Related
Guys i need help!!!
I'm a fresh new android user especially SGS+...after rooting the phone, i downloaded an app ERIS MARKET!! I tried using it everything went so good then it asked me to restart the phone...and that's it!!! it shows the samsung logo then galaxy s plus then turns off again and again samsung logon..samsung s plus and so on...!!!
I tried the factory reset but nothing happened!!
Now i've lost all the data and had my phone bricked ((
Any help??
Use odin to reflash. Search for your model than download everything and follow guide or if you have backup on your phone.
ShahirHabib said:
Guys i need help!!!
I'm a fresh new android user especially SGS+...after rooting the phone, i downloaded an app ERIS MARKET!! I tried using it everything went so good then it asked me to restart the phone...and that's it!!! it shows the samsung logo then galaxy s plus then turns off again and again samsung logon..samsung s plus and so on...!!!
I tried the factory reset but nothing happened!!
Now i've lost all the data and had my phone bricked ((
Any help??
Click to expand...
Click to collapse
Hold on, you are not totally bricked as such, if your phone can still boot up like that there is still much life in it. in this case Odin is your buddy. Download your stock firmware according to your region (im not sure if im allowed to post links to other sites, so i wont),
Download Odin (find out how to use it, with the PIT file and your Stock ROM)
Launch Odin (from your PC ofcoz)
Switch off your phone by removing the battery
Put the battery back in, hold HOME button + Volume Down + then POWER button, Your phone should go into download mode.
Connect you phone to the PC using your USB cable, (odin should highlight a yellow square to signal you that your phone has been detected)
Put all the file you downloaded into thier rightful place and then flash.
I have just jumbled it up to give you a general direction, there should be more detailed infor on this site, keep looking and good luck
Tar file
thanks alot guys..
I've downloaded the ODIN and now i've the PIT file but where can i get the TAR file for my i9001?
take a look at samfirmware.com , there you can get the stock roms you want
stock firmware
how can i know the stock firmware on my phone? it doesnot start up so i can't get into the settings or something? and i'm sry but i don't get what does the region do with the firmware?
I'm so sorry but i'm really a very new android user
Thank you so much
search this forum and you find tens of tar files
1. Watch this Video w w w.youtube.com/watch?v=JmvCpR45LKA
2. Just register here w w w.sammobile.com/firmware/ when done click firmware and download what you need!
alzaq said:
search this forum and you find tens of tar files
Click to expand...
Click to collapse
As it was already mentioned go to samfirware.com and look for a stock rom espeacially for your region.
If you dont know wich to use, try to google the different country codes.
Further you should download odin 4.43 (u must use 4.43) and flash it back to the stock.
Like if it helped u unbrick ur phone
---------- Post added at 09:39 AM ---------- Previous post was at 09:34 AM ----------
ShahirHabib said:
how can i know the stock firmware on my phone? it doesnot start up so i can't get into the settings or something? and i'm sry but i don't get what does the region do with the firmware?
I'm so sorry but i'm really a very new android user
Thank you so much
Click to expand...
Click to collapse
You only have to know that ur owning a I9001
Go to samefirware.com and check the regional code
Download Odin 4.43 ( u must!!!!! use 4.43 otherwise it´ll freeze while processing)
plug in ur usb cable and wait while odin checks ur phone
flash ur phone back to stock
(if u dont know how to use odin read a tut. or write a mail to me im an expert =))
Best place to look is xda wiki:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
You need odin and ariesve.ops
And some stock ROM.
Hi, so I installed CM7 on my galaxy mini but now I want go back to stock rom but the problem is when I conect my phone to pc odin detect it I click start(I want GB 2.3.4) and on my phone screen comes up message samsung own update fail . And nothing happens. Plz help my.
Samsung galaxy mini CM 7.1/2.3.7
P.S Sorry for bad english
Did you go into the downloading mode? (Vol down + middle button + power)
Sent from my GT-S5570 using XDA
Download
Yes Im in download mod and I get this message samsung_bml_format FAIL: 90220000
ONW UPDATE FAIL!!!
tauriuxx said:
Hi, so I installed CM7 on my galaxy mini but now I want go back to stock rom but the problem is when I conect my phone to pc odin detect it I click start(I want GB 2.3.4) and on my phone screen comes up message samsung own update fail . And nothing happens. Plz help my.
Samsung galaxy mini CM 7.1/2.3.7
P.S Sorry for bad english
Click to expand...
Click to collapse
ARM11boot_GT-S5570.tar Flashed this like BOOT (nothing more selected) and after that reboot phone to download mode and flashed by following the guide. Now everything works fine. This model only need TASS_V1 ops file, no PIT files for this. Successfuly flashed with XXJL9 fw. Thanks RIFF for bootrepair this phone! BR
You can find "ARM11boot_GT-S5570.tar" here: http://www.4shared.com/dir/LqqytWde/sharing.html
mr.faridcom said:
ARM11boot_GT-S5570.tar Flashed this like BOOT (nothing more selected) and after that reboot phone to download mode and flashed by following the guide. Now everything works fine. This model only need TASS_V1 ops file, no PIT files for this. Successfuly flashed with XXJL9 fw. Thanks RIFF for bootrepair this phone! BR
You can find "ARM11boot_GT-S5570.tar" here: http://www.4shared.com/dir/LqqytWde/sharing.html
Click to expand...
Click to collapse
be careful on flashing the bootloader buddy.. it can hard brick your phone.. DO IT AT YOUR OWN RISK..
Brick
Hehe. Now I bricked my phone. When I turn it on it just shows blank screen. But I talked with my Dad and we decided to make a jig usb. Well tomorow Im going to buy a 300k resistor and micro usb. I will try to make a jig usb with my dad so then I can put my phone into download mode and flash it. I hope this gonna work http://www.youtube.com/watch?v=eOxtYSdEy-o
You got a nice dad man. If I tell my dad about USB jigs he would shout at me saying "WHO THE **** ASKED YOU TO ****ING SCREW UP YOUR PHONE? NOW SUFFER!"
chemicalrage said:
You got a nice dad man. If I tell my dad about USB jigs he would shout at me saying "WHO THE **** ASKED YOU TO ****ING SCREW UP YOUR PHONE? NOW SUFFER!"
Click to expand...
Click to collapse
yeah... lmfao
Thanks for all replies. I already sold my galaxy mini so no more problems with it
Sent from my LT22i using Tapatalk 2
tauriuxx said:
Thanks for all replies. I already sold my galaxy mini so no more problems with it
Sent from my LT22i using Tapatalk 2
Click to expand...
Click to collapse
Buddy i dont know if i am right or not but always remember after u flash a custom rom and u want to return to gingerbread ,,
flash all 4 files i.e boot , phone,pda ,csc files.. never use md5 tar files a single flash files ..if u do that 100% u gonna brick ur phone,,
always remember 4 flash files...
Samsung Galaxy Mini S5570 will not turn on
Samsung Galaxy Mini S5570 device does not respond at all I crashed this ekllenti'i arraza was .Cyanus kernel v1.9 changelog, I would like to be the yarddımc from friends who knew I had to install.
Phone Opening Download Mode but not late
Hi Guys,
apologies in advance but I have Galaxy S and since this morning it s just in boot up mode was flashed and rooted with ( Ultimate Rom ) so all i get when i press power button is ultimate home page and then second ultimate loading up page and thats it does not open up properly and it vibrates too ??
I have tried the volume up button power button and home button but nothing just comes up galaxy s black page then ultimate then back to Back Galaxy page < Please help as im so crap at this and got help from someone on here a while plase advise and help in english lol ???
Thanks
charlie2
Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA
Talon26 said:
Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??
can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551
charlie2 said:
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
Click to expand...
Click to collapse
Yes you can use a jig that would be easiest and best for the future in-case you run into this again...
However i don't understand why download or recovery is not working if you are already on custom, you have achieved it before right? If not use a video to help.
However if the standard methods do not work then there are sill some tricks..
1. Take out the battery>>>Hold the button combo>>>Insert battery whilst holding combo>>>When the boot screen appears (Samsung GT-I9000) hold for about half a second/whole second then release>>>Wait. If it continues to boot loop again then take out battery
2. From task manager close all Kies apps/processes>>>Put your usb cable in>>>plug in your phone>>>hold the combo>>>Wait.
3.Take out battery>>>Do all of 2>>>When the USB is connected to phone whilst holding the combo insert battery>>>Wait.
4. Repeat 3 with charger instead of the USB cable
If none of that works then yes i think you will need to make or buy the jig. (Or borrow if you can). But also do a search as im not sure if i covered all the tricks. There used to be a thread on it in the general section, try search for it.
charlie2 said:
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??
Click to expand...
Click to collapse
Sammoblie.com, [Ramad] Stock Firmware or Darky 10.2RE
Sammobile.com is straight forward. Click on smartphone, then android etc. Just follow the clicks then you select the FW that is relevant to you based on country and provider... If use the Ramad link then you will need your csc code which will be retrievable from the sammobile site its at the bottom.
Good luck
guy7685 said:
can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
It says JIG Detected but nothing else ?
Is my phone dead for good ?
Also the link you gave is dead no go ?
Please help im stuck need step by step advice still a real novice ???
charlie2 said:
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
Click to expand...
Click to collapse
Excelent this is exactly what you need to happen
charlie2 said:
Please help im stuck need step by step advice still a real novice ???
Click to expand...
Click to collapse
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset
Lexrsk said:
Excelent this is exactly what you need to happen
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset
Click to expand...
Click to collapse
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2
charlie2 said:
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2
Click to expand...
Click to collapse
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version
Lexrsk said:
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version
Click to expand...
Click to collapse
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2
charlie2 said:
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2
Click to expand...
Click to collapse
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.
Lexrsk said:
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.
Click to expand...
Click to collapse
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2
charlie2 said:
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2
Click to expand...
Click to collapse
when you are saying that it is doing nothing is odin flash failing ??
Flash completing and then phone not booting??
If the stock ROM is not working try Darky's 10.2 as it will generally work when other methods fail.
Mate , I can not thank you enough i tried again after i last put message on here and all done i now have 2.3.6 and as far as i am concerned all ok now. I did have to get into recovery mode after i used Odin for mob to start up and just did a system rebbot or should i say factory rebbot. All ok now and alot of songs i had were all still on memory card ok had to re install apps i had before but hey ho.
any advice on battery usage ?
a big big thankyou
Thanks
charlie2
charlie2 said:
any advice on battery usage ?
a big big thankyou
Thanks
charlie2
Click to expand...
Click to collapse
I personally use juice defender. works for me.
If i help just hit the thanks button...
Lexrsk said:
I personally use juice defender. works for me.
If i help just hit the thanks button...
Click to expand...
Click to collapse
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2
charlie2 said:
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2
Click to expand...
Click to collapse
No problem mate.
Just trying to help where i can
hi guys ive got an old samsung galaxy ace s5830 i want to use it for my daughter but it wont boot past the samsung screen now ive got the usb drivers and odin and the firmware but it seems i have to break down the firmware file or something i just cant get it to work can someone please help im desperate here!!
thanks in advance
rob
robj1974 said:
hi guys ive got an old samsung galaxy ace s5830 i want to use it for my daughter but it wont boot past the samsung screen now ive got the usb drivers and odin and the firmware but it seems i have to break down the firmware file or something i just cant get it to work can someone please help im desperate here!!
thanks in advance
rob
Click to expand...
Click to collapse
can elaborate more
are you in download mode?
did your phone is detected by odin?
where do you find the stock rom?
try one more thing
go to cmw by power button+home key
reset factory setting
robj1974 said:
hi guys ive got an old samsung galaxy ace s5830 i want to use it for my daughter but it wont boot past the samsung screen now ive got the usb drivers and odin and the firmware but it seems i have to break down the firmware file or something i just cant get it to work can someone please help im desperate here!!
thanks in advance
rob
Click to expand...
Click to collapse
Boot into STOCK recovery mode and perfom; wipe data/factory reset and wipe cache partition to avoid the bootloop, then reboot yoir device
robj1974 said:
hi guys ive got an old samsung galaxy ace s5830 i want to use it for my daughter but it wont boot past the samsung screen now ive got the usb drivers and odin and the firmware but it seems i have to break down the firmware file or something i just cant get it to work can someone please help im desperate here!!
thanks in advance
rob
Click to expand...
Click to collapse
Welcome to XDA robj1974. You have two ways to solve this:
1)- Boot into recovery and wipe data reset. (Volume+ + MenuKey + PowerKey)
2)-Boot into Download mode and flash a fresh firmware on your cell.(Volume- + MenuKey + PowerKey)
All the best!
robj1974 said:
hi guys ive got an old samsung galaxy ace s5830 i want to use it for my daughter but it wont boot past the samsung screen now ive got the usb drivers and odin and the firmware but it seems i have to break down the firmware file or something i just cant get it to work can someone please help im desperate here!!
thanks in advance
rob
Click to expand...
Click to collapse
Hi There,
Well you will need to flash your device using Odin. Download the firmware package from www.sammobile.com/firmwares and flash it using Odin.
Hello everyone,
The situation is more or less this one: my phone stopped to work since the Lollipop has installed on it automatically, I allowed that update of course. Since then became very unstable, till start looping constantly...
FYI: Bought the phone in US but I'm living in Portugal, so Samsung over here didn't gave me any support due to warranty restrictions.
So I tried to solve the issue by myself and completely messed up with the phone.
I downloaded the Firmware version: I9295XXUDOD3_I9295OXXDOD1_I9295XXUDOD3_HOME.tar.md5
Model GT-I9295
Model name GALAXY S4 Active
Country Portugal (TPH)
Version Android 5.0.1
Changelist 4556221
Build date Thu, 16 Apr 2015 07:43:33 +0000
Product code TPH
PDA I9295XXUDOD3
CSC I9295OXXDOD1
Followed all the instructions:
Extract (unzip) the firmware file
Download Odin v3.10.6
Extract Odin ZIP file
Open Odin v.3.10.6
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes.
The Odin is showing green "Pass", after 07' and 18'' of installation process.
But the phone simply reboots at the end and shows on the screen (on blue) RECOVERY BOOTING and nothing else happens.
Just freezes there...
I've tried to press and hold Home + Power + Volume Up buttons, and stays always on the same.
Tried several attempts to "flash the Rom", and something went very wrong, failed on Odin, etc... I know that I'm completely out of my league!
So, what can I do now to recover it? Is there a way or the phone is permanently lost?
Thank you so much for your help guys!
Rui
First question, you mentioned that you bought the phone in the US. Did you purchase the AT&T model i537, or international model i9295? Since you can't boot your phone you can check which model underneath the battery, or if you have the AT&T version there will be an AT&T logo on the back cover.
I think is the "international model".
Devo7v said:
First question, you mentioned that you bought the phone in the US. Did you purchase the AT&T model i537, or international model i9295? Since you can't boot your phone you can check which model underneath the battery, or if you have the AT&T version there will be an AT&T logo on the back cover.
Click to expand...
Click to collapse
At least it is not the AT&T version, cause there isn't any logo on it. Here is its ID data:
"MODELO": GT-I9295
FCC ID: A3LGTI9295
SSN: -I9295GSMH
S/N: R31D70S6ZBF
Ty.
download mode still working? if yes try to flash 442
you flashed 501 over 422?
If I fully understand what you are meaning, I think I can say I've flashed 501 over 501 already.
The phone was already with Lollipop. It upgraded it via OTA as I'm saying initially. As the phone stooped to work, I've downloaded the Android 501 - Firmware version: I9295XXUDOD3_I9295OXXDOD1_I9295XXUDOD3_HOME.tar.md 5 and the situation now is as the one previously described.
you did't answer, Vol.down+power for download mode is working? try to flash custom recovery .
Yes, it's still working.
How to flash a custom recovery?
Devo7v said:
First question, you mentioned that you bought the phone in the US. Did you purchase the AT&T model i537, or international model i9295? Since you can't boot your phone you can check which model underneath the battery, or if you have the AT&T version there will be an AT&T logo on the back cover.
Click to expand...
Click to collapse
So, what should be the next step?
Yes, download mode still working.
tofanpc said:
you did't answer, Vol.down+power for download mode is working? try to flash custom recovery .
Click to expand...
Click to collapse
How to flash a custom recovery?
Ty.
http://forum.xda-developers.com/showthread.php?t=2888674
tofanpc said:
http://forum.xda-developers.com/showthread.php?t=2888674
Click to expand...
Click to collapse
I've downloaded the tar file from download link. Used Odin and "Pass!" the flash process.
Then the phone Recovery Mode is showing one more line after the "Recovery Booting....": the line in red says "RECOVERY IS NOT SEANDROID ENFORCING".
Don't know what to do next. I'm stuck here
Please I'm completely lost
tofanpc said:
http://forum.xda-developers.com/showthread.php?t=2888674
Click to expand...
Click to collapse
Probably at this point I'll need also the right Pit file?? As well as the 4 Tar correct files - BL/AP/CP/CSC to a full recovery...
Tried to flash with the 4.4.2 and still freezes on "Recovery Booting...."
Thank you for your help.
Every time you flash a stock rom through Odin, your phone will return to stock recovery too.
Yes I think you'll need pit files.
Where to find the correct ones for this phone?
tofanpc said:
Every time you flash a stock rom through Odin, your phone will return to stock recovery too.
Yes I think you'll need pit files.
Click to expand...
Click to collapse
OK.
So in this case, can you tell me where can I find these 5 files in stake to perform the full and correct operation?
Tyvm
In PM
Sorry, not following you...
tofanpc said:
In PM
Click to expand...
Click to collapse
OK, seen your message...
no file available
tofanpc said:
In PM
Click to expand...
Click to collapse
Went to the website you told me: http://androidbiits.com/update-samsung-galaxy-s4-active-gt-i9295-to-android-4-4-2-kitkat-xxucne5/
The link is not working there: sammobile.com/firmwares/3/?download=30085
http://www.sammobile.com/firmwares/download/30085/I9295XXUCNE5_I9295PHNCNE1_PHN.zip
The web page shows "404 Not Found".
But, should be in a Zip like this one with the necessary files to a complete process:
At least on the page instructions of androidbiits.com it's mentioned about several files to choose with Odin:
a ".tar.md5" file plus a "modem" file plus a "csc" file + a ".pit" file.
Any suggestion to find an alternative?
Again, stuck...
any help pls?
Devo7v said:
First question, you mentioned that you bought the phone in the US. Did you purchase the AT&T model i537, or international model i9295? Since you can't boot your phone you can check which model underneath the battery, or if you have the AT&T version there will be an AT&T logo on the back cover.
Click to expand...
Click to collapse
Can you help pls?
Rui Rolo said:
Can you help pls?
Click to expand...
Click to collapse
Firstly, I would recommend to use Odin 3.7 or 3.9. You can get the firmware from sammobile.com/firmware, put the device name and select the one for your region.
I would recommend a clean install with factory reset.
He can't make factory reset. Phone is stuck in recovery starting.