guys please help me I have big problem - Galaxy Note5 Q&A, Help & Troubleshooting

Hi guys I have note 5 N9200 Chinese I tried to root and install google play store but it did not work . I have tried everything in the forum bout annd still did not work. I flashed the full 4 fremware & pit to start from scratch but I did not work also. When I try to flash the N9200 root form here http://forum.xda-developers.com/note5/general/guide-sm-n9200-hk-version-note-5-root-t3214234 by using Odin I got field and I got another error on the note screen " A/L is enabled, not allow download not-A/L BOOT BINARY "
Now the phone is work normally but without google play store.
Any I idea how fix this problem

backup your efs imei and. install stock rom re-root. try again..
sent from n920c via tapatalk

return99 said:
backup your efs imei and. install stock rom re-root. try again..
sent from n920c via tapatalk[/QUOTE
the problem is that I cannot do anything because the phone is stuck on the lowland mod
Click to expand...
Click to collapse

keep home+volume down+ power just wait for dark screen if you see Samsung logo unkeep buttons. try few times..
sent from n920c via tapatalk

Please refrain from using this kind of title.
It is a Help and troubleshooting forum FGS, your title is meaningless here.

return99 said:
keep home+volume down+ power just wait for dark screen if you see Samsung logo unkeep buttons. try few times..
sent from n920c via tapatalk
Click to expand...
Click to collapse
I did that already and it load to the emergency software recovery. the main problem is that when I try to flash the stock ROM , it fields on Odin and I get an error massage on phone that says ' " A/L is enabled, not allow download not-A/L BOOT BINARY " and I don't know what to do

i had 1 time frp lock problem. my fix way like my said.. and download mode opened. (same note5 n920c.) good luck.

Related

[Q] Samsung Galaxy Tab blank screen after flash attempt

Hi,
Please help. I tried flashing the Galaxy Tab with some firmware on samfirmware.com for North America and not sure what happened but now the Tab is completely blank and not responsive. When I connect the USB to the computer, it does recognize that the Tab is connected though. Please let me know what I should do to fix this. Thanks!!
dai123 said:
Hi,
Please help. I tried flashing the Galaxy Tab with some firmware on samfirmware.com for North America and not sure what happened but now the Tab is completely blank and not responsive. When I connect the USB to the computer, it does recognize that the Tab is connected though. Please let me know what I should do to fix this. Thanks!!
Click to expand...
Click to collapse
Is it possible you flashed the wrong FW? After flashing was the tab able to reboot?
Try wiping cache and do a factory reset. Volume-up+powerbutton. You will see in the middle of the screen a little triangle. Then push the volume-up button again. Then you will be in the recovery-mode. There choose wipe/cache and the wipe-data/factoryreset.
If that not helps try flashing another FW. The Rot-hammer i.e.
Fixed it!
Actually, somehow I fixed it now. There was nothing on the display at all. I could see from Odin that it could sometimes try uploading the firmwares. What I think worked was I pressed the Home + Volume Down + Power to try to bring the Tab into download mode and then I pressed Start on Odin immediately to try uploading a different firmware. There was no display on the Tab itself so I was not sure if it was actually in download mode.
Anyway, I'm glad it's working fine now.
Question
dai123 said:
Actually, somehow I fixed it now. There was nothing on the display at all. I could see from Odin that it could sometimes try uploading the firmwares. What I think worked was I pressed the Home + Volume Down + Power to try to bring the Tab into download mode and then I pressed Start on Odin immediately to try uploading a different firmware. There was no display on the Tab itself so I was not sure if it was actually in download mode.
Anyway, I'm glad it's working fine now.
Click to expand...
Click to collapse
Can you please tell me what firmware you used?
The same thing happened to me, but the problem continues after trying several different firmwares.
unanony said:
Can you please tell me what firmware you used?
The same thing happened to me, but the problem continues after trying several different firmwares.
Click to expand...
Click to collapse
please tell me what firmware you flashed...please im stuck and depending on what firmware i flash i can hear it start but still blank screen
Same black screen
I can get Odin to recognize my tab, windows 7 can see it and I can flash to it, but the screen is black all the time.
Has anyone had any luck?
What do samsung use to fix this? I've seen a repair/service program from ZTE for some of their devices that I believe was procured from an employee of ZTE. Maybe there is something like that around?
<edit>
I also flashed a rom from samfirmware, so I guess the issue is a locked bootloader from a stock rom. Anyone know how to fix this?
I too am having this issue with sawfiremware image.
i can can tell i am in download mode but i am unable to flash the EA24 firmware.
Anything that can be done?
Thank you!!
My Tab's screen won't turn on at all, even when plug-in, even that Odin said that flash was successful. But after connecting it to PC with Odin opened (Odin recognized it), loaded all files needed for flash in Odin, I pressed HOME+Volume Down + Power, the device auto-dismounted from PC, and reconnected again, I pressed start in Odin and after finishing updating firmware, the screen was working again.
Good luck to everybody! I'm happy now
what firmware did you use? thx
HELP
hello guys i have the same problem can you please help me out on how to fix it?? my screen is black and i only have the 4 white buttons up, please i need some serious assistence
Blank Screen after installing firmware same firmware
hey guys, could you lend me some help here , my tablet is samsung galaxy tab 7.0 Plus , i installed android 4.12 jelly bean , but it was 3.2 honeycomb before i upgraded to 4.12 jelly bean ,well , i'm proud of it , its smoother then the honeycomb but after a few months , my tablet suddenly just displaying a samsung logo for .... forever .. i downloaded the firmware from samsungupdate.com and i probably understand it's because the rom , i flashed the rom using Odin 3,07 with 4.12 jelly bean firmware that for indonesia region , here's the version of the firmware that i flashed to my tablet "P6200XXMD6_P6200OLBMD5_P6200XXMC3_HOME.TAR.MD5 " please note that my tablet can't open/show the recovery system , it just went black when i went to recovery system , soo i just flashed the rom again , it's because the tablet just showing samsung logo forever , never goes to window , and i flashed the rom with similar firmware but not for the indonesia region , the international one , andd after i flashed , it successfully install the same firmware ( 4.12 jelly bean ) well , it's fix the frozen samsung logo , but after it's showed the samsung logo , it just showed a blank screen of dead , the installazation is success but not fixed my tablet , well i still cant open the recovery mode, it's just showed a blank screen just like before i flashed the same firmware , PLEASE help
Your forum
http://forum.xda-developers.com/galaxy-tab-plus
Sent from my GT-N7100 using XDA Free mobile app
priyana said:
Your forum
http://forum.xda-developers.com/galaxy-tab-plus
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
wut ?? isn't this the galaxy tab forum ... it thought i can ask a question here , but thanx anyway
Yeah. Galaxy Tab. You know, the 7" original. GT-P1000. Not at galaxy tab.
Sent from my GT-N7100 using XDA Free mobile app
Hello Everyone, I'm from Nepal. I have also same problem after few days. I search in google and YouTube also but not solve my problem. then i use my technical ideas on SM T561 tab, and I'm Shocked its open and working properly. if you also want to do that plz download Miracle Thunder 2.82 and Odin. install Miracle thunder and open, connect your Samsung tab with pc or laptop, on Miracle Thunder choose Samsung button, scan you Samsung port, model> Auto detect, mode > download, then select factory reset and click Go and wait. now your tab download mode then go to Odin and flashing your Samsung tab original firmware from website and flashing your tab. 100% its work. Thank you and sorry for my poor English.
https://www.facebook.com/softktm

[Q] Bricked Galaxy Mini

Hi, I live in Egypt for a while and I bought last month a Mini. Everything was going just fine, I was using Odin many times to try new roms, and CWM Recovery to give a try to custom roms, without problems. Yesterday morning I flashed my device with the 2.3.6 rom that I found on this forum, apparently made for Latin America. Since that moment, my mobile is on boot loop, i can't do anything, I only can access downloading mode, I tried to reflash gingerbread 2.3.4, and2.3.5, it goes well, Odin gives me the PASS message, but still my mobile is forever rebooting at Samsung logo. I can't access recovery.
What to do? Is it bricked and do I have to send it to Samsung Center or is there hope to fix it by myself?
Thank you for any help...
Yohan
u cant even enter recovery?if u can,just wipe cache and data..
Sent from public phone using 10cents.
ybregeon said:
Hi, I live in Egypt for a while and I bought last month a Mini. Everything was going just fine, I was using Odin many times to try new roms, and CWM Recovery to give a try to custom roms, without problems. Yesterday morning I flashed my device with the 2.3.6 rom that I found on this forum, apparently made for Latin America. Since that moment, my mobile is on boot loop, i can't do anything, I only can access downloading mode, I tried to reflash gingerbread 2.3.4, and2.3.5, it goes well, Odin gives me the PASS message, but still my mobile is forever rebooting at Samsung logo. I can't access recovery.
What to do? Is it bricked and do I have to send it to Samsung Center or is there hope to fix it by myself?
Thank you for any help...
Yohan
Click to expand...
Click to collapse
Just remove the battery and stop your phone.
Put the battery in again.
Go to recovery mode by pressing Home + Power button at the same time.
In the reocevey choose wipe data/factory reset option.
Reboot your device after you are done.
You mobile will boot up fine.
Thank you for your answers but I wanna insists on a point: I can't access recovery at all, the phone show me the samsung logo for about half a second then restarts, and is looping in this state. No recovery, only downloading mode and RAMDUMP Mode (ARM9 mode) & Emergency Dload Mode (ARM9 Mode). Nothing else is avalaible.
Helppp
ybregeon said:
Hi, I live in Egypt for a while and I bought last month a Mini. Everything was going just fine, I was using Odin many times to try new roms, and CWM Recovery to give a try to custom roms, without problems. Yesterday morning I flashed my device with the 2.3.6 rom that I found on this forum, apparently made for Latin America. Since that moment, my mobile is on boot loop, i can't do anything, I only can access downloading mode, I tried to reflash gingerbread 2.3.4, and2.3.5, it goes well, Odin gives me the PASS message, but still my mobile is forever rebooting at Samsung logo. I can't access recovery.
What to do? Is it bricked and do I have to send it to Samsung Center or is there hope to fix it by myself?
Thank you for any help...
Yohan
Click to expand...
Click to collapse
hey man i've already had that problem..coz i flash 2.3.6 and encountered same problem but i manage to fix it.. you need to enter recovery mode... Note: you need to hold the home & power button and wait for the samsung logo to flash TWICE (2X),when the 2nd logo flash, just realease the buttons and your on recovery mode.just wipe/ data reset.. right now im using Ginger bread 2.3.6JKVT and its rooted also.
No, I can't access recovery sorry.
Connect your phone to your laptop.
Use ADB
Type this :
adb shell reboot recovery
That will take you to download mode,then you can flash rom again. It would be easier if you have a CWM installed
Sent from my GT-I5500-MADTEAM using Tapatalk
Shall I use Downloading mode to do this?
ybregeon said:
Shall I use Downloading mode to do this?
Click to expand...
Click to collapse
If you can't access recovery either falsh CWM recovery or Flash another firmware from Download mode. If you want to flash CWM recovery just follow the link below for Galaxy Mini and search CWM recovery.
I tried many times, since i have this problem, to flash and reflash, official roms, CWR, but nothing works, setup goes fine according to Odin, but still have the problem on my phone, still only downloading mode works, and still a flashing screen, just during the samsung logo.
No one can help me with my mobile???
ybregeon said:
No, I can't access recovery sorry.
Click to expand...
Click to collapse
did you wait for the samsumg logo to flash tiwce while holding the combo key? you see when im installing firmware using odin my laptop turn off coz i dont have a battery i thought my mini was brick because the process was not finish,so what happen i tried to acces recovery mode its only shows a computer icon & phone icon. but i manage to fix the problem i go to download mode and flash again another firmware. and everything goes fine..so how come that you cant access recorvery...i would suggest that you flash a firmware with 4 parts not a single package.
just try this www*mediafire*com/?br3r8fod5g3vud4 flash this firmware with Odin this will surely work please replace * with . brace my post count is not enough to post outside link
As long as you can enter download mode... you are safe. If you can... just flash it back with Odin.
Follow this step
http://forum.xda-developers.com/showthread.php?t=1107331
Thanks but no
dhlalit11 said:
just try this www*mediafire*com/?br3r8fod5g3vud4 flash this firmware with Odin this will surely work please replace * with . brace my post count is not enough to post outside link
Click to expand...
Click to collapse
Thank you for the link, i tried but still have the same problem. Could this be an EEPROM problem?
ybregeon said:
Thank you for the link, i tried but still have the same problem. Could this be an EEPROM problem?
Click to expand...
Click to collapse
Try booting up without micro sd nor sim card.
Sent from my neighbour’s android phone
i had a same problem too.
my phone cannot power on, and ONLY download mode only working.
i flashed it for so many time too, and it doesn't seem to fix the problem.
so any fix on this ?
To ybregeon and Tre3,
I had the exact same issue, only Download Mode and RAM Dump, but could not enter recovery mode. Tried flashing many ROMs, oneclick unbrick, Heimdall recovery etc. but still no solutions available, I tried many-many tricks with no luck. So I went to Samsung Service Center, and it turned out that the problem is in the mainboard. It took me one night before Samsung replaced the mainboard from my phone and it's been working well since. All free of charge.
I hope your warranty is still valid. Good luck.
Sent from my GT-S5570 using XDA App
distan7 said:
To ybregeon and Tre3,
I had the exact same issue, only Download Mode and RAM Dump, but could not enter recovery mode. Tried flashing many ROMs, oneclick unbrick, Heimdall recovery etc. but still no solutions available, I tried many-many tricks with no luck. So I went to Samsung Service Center, and it turned out that the problem is in the mainboard. It took me one night before Samsung replaced the mainboard from my phone and it's been working well since. All free of charge.
I hope your warranty is still valid. Good luck.
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
reflash the XXKPI/XXKPK 2.3.4 then flash the cmw, xxkpi and xxkpk is the safest stock gb rom to install
Flash odin and go to recovery mode and wipe.
It should work.

[Q] My Screen dead after trying to remove yellow triangle......dev plz help...!!!

Plz help i tried to remove yellow triangle from boot screen
i think it went sum thing wrong....d screen turn black and cant get it right....else boot sound runs wen i re boot my device....
plz help me devs....need assistance...
More information about the situation please...
How you managed to ACHIEVE this..
Can you go to Recovery /download mode?
no i cant able to....
i cant able c anything behind
You need come up with more words Sir! Help me isnt enough.
Where you using JIG method to remove triangle or TriangleAway app (from Playstore)?
Ok I think you flashed s2 bootloader to remove triangle and counter.So it is absolutely normal for the screen to go blank.But your devices isn't dead.Now flash a rom which contains the boot loader.Maybe LPF will suite you.Here is the link.
Now since you dont see anything on the screen,do this to enter download mode:
1.remove your battery
2.insert it after 5 secs.
3.Hold vol down+home+power button for 10 secs
4.count 10 and then press vol up again.
5.Now connect your phone to pc and odin will detect it and use the guide I link above to flash the rom.
And yeah you wont see anything in the screen during this process.
my phone (galaxy note) after root and when i go wipe data then my phone suddenly appear the yellow triangle and just hang there.i cant even go recovery mode and on my phone.can i use this method also?
weiverpool said:
.can i use this method also?
Click to expand...
Click to collapse
Didn’t you read the part about posting more info? How did you root? Did you root from GB or ICS, what else did you do? ROM and Kernal?
And of course, are you using the international GT N7000 Note??? Note the model.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
weiverpool said:
my phone (galaxy note) after root and when i go wipe data then my phone suddenly appear the yellow triangle and just hang there.i cant even go recovery mode and on my phone.can i use this method also?
Click to expand...
Click to collapse
no u can download apk link from below link :
http://forum.xda-developers.com/showthread.php?t=1494114
and follow the steps from youtube video link below:
http://www.youtube.com/watch?v=Aa-t-8ypcYs&feature=g-user-u...

[Q] Im stuck

I just finished installing the new slimrom 4.3 beta..everything was fine until j tried to restore the backup data. Now im stuck on galaxy s screen without being able to to get into recovery mode..when i connect galaxy with Usb port im stuck with a loading screen..i have tried to find similar thread about this problem but i couldnt.. Any help will be appreciated
backup data from which version? GB?
Sent from my GT-I9000 using xda premium
compacity said:
backup data from which version? GB?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Whats GB? Im relativelly new to this kind of stuff..im really stuck and nothing seems to work..im thinking of ordering a jig from amazon
GB=GingerBread... goto "settings" then scroll down to the bottom where it says "about phone" click on it the look where it says "Android Version" what does it say?
mogios24 said:
I just finished installing the new slimrom 4.3 beta..everything was fine until j tried to restore the backup data. Now im stuck on galaxy s screen without being able to to get into recovery mode..when i connect galaxy with Usb port im stuck with a loading screen..i have tried to find similar thread about this problem but i couldnt.. Any help will be appreciated
Click to expand...
Click to collapse
Does download mode work? You can access it by holding volume down+home+power. Even though you could not access recovery, you should still be able to use download mode + odin and reflash new rom.
i have tried down vol+ home + power and its not working..i ll try now with odin since its my last chance..thanks for your help
mogios24 said:
i have tried down vol+ home + power and its not working..i ll try now with odin since its my last chance..thanks for your help
Click to expand...
Click to collapse
Entering download mode could be tricky sometimes if you didn't press (and hold for several seconds) all buttons simultaneously, the phone would just reboot. Also I've read that there could be different button combos on different SGS1 variants (e.g. http://forum.xda-developers.com/showthread.php?p=14391773#post14391773).
Here are some instructions, how to flash using odin, however, i doubt odin could detect your phone without download mode or phone fully booted.
http://forum.xda-developers.com/showthread.php?p=44710247#post44710247
Problem solved..thank you guys for your help..manage to install the new slimrom 4.3

[Q] Ultimate brick

I rooted my sgs 3 mini and install custom ROMs. I loaded CM 11 (4.4.2 kitkat) from Maclaw.pl. It worked, but after few weeks, my fhone just suddenly shut down. Tried to unroot it via odin + stock ROM, but nothing happens. Or something happens, there is the samsungs own bootlogo back. But the phone is stuck on that logo. Funny part is that when I put a charger on, there appears maclaws panda charging logo. I tried to load stock charging logo via odin, but nothing happens. Phone won't get to recovery mode, but the download mode works. Any ideas what to do? Except to throw it to trash can...
If the download work so
Recovery also need to work
Try again
Also did you try flash by Odin
Sent from my GT-I8190 using xda app-developers app
oldmen said:
If the download work so
Recovery also need to work
Try again
Also did you try flash by Odin
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Won't go to recovery, have tried few weeks now. Download work, when tried to go recovery, it just showing the samsungs bootlogo
And yes tried flash stock ROM by odin plenty times.
Problems
Guys, i think i have similar problem. I rooted my sgs 3mini and put maclaw.pl kitkat 4.4.2, now after downloading some photos my mobile turned off, i tried to turn it on but it shown only: "samsung galaxy s3 mini i8190", after that restarted and now it wont even turn on...
Is there anything to save this mobile or? Iam soo angry on my self and on mobile -.-
blodrayn said:
Guys, i think i have similar problem. I rooted my sgs 3mini and put maclaw.pl kitkat 4.4.2, now after downloading some photos my mobile turned off, i tried to turn it on but it shown only: "samsung galaxy s3 mini i8190", after that restarted and now it wont even turn on...
Is there anything to save this mobile or? Iam soo angry on my self and on mobile -.-
Click to expand...
Click to collapse
Sad to hear :/ Hope someone can help us
Try this forum maybe will help you http://forum.xda-developers.com/showthread.php?t=2159660
Sent from my GT-I8190 using Tapatalk
oldmen said:
Try this forum maybe will help you http://forum.xda-developers.com/showthread.php?t=2159660
Sent from my GT-I8190 using Tapatalk
Click to expand...
Click to collapse
Thanks, but as I said, nothing happens. I have tried many times to flash stock firmware. I have read many posts and tips but it looks like that there is nothing to do :/
Staattius said:
Thanks, but as I said, nothing happens. I have tried many times to flash stock firmware. I have read many posts and tips but it looks like that there is nothing to do :/
Click to expand...
Click to collapse
It could be something with a corrupt param or something. Have you tried the service firmware also, not just the stock firmware?
Enable 3 button combo for recovery, do a factory reset and it will boot.
http://forum.xda-developers.com/showthread.php?t=2157105
deconectat said:
Enable 3 button combo for recovery, do a factory reset and it will boot.
http://forum.xda-developers.com/showthread.php?t=2157105
Click to expand...
Click to collapse
Tried, didn't work. Thanks for trying to help
You kan fix your phone like this
1. Download the pit file. If your phone is variant with 8Gb internal memory. Warning this pit file is only for 8Gb internal memory galaxy s3 mini all variant (i8190 i8190N i8190L) for the 16Gb variant googlelit for pit file
2. Put your phone on Download mode , conect usb cable to the phone and tick "re-partition" box
3. Choose on PIT tab your pit file from your pc where you downloaded
4. Choose on PDA tab the Stock room wat you want to flash.
5. Put again the phone in "Download mode" open again ODIN chose PDA and flash Stock Recovery. Be careful that the box is not checked "re-partition". Flash Normal. Warning this way increase binary count on Download mode. After reboot
6. Put your phone on recovery mode by holding the keys "HOME+VOLUME UP+POWER BUTONS and wipe factory reset,cashe partition and reboot the phone. Voala the phone is Works.
Follow the instructions as in the picture
joker79 said:
1. Download the pit file. If your phone is variant with 8Gb internal memory. Warning this pit file is only for 8Gb internal memory galaxy s3 mini all variant (i8190 i8190N i8190L) for the 16Gb variant googlelit for pit file
2. Put your phone on Download mode , conect usb cable to the phone and tick "re-partition" box
3. Choose on PIT tab your pit file from your pc where you downloaded
4. Choose on PDA tab the Stock room wat you want to flash.
5. Put again the phone in "Download mode" open again ODIN chose PDA and flash Stock Recovery. Be careful that the box is not checked "re-partition". Flash Normal. Warning this way increase binary count on Download mode. After reboot
6. Put your phone on recovery mode by holding the keys "HOME+VOLUME UP+POWER BUTONS and wipe factory reset,cashe partition and reboot the phone. Voala the phone is Works.
Follow the instructions as in the picture
Click to expand...
Click to collapse
Your pit-file have password protection?
Filpus said:
Your pit-file have password protection?
Click to expand...
Click to collapse
No
joker79 said:
No
Click to expand...
Click to collapse
Trying to unrar goldenxx.rar
and then comes this. its finnish and it says password needed
http://gyazo.com/9531e2ba608d103d39de9f51b32e9738
Try Now
Filpus said:
Trying to unrar goldenxx.rar
and then comes this. its finnish and it says password needed
http://gyazo.com/9531e2ba608d103d39de9f51b32e9738
Click to expand...
Click to collapse
Sorry i forgot the arhive have password. Try now i put a new arhive without password.
joker79 said:
Sorry i forgot the arhive have password. Try now i put a new arhive without password.
Click to expand...
Click to collapse
does not work :/ oh sorry forgot link http://gyazo.com/17371b77ef82a2f3804342284bdd3854
Filpus said:
does not work :/ oh sorry forgot link http://gyazo.com/17371b77ef82a2f3804342284bdd3854
Click to expand...
Click to collapse
You tick the box "re-partition" on odin ?
joker79 said:
You tick the box "re-partition" on odin ?
Click to expand...
Click to collapse
yep
Joker, have you found solution of this issue?
I have the same problem, also tried lot of thighs but nothing helped. Every try of using pit end-up with message "there is no pit partition", but stock FW I can falsh with no troubles.
Still the same behaviour only logo after staring phone and cannot get into recovery menu...

Categories

Resources