Database Develop

[SOLVED] Soft brick D405n need a little help.

Rooted LG D405n, nothing done to the software beyond that (unless you count having zooper/nova launcher configured on it). Gave the phone to a friend for a short while and she decided to update the software using the LG software update on the phone. After she selected install on the latest update which came out not long ago and was supposedly going to update the apps, it restarted and got stuck on boot screen with Boot Ceritification Error [560].
I've tried this guide http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479 but I got stuck on step 4. because I cannot make the PC recognize the device (it does not show up at all), so the LG tool can't install USB drivers. If i try to do it manually (it gives me an option to select a device from a list) it doesn't seem to do anything, just gets stuck on the Downloading USB driver window.
I can put the phone in Firmware Upgrade Mode just fine, but it doesn't seem to do anything useful. The PC still won't recognize the device, however I can hear the 'usb pluged in' sound (I'm on Win7).
Did a factory reset, didn't help.

Asayanami said:
Rooted LG D405n, nothing done to the software beyond that (unless you count having zooper/nova launcher configured on it). Gave the phone to a friend for a short while and she decided to update the software using the LG software update on the phone. After she selected install on the latest update which came out not long ago and was supposedly going to update the apps, it restarted and got stuck on boot screen with Boot Ceritification Error [560].
I've tried this guide http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479 but I got stuck on step 4. because I cannot make the PC recognize the device (it does not show up at all), so the LG tool can't install USB drivers. If i try to do it manually (it gives me an option to select a device from a list) it doesn't seem to do anything, just gets stuck on the Downloading USB driver window.
I can put the phone in Firmware Upgrade Mode just fine, but it doesn't seem to do anything useful. The PC still won't recognize the device, however I can hear the 'usb pluged in' sound (I'm on Win7).
Did a factory reset, didn't help.
Click to expand...
Click to collapse
You could try the LG Support Tool. Not sure it will work but it's worth a shot. The problem with the phone not getting detected by the PC is the fact that 1) The OS was upgraded by your friend and 2) The factory reset you performed . Both of those acts would have disabled USB debugging hence no device detected.
I unfortunately have no encouraging information to give you.

shinobisoft said:
You could try the LG Support Tool. Not sure it will work but it's worth a shot. The problem with the phone not getting detected by the PC is the fact that 1) The OS was upgraded by your friend and 2) The factory reset you performed . Both of those acts would have disabled USB debugging hence no device detected.
I unfortunately have no encouraging information to give you.
Click to expand...
Click to collapse
It appears that I have fixed it.
Since The tool would not download the USB drivers by itself I went to the LG website and got them manually, installed them and restarted the PC.
After that I launched the LG Mobile Support Tool, but it still didn't see the device.
However, I clicked Options and Upgrade Recovery. It asked me for my IMEI. I put the phone into Firmware Upgrade mode and the program started upgrading the phone.
After it was all done, the phone restarted, and the software update simply said that instalation failed, I have lost root but everything else seems fine. Rooted again with towelroot and I'm back in game.

Asayanami said:
It appears that I have fixed it.
Since The tool would not download the USB drivers by itself I went to the LG website and got them manually, installed them and restarted the PC.
After that I launched the LG Mobile Support Tool, but it still didn't see the device.
However, I clicked Options and Upgrade Recovery. It asked me for my IMEI. I put the phone into Firmware Upgrade mode and the program started upgrading the phone.
After it was all done, the phone restarted, and the software update simply said that instalation failed, I have lost root but everything else seems fine. Rooted again with towelroot and I'm back in game.
Click to expand...
Click to collapse
Well I'm glad you managed to fix it.
Since this issue appears to be solved, please insert '[SOLVED]', without the quotes, at the beginning of your thread title.

Can't acces phone, after pattern was changed

Hello to you all!
So, I have been struggling with this problem for a week. Searching on the Internet and especially on XDA, but I can't find a way to solve this problem.
The problem is with my sister's phone, a Sony Xperia Z1 which we can't unlock anymore. This is since a friend of her changed the unlock pattern as a "joke" and she was so dumb to not remember the new pattern.
As I've already done some research I'll sum up the things I've already tried, which problems I encountered and in which state the phone actually is:
1. The phone is not rooted
2. There is no recovery menu. Obviously tried factory reset but can't acces the menu.
3. USB debugging is not activated. I can't activate it because I can't unlock the phone and acces the settings...
4. Tried to flash it (via FlashTool) to put the recovery menu on it --> failed because not in USB debugging mode
5. I can't connect to wifi
6. There's no gmail account linked
7. The secret code *#*#7378423#*#* does not work (I think because it's updated to Lollipop?)
8. I read about Aroma File Manager, but same problem again. Can't acces it because I can't acces the recovery menu.
If anybody knows another solution to unlock this phone, I would be very grateful (and my sister too )
Looking forward to your answers!

Android blocked

My uncle died, and my aunt gave me his phone. But was locked by a pattern so i wiped out everything at the menu. The phone still locked this time by email... And i read some forums to connect it to pc and change the twrp... But i cant acess to the phone settings to activate the usb debugging. What should i do?
Btw... It'a a wiko jerry 2

Factory reset if you want to lose all data on it

Alcatel Idol 4 6055K problem with firmware

Hello,
I have a somewhat aged Idol 4 lying here.
This no longer boots or it hangs in the boot loop.
So I tried to install an update via a stock rom from the network via the recovery menu and ADB sideload and always got the error status 7. (Alcatel_Idol_4_6055K_01001_01002_OTA)
Resetting the system didn't help here either.
Then I tried to install TWRP on the device.
But unfortunately both methods that I tried failed.
Once via Sahara & firehose-test and the second was Suger QCT via the download mode.
But both of them got the error message NPRG Error 5002.
I have installed suitable USB drivers.
So my question, does anyone have a tip for me on how I could get the device revived?
And Sorry for my bad english

Hm.. said:
Hello,
I have a somewhat aged Idol 4 lying here.
This no longer boots or it hangs in the boot loop.
So I tried to install an update via a stock rom from the network via the recovery menu and ADB sideload and always got the error status 7. (Alcatel_Idol_4_6055K_01001_01002_OTA)
Resetting the system didn't help here either.
Then I tried to install TWRP on the device.
But unfortunately both methods that I tried failed.
Once via Sahara & firehose-test and the second was Suger QCT via the download mode.
But both of them got the error message NPRG Error 5002.
I have installed suitable USB drivers.
So my question, does anyone have a tip for me on how I could get the device revived?
And Sorry for my bad english
Click to expand...
Click to collapse
Hello, I deleted my system from twr without realizing what I was doing, the result is that I stay on the Alcatel logo. My steps were, the installation of sugar, when it starts not to update the application. Choose the 6055 model, since the 6055P model that is mine does not appear in the drop-down. Before starting sugar, turn off the mobile completely and connect it off to the usb of the pc, check if when connecting it the pc does not detect it, use another cable (there are many cables that only serve to charge and not to read on the pc) Now start sugar, choose the model and click on the Udgrade tab. You will surely get several messages saying that the mobile has been modified and that you lose the guarantee, go ahead accepting the message, in a few minutes you will have it ready. Greetings.

Perdigon55 said:
Hello, I deleted my system from twr without realizing what I was doing, the result is that I stay on the Alcatel logo. My steps were, the installation of sugar, when it starts not to update the application. Choose the 6055 model, since the 6055P model that is mine does not appear in the drop-down. Before starting sugar, turn off the mobile completely and connect it off to the usb of the pc, check if when connecting it the pc does not detect it, use another cable (there are many cables that only serve to charge and not to read on the pc) Now start sugar, choose the model and click on the Udgrade tab. You will surely get several messages saying that the mobile has been modified and that you lose the guarantee, go ahead accepting the message, in a few minutes you will have it ready. Greetings.
Click to expand...
Click to collapse
Hello, thanks for the answer and the download.
I've tried the same way. I still downloaded your file and tried as you described.
Unfortunately I got the same error NPRG Error 5002 again.
Unfortunately I have no idea where the problem could be.

I found out that it could be a memory error.
As if a flash process had failed and there is no longer a correct series of partitions.
So I would need a complete original rom and would have to flash it via fastboot.
I could also try it via twrp, but I don't get this flashed.
And I don't have a complete original rom either.

Hello,
So I have now been able to flash the phone with another PC with Sugar QCT after it suddenly started up after the battery was completely empty and I charged it again.
But unfortunately the boot problem persists after turning off the phone again.
Even after replacing the battery with a new one.
Then I tried to flash TWRP via the Alcatel Flasher.
The flash process was successful but there was no TWRP on it after the reboot.
So the problem could still be somewhere else than just the firmware.

Hm.. said:
Hello,
So I have now been able to flash the phone with another PC with Sugar QCT after it suddenly started up after the battery was completely empty and I charged it again.
But unfortunately the boot problem persists after turning off the phone again.
Even after replacing the battery with a new one.
Then I tried to flash TWRP via the Alcatel Flasher.
The flash process was successful but there was no TWRP on it after the reboot.
So the problem could still be somewhere else than just the firmware.
Click to expand...
Click to collapse
Hello, it may be that you are making the same mistake that I made when installing recoveri. When selecting the recovery, note that the twr is the one that weighs about 14 mb and the original one about 24 mb. I think that when you make a copy with the recovery program and then install the twr you select it wrong. In the program, do not make the copy of the recovery, skip that step and go directly to install and select the 14 mb file. You will see that this is the problem. Cheers

[NEED URGENT HELP] with my mi 8

Hello everybody how should i start to explain my problem……
my phone was by the police for 14 months and they tried to crack my password und recover data from it.
They couldn‘t and they send my phone to cellebrite and they couldn‘t do anything too.
Now after 14 months i got my phone back and i charged it first of all and then i powered it on (sry for my bad english).
I started the phone and all i can see is that my phone is stuck in recovery mode now,
when i try to reboot to system it will boot up to recovery mode again with a error message „This MIUI version can‘t be installed on this device“.
I tried to Connect with MiAssistant but when i choose „connect with MiAssistant“
and connect my phone with my PC, MiAssistant don‘t show any devices.
How can i Boot to ROM without loosing my data ? I need everything whats on the Phone especially the installed apps with saved login data.
I need my phone like it was before they took the phone from me. Is it possible ? Can somebody help my with my Problem ?
I think they opened my phone to do EDL because my backplate seems to be opened like you can see on the pictures i attached.
Before they got my Phone, my phone was i think rooted but i cannot remember any more but it had 100% installed TWRP which is gone now too,
and my bootloader is locked and i dont know if USB debugging is on or off now.

same here

mxmix said:
Hello everybody how should i start to explain my problem……
my phone was by the police for 14 months and they tried to crack my password und recover data from it.
They couldn‘t and they send my phone to cellebrite and they couldn‘t do anything too.
Now after 14 months i got my phone back and i charged it first of all and then i powered it on (sry for my bad english).
I started the phone and all i can see is that my phone is stuck in recovery mode now,
when i try to reboot to system it will boot up to recovery mode again with a error message „This MIUI version can‘t be installed on this device“.
I tried to Connect with MiAssistant but when i choose „connect with MiAssistant“
and connect my phone with my PC, MiAssistant don‘t show any devices.
How can i Boot to ROM without loosing my data ? I need everything whats on the Phone especially the installed apps with saved login data.
I need my phone like it was before they took the phone from me. Is it possible ? Can somebody help my with my Problem ?
I think they opened my phone to do EDL because my backplate seems to be opened like you can see on the pictures i attached.
Before they got my Phone, my phone was i think rooted but i cannot remember any more but it had 100% installed TWRP which is gone now too,
and my bootloader is locked and i dont know if USB debugging is on or off now.
Click to expand...
Click to collapse
I have a proble like that and can't find solution for that is problem. Maybe test point and into edl mode, we can find the solution.