How to get back to stock from android 5.1 - Galaxy S I9000 Q&A, Help & Troubleshooting

hello, I tried to return to the android 2.3.3 from android 5.1 using Odin, however I failed and whenever I turn on my S1 it shows the icon of connect you phone to pc, I can access download mode yet not the recovery mod, please help me (my dad want to use the phone and android 5.1 wasn't easy or stable for him)
Thank you guys.

You need to try and flash again using ODIN while under download mode. Is there a specific error message that pops up? Did you make sure all files in the stock ROM has been selected in the right categories?
gsstudios

icon of connect you phone to pc this means u bricked your device so only it shows icon like this so no pbm just try to connect your USB cable to system as like before u use odin(Turn off device->Connect one edge of USB in system-> then long press button combo along with usb Cable inserted) Again it "shows icon of connect you phone to pc"
but the device will be connected to system and check odin yellow color glows means no pbm flash stock if not means try USB jig

Related

[Q] i9000 not booting any more

Hello,
I have been using some release candidates of ICS which were available here on my i9000. Everything worked out generally fine. Sometimes my phone crashed and then it wouldn't want to go further than my i9000 and afterwards the google screen. Both screens would just repeat endlessly without the phone doing anything.
When this happened, I was always able to go back to recovery mode and uninstall everything and reinstall the rom. This would always solve my problem.
Now here is my current issue: on Saturday my phone crashed again, but now I can NOT enter recovery mode any more. Whenever I plug in a usb cable or normal cable to charge my phone it shows the calculating sign and after a few secs it's gone and starts all over again instead of showing the green battery slowly getting full.
The only thing which works is getting into download mode. So I tried to get odin to work. I installed kies to get the usb drivers and I opened odin (on both windows and a mac), but it does NOTHING.
Is there any other way I can reset my phone to get it somehow working again? Is there another way to get into recovery besides the buttons or using odin? I know of ADB but that requires the phone to be on....
When you plug your phone in (and enter download mode) what device type does windows detect it as?
Because you can get to download mode normally a "good" sign that it isn't bricked (and even when "bricked" it can be un-bricked)
Edit
Just tested mine, entered download mode and odin shows it connected on Com6, device manager shows it connected as a "Samsung Mobile Modem"
try and install the samsung modem drivers separately then try and connect connect
Hi,
first, be sure that all Kies-services are disabled via Taskmanager otherwise ODIN wont work correct!
then Bring your SGS1 to the Downloadmode, connect the USB_cable at the phone.
fullfill all sections you need in ODIN (PDA-Kernle, CODE-modem, CSC-CSC, pitfile512) klick repartition on
then connect your SGS1 via USB to the PC
Odin will show "connected"
Press start.
http://www.youtube.com/watch?v=1RoZU5ZPMS4
if your still stuck checkout this video might help good luck

[Q] Windows shows 'unknown device' in Download mode..

This is probably getting boring to some people now but i am having a major issue with Odin detecting my phone when it is in Download mode.
Once i connect the phone after loading up Odin and holding the 3 button combo, Windows installs 2 more drivers - USB Device and then Unknown Device. Then nothing, Odin just sits there and no yellow box glows or a COM port showing the phone is connected. I have tried installing Kies originally and using the drivers from that with no success, then i used the standalone driver packages available from softpedia and several other websites with no luck. What i can't understand is, when i connect the phone to my computer in it's normal state it has no problems and allows me to transfer files, access both the internal and external SD but shows as an 'unknown device' in the Device Manager when in Download mode... Why??!!
Somebody please help me!
Which rom are you using?
Also did you try this on some other PC/Laptop?
ishangoyal said:
Which rom are you using?
Click to expand...
Click to collapse
I'm on an Orange stock rom, here's some of my phone details -
PDA: I9000BVJVC
PHONE: I9000BVJV3
CSC: I9000ORAJV6
ishangoyal said:
Also did you try this on some other PC/Laptop?
Click to expand...
Click to collapse
I have not tried it on a different computer yet, not sure if i need to considering it connects normally when the phone is on, just not in Download mode... I really don't know what's going on!!
N8tR1X said:
I'm on an Orange stock rom, here's some of my phone details -
PDA: I9000BVJVC
PHONE: I9000BVJV3
CSC: I9000ORAJV6
I have not tried it on a different computer yet, not sure if i need to considering it connects normally when the phone is on, just not in Download mode... I really don't know what's going on!!
Click to expand...
Click to collapse
Stock rom shouldn't have this problem.. you should either uninstall everything related to samsung from your computer and then start again or try connecting to a different PC.. you'll be able to find out whether this problem is just with the single system or not
I always run up Odin, then use the 3 buttons to get to download mode and then connect to USB port.
Sent from my GT-I9000 using XDA
I had the same problem, then I finally got it to work.
Try this:
First off, you may need to try several different versions of Odin. The one I finally got to work on my phone was V1.85. you can find a collection of different versions to download here: http://droidangel.blogspot.com/2011/05/odin-multi-downloader-flasher-program.html
Next, Load up Odin. Plug in you phone to the USB port with phone powered on, remove the battery on the phone. While holding the 3 buttons down (Volume up, down & power) put the battery back in. Wait for the text to start to scroll, let go of the buttons. When it gets to the menu, unplug the USB, then plug back in. The yellow box in Odin should say it's connected. If not you may have to do this a couple of times.
Now this is the part I can't remember...I think what I did from here is chose the recovery option in the menu. Sorry I don't remember exactly what i did, I was a noob when I did it, and I think I got lucky.
I do remember that Odin would not flash it until I finally got to the screen with the picture of the android in the construction hat, or something like that.
Maybe someone with more experience can help with this part.
I had the same problem
The fix is: Use the USB JIG to get into download mode.
Update your PC USB driver for SGS1. Follow the OP on this link:
http://forum.xda-developers.com/showthread.php?p=35227656
Device: GT-i9000
Rom: JB 4.2.1 Vanilla Rootbox v0.0.2
Gapps +..: JusTunBean Inverted
Kernel: Mackay 0.244

Solution: Recovering from soft brick

I faced a unique problem today...
1. Got a notification to update Super Su
2. After updating, went to the app and it asked for updating binary...clicked Ok
3. Asked which method to use- Normal or CWM/TWRP...clicked CWM/TWRP
And all hell broke loose...the phone rebooted and kept stuck at Samsung GT-N7000 screen
Tried booting into recovery using the Vol Up+Menu+Power Button but failed to boot into recovery and always booted in the same GT N7000 screen
In short my custom recovery was messed up...
The above may not be a huge problem for people frequenting these forums and having basic google search finesse, but still it took me more than 3 hours to un-brick my phone after trying several combinations and permutations, so to the benefit of other members here's my simple solution:
1. Check if you can get into download mode by using Volume Down+Menu+Power Button
2. If not, your problem might be more serious and you should keep searching for a solution...best of luck!
3. If you can get into download mode, fine ...lets continue...
4. Prepare your PC for flashing a custom recovery via PC Odin:
a. Download PC Odin: I used Odin 3 V 1.85
b. Download a custom recovery: I used Philz 5.03
c. Uninstall Kies and Samsung Drivers from your PC (do it, it worked for me!)
d. Install latest Samsung Drivers afresh
e. Eject and physically remove all USB connected devices from your PC
f. Disable any antivirus software
5. Now get to download mode on your handset- after Volume Down+Menu+Power Button- on the next screen press Vol Up key to enable download mode. Do not connect phone to PC yet.
6. Run Odin as administrator. Let the app window come up on your screen.
7. Connect the original Samsung USB cable to the USB port at the back of your PC- this is to ensure it gets connected to the motherboard USB slot directly- please do this- critically important- at least in my case. For a laptop, I guess any port will do.
8. Connect your phone to the PC using USB cable
9. The ID:COM indicator on the PC ODIN window should turn yellow in a few minutes
10. Do not click on any buttons on ODIN Window- Auto-Reboot and F.Reset Timer should be checked and everything else should be left unchecked.
11. Click on PDA tab on ODIN and browse to the custom recovery tar file, select it- it should now appear under PDA tab.
12. Click on start and let ODIN do its thing...
13. Disconnect the phone after successful reboot.
The above steps helped me recover my soft-bricked phone.
I understand you should follow the steps verbatim to use this method...believe me I have tried several iterations- using front USB port, trying without disconnecting all other devices from USB port, without uninstalling Kies, et al...and failed everytime.
I hope this helps you.
:good:

Hard brick help 911

I'm in a big predicament. A few weeks ago I installed the MOAR ROM on my Note 5. After installing this ROM I was no longer able to connect my phone to PC. I tried a Windows 8 PC which says I have an unrecognized USB device plugged in. I tried going into Developer settings to set USB mode to MTP but the option didn't exist. I had all USB drivers installed as well. My wife's phone is recognized no problem. When plugging the phone into my linux machine absolutely nothing happened. It used to show the phone in the left navigation panel in my window manager but after installing MOAR ROM it was no longer detected.
Anyway, today I was trying to play Cartoon Wars 3 and since my phone is rooted it wouldn't let me play. I decided to go into the Super User app and disable it to see if the game would work and it didn't. When I went to re-enable the app it said installation failed and asked me to reboot. I clicked reboot and was sent into a boot loop. I thought okay no big deal, I'll just restore a backup in TWRP. When I go to restore the backup and select the backup file it asks which partitions to restore, but there are no boxes to check. It usually has options like system and data but now it's just blank. I tried a factory reset and I'm still in a bootloop. I'm at a complete loss. I don't know what else to do. I've tried download mode and everything but no matter what I do my phone isn't detected by my pc.
I appreciate any help. I don't know what to do. I'm out of a phone right now and don't have a backup. Not to mention I'm in between jobs right now and can't afford a new one right now.
Just flash a stock rom from sammobile.com
Pre req:
*Odin(any vers)
*Stock rom
Steps
*Extract the downloaded stock rom in your PC
*In twrp wipe everything except internal, then boot in to download mode.
*Once in download mode, connect your phone to your pc, then open Odin.
*In Odin, check the "AP" section and locate the downloaded stock rom(the extracted one)
*Hit start.
Hpe that helps
herculesPh said:
Just flash a stock rom from sammobile.com
Pre req:
*Odin(any vers)
*Stock rom
Steps
*Extract the downloaded stock rom in your PC
*In twrp wipe everything except internal, then boot in to download mode.
*Once in download mode, connect your phone to your pc, then open Odin.
*In Odin, check the "AP" section and locate the downloaded stock rom(the extracted one)
*Hit start.
Hpe that helps
Click to expand...
Click to collapse
Thank you for your reply but it seems you didn't read my post. My phone is not recognized by any pc.
What is the terminal command to restore a backup? That's pretty much my last ditch effort.
Well I broke my recovery so I'm screwed. I contacted Samsung and they said they would service it for free. Wish me luck.
What would cause the phone to stop being recognized by the PC? I narrowed it down to the MTP software or the micro usb charge port. My Windows computer says Device Descriptor Request Failed. Linux box does nothing. No USB devices are listed when I run lsblk.
weinerwad3000 said:
I'm in a big predicament. A few weeks ago I installed the MOAR ROM on my Note 5. After installing this ROM I was no longer able to connect my phone to PC. I tried a Windows 8 PC which says I have an unrecognized USB device plugged in. I tried going into Developer settings to set USB mode to MTP but the option didn't exist. I had all USB drivers installed as well. My wife's phone is recognized no problem. When plugging the phone into my linux machine absolutely nothing happened. It used to show the phone in the left navigation panel in my window manager but after installing MOAR ROM it was no longer detected.
Anyway, today I was trying to play Cartoon Wars 3 and since my phone is rooted it wouldn't let me play. I decided to go into the Super User app and disable it to see if the game would work and it didn't. When I went to re-enable the app it said installation failed and asked me to reboot. I clicked reboot and was sent into a boot loop. I thought okay no big deal, I'll just restore a backup in TWRP. When I go to restore the backup and select the backup file it asks which partitions to restore, but there are no boxes to check. It usually has options like system and data but now it's just blank. I tried a factory reset and I'm still in a bootloop. I'm at a complete loss. I don't know what else to do. I've tried download mode and everything but no matter what I do my phone isn't detected by my pc.
I appreciate any help. I don't know what to do. I'm out of a phone right now and don't have a backup. Not to mention I'm in between jobs right now and can't afford a new one right now.
Click to expand...
Click to collapse
you can try this code and test if it work
*#0808#
Familiaaa said:
you can try this code and test if it work
*#0808#
Click to expand...
Click to collapse
The phone does not boot. Recovery does not boot. The only thing the phone does is go into download mode. The phone does not connect to any computer so I cannot use odin.
weinerwad3000 said:
The phone does not boot. Recovery does not boot. The only thing the phone does is go into download mode. The phone does not connect to any computer so I cannot use odin.
Click to expand...
Click to collapse
when your phone is in download mode,it doesn't work to connect it with samsung kies on your pc?
You could try using the Kies software to reload the stock firmware. Here's an overview of what to do:
- if you don't already have the Kies software installed on your PC, download it (just search Google) and install it. The first time it runs it'll update itself to the latest version so make sure you run it once before proceeding.
- put your phone in Download mode: with the phone completely off, press and hold the Volume Down and Home and Power buttons simultaneously, and release them all when you see the Samsung splash screen
- connect the phone to your PC with the USB cable that came with the phone
-- if you've never had the phone connected to your Windows-based computer before, you'll see messages about installing drivers, etc - just wait until this is done (may take 5 or 10 minutes) [I don't know what happens if you have a Mac - it probably just works]
- in the Kies software, select the second item in the Tools menu and just follow the prompts to enter the model number (in CAPS) and IMEI/Serial Number (both found under the battery - it's ok to remove the battery at this point)
- the Kies software should start downloading the correct firmware for your phone from the Internet; once that's done (depending on your Internet connection speed) it'll begin downloading that to the phone (this probably takes 10 minutes or so)
jubei79 said:
when your phone is in download mode,it doesn't work to connect it with samsung kies on your pc?
You could try using the Kies software to reload the stock firmware. Here's an overview of what to do:
- if you don't already have the Kies software installed on your PC, download it (just search Google) and install it. The first time it runs it'll update itself to the latest version so make sure you run it once before proceeding.
- put your phone in Download mode: with the phone completely off, press and hold the Volume Down and Home and Power buttons simultaneously, and release them all when you see the Samsung splash screen
- connect the phone to your PC with the USB cable that came with the phone
-- if you've never had the phone connected to your Windows-based computer before, you'll see messages about installing drivers, etc - just wait until this is done (may take 5 or 10 minutes) [I don't know what happens if you have a Mac - it probably just works]
- in the Kies software, select the second item in the Tools menu and just follow the prompts to enter the model number (in CAPS) and IMEI/Serial Number (both found under the battery - it's ok to remove the battery at this point)
- the Kies software should start downloading the correct firmware for your phone from the Internet; once that's done (depending on your Internet connection speed) it'll begin downloading that to the phone (this probably takes 10 minutes or so)
Click to expand...
Click to collapse
Kies doesn't work either. I already tried that. When I hook up the phone It says "Device Descriptor Request Failed". It used to connect to my computers until I put MOAR ROM on the phone. Since then it stopped being recognized by my computers. There's either something wrong with the connection or something got corrupted.
weinerwad3000 said:
Kies doesn't work either. I already tried that. When I hook up the phone It says "Device Descriptor Request Failed". It used to connect to my computers until I put MOAR ROM on the phone. Since then it stopped being recognized by my computers. There's either something wrong with the connection or something got corrupted.
Click to expand...
Click to collapse
What have you already tried?
- are you sure you're using a data cable and not a charging-only cable?
- have you tried a different computer?
- have you installed the Kies software?
- what does Device Manager show when the phone is connected?
- assuming that the phone is working normally, does the phone show anything when you connect it?
- do you have try windows 8 or 10?
can be you found a solution in this forum
http://forums.androidcentral.com/sa...-not-being-recognised-download-mode-odin.html
jubei79 said:
What have you already tried?
- are you sure you're using a data cable and not a charging-only cable?
- have you tried a different computer?
- have you installed the Kies software?
- what does Device Manager show when the phone is connected?
- assuming that the phone is working normally, does the phone show anything when you connect it?
- do you have try windows 8 or 10?
can be you found a solution in this forum
http://forums.androidcentral.com/sa...-not-being-recognised-download-mode-odin.html
Click to expand...
Click to collapse
I've tried 4 different cables. My wife's S5 works perfectly fine on all computers. I have tried in Windows 7, 8, 8.1, and 10. I've also tried in Linux Mint. It used to work until I installed MOAR Rom. Windows says Device Descriptor Request Failed. Linux doesn't do anything when hooked up. lsblk doesn't show the device either.
I have a bit of an update. Apparently something happened with all my data cables. I hooked up my wife's phone the other day and I was all of a sudden receiving the same error as the note 5. I went out and bought a new data cable and now her phone connects again. I'm waiting for the Note 5 to charge up so I can try Odin. I'll post back my results.
I apologize to those who told me it was the cable. I just didn't see that it was conceivable that all 4 of my data cables were all of a sudden damaged. Never underestimate the ability of children to destroy every working cable you own.
Well I'm still getting the error. I have some usb cables coming in the mail so once i try those out I'll get back to everyone.
weinerwad3000 said:
Well I'm still getting the error. I have some usb cables coming in the mail so once i try those out I'll get back to everyone.
Click to expand...
Click to collapse
Were you able to fix your issue. I have the same issue. Note 5 N9208, I can get into Recovery (TWRP) and Download mode, but can not boot. The USB connection is showing USB Device Descriptor failed. I have tried 5 different cables and Windows 7/10 Ubuntu and cant get the phone to show up on the PC. I also have changed the USB port of the phone. Any insight would be helpful.
musab_bari said:
Were you able to fix your issue. I have the same issue. Note 5 N9208, I can get into Recovery (TWRP) and Download mode, but can not boot. The USB connection is showing USB Device Descriptor failed. I have tried 5 different cables and Windows 7/10 Ubuntu and cant get the phone to show up on the PC. I also have changed the USB port of the phone. Any insight would be helpful.
Click to expand...
Click to collapse
I ended up trying to replace the port and accidentally cut the ribbon for the LCD screen. Ended up getting a new phone.

[Q] XPERIA SP CAN'T DETECT ANY USB (PC or WALL CHARGER)

Good evening everyone!
I need help so bad, so urgent!
It was happen when i try to install TWRP on my SONY Xperia SP using an amazing stupid way, using flash boot command coz i cant install twrp using flash recovery command, but i dont know why that fastboot take so long time and just display <waiting for device>. So i decided to remove my USB and plug it once again. Suddenly, my laptop show a notif. "USB not recognized" and the blue LED is gone, then SONY logo appear and start to charging and u can hear connect-"Not recognized"-and disconnect sounds from laptop. But, when the display turn off, it's turn on again, and 5 seconds later u can hear disconnected sounds, then charging stopped. Few later, the logo come again and charging again, and the same thing happend. When i try to charge from the wall charger, it can charging normally, but I CAN'T TURN THE PHONE ON. It's like the power button has been disabled. So i unplug the charger and turn my XSP on, it can boot normally. But when i try to connect to charger, it wont charging. So on my laptop, even my laptop didnt notice any USB, and my XSP didn't show any LED.
Help me to fix this. I can't charge my phone except to turn it off T_T. Pls give me a way out T_T.
Status: Installed AOSP Oreo 8.0.0 huashan, not rooted and no cwm/twrp (this is what i need to install, so i can root my phone, the latest cwm i installed gone after flashing AOSP ROM), cant connect to any USB even in fastboot mode (i've installed the driver).
seems like you got dust in your usb port , it happened to me once , i freaked out real bad. just try clearing it with some needle or stuff , also you might wanna use emma to revert your phone back to its original stock firmware.
AsadXperia said:
seems like you got dust in your usb port , it happened to me once , i freaked out real bad. just try clearing it with some needle or stuff , also you might wanna use emma to revert your phone back to its original stock firmware.
Click to expand...
Click to collapse
what's emma? how to use that?
it's a sony developer tool. You can use it to install original os on your phone , you just need a pc and internet connection , here
https://talk.sonymobile.com/t5/Andr...ony-Flash-tool-for-Xperia-devices/td-p/307318
Also , just save the customization file and delete the rest , download emma sony flash tool from google ( latest version ) copy the customization file after installing it.
After it completes install , run it and wait for it to open , it may take some time during its first run.
Now plug in ur phone , while holding volume down button , you should see green light on bottom , that indicates you're on recovery mode or flashmode. The Emma tool will detect device and start installing original firmware on it.
AsadXperia said:
it's a sony developer tool. You can use it to install original os on your phone , you just need a pc and internet connection , here
Also , just save the customization file and delete the rest , download emma sony flash tool from google ( latest version ) copy the customization file after installing it.
After it completes install , run it and wait for it to open , it may take some time during its first run.
Now plug in ur phone , while holding volume down button , you should see green light on bottom , that indicates you're on recovery mode or flashmode. The Emma tool will detect device and start installing original firmware on it.
Click to expand...
Click to collapse
that was my problem. when i plug my phone in fastboot or bootloader, pc wont detect it, it says "USB not recognized". also when my phone is standby, it wont detect any usb i plugged in, wall charger or usb pc.
i've installed latest driver for XSP, and USB debugging's on.
have you read my first comment? , clear your phone's usb slot and then try replugging , if it fails try it on a different computer , the problems usually with windows 10 as it loses recognizing devices after some fail attempts.

Categories

Resources