Hello everyone I have a problem with my Galaxy s5 G900A (AT&T) his booting but the screen is black but before that happens I did some manipulation on it I will give you the time line of what did happen and I hope that someone could have the answer to may issue (Sorry for my English)
1) My phone was running normally until one day where he turned off and was stuck in boot loop but after some hours he turned on and worked normally and that did happen a lot of time.
2) One day the same thing happened but this time it was really stuck in Boot Loop for days so I decided to flash a new ROM using Odin so I did download this ROM “G900AUCS4DPH3”
3) I flashed the ROM using Odin but that didn't change anything.
4) I tried to flash another ROM “G900AUCS4CPA2” a lollipop ROM after that the phone was still stuck on the boot loop but after some time he did boot but the screen was black so I tried to take off the battery and pushed the lock button for 1, 2 and 5 minutes but in vine that didn't change anything (note: when I tried to access the recovery mode the phone was rebooting but I could access the download mode and the screen was turning on so it wasn't a screen problem)
5) After this I tried to flash the same ROM but by enabling the flash boot loader option in Odin then the phone did run but the screen was black and the boot loop problem was gone and when I tried to access the download mode sometimes it was working but the screen was black and sometimes the phone was rebooting (I felt the vibration) so I decide to use 300K tool (it a software that put the phone in download mode just by plugging it to your computer).
6) After all this I tried a lot of other roms but the problem was steel the same.
7) I tried to flash the roms with a pit file but it didn't change anything.
So now the screen is always black but the is booting normally I don’t know what to do help me please.
List off roms that I tried:
Android 6: G900AUCS4DPH4
G900AUCS4DPH3
Android 5: G900AUCS4CPA2
Android 4: G900AUCU1ANCE
G900AUCU2AND3
Note: when I try to flash Android KitKat roms Odin shows me an error message.
Odin versions that I used:
Odin3 v3.12.3
Odin3 v3.09
Odin3 v3.07
Related
EDIT: Can be closed, fixed it by going into recovery and wiping data/cache, never had to do that before in other flashes so didn't know it was needed
Hi guys,
first of all I'm not another first time flasher, I already succesfully put 4 other roms on my galaxy s but now I don't know what to do..
I came from jm5 and wanted to upgrade to jm8 today so I back upped everything and started the process, I thought I'd best follow richthoven's instructions so I first flashed the pit file + repartition, and then after pass, removed battery, back to download mode and put pda,modem,csc etc like always and started flashing.
Now my problem is from what I remember after the final reboot before odin sais pass the s logo dissapears and the phone boots into touchwiz, but now after the s logo dissappeared, my screen just stays black and after a minute or two odin sais passed, but there's nothing on my screen, and even after disconnecting and removing battery and try to boot it hangs on the s logo for a few minutes then a black screen with the backlight buttons highlighted.
Any help here would be greatly appreciated!
PS: I already tried the flashing procedure twice, same result
Hey,
I had the cm9 on my I9001, now i want to have the stock rom, i downloaded the Stock rom, ArriesVE.ops, and Odin.
Than i flashed the ROM on my phone, after this was done, it restarts, i can see the White Samsung Logo , after this i see the "Samsung Galaxy S Plus" Logo, this logo stays for a few seconds and than my phone restarts again and all repeats..
What should I do
Maybe this would help you http://broodplank.net/old/flashsamsungi9001.php
Same Thing...
Gnampf7 .. did u find a way past that.... have been stuck @ de same point whole day now... flashed the stock ROM thrice... cleared cache... cant do a factory reset thou... its asking for a passcode i dont have.
any ideas??
Bootloop on i9001
Hi guys, i gonna tell you about how my i9001 was stuck in a bootloop. Maybe you could help me. I'm sick of it.
Cause: I installed cm10 and cwm5 or 6 as recovery and upgrade my device by using Ota Updater. When I restarted my i9001, it got stuck in a bootloop.
What my i9001 can display: It can access to rampdump mode and download mode. In case I try to turn on my i9001 or access to recovery mode the Samsung logo is shown twice. It often gets stuck showing the typical grey battery flat (with a loading stopped) and the black screen alternately.
Attempts: i've tried everything except for the right solution. Lots of forum threads and nothing works for me. I've tried:
1.- Boot_loader for device boot.
2.- I've flashed an stock rom: XXKQP, and 2 more: BVKPC y XXKQ1. Each one are official.
3.- And then recovery-clockwork-5.5.0.4 and -6.0.1.2.
4.- I've tried, then, flashing feamodrecovery 1.2.
5.- Nothing works for me.
I've been using Odin 4.43. AriesVE in OPS section and when flashing these roms: one package. For recovery packeges: one package and pda (I tried these two options).
I can't reach at recovery mode. Any help would be greatly appreciated. Greetings!
http://forum.xda-developers.com/showpost.php?p=51290392&postcount=13
Hey guys, my phone got totally stuck on a Samsung logo (neverending loop).
Yesterday I let my bro play an Angry Birds on my phone. After a while I took my phone back and to my surprise it wasn't responding. Mobile was turned on (connected to the charger) but all I could see was a black screen. I tried restarting my phone by removing battery but it didn't help at all. I got stuck at Cyanogen Mod logo everytime. Since I haven't updated my firmware in a while I decided to intstall the newest version of CM (KitKat 4.4.4 from novafusion.pl) using Odin app. After a successful installation my phone still didn't boot up, I was getting stuck on a blue CM logo. After this I wanted to wipe my cache/dalvik cache but I wasn't able to get into recovery mode (getting stuck on a TeamWin screen). Reinstalling TWRP and installing ClockWork recovery didn't have any effect. I wiped my phone using .tar file found on this forums, tried reinstalling my ROM recovery many times, tried installing param file (don't even know what's that) and resetting three button combination using Benzonat0r's mod. None of these things seemed to have any impact. I'm still not able to get into recovery neither boot my phone up - Samsung logo bootloop. What am I supposed to do to unbrick my phone?
On a side note my knowledge about Android phones is tiny so please consider this. Also forgive me my poor grammar, not a native English speaker here.
Guskax said:
Hey guys, my phone got totally stuck on a Samsung logo (neverending loop).
Yesterday I let my bro play an Angry Birds on my phone. After a while I took my phone back and to my surprise it wasn't responding. Mobile was turned on (connected to the charger) but all I could see was a black screen. I tried restarting my phone by removing battery but it didn't help at all. I got stuck at Cyanogen Mod logo everytime. Since I haven't updated my firmware in a while I decided to intstall the newest version of CM (KitKat 4.4.4 from novafusion.pl) using Odin app. After a successful installation my phone still didn't boot up, I was getting stuck on a blue CM logo. After this I wanted to wipe my cache/dalvik cache but I wasn't able to get into recovery mode (getting stuck on a TeamWin screen). Reinstalling TWRP and installing ClockWork recovery didn't have any effect. I wiped my phone using .tar file found on this forums, tried reinstalling my ROM recovery many times, tried installing param file (don't even know what's that) and resetting three button combination using Benzonat0r's mod. None of these things seemed to have any impact. I'm still not able to get into recovery neither boot my phone up - Samsung logo bootloop. What am I supposed to do to unbrick my phone?
On a side note my knowledge about Android phones is tiny so please consider this. Also forgive me my poor grammar, not a native English speaker here.
Click to expand...
Click to collapse
Download This rom "I8190 серв. укр.rar" from here
Unpack .rar and open Odin.
Select the goldenxx.pit to [PIT]
Select CODE_I8190XXAMA2_809600_REV00_user_low_ship.tar.md 5 to [PDA]
Select CSC_QXE_I8190QXEAMA1_20130109.163004_REV00_user_lo w_ship.tar.md5 to [CSC]
Put your phone in download-mode and connect it to computer.
Hit [Start] when device is detected by Odin.
You will end up with a "La'Fleur" branded phone, but no worries!
Just go to download mode again and flash a custom recovery and after that a ROM of your choice.
The three button combo will still work!!
This is not my work, give my friend @tyson a thanks for that!
I tried installing stock recovery and ROM. After completed installation I finally managed to pass Samsung screen. I got to the something like Android installation screen and my phone suddenly shut down. Now it's totally bricked, I can't turn it on nor get into the download mode. Charging progress doesn't show up while phone is plugged in neither. Any help?
moonryder said:
Download This rom "I8190 серв. укр.rar" from
Unpack .rar and open Odin.
Select the goldenxx.pit to [PIT]
Select CODE_I8190XXAMA2_809600_REV00_user_low_ship.tar.md 5 to [PDA]
Select CSC_QXE_I8190QXEAMA1_20130109.163004_REV00_user_lo w_ship.tar.md5 to [CSC]
Put your phone in download-mode and connect it to computer.
Hit [Start] when device is detected by Odin.
You will end up with a "La'Fleur" branded phone, but no worries!
Just go to download mode again and flash a custom recovery and after that a ROM of your choice.
The three button combo will still work!!
This is not my work, give my friend @tyson a thanks for that!
Click to expand...
Click to collapse
Hey dude, I wish I saw your reply earlier. If my phone wasn't bricked now I'd give it a shot.
Hello,
I have a GT-N7000 which I am only able to access via download mode. Recovery mode does not work at all.
Odin 3.09 runs the following successfully:
1. Flashing a stock rom: N7000JPLSB_N7000OJPLSB_N7000XXLSO_HOME.tar.md5
2. Flashing a pit file: Q1_20110914_16GB.pit
3. Flashing a safe kernel: PhilZ-cwm6-JPLSB-UAE-4.89.4.tar.md5
These steps however have not solved the problem.
I have read that I need to flash a bootloader, but I don't know how to do that.
Any help would be highly appreciated.
GT2020 said:
Hello,
I have a GT-N7000 which I am only able to access via download mode. Recovery mode does not work at all.
Odin 3.09 runs the following successfully:
1. Flashing a stock rom: N7000JPLSB_N7000OJPLSB_N7000XXLSO_HOME.tar.md5
2. Flashing a pit file: Q1_20110914_16GB.pit
3. Flashing a safe kernel: PhilZ-cwm6-JPLSB-UAE-4.89.4.tar.md5
These steps however have not solved the problem.
I have read that I need to flash a bootloader, but I don't know how to do that.
Any help would be highly appreciated.
Click to expand...
Click to collapse
On a successful kernel flash, enter into recovery mode and flash raw kernel and its corresponding rom.
Unfortunately recovery does not work at all. The phone reboots when I attempt to enter recovery.
GT2020 said:
Unfortunately recovery does not work at all. The phone reboots when I attempt to enter recovery.
Click to expand...
Click to collapse
My phone has this thing where upon pressing the buttons for recovery, it will show the Samsung Galaxy Note screen twice before entering recovery. That means pressing the buttons until it finishes showing twice, or it will just reboots normally. Did you try it?
What I tried now was flashing the stock rom again. After Odin successfully flashed the rom, it went into a boot loop that lasted approximately 20 minutes, but I just let it loop without disturbing it. Eventually it stopped and switched itself off.
I tried to enter recovery and and it rebooted a few times as you mentioned, but eventually I now see the stock Recovery screen, but the Android is on his back with the red triangle on his chest.
I then performed a factory reset.
Phone reboots, I see the Samsung logo, I hear the jingle and then the phone switches off.
Edit:
Switch phone on: See message Android is upgrading. Reaches 33 of 73 apps and phone switches off.
Switch on again: Android is upgrading 1 of 41. Completes. Switches off.
Switch on again: See setup screen. Switches off.
Switch on again: Same thing.
Recovery still broken and can't setup phone as it switches itself off.
GT2020 said:
What I tried now was flashing the stock rom again. After Odin successfully flashed the rom, it went into a boot loop that lasted approximately 20 minutes, but I just let it loop without disturbing it. Eventually it stopped and switched itself off.
I tried to enter recovery and and it rebooted a few times as you mentioned, but eventually I now see the stock Recovery screen, but the Android is on his back with the red triangle on his chest.
I then performed a factory reset.
Phone reboots, I see the Samsung logo, I hear the jingle and then the phone switches off.
Edit:
Switch phone on: See message Android is upgrading. Reaches 33 of 73 apps and phone switches off.
Switch on again: Android is upgrading 1 of 41. Completes. Switches off.
Switch on again: See setup screen. Switches off.
Switch on again: Same thing.
Recovery still broken and can't setup phone as it switches itself off.
Click to expand...
Click to collapse
You need the stock recovery. Flash your rom in, reboot to stock recovery, then update with the corresponding Philz for your phone. If it works you should reboot and see philz recovery and your rom is unusable. Just flash raw kernel and any other rom after that
So all the random reboots were caused by a faulty battery.
I bought a new battery, followed steps 1,2 and 3 in my original post and my phone is working perfectly again.
I recently got a new ATT galaxy s5 (G900A). Upon setting it up, I used OTA to take it from stock to the latest version which was 5.1.1 I believe.
I then failed to do thorough research and attempted to downgrade it to 4.4.2 which started causing problems.
I retracted my actions in chronological order to help in troubleshooting this situation:
Upgraded via OTA to 5.1.1
used odin 3.10.7 in AP mode with file "AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5"
Odin reported a failure after a few moments of me pressing the "start" button. for the above AP file. On the phone's screen (whilst in download mode) , it showed the progress bar as not being completed and also not progressing after Odin Failed. I had to pull battery to restart the phone.
restarted phone and it threw a splash screen saying to use kies recovery due to a firmware error.
entered download mode, used odin in AP mode to flash "G900A_OC4_Stock_Partitions.tar.md5"
phone rebooted and hung on Samsung Galaxy S5 logo
entered recovery mode (vol up, home, power) to reset the cache, still hung up on samsung logo
entered recovery mode again to do factory reset/wipe, still hung on samsung logo
pulled battery, used odin in AP mode to flash file "G900A_OC4_Stock_Kernel.tar.md5"
phone rebooted and hung on Samsung Galaxy S5 logo
I did quite a bit of searching around and have employed a few attempts at fixing the issue as listed above. I am still hanging on the Samsung logo though.
Could anyone offer me some insight on how to go about resolving this situation?
Thanks for your time!
guy2020 said:
I recently got a new ATT galaxy s5 (G900A). Upon setting it up, I used OTA to take it from stock to the latest version which was 5.1.1 I believe.
I then failed to do thorough research and attempted to downgrade it to 4.4.2 which started causing problems.
I retracted my actions in chronological order to help in troubleshooting this situation:
Upgraded via OTA to 5.1.1
used odin 3.10.7 in AP mode with file "AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5"
Odin reported a failure after a few moments of me pressing the "start" button. for the above AP file. On the phone's screen (whilst in download mode) , it showed the progress bar as not being completed and also not progressing after Odin Failed. I had to pull battery to restart the phone.
restarted phone and it threw a splash screen saying to use kies recovery due to a firmware error.
entered download mode, used odin in AP mode to flash "G900A_OC4_Stock_Partitions.tar.md5"
phone rebooted and hung on Samsung Galaxy S5 logo
entered recovery mode (vol up, home, power) to reset the cache, still hung up on samsung logo
entered recovery mode again to do factory reset/wipe, still hung on samsung logo
pulled battery, used odin in AP mode to flash file "G900A_OC4_Stock_Kernel.tar.md5"
phone rebooted and hung on Samsung Galaxy S5 logo
I did quite a bit of searching around and have employed a few attempts at fixing the issue as listed above. I am still hanging on the Samsung logo though.
Could anyone offer me some insight on how to go about resolving this situation?
Thanks for your time!
Click to expand...
Click to collapse
Same problem here. Really need a solution
Jsorren said:
Same problem here. Really need a solution
Click to expand...
Click to collapse
Totally ran into exactly the same issue...I am trying to sort out the details of it today and will post up what I find...I believe the answer lies somewhere in getting back to stock OF3 firmware + OF3 kernel without root via ODIN .tar file but we shall see. Also ..I am currently running ODIN v3.09
Get the phone up and running
Ok this is what I did to get my phone back up and running,
What happened was I did what it said on the downgrade thread here on xda, it didn't work. But of course it left my phone stuck on download mode.
I used a program from z3x to download the pit file, that usually takes it out of download mode. Then I booted into recovery, I had the 4.2 recovery on a 5.0 rom.
So I was stuck un bootloop, but there is a way to get it out.
downloaded the update and sent it with adb sideload.
so in other words
things you need
1. easy adb http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
2. update file for S5, from my google drive http://*******/1TjDwb
Steps I took
1. go to recovery mode by booting with volume up + home + power
2. select apply update from adb
3. install easy adb http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
4. go into any command shell ( cmd or windows powershell) and send the file by adb
in my case it was "adb sideload 2400258.cfg"
5. wait for the phone to apply the update and restart.
I have a long browsing history (about 7 devices and various browsers), I don't really have time to look up the thread I got the update from.