://forum.xda-developers.com/note-4/development/rom-hani-base-t3355958
Having latest TWRP 3.0.2.0. wiped Data, System, cache and dalvik.
Please help me to get CM 13 on my note 4.
Click to expand...
Click to collapse
Submit to the dev he will sort this out

eddieleon7pc said:
Did you dirty flash?
Click to expand...
Click to collapse
clean everything , just upload build 19 . my battery still drains faster before and excessive warming.

You should add SMS sent prompt error to known bugs category. It's a bit annoying and may be confusing for new users.
Wysłane z mojego SM-N910C przy użyciu Tapatalka

Has the sms bug fixed yet?

BiG tHaNkS
Hello @eddieleon7pc
thanks 4 ur big work ^_^
We r w8ing 4 ur updates & fixes

aref73 said:
Hello @eddieleon7pc
thanks 4 ur big work ^_^
We r w8ing 4 ur updates & fixes
Click to expand...
Click to collapse
Coming right up
Stay awesome m8

Gracias! Mucho mejor que la oficial! Como instalo la actualización?
Sent from my SM-N910C using XDA-Developers mobile app

[GUIDE] Install Xposed Framework across ROMs (MIUI / Custom / KK / LL / MM)

Hello All,
I have seen posts across forum seeking support for installing Xposed Framework for our phone - Redmi 2 (wt88047).
For a new person it can be indeed confusing as Xposed files vary depending upon Android version (different for Android 5.0/5.1/6.0) as well as vary depending upon processor (different for arm, arm64, x86)
Hence this guide, following which one can easily find, download and install right version of Xposed Framework and can start enjoying various xposed modules.
Prerequisite is to have rooted phone with Custom Recovery (TWRP / CWM).
Now there are two variants of Xposed Framework. To get more insights pls read further else move to Step 1
1) Official release by rovo89 which works fine for ROMs like CM, AOSP and others based on CM, AOSP etc. Unfortunately this official version doesn't work with MIUI
2) Unofficial release by SolarWarez which is tweaked to work for MIUI devices. This works perfectly well for MIUI ROMs (including stock rom loaded on our phone as well as other custom MIUI versions like one from xiaomi.eu)
While I have linked to the original threads for the two xposed variants, it can be still confusing as there are total of 9 files (3 android versions multiplied by 3 processor types). Our device Redmi 2, though has 64-bit processor but all ROMs are 32 bit only. Hence we need to get arm files.
STEP 1 - Downloading the right type of files
File No. 1: XposedInstaller_3.0-alpha4.apk from here
File No. 2: Xposed*.zip (version 86 for all except MIUI Kitkat) installation file from below depending upon ROM type. For v87 go to next post below.
For devices running MIUI ROMs download one of the following files depending upon base android version (Lollipop / Marshmallow):
Xposed 2.6.1 for MIUI based on Android 4.4.X
SDK21 for MIUI based on Android v5.0 (Lollipop)
SDK22 for MIUI based on Android v5.1 (Lollipop)
SDK23 for MIUI based on Android v6.0 (Marshmallow)​
For devices running CM, AOSP or other similar Custom ROMs download one of the following files depending upon base android version (Lollipop / Marshmallow):
SDK21 for Custom ROM based on Android v5.0 (Lollipop)
SDK22 for Custom ROM based on Android v5.1 (Lollipop)
SDK23 for Custom ROM based on Android v6.0 (Lollipop)​
File No. 3: Xposed-uninstaller*.zip from here to uninstall the framework.
STEP 2 Installing the files
- Install Xposed Installer apk (file no. 1)
- Copy the Xposed*.zip (file no. 2) and the Xposed-uninstaller*.zip (file no. 3) to your sdcard
- Reboot to custom recovery
- Make a nandroid backup
- Flash "xposed*.zip" through custom recovery
- Reboot and wait, it may take several minutes to boot up depending on your ROM size and installed apps amount.
If phone doesn't boot even after 5 minutes then reboot into recovery and restore by using nandroid backup or by flashing Xposed-uninstaller*.zip
That's it... In case anything fails, pls read carefully and verify that right version of xposed*.zip file has been installed.
Credits to @rovo89 & @SolarWarez. If you like the work, pls donate to @rovo89
Press thanks if you find this thread helpful

Xposed Framework version 87
In post above, the xposed files are for version 86. But now we have v87 also available and hence sharing links for v87 in this post. This is actually file no. 2. Rest all steps as per above post.
Download Xposed*.zip (v87) from below link depending upon android version (LP, MM) and rom (MIUI / CM or AOSP) type.
For devices running MIUI ROMs download one of the following files depending upon base android version (Lollipop / Marshmallow):
SDK21 for MIUI based on Android v5.0 (Lollipop)
SDK22 for MIUI based on Android v5.1 (Lollipop)
SDK23 for MIUI based on Android v6.0 (Marshmallow)​
For devices running CM, AOSP or other similar Custom ROMs download one of the following files depending upon base android version (Lollipop / Marshmallow):
SDK21 for Custom ROM based on Android v5.0 (Lollipop)
SDK22 for Custom ROM based on Android v5.1 (Lollipop)
SDK23 for Custom ROM based on Android v6.0 (Lollipop)​
PRESS THANKS if you found this helpful.

I'm using Global Dev ROM - MIUI 8 which is on KK. I've installed the apk but it says unsupported

Akhil916 said:
I'm using Global Dev ROM - MIUI 8 which is on KK. I've installed the apk but it says unsupported
Click to expand...
Click to collapse
Sorry for late response... you need to install
SDK22 for MIUI based on Android v5.1 (Lollipop)
It works well for me..

mGforCe said:
Sorry for late response... you need to install
SDK22 for MIUI based on Android v5.1 (Lollipop)
It works well for me..
Click to expand...
Click to collapse
Wel, I should've edited my comment. I flashed the Lollipop ROM instead of KK. Hence, I was unable to. Thanks anyway

Akhil916 said:
Wel, I should've edited my comment. I flashed the Lollipop ROM instead of KK. Hence, I was unable to. Thanks anyway
Click to expand...
Click to collapse
Ok, so hope all working now.

mGforCe said:
Ok, so hope all working now.
Click to expand...
Click to collapse
Absolutely

Akhil916 said:
Absolutely
Click to expand...
Click to collapse
Good to know... [emoji1]
Sent from my mobile device

i have flashed successfully the .zip file all apps are working expect imei changer. plz guide or update if there any. I am on miui 7.5 stable 5.1 lolipop. please help

I'm having problems with Xposed for KK MIUI. I can't download modules. The Xposed Installer simply starts to download, and after one second stops the download. I have to install/update manually every module. I tried to download trough wifi and mobile data, without success. There is a solution? I need to install the 3.0 installer apk?

Help me Stuck in bot loop
I am using miui 8 china devloper rom 6.9.1 in redmi 2 prime. I have flashed the correct zip file but whet it reboots only boot animation runs. Plz suggest me what should i do for xposed framework

Lots of modules not working
I have XIAOMI REDMI 2 PRIME running MIUI 8 (LP 5.1.1).
Lots of modules not working like MaxLock Xmiui etc. I have activated it in Xposed Installer and tried reinstalling it.. still it is not working.
kindly suggest the solution..

I am using Redmi 2 with miui 8 and Android 4.4.4.
After installing the apk and framework my contacts is showing error and I am unable to open it please help me ASAP.

Similar here
Harikesh409 said:
I am using Redmi 2 with miui 8 and Android 4.4.4.
After installing the apk and framework my contacts is showing error and I am unable to open it please help me ASAP.
Click to expand...
Click to collapse
I updated from miui 7 to 8 but Redmi 2 prime on miui 8 is still based on Kitkat. Unlike 7 the Xposed doesn't work. It instals but ALL THE MODULES give FC no matter how or what I try

Harikesh409 said:
I am using Redmi 2 with miui 8 and Android 4.4.4.
After installing the apk and framework my contacts is showing error and I am unable to open it please help me ASAP.
Click to expand...
Click to collapse
Muntha_Go_Grand said:
I updated from miui 7 to 8 but Redmi 2 prime on miui 8 is still based on Kitkat. Unlike 7 the Xposed doesn't work. It instals but ALL THE MODULES give FC no matter how or what I try
Click to expand...
Click to collapse
Are the issues sorted?
Best is that you can first uninstall the xposed, reboot, install xposed and then see. This should help. For me working with MIUI LP (I flashed gkalen's version)

any development in Android. 7, i m using tesla rom

drrakesh85 said:
any development in Android. 7, i m using tesla rom
Click to expand...
Click to collapse
No. Pls check exposed subforum for same. As of now no release.
Sent from RN3 Pro

Updated to v87
Revised the main post. Also added links for latest xposed v87. Pls refer to second post.

After installing the files, i cant open the app xposed..
Sorry for my english
Sent from my 2014819 using Tapatalk
---------- Post added at 04:22 AM ---------- Previous post was at 04:07 AM ----------
12#21 said:
After installing the files, i cant open the app xposed..
Sorry for my english
Sent from my 2014819 using Tapatalk
Click to expand...
Click to collapse
Sorry my bad, i try reboot and absolutely work
Sent from my 2014819 using Tapatalk

[ROM][OFFICIAL] Nitrogen-OS [11] [ROLEX/RIVA]

[ROM][OFFICIAL] Nitrogen-OS [11] [ROLEX/RIVA]
Android OS Version: 11.x
For devices: Xiaomi Redmi 4a (rolex) and Xiaomi Redmi 5a (riva)
Authors build: @Thago
Source code: https://github.com/nitrogen-project
Based on AOSP
Download , gapps and Magisk (Optional)
Reboot to recovery
Wipe Data, System,Vendor and cache
Flash ROM , Magisk (Optional).
Reboot
Enjoy
Download-Rom: https://sourceforge.net/projects/ni...va/Nitrogen-OS-11-rova-20210109.zip/download/
Gapps: A working gapps (NikGapps)
Magisk: (Latest Magisk Stable/Beta
XDAevDB Information
[ROM][OFFICIAL][STABLE][11] NitrogenOS, ROM for the Xiaomi Redmi 4A / 5A
Contributors
@Thago, cafebabe, xyyx
Source code
Common device tree: https://github.com/Thagoo/android_device_xiaomi_msm8917-common/tree/nitrogen-11
Device tree: https://github.com/Thagoo/android_device_xiaomi_rova/tree/nitrogen-11
Kernel: https://github.com/Thagoo/platform_kernel_xiaomi_msm8917/tree/lineage-18.0
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: 9.2.6.0 or above
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2020-12-16

Thago said:
...
Probable fixes for SIM2 disappearence added
Click to expand...
Click to collapse
It's ROM or Kernel side problem?
P.S. Vanilla version planned, w/o GAPPS

suzver said:
It's ROM or Kernel side problem?
P.S. Vanilla version planned, w/o GAPPS
Click to expand...
Click to collapse
Its not kernel or gapps problem

I'm having an issue with the SD card, sometimes (most of the time while charging for a long period) the SD hang and the system don't detect it till I reboot the phone.
The SD card has been working with stock miui rom since the phone release, and having the fact that the 2nd sim sometimes hangs, I think is a related problem to the 2nd slot.
The rest of the experience is incredible comparing with stock miui, really night and day diference, thanks for the working that dev's did in this rom.

ojetepelon001 said:
I'm having an issue with the SD card, sometimes (most of the time while charging for a long period) the SD hang and the system don't detect it till I reboot the phone.
The SD card has been working with stock miui rom since the phone release, and having the fact that the 2nd sim sometimes hangs, I think is a related problem to the 2nd slot.
The rest of the experience is incredible comparing with stock miui, really night and day diference, thanks for the working that dev's did in this rom.
Click to expand...
Click to collapse
Thanks for letting me know the bugs will try to fix them in next update and happy to hear that you getting good experience with custom roms

CHANGELOGS 2021 Jan 9
* January 2021 security patch and many more..
Device-
* Update vendor blobs from LA.UM.9.6.2.r1-03300-89xx.0
* Partially Update RIL, QMI & IMS blobs from LA.UM.9.6.2.r1-03300-89xx.0 and update ims blobs symlink
* sepolicy: add rules for fm_radio
* Update thermal-engine configuration.
msm8917-common Update Graphics blobs from LA.UM.9.6.2.r1-03300-89xx.0
* Upstream kernel to linux-v4.9.249
* Merge LA.UM.9.6.2.r1-03600-89xx.0 tag into kernel
* And updates from CAF

Thago said:
CHANGELOGS 2021 Jan 9
* January 2021 security patch and many more..
Device-
* Update vendor blobs from LA.UM.9.6.2.r1-03300-89xx.0
* Partially Update RIL, QMI & IMS blobs from LA.UM.9.6.2.r1-03300-89xx.0 and update ims blobs symlink
* sepolicy: add rules for fm_radio
* Update thermal-engine configuration.
msm8917-common Update Graphics blobs from LA.UM.9.6.2.r1-03300-89xx.0
* Upstream kernel to linux-v4.9.249
* Merge LA.UM.9.6.2.r1-03600-89xx.0 tag into kernel
* And updates from CAF
Click to expand...
Click to collapse
Hi again thago, thanks for the updates, they're really welcome.
I want to know if there is out there any Gcam that work well with the rom, because for me at least, the camera can't take pictures with flash, simply don't work at all.
Thank you for your time!

ojetepelon001 said:
Hi again thago, thanks for the updates, they're really welcome.
I want to know if there is out there any Gcam that work well with the rom, because for me at least, the camera can't take pictures with flash, simply don't work at all.
Thank you for your time!
Click to expand...
Click to collapse
Try GCam by arthur for Redmi 4X, that's what I used on Android 10. Do report back if it worked/didn't work.
If not, try the other recommended versions.

MaxisMan said:
Try GCam by arthur for Redmi 4X, that's what I used on Android 10. Do report back if it worked/didn't work.
If not, try the other recommended versions.
Click to expand...
Click to collapse
Nope anygcam I tested worked :\

Scrcpy in't working with this rom I'm getting this error:
c:\adb>scrcpy
INFO: scrcpy 1.17 <https://github.com/Genymobile/scrcpy>
c:\adb\scrcpy-server: 1 file pushed, 0 skipped. 24.8 MB/s (34930 bytes in 0.001s)
[server] INFO: Device: Xiaomi Redmi 4A (Android 11)
INFO: Renderer: direct3d
INFO: Initial texture: 720x1280
WARN: Device disconnected
[server] ERROR: Exception on thread Thread[main,5,main]
java.lang.IllegalStateException
at android.media.MediaCodec.native_dequeueOutputBuffer(Native Method)
at android.media.MediaCodec.dequeueOutputBuffer(MediaCodec.java:3452)
at com.genymobile.scrcpy.ScreenEncoder.encode(ScreenEncoder.java:113)
at com.genymobile.scrcpy.ScreenEncoder.internalStreamScreen(ScreenEncoder.java:94)
at com.genymobile.scrcpy.ScreenEncoder.streamScreen(ScreenEncoder.java:60)
at com.genymobile.scrcpy.Server.scrcpy(Server.java:80)
at com.genymobile.scrcpy.Server.main(Server.java:252)
at com.android.internal.os.RuntimeInit.nativeFinishInit(Native Method)
at com.android.internal.os.RuntimeInit.main(RuntimeInit.java:399)
WARN: Killing the server...
it used to work with the official MIUI 10 that I had earlier

ojetepelon001 said:
Hi again thago, thanks for the updates, they're really welcome.
I want to know if there is out there any Gcam that work well with the rom, because for me at least, the camera can't take pictures with flash, simply don't work at all.
Thank you for your time!
Click to expand...
Click to collapse
I have added Gcamgo prebuilt

theanuragsoni said:
Scrcpy in't working with this rom I'm getting this error:
c:\adb>scrcpy
INFO: scrcpy 1.17 <https://github.com/Genymobile/scrcpy>
c:\adb\scrcpy-server: 1 file pushed, 0 skipped. 24.8 MB/s (34930 bytes in 0.001s)
[server] INFO: Device: Xiaomi Redmi 4A (Android 11)
INFO: Renderer: direct3d
INFO: Initial texture: 720x1280
WARN: Device disconnected
[server] ERROR: Exception on thread Thread[main,5,main]
java.lang.IllegalStateException
at android.media.MediaCodec.native_dequeueOutputBuffer(Native Method)
at android.media.MediaCodec.dequeueOutputBuffer(MediaCodec.java:3452)
at com.genymobile.scrcpy.ScreenEncoder.encode(ScreenEncoder.java:113)
at com.genymobile.scrcpy.ScreenEncoder.internalStreamScreen(ScreenEncoder.java:94)
at com.genymobile.scrcpy.ScreenEncoder.streamScreen(ScreenEncoder.java:60)
at com.genymobile.scrcpy.Server.scrcpy(Server.java:80)
at com.genymobile.scrcpy.Server.main(Server.java:252)
at com.android.internal.os.RuntimeInit.nativeFinishInit(Native Method)
at com.android.internal.os.RuntimeInit.main(RuntimeInit.java:399)
WARN: Killing the server...
it used to work with the official MIUI 10 that I had earlier
Click to expand...
Click to collapse
Thnx for reporting will try to fix

Thago said:
I have added Gcamgo prebuilt
Click to expand...
Click to collapse
Gcamgo is working fine in my device but please can you tell me why scrcpy isn't working in this ROM (see my reply on this page above)

theanuragsoni said:
Gcamgo is working fine in my device but please can you tell me why scrcpy isn't working in this ROM (see my reply on this page above)
Click to expand...
Click to collapse
You've flash when you take pictures? for me is totally not working, but de torch by itself works perfectly fine

Been using this ROM for a few weeks now with NikGapps. It's mostly been smooth and stable, and GCam Go works. The only issues I'm facing are FB Messenger notification either getting delayed or not coming at all (sometimes there'll be a sound but no notif), faster than usual battery drain (could Xiaomi Doze be the culprit?), apps constantly needing to reload, and a few choppy animations here and there. For context, I was on Superior (10), Opengapps and using the same apps beforehand.

ojetepelon001 said:
You've flash when you take pictures? for me is totally not working, but de torch by itself works perfectly fine
Click to expand...
Click to collapse
No flash isn't working neither in gcamgo nor in camera and also not in WhatsApp's camera but I use alarmy app as alarm, it has 'take photo to turn off alarm' and flash is working fine in that camera in alarmy

Thago said:
Thnx for reporting will try to fix
Click to expand...
Click to collapse
Thanks for responding but I think this issue is only in my laptop because when I opened scrcpy in my PC it worked fine

MaxisMan said:
Been using this ROM for a few weeks now with NikGapps. It's mostly been smooth and stable, and GCam Go works. The only issues I'm facing are FB Messenger notification either getting delayed or not coming at all (sometimes there'll be a sound but no notif), faster than usual battery drain (could Xiaomi Doze be the culprit?), apps constantly needing to reload, and a few choppy animations here and there. For context, I was on Superior (10), Opengapps and using the same apps beforehand.
Click to expand...
Click to collapse
Even with this gcam go I just can't use the flash, really weird, because if I use it as a torch it work perfectly fine but the camera just don't turn it on

Try GCam by arthur for Redmi 4X, , it works for me!
pity that we can not save on external SD

@Thago Can you add support for low_ram config? Would be a perfect option for our device.