Lg g2 VS980 39a bootstack. rooted AutoRec, Twrp Recovery, root checker,busybox. tried some custom roms, switched back to stock several times. NoProblems, untill now. My screen will not stay on. It lights up and will remain on untill the first time it goes dark. then it comes on for one second, then off. Must reboot. then same thing.
fixed
simple fix. replaced screen protector and cleaned. sorry thought it was software,just stupid.
Related
Tried to change the cover of the phone, but I did not go trough with it.
So I screwed it back together, and now Android wont boot, the screen just goes black after a few seconds. The screen works, the buttons work, it's only the OS that wont boot.
Anyone seen this before?
Solved, got the phone mounted in CWM, and Rooted a new rom
Been using SS3 since it was first introduced and have been loving it. Was using newest CM10 from Hashcode and when I woke up this morning the screen was on but black, had to do a battery pull. Phone will boot through safestrap logo, but right before CM10 logo the screen flashes and goes black. I have let it sit for 10minutes with nothing coming up, just glowing black screen. I have booted into AOSP and steeldroid and they work fine.
Any ideas??
updated to new build and it boots. Must have been a bad file somewhere.
So I was at work and my phone had 5% battery left approximately so i shut it down to be able to use it right after my shift ends. So when my shift ended, i tried to boot my phone back up and it makes it to the ATT splash screen but will not go any farther. I rebooted into recovery mode and my phone showed battery at 1%. I placed my phone on the stock usb 3.0 charger and it showed that it was charging. i tried booting again after a while but it wont get past that splash screen. During the time that its stuck on the splash screen, the blue LED pulses.
Its been charging for an hour and the battery logo is showing at least 50% now but it still wont boot past that screen
Im on 4.4.2 and its rooted (i have the safestrap recovery). this has happened before but i didnt have the patience and reflashed the stock kitkat firmware through odin and re-rooted. I lost all my data and would like to avoid doing that again. any help would be greatly appreciated.
ant6893 said:
So I was at work and my phone had 5% battery left approximately so i shut it down to be able to use it right after my shift ends. So when my shift ended, i tried to boot my phone back up and it makes it to the ATT splash screen but will not go any farther. I rebooted into recovery mode and my phone showed battery at 1%. I placed my phone on the stock usb 3.0 charger and it showed that it was charging. i tried booting again after a while but it wont get past that splash screen. During the time that its stuck on the splash screen, the blue LED pulses.
Its been charging for an hour and the battery logo is showing at least 50% now but it still wont boot past that screen
Im on 4.4.2 and its rooted (i have the safestrap recovery). this has happened before but i didnt have the patience and reflashed the stock kitkat firmware through odin and re-rooted. I lost all my data and would like to avoid doing that again. any help would be greatly appreciated.
Click to expand...
Click to collapse
have you tried booting with it connected to the charger?
ant6893 said:
So I was at work and my phone had 5% battery left approximately so i shut it down to be able to use it right after my shift ends. So when my shift ended, i tried to boot my phone back up and it makes it to the ATT splash screen but will not go any farther. I rebooted into recovery mode and my phone showed battery at 1%. I placed my phone on the stock usb 3.0 charger and it showed that it was charging. i tried booting again after a while but it wont get past that splash screen. During the time that its stuck on the splash screen, the blue LED pulses.
Its been charging for an hour and the battery logo is showing at least 50% now but it still wont boot past that screen
Im on 4.4.2 and its rooted (i have the safestrap recovery). this has happened before but i didnt have the patience and reflashed the stock kitkat firmware through odin and re-rooted. I lost all my data and would like to avoid doing that again. any help would be greatly appreciated.
Click to expand...
Click to collapse
Can you get into Safestrap atleast or not?
DK 4.1, GPE Orange, Xposed, xgel, and other great extras
xXPINCARXx said:
Can you get into Safestrap atleast or not?
DK 4.1, GPE Orange, Xposed, xgel, and other great extras
Click to expand...
Click to collapse
I tried everything with no luck. Ended up just reflashing my firmware again. I'd like to know what that issue was however, in case it happens again.
Alright, did you install any xposed modules or anything of that sort?
DK 4.1, GPE Orange, Xposed, xgel, and other great extras
xXPINCARXx said:
Alright, did you install any xposed modules or anything of that sort?
DK 4.1, GPE Orange, Xposed, xgel, and other great extras
Click to expand...
Click to collapse
i did not, it was 100% stock 4.4.2 firmware, rooted with towel root and safestrap 3.75
System tuner is an app i use, and i changed some build.prop info such as dalvik vm heap growth limit, start size, and wifi scan interval. but thats about it
Sorry for the late reply but these changes could simply be your problem. Though I am unsure of this it's really the only thing that would make sense besides a hardware issue
DK 4.1, GPE Orange, Xposed, xgel, and other great extras
I have an LG VS980 which I attempted to put Cyanogenmod on via TWRP. Unfortunately, after going through the process and TWRP indicating that it was successful, my phone now just turns on, displays the LG Logo, vibrates, turns off, and repeats. I'm able to get back into TWRP via the factory reset screen, however. I was able to use fastboot to put on a few different LG VS980-compatible ROMS, but none of them work, indicating that it's not the ROM that's bad. Somehow, I don't have a backup of the original system. I thought I made one, but now it's not there. This is my main phone and I can't do anything with it as of now. Please help. Thanks.
Tominator368 said:
I have an LG VS980 which I attempted to put Cyanogenmod on via TWRP. Unfortunately, after going through the process and TWRP indicating that it was successful, my phone now just turns on, displays the LG Logo, vibrates, turns off, and repeats. I'm able to get back into TWRP via the factory reset screen, however. I was able to use fastboot to put on a few different LG VS980-compatible ROMS, but none of them work, indicating that it's not the ROM that's bad. Somehow, I don't have a backup of the original system. I thought I made one, but now it's not there. This is my main phone and I can't do anything with it as of now. Please help. Thanks.
Click to expand...
Click to collapse
If you can get into download mode, return it to stock using the guide in the General section.
So I've had my phone rooted for a while on 26A using Xdabbeb's VS980 2.20. Worked well, but I started having some issues. In trying to fix those issues, I backed everything up and used this guide to revert back to stock 11A (TOT method).
Reverting back to stock worked well. Verizon started pushing OTA's (which I haven't had for a very long time). I believe I got up to 29A. However, Verizon pushed one more OTA, phone rebooted, installed step 1/2, and then step 2/2.
This is where I'm stuck. After finishing step 2/2, the phone rebooted, showed the LG logo and stopped.
I can get in to stock recovery mode. The green android flashes on screen briefly, restarts, but it get's stuck on the LG logo when it restarts.
Download modes doesn't install drivers on PC to show as a COM port. LG Flash Tool can't find it when I try to flash anything on it.
Any ideas on what to try next? I'm completely lost on where to go from here. Any help would be extremely appreciated.
TL;DR: Stock LG G2 phone is stuck on LG logo after OTA update to 39A. Recovery isn't working. Download mode isn't working.
Nsnd said:
So I've had my phone rooted for a while on 26A using Xdabbeb's VS980 2.20. Worked well, but I started having some issues. In trying to fix those issues, I backed everything up and used this guide to revert back to stock 11A (TOT method).
Reverting back to stock worked well. Verizon started pushing OTA's (which I haven't had for a very long time). I believe I got up to 29A. However, Verizon pushed one more OTA, phone rebooted, installed step 1/2, and then step 2/2.
This is where I'm stuck. After finishing step 2/2, the phone rebooted, showed the LG logo and stopped.
I can get in to stock recovery mode. The green android flashes on screen briefly, restarts, but it get's stuck on the LG logo when it restarts.
Download modes doesn't install drivers on PC to show as a COM port. LG Flash Tool can't find it when I try to flash anything on it.
Any ideas on what to try next? I'm completely lost on where to go from here. Any help would be extremely appreciated.
TL;DR: Stock LG G2 phone is stuck on LG logo after OTA update to 39A. Recovery isn't working. Download mode isn't working.
Click to expand...
Click to collapse
I'm exactly on the same boat. Were you able to fix this problem?
rayl8w said:
I'm exactly on the same boat. Were you able to fix this problem?
Click to expand...
Click to collapse
Unfortunately, no. My phone is currently on it's way to LG to see what they can do with it. I won't know any more until late next week .
Got the word back from the repair department. The LCD screen was bad or connector (pretty much knew that). Not sure if they got it to turn on, but they were going to charge $150 to repair/refurbish it (90 day warranty). I called to get more information but the person I talked to didn't seem to know any answers to my questions, so I gave up.
I opted to buy a new LG G2 from eBay for $195 (1 year warranty).
When I get the old phone back, I'll see if it boots.