The diamond supports a whole list of BT profiles, but in windows vista 64 i can only see and use PUSH, DUN and PAN.
I'd really like to use HID so i can use the phone as a remote. I haven't been able to find any post or solution to this problem. Any help ?
running standard 2.03 ROM (NLD) and standard radio,
host OS is vista ultimate 64bit
Really no-one knows how to address this ? I can't imagine no one finds these bluetooth functions interesting ?
Related
I can't seem to pair my Touch Diamond with my MacBook Pro running 10.5, they can't see each other via bluetooth at all no matter which side initial the search. I wonder if there is anyone came across the same situation and have a solution or any ideas what may went wrong.
I have tried with the original stock rom and two different cooked rom, still no luck...
which sync software do you use on OS X ... i'm using "the missing sync 4.0.3" ... everything works fine
I just want to pair them with bluetooth and use PAN to use my data connection.
Any idea?
Do you want to use the data connection of your Mac? I only was able to use the data connection of my diamond via Bleutooth-PAN. The other way around seems to have an issue.
I have posted this question also to the discussion forum at apple.
http://discussions.apple.com/message.jspa?messageID=7632465#7632465
About pairing both (Mac and Diamon) this works for me (MBPro OS X 10.5.4). Have you enabled the "visibility" of both devices during pairing?
Hi,
Its possible to use the Diamond as an internet modem with OSX.
I had tried to get this to work for the last couple of weeks.
It really depends on your bluetooth dongle. I had success with Cambridge Silicon based chipsets. I had a Belkin one and another generic one which didn't work.
You need to pair it from within OSX. You'll know its successful when it displays an option for joining bluetooth PAN after pairing. You'll have an option to "Join Network" under the paired device submenu in the OSX Bluetooth menu.
Once its done, all you need to do is start ICS on ur Diamond and select Bluetooth PAN, than Connect. After that, select "Join Network" on ur Mac and off you go!.
You can also connect the diamond to the USB port for power.
I tried USBModem which didnt work.
My laptop is an Acer 5570 hackintosh. Hope this helps.
rtao said:
I can't seem to pair my Touch Diamond with my MacBook Pro running 10.5, they can't see each other via bluetooth at all no matter which side initial the search. I wonder if there is anyone came across the same situation and have a solution or any ideas what may went wrong.
I have tried with the original stock rom and two different cooked rom, still no luck...
Click to expand...
Click to collapse
Probably a stupid question but have you ticked the box on the Diamond that says "Make this device visible to other devices"?
It can be found under Communications - Settings menu - Bluetooth
and it's on the Mode tab.
I want to use my ICS via PAN, and I can't pair my Diamond with my MacBook Pro with bluetooth, they can't see each other no matter which side I initial the search and I am sure both of them have turned on the discoverable option....
I can pair my diamond with my iMac ONLY if I disable TF3D!
I use Eltima SyncMate (epert edition) to sync and it's working great.
Only if I leave TF3D on the driver on the diamond will crash.
Luckely it's quite simple to disable TF3D n a few clicks.
(Start>settings>home>unselect TF3D>[OK])
Eltima has updated their drivers.
It works now:
Syncing (folders, contacts, mail etc etc) while TF3D is running
There are a few solutions available in case you have not already solved the problem:
The free part of SyncMate works well for contacts and calendar and supports internet sharing
http://mac.softpedia.com/progDownload/SyncMate-Download-28111.html
I am running OS X on Dell 1525 with Bluetooth Internet sharing with HTC Diamond, and syncing contacts and calendar with SyncMate with USB Bluetooth as a matter of routine.
I like to sync my Diamond with my Vista-computer and " Center for Windows Mobile devices" through Bluetooth.
I have a working connection with USB already, but want to skip the cable.
I can pair the computer with my Diamond but the only services I get on the Diamond is "wireless stereo" and "serial port".
Been trying to read every instruction on both the bluetooth connection in Vista and on the Diamond but it seems I cant get the service-choice I need to be able to sync my outlook and so on.
Any suggestions on how to get my bluetooth connection working?
Have a look at the link below for links to a pdf download which has an in depth solution to the problem you're having. It's specifically for the Toshiba bluetooth stack and it works if you follow the instructions carefully. If you're not using the Toshiba stack, I think it should still give you sufficient clues to configure the bluetooth ports to work with activesync.
http://forum.xda-developers.com/archive/index.php/t-412836.html
studz said:
Have a look at the link below for links to a pdf download which has an in depth solution to the problem you're having. It's specifically for the Toshiba bluetooth stack and it works if you follow the instructions carefully. If you're not using the Toshiba stack, I think it should still give you sufficient clues to configure the bluetooth ports to work with activesync.
http://forum.xda-developers.com/archive/index.php/t-412836.html
Click to expand...
Click to collapse
Thanks for the link but when I get to page 11 step 16 in the pdf it says you should get wireless stereo and Active sync. I get wireless stereo and serial port as my choices.
Don´t know if that´s because I use Vista and Center for Windows Mobile Devices (The new version that has replaced Active sync in Vista and that should make it soooooo easy to connect mobile devices instead of Active Sync.
I'm guessing you're using the default Microsoft Bluetooth stack with Vista? If so, ActiveSync should be available when you pair your phone with your PC. If not, check the Services tab for the phone in Vista's BT manager applet, it may need to be ticked in there.
I use BlueTooth with WMDC all the time with my Diamond and it was as simple as pairing then going into ActiveSync on the phone and selecting Connect via Bluetooth.
I´m not sure what bluetooth stack I´m using. I think it´s Toshibas but how can I check that?
I had to install Toshibas application to get the drivers for my bluetooth device and I think a got the stack at the same time.
Is there a way to shift stack if I use Toshibas instead of Vistas default?
Please take a look at the attachement to see my gui for bluetooth, and the Center for MobileDevices (Instead of Active sync) on my Vista machine, and what happens when I connect my Diamond through Bluetooth. Sorry about the language but it tries to install the Diamond as a Bluetooth modem and that´s the only thing I seems to be able to install.
So i have installed Athine lite, PDACornerUltimate.V17, and HyperDragon IV. Athine lite and PDA v17 are both based on WM 6.5 and i can not get WM remote desktop to work it just hangs @ connecting with no error messages. Hyperdragon based on 6.1, RD works just fine.
Any1 have a solution to get this working on v6.5? i have installed Mocha Remote Client and Terminal Services 2002 and both of those work just fine on WM6.5, but i really want to be able to map my device to the machine.
im currently running Athine lite as its fast and clean.
would you mind explaining how you got it to work the first time? im a little confused about the domain and ip address and such
so what is no one having a problem with this?
same problem here, just sitting on connect...
And there's no traffic since HSDPA doesn't kick in (switching between H and 3G symbol).
I've been trying Anryl's latest ROM's. 21202 rev 8 or 9 had RDP as part of the ROM at that connected ok.
I've just upgraded to his 21500 rev 5 and RDP is not embedded so installed from the .cab I used with WM6.1 and I get the hang at 'connecting' problem.
Don't really want to downgrade but may have to...
Same here. It worked with 6.1 but I install the same cab on 6.5 (Tai BlueCalm ROM) and it just hangs when trying to connect. I can't figure it out.
I found this link in XDA Developers and it works now for WM6.5.
http://forum.xda-developers.com/showthread.php?p=3592033
Was anyone able to establish a connection with this version of rdp 6.5? I only get connection errors when I try to connect to my Vista SP 2 System (works from any Windows XP and Vista device, so its no issue with my pc).
TyTN II & WinXPpro Remote Desktop connection without router or internet
Hello Everyone, forgive me if this question sound stupid but
I need to remote control my laptop using TyTN II Winmo6.1
1. I have installed WM6_RDP on winmo
2. I dont have router or any other intermediate communicating device.
3. Laptop & Mobile both Wifi capable.
can i use wifi capability of both devices and communicate between them. like ad hoc in windows XP
IF this is possible,
1. can you please tell me settings on winXP pro machine and what needs to be installed
2. Using Remote desktop on winmo how can i connect - settings please in winmo.
baseline: I need Remote desktop running on winmo over wifi with just one laptop and without router or modem
thanx in advance
sarang.hanwante said:
Hello Everyone, forgive me if this question sound stupid but
I need to remote control my laptop using TyTN II Winmo6.1
1. I have installed WM6_RDP on winmo
2. I dont have router or any other intermediate communicating device.
3. Laptop & Mobile both Wifi capable.
can i use wifi capability of both devices and communicate between them. like ad hoc in windows XP
IF this is possible,
1. can you please tell me settings on winXP pro machine and what needs to be installed
2. Using Remote desktop on winmo how can i connect - settings please in winmo.
baseline: I need Remote desktop running on winmo over wifi with just one laptop and without router or modem
thanx in advance
Click to expand...
Click to collapse
Yes you can with an ad-hoc connection. You'll have to google it though, as no one can tell you the exact details for your network as you will have to use an internal IP address. Start by googling how to use the "ipconfig" command in dos, as that's a good way to find out internal addresses quickly.
Start here:
http://www.microsoft.com/windowsxp/using/networking/setup/adhoc.mspx
Thanx for Reply Stuntdouble, but need more info
Thanx for reply stuntdouble but i need some more info regarding the same.
1. Link u have forwarded - I have already did before made a adhoc connection on my laptop and connected it from my winmo.
2. winmo cannot connect thru wireless though when connected thru USB get working fine.
3. I cannot even see a different machine other than my own PC in network neighbourhood.
4. I have installed Network access from HTC but it also dont show any computer in LAN conected while connected on adhoc.
please reply if this could be sorted.
thanx in advance.
Sounds like there's a firewall blocking the connection on your pc.
Hi guys, I have been trying to get my XDA to go online THROUGH my desktop computer via bluetooth. PAN.
Sadly, I am having ZERO luck!
On the desktop side, I was using the Toshibia bluetooth stack, I have also tested using the default Microsoft bluetooth stack.
On the XDA side, I tried and failed using WM 6.1 and the default stack, I then upgraded to 6.5 (Which is pretty sweet) and could not get the default stack to work via PAN either. I also installed Widcomm Bluetooth stack which provides much more output than the MS one.
After using the Widcomm drivers, I am getting the impression that my desktop is not offering the PAN service, but I am a little bit confused as to why.
If someone, could provide me with some current and up to date pointers (Please do not link me to random wiki pages made in 2005 - Its all changed!) I would be thankful!
Well I'm just trying the same with an old Wizard and it seems the possibility to share internet FROM Desktop TO Windows mobile has been removed... since WM6.
==> The option "Join a network" is missing from WM6... wich is weird since the bluetooth pan driver can still be configurer under "Parameters/System/Connections/WIFI/Network Card"
If Anyone knows how to figure this out : I've read more than 30 posts of people looking to share internet this way around with no success...
whereas you've got out of date pages explaining how to do it under windows mobile 2003 !
Need drivers
on my pc setting up a new connections gets stuck when i choose the device. there it shows my device but wn i select connect>access point i get some error tat the device is allready connected to another device but im sure its not.
on the phone when i set up a new modem settings
after select device, it comes to the partnership settings where only option is active sync. i think with some driver we may be able to get a internet setting here.
Hello,
I have smart bluetooth keyboard KB600 (about four years old) and I'm looking for driver for my HD2, any idea?
Thank you.
did you try pairing it directly without a bt driver?
Pairing HD2 and bluetooth keyboard
I am trying to pair the same device: My HD2 finds the keyboard, and is able to connect via SPP slave. But I am not able to type anything? ... anybody? I am using a COM2 port for the connection, and the HD2 is "always visible", I have no clue why it's not responding! ANY help is appreciated
Same problem here............ PLEEase help
HTC HD2 and BK600 COM ONE/OMIZ/FREEDOM bt keyboard issue
Hi,
first, accept apologies, because i repost a message posted in the wrong thread (same problem, but not same phone)
Home \ HTC Diamond: Touch Diamond, MDA Compact IV \ Touch Diamond, MDA Compact IV Accessories \ Bluetooth Keyboard BK600 problem
anyway, they explain that my com one bk600 is the same than omiz and freedom KB600. So, i've tested 2 drivers
1) Installing omiz one, it proposes me several choices (my model is not in it), but i've used to have this installer (older version) work for my old acer n50 and my pharos. I guess i've to choose a model with arm and widcomm bt.
No success, it seems that the software installed, but the application claims it's not a valid ppc applicaiton (strange because it worked one time and fails saying that there is not enough memory when clicking activate)
2) i've tested the freedom universal keyboard (second choice)
The driver installs perfectly; on the htc hd2 side i've paired the devica and grant connexions (the wizard report that the device is connected and the keyboard double green blink -- thats mean it's ok ) , but when i go to program files freedom utility and start it and click on connect, it claim that the device is not paired.
here where i'm. To bad, because having it works onACER n50 and HTC pharos.
Quoting another user, to pay $80 for 3 years lifetime...
Any ideas ???
Best regards,
Ludovic.
got the same problem. (BK600 and HD2)
Any success yet?
got the same problem here. i tried many drivers i found on the internet, none worked for me
next step is: i try to find a universal driver that can select a com-port manually to link with the bluetooth comport. maybe some infrareddriver can do this, because infrared also uses com-ports.
the problem is, the drivers are for microsoft bluetooth stacks and i.e. a hd2 uses broadcom as far as i know.
i hope anyone can find a solution
SPP keyboards do not work for WM builds 6 and over. This problem has existed for years and no one has found a solution.
I suggest you ditch the SPP keyboard and go with one that supports a HID profile.
Hi guys,
I had the BK600 keyboard and found these drivers to work:
It installs the proper program and works only through the programs. Do not bother trying to pair it with WM settings.
This also works on Symbian. I attached the files for you to test.
I am wondering whether there is an Android version that I can use with my HD2?
I was able to get the freedom BK600 keyboard working succesfully with my old windows mobile 6.1 Treo 800w phone. I found your WinCE.zip (30.0 KB) driver worked best with windows mobile 6.1. It places an executable called BTKeybd under the programs menu.
For Android users, please use Key Pro by Mobile Gears. It is the only SPP bluetooth enabled app that I can find. Works perfectly with my Android.