I have a g920t that is not booting up (since i tried to put on the metro 5.1.1).. i have tried odin flashing different samsung firmwares (has to be 5.1.1 as i updated bootloader). i have also installed twrp 2.8.7.0. and tried to put on ozop which loads witha splash screen of m choosing during rom setup but on first boot gets to starting apps and stays (i left on for over 24hrs) and upon reboot it just stays on the splash screen..
I would really like some help to revive this phone. thanks for any options.
Related
EDIT: Can be closed, fixed it by going into recovery and wiping data/cache, never had to do that before in other flashes so didn't know it was needed
Hi guys,
first of all I'm not another first time flasher, I already succesfully put 4 other roms on my galaxy s but now I don't know what to do..
I came from jm5 and wanted to upgrade to jm8 today so I back upped everything and started the process, I thought I'd best follow richthoven's instructions so I first flashed the pit file + repartition, and then after pass, removed battery, back to download mode and put pda,modem,csc etc like always and started flashing.
Now my problem is from what I remember after the final reboot before odin sais pass the s logo dissapears and the phone boots into touchwiz, but now after the s logo dissappeared, my screen just stays black and after a minute or two odin sais passed, but there's nothing on my screen, and even after disconnecting and removing battery and try to boot it hangs on the s logo for a few minutes then a black screen with the backlight buttons highlighted.
Any help here would be greatly appreciated!
PS: I already tried the flashing procedure twice, same result
Hey,
I had the cm9 on my I9001, now i want to have the stock rom, i downloaded the Stock rom, ArriesVE.ops, and Odin.
Than i flashed the ROM on my phone, after this was done, it restarts, i can see the White Samsung Logo , after this i see the "Samsung Galaxy S Plus" Logo, this logo stays for a few seconds and than my phone restarts again and all repeats..
What should I do
Maybe this would help you http://broodplank.net/old/flashsamsungi9001.php
Same Thing...
Gnampf7 .. did u find a way past that.... have been stuck @ de same point whole day now... flashed the stock ROM thrice... cleared cache... cant do a factory reset thou... its asking for a passcode i dont have.
any ideas??
Bootloop on i9001
Hi guys, i gonna tell you about how my i9001 was stuck in a bootloop. Maybe you could help me. I'm sick of it.
Cause: I installed cm10 and cwm5 or 6 as recovery and upgrade my device by using Ota Updater. When I restarted my i9001, it got stuck in a bootloop.
What my i9001 can display: It can access to rampdump mode and download mode. In case I try to turn on my i9001 or access to recovery mode the Samsung logo is shown twice. It often gets stuck showing the typical grey battery flat (with a loading stopped) and the black screen alternately.
Attempts: i've tried everything except for the right solution. Lots of forum threads and nothing works for me. I've tried:
1.- Boot_loader for device boot.
2.- I've flashed an stock rom: XXKQP, and 2 more: BVKPC y XXKQ1. Each one are official.
3.- And then recovery-clockwork-5.5.0.4 and -6.0.1.2.
4.- I've tried, then, flashing feamodrecovery 1.2.
5.- Nothing works for me.
I've been using Odin 4.43. AriesVE in OPS section and when flashing these roms: one package. For recovery packeges: one package and pda (I tried these two options).
I can't reach at recovery mode. Any help would be greatly appreciated. Greetings!
http://forum.xda-developers.com/showpost.php?p=51290392&postcount=13
Last night I started messing with the S5, I used Odin to restore to stock, then took all the OTA updates all the way to the 4.4.4 one that came out recently and after that I debloated it and removed the att apps and such, everything was fine. I tried changing the boot animation but messed up somewhere along the way and it wouldn't show a boot animation at all but still booted and got to the main screen and functioned perfectly. I decided to start over and tried to use Odin to restore to stock 4.4.2 but after flashing the first screen comes on and says that it's custom and has the open lock symbol then shows a slow and laggy samsung boot animation before freezing at some point on the animation and the screen goes completely black but the blue LED light stays on and it does nothing after that. I have tried using Odin repeatedly and erasing everything through recovery and nothing works. Please, any help would be appreciated.
It has been fixed I believe, I flashed the G900A_OA1_Stock_Kernel.tar.md5 and it works again.
Where did you get the .tar.md5 file? I think I just bricked myself out of recovery mode
Hi everyone.
I've android 6 stock (xt1068), and today i woke up and it doesn't work
I try to install the twrp and then to flash rom, ecc, but after that i install the twrp succesfully, when i go in the recovery i see that there is no twrp but the main stock recovery. This thing basically appens with everything that i install/wipe, infact the bootloader tells me that my action worked, but it didn't.
Another thing is that if i let my phone boot up, after the boot animation it tells me 'Starting Android', then this text go out, and for a second the boot animation appears again, after that all the screen goes black. (The phone is not closed, but it is showing black in the screen, i think you got it)
Thank you
Hello everyone I have a problem with my Galaxy s5 G900A (AT&T) his booting but the screen is black but before that happens I did some manipulation on it I will give you the time line of what did happen and I hope that someone could have the answer to may issue (Sorry for my English)
1) My phone was running normally until one day where he turned off and was stuck in boot loop but after some hours he turned on and worked normally and that did happen a lot of time.
2) One day the same thing happened but this time it was really stuck in Boot Loop for days so I decided to flash a new ROM using Odin so I did download this ROM “G900AUCS4DPH3”
3) I flashed the ROM using Odin but that didn't change anything.
4) I tried to flash another ROM “G900AUCS4CPA2” a lollipop ROM after that the phone was still stuck on the boot loop but after some time he did boot but the screen was black so I tried to take off the battery and pushed the lock button for 1, 2 and 5 minutes but in vine that didn't change anything (note: when I tried to access the recovery mode the phone was rebooting but I could access the download mode and the screen was turning on so it wasn't a screen problem)
5) After this I tried to flash the same ROM but by enabling the flash boot loader option in Odin then the phone did run but the screen was black and the boot loop problem was gone and when I tried to access the download mode sometimes it was working but the screen was black and sometimes the phone was rebooting (I felt the vibration) so I decide to use 300K tool (it a software that put the phone in download mode just by plugging it to your computer).
6) After all this I tried a lot of other roms but the problem was steel the same.
7) I tried to flash the roms with a pit file but it didn't change anything.
So now the screen is always black but the is booting normally I don’t know what to do help me please.
List off roms that I tried:
Android 6: G900AUCS4DPH4
G900AUCS4DPH3
Android 5: G900AUCS4CPA2
Android 4: G900AUCU1ANCE
G900AUCU2AND3
Note: when I try to flash Android KitKat roms Odin shows me an error message.
Odin versions that I used:
Odin3 v3.12.3
Odin3 v3.09
Odin3 v3.07