Related
I can't seem to pair my Touch Diamond with my MacBook Pro running 10.5, they can't see each other via bluetooth at all no matter which side initial the search. I wonder if there is anyone came across the same situation and have a solution or any ideas what may went wrong.
I have tried with the original stock rom and two different cooked rom, still no luck...
which sync software do you use on OS X ... i'm using "the missing sync 4.0.3" ... everything works fine
I just want to pair them with bluetooth and use PAN to use my data connection.
Any idea?
Do you want to use the data connection of your Mac? I only was able to use the data connection of my diamond via Bleutooth-PAN. The other way around seems to have an issue.
I have posted this question also to the discussion forum at apple.
http://discussions.apple.com/message.jspa?messageID=7632465#7632465
About pairing both (Mac and Diamon) this works for me (MBPro OS X 10.5.4). Have you enabled the "visibility" of both devices during pairing?
Hi,
Its possible to use the Diamond as an internet modem with OSX.
I had tried to get this to work for the last couple of weeks.
It really depends on your bluetooth dongle. I had success with Cambridge Silicon based chipsets. I had a Belkin one and another generic one which didn't work.
You need to pair it from within OSX. You'll know its successful when it displays an option for joining bluetooth PAN after pairing. You'll have an option to "Join Network" under the paired device submenu in the OSX Bluetooth menu.
Once its done, all you need to do is start ICS on ur Diamond and select Bluetooth PAN, than Connect. After that, select "Join Network" on ur Mac and off you go!.
You can also connect the diamond to the USB port for power.
I tried USBModem which didnt work.
My laptop is an Acer 5570 hackintosh. Hope this helps.
rtao said:
I can't seem to pair my Touch Diamond with my MacBook Pro running 10.5, they can't see each other via bluetooth at all no matter which side initial the search. I wonder if there is anyone came across the same situation and have a solution or any ideas what may went wrong.
I have tried with the original stock rom and two different cooked rom, still no luck...
Click to expand...
Click to collapse
Probably a stupid question but have you ticked the box on the Diamond that says "Make this device visible to other devices"?
It can be found under Communications - Settings menu - Bluetooth
and it's on the Mode tab.
I want to use my ICS via PAN, and I can't pair my Diamond with my MacBook Pro with bluetooth, they can't see each other no matter which side I initial the search and I am sure both of them have turned on the discoverable option....
I can pair my diamond with my iMac ONLY if I disable TF3D!
I use Eltima SyncMate (epert edition) to sync and it's working great.
Only if I leave TF3D on the driver on the diamond will crash.
Luckely it's quite simple to disable TF3D n a few clicks.
(Start>settings>home>unselect TF3D>[OK])
Eltima has updated their drivers.
It works now:
Syncing (folders, contacts, mail etc etc) while TF3D is running
There are a few solutions available in case you have not already solved the problem:
The free part of SyncMate works well for contacts and calendar and supports internet sharing
http://mac.softpedia.com/progDownload/SyncMate-Download-28111.html
I am running OS X on Dell 1525 with Bluetooth Internet sharing with HTC Diamond, and syncing contacts and calendar with SyncMate with USB Bluetooth as a matter of routine.
The diamond supports a whole list of BT profiles, but in windows vista 64 i can only see and use PUSH, DUN and PAN.
I'd really like to use HID so i can use the phone as a remote. I haven't been able to find any post or solution to this problem. Any help ?
running standard 2.03 ROM (NLD) and standard radio,
host OS is vista ultimate 64bit
Really no-one knows how to address this ? I can't imagine no one finds these bluetooth functions interesting ?
Hi,
Does someone know any program for WM 6.1 where you can call with youre mobile on your pc when there is a connecting between youre pc and WM phone?
On this moment I use My Mobiler to controll my phone on my pc but I miss a function on it for calling so the sound and microphone will be used on my pc.
That would be very nice and handy!!
Thanks in advanced!
Ricky
The only way I'd see to have sound is to use a PC with bluetooth, and on the phone set the PC as being a "headset".
Hi,
That doesnt work in my case...
I can only file transfer and do some networking functions.
My pc can not function as a headset.
Thanks!
Well, AFAIK the phone audio path in WM-based phones does not go through the PDA part, so there's no way to hack into it by software via network or whatever.
I don't see another solution. Maybe you can try changing the Bluetooth stack on your PC with the Widcomm or Bluesoleil ones for example, as those support headset profiles.
Thanks for that info.
Than I will try it with an other bleutooth stick and hope it will work!
Just to make sure, I mentioned "stack" not "stick". I.e the bluetooth software on the PC, not the hardware dongle. The dongle should be fine in any case.
Ohw.... I was already installing another stick.
Wich software ie do you mean then?
I am installing the Sitecom software now, is that what you mean?
Rickezz said:
I am installing the Sitecom software now, is that what you mean?
Click to expand...
Click to collapse
Never heard about that. But I gave 2 examples in my above post.
Ok, I thought that where the dongles.
I will figure it out somehow, thanks!
I've never tried making a call through your phone through your PC but for bluetooth internet sharing file transfer and a few other things bluesoleil has worked great for me
Hello all,
I can't setup working BT tethering under Mac OSX (10.5). Could you help me ? N1 uses the newest cyanogen mod stable rom, and I have "Internet tethering" sets to on. Both devices are paired, but what should I do next on OSX side ? Should I install any 3rd party software such as pdanet ?
Is that tethering different than regular bluetooth connection using embedded phone modem ? I'm asking because in Network configuration in OSX Preferences I have BT interface, where I have to provide phone no., login and password.
Thanks in advance, Tomek.
Well I'm pretty new here, but from what I know there is no bluetooth tethering option. Sure you can pair with others bluetooth devices, but there is no stock internet tethering via bluetooth. Once again, afaik.
The stock Froyo tethering is very simple....it turns your N1 into a wireless base station. If you want to do usb tethering then you can use pdanet. I think pdanet also supports bluetooth tethering, but I've never tried it.
Thanks for your reply.
I wonder why Internet tethering option has description "... via USB/BT" ?
We're talking about CyanogenMod 5.0.8-N1
I'd love to know this as well.
The Cyanogenmod 5.0.8 changelog lists that he added BT tethering, available both via Bluetooth PAN, and Bluetooth DUN, using code from Stefan Tomanek aka wertarbyte. It's something called 'omni-tether.'
But I've yet to get it to work. I tried asking in the CM forum, but got no response.
Hello.
How to block permanently the MAC address for one bluetooth device on rooted phone with TASKER?
You are looking to make sure your device never connects to that device?
Android will only pair with a device if it's been manually paired with to start with. Just don't pair that device and it can not connect to your phone.
Androidauto automatically connects to bluetooth after plugging the usb cable. I want to block the bluetooth connection to the car permanently (block MAC address)
I don't use Android Auto. A quick search on Google help pages seems to suggest the same thing. Go into Bluetooth settings and "forget" the car.
This solution not working (android auto automatically connect phone with car radio when plugged usb)
Well, yes, that's how Android Auto works. If the car or at least the radio is Android Auto, then when you plug in the USB, Android Auto launches and streams media and navigation through the USB.
However, the phone should go over Bluetooth, so if you remove the car/head unit from the phone's Bluetooth ("forget it"), then calls should go to a headset or some other Bluetooth device.
Are you trying to avoid having AA launch at all when plugged in?
You are rooted.. just disable Bluetooth completely. No Bluetooth for Android Auto and for everything :laugh: .. kmm how to do it in tasker is the real question
I disabled Bluetooth on my 2nd phone (connected to Android Auto, constantly connected, I just leave it in car) and my main phone is connected via Bluetooth (for calling,music,etc).
That's just one solution.
second solution is cloning mac adresses (both phones have same mac). But it doesn't work on all HURs (restrictions).
Good luck
Sent from my Redmi Note 5 using XDA Labs
drnightshadow said:
You are rooted.. just disable Bluetooth completely. No Bluetooth for Android Auto and for everything :laugh: .. kmm how to do it in tasker is the real question
I disabled Bluetooth on my 2nd phone (connected to Android Auto, constantly connected, I just leave it in car) and my main phone is connected via Bluetooth (for calling,music,etc).
That's just one solution.
second solution is cloning mac adresses (both phones have same mac). But it doesn't work on all HURs (restrictions).
Good luck
Sent from my Redmi Note 5 using XDA Labs
Click to expand...
Click to collapse
Hi. I am also looking for a solution to the bluetooth problem.
In my case, I cannot disable the bluetooth services, since I need the bluetooth to connect with the ABD2 Adapter.
Is there any other solution?
I have looked for information on how to change to put the same bluetooth MAC on both phones but cannot find it.
Could you help me?
Thank you
Alexander
Medicina200401 said:
Hi. I am also looking for a solution to the bluetooth problem.
In my case, I cannot disable the bluetooth services, since I need the bluetooth to connect with the ABD2 Adapter.
Is there any other solution?
I have looked for information on how to change to put the same bluetooth MAC on both phones but cannot find it.
Could you help me?
Thank you
Alexander
Click to expand...
Click to collapse
Go search in Android Auto section there you'll find multiple threads about 2 phones connections. Basically 2 phones have same MAC but in some HUR(radio media system) fails. So, there is no universal solution. It depends on your HUR.
Good luck.
drnightshadow said:
Go search in Android Auto section there you'll find multiple threads about 2 phones connections. Basically 2 phones have same MAC but in some HUR(radio media system) fails. So, there is no universal solution. It depends on your HUR.
Good luck.
Click to expand...
Click to collapse
Hi. I have searched several forums. In one of the threads, where the MAC change is discussed, they do not explain how to do it. Editing the EFS / Bluetooth / bt_addr file does not measure the mac address.
Changing the MAC is the only thing I couldn't prove yet.
You know how to change the mac I would be very grateful
Thank you
Alexander
Medicina200401 said:
Hi. I have searched several forums. In one of the threads, where the MAC change is discussed, they do not explain how to do it. Editing the EFS / Bluetooth / bt_addr file does not measure the mac address.
Changing the MAC is the only thing I couldn't prove yet.
You know how to change the mac I would be very grateful
Thank you
Alexander
Click to expand...
Click to collapse
Omfg really?? ? https://forum.xda-developers.com/android-auto/android-auto-general/aa-phones-t3741671
Whats this link do? ? search is working I guess.
And you don't need to change MAC but you need to spoof it. Use (ed)xposed module to do so or you can try manualy ?.
Good luck.
drnightshadow said:
Omfg really?? https://forum.xda-developers.com/android-auto/android-auto-general/aa-phones-t3741671
Whats this link do? ? search is working I guess.
And you don't need to change MAC but you need to spoof it. Use (ed)xposed module to do so or you can try manualy .
Good luck.
Click to expand...
Click to collapse
Thank you very much, but for you to see that I use the search engine, the last one that wrote in that thread is me.
I tried exposed, but it was not trivial, since Edexposed and magisk gave me some problems. I tried some exposed modules but they failed. (of course I'm not the most expert).
I'm going to look for how to do it manually ...... I look for it with the term spoofing? some other search term?
Thanks for the patience and don't be mad !!!!