XT1052 Loudspeaker not working during call! - Moto X Q&A

I installed RAZR ROM Unofficial 5.1.1 and found this bug. The loudspeaker isn't working when I place a call or receive a call.
When I place a call and put it on loudspeaker, I do not get any sound, but the call is still on. When I turn off the loudspeaker, I can hear it still. Is there any way to fix this bug?

Same here. Can't find any info regarding this.

If you flashed the OTA from 4.4.2 up to 5, you need to reflash from scratch and flash the "optional" files (NOT as part of recovery, but have to be done through mFastboot)
Had the same problem, no speakerphone and other glitches. Turns out there's code hiding in the boot.img and modem firmware code that screws up the rest of the system if you don't update them altogether. Turns out L had different boot image and modem firmware, so if you kept KK boot and firmware with L ROM they don't interface together well.

Related

headset issue - not recognized after mod

Hi.
Im on Viper 800, a sense 6 based rom, 5.0.2, lollipop, firmware 7194012.
I flashed this sound mod - http://forum.xda-developers.com/showthread.php?t=2211163
In the description, my phone appears to be supported, along with the sense rom - M7 international.
After flashing, the result was this - great sound on speakers (as it should be), headset no longer recognized (sound only on speakers).
Ok, as I was doing always when facing this sort of problems, I restored a back-up version using TWRP. No matter how bad the software was messed up, this worked every time.
Not this time = the headset no longer recognized (sound only on speakers).
OK, I am writing an older back-up version = the same result.
Ok, maybe some scripts or libraries are corrupted, I am installing a NEW lollipop rom, after full wipe = the same result.
Ok, I am installing a fresh new rom, Kit Kat based = the same result.
The problem is that the automatic selection of speakers/headset is no longer functioning. I installed Soundabout apk, with allows you to manually route the sound on speakers or headset and it WORKS, but I cannot live with that - I want to repair this process in order to be automatic, as normal.
I need to understand wth is corrupted and how can I fix this...
Thank you in advance.
dabuHTC said:
Hi.
Im on Viper 800, a sense 6 based rom, 5.0.2, lollipop, firmware 7194012.
I flashed this sound mod - http://forum.xda-developers.com/showthread.php?t=2211163
In the description, my phone appears to be supported, along with the sense rom - M7 international.
After flashing, the result was this - great sound on speakers (as it should be), headset no longer recognized (sound only on speakers).
Ok, as I was doing always when facing this sort of problems, I restored a back-up version using TWRP. No matter how bad the software was messed up, this worked every time.
Not this time = the headset no longer recognized (sound only on speakers).
OK, I am writing an older back-up version = the same result.
Ok, maybe some scripts or libraries are corrupted, I am installing a NEW lollipop rom, after full wipe = the same result.
Ok, I am installing a fresh new rom, Kit Kat based = the same result.
The problem is that the automatic selection of speakers/headset is no longer functioning. I installed Soundabout apk, with allows you to manually route the sound on speakers or headset and it WORKS, but I cannot live with that - I want to repair this process in order to be automatic, as normal.
I need to understand wth is corrupted and how can I fix this...
Thank you in advance.
Click to expand...
Click to collapse
Afaik, sounds mod only make changes in the /system partition so restoring a nandroid backup or re-flashing the rom should fix any bug caused by the mod. Maybe its an hardware problem...
One thing that I love about Android is that no matter how deep was the **** I entered when flashing things, I never got stucked. Never, ever, and I had like 12 Android phones, rooting them all. Reading some tutorials, some topics, asking other guys.. I always solved the problems, by myself or with some help, without going to the service.
I fixed this. I wrote a fresh CM12, the result was the same (course), but out of despair, i pulled in/out the handset jack for SEVERAL times, while the music was playing and....it came back to its senses - the selection for sound output is automated again.
Thanks.
PS. It was software, not hardware - I explained above what happend when using Sound About.
The thread can be closed.
dabuHTC said:
I fixed this. I wrote a fresh CM12, the result was the same (course), but out of despair, i pulled in/out the handset jack for SEVERAL times, while the music was playing and....it came back to its senses - the selection for sound output is automated again.
Thanks.
PS. It was software, not hardware - I explained above what happend when using Sound About.
The thread can be closed.
Click to expand...
Click to collapse
Sounds more like an intermittent hardware problem. Flashing a new rom will wipe the sound mod from /system. Maybe there was some dirt in the jack and that pulling the plug in and out several time cleaned it. It might only be a coincidence if it happened after flashing that sound mod. Anyway glad to know its now fixed. :good:

Camera stopped working and no audio after flashing LG G4 can't make calls

Model number: LG-H811
Andriod version: 6.0
Andriod security patch level: 2016-01-01
Software version: H81120i
I need assistance resolving the issue i have with my phoone
I flashed my phone with the above details, after I successfully unlocked the boot loader, with LineageOS 14.1
(before I was successful in flashing my phone I had dead andriod logo when I attempted to boot to recovery mode).
After LineageOS started I realized my audio wasn't working.
I couldn't play music the music app AudioFX kept crashing when I attempted to play
a songs.
Youtube videos will play but with no audio. Each time I rebooted the phone it will take a while loading andriod apps before
starting up which did not use to be the case.
I realized I also couldn't make calls and can't receive calls either.
I have flashed the phone with the LG Tool (LG UP) with a stock kdz file that matches my original version, but this hasn't resolved the issue.
It shows my bootloader unlocked at ever start up of the phone and there's no sound (when there used to be) when the T-mobile logo is displayed before andriod OS boots up. I have tried running diagnostics which the hidden menu but the EFL Test crashes.
When I lower my volume to vibration mode the andriod OS starts to hang and I have to reflash or factory reset before I can use the phone.
Wifi is working. Tethering is also working I haven't tested any other features.
Neither the camera (camera stopped working *crash) nor the flash (flashlight app) works.
At this point I don't know if it is a hardware issue or software related
I need help to resolve these issues
thanks
you must upgrade to the latest kdz file before flashing a rom
seetru said:
you must upgrade to the latest kdz file before flashing a rom
Click to expand...
Click to collapse
Thanks very solid I used the LG bridge tool it updated my phones firmware and resolved all the issues thanks
I'm going to attempt to flash my phone again

Motorola G6 no sound during calls after flash

Hello,
I have a motorola G6 that after bad root get stuck on bootloop.
I flash the phone with two roms but the phone after flash dont have sound during calls, the earpice dont work even in loudspeaker, but the phone rings when is receving calls.
anyone already have this problem?
tanks
This question is probably in the wrong section but anyway...I did. I never checked the phone prior to rooting so I'm not sure if a "bad root" was the cause or not. However, I experienced the exact same problem as you. I was originally on build OPS27.82-19-4 so I reflashed stock OPS27.82-19-4 as described here. But I still had the same problem. On a whim I randomly flashed build OPS27.82-19-4 following the same instructions. The phone has been working great ever since (I have it rooted, xposed. etc...). Not sure why there was a problem, or if reflashing the newer build "fixed" it or not...but as I said, all is good now. FWIW, when I check the sim status in settings>about phone, the network section is blank. It was blank when I had problems too.
Perhaps this will help you..
PS When I reflashed the firmware, the phone would boot into fastboot mode, then when I selected "Start" it would boot to the OS. If you run into that, here is how it was fixed. See posts 5, 6, 7, & 8.
Good luck!
I had a similar problem, I did the root, TWRP, I ended up giving up and flash again on the stock of the bike G6 Play (Brazil) available here in XDA, to my surprise, he made and received calls normally, the speaker for music and connections of other applications (Whatsapp, Messenger, Hangouts, etc.), but it did not work for the rom dialer.
I thought I had a problem, it was when a system update appeared, I installed it and it worked again.
I figured it was some rom bug I installed.
Tanks for the help.
I solved the problem flashing the phone with flashrom.bat instead of put the comand one by one.
Many tanks
Multiredes said:
Tanks for the help.
I solved the problem flashing the phone with flashrom.bat instead of put the comand one by one.
Many tanks
Click to expand...
Click to collapse
That's because a custom rom or GSI does not have all the necessary files. 99.9% of the time, flashing stock will fix a problem.

Mic fail in call - no sound transmitted

Hello,
This has been driving me nuts. I can't be heard in normal calls, the mic picks up nothing.
I am using global 9t pro.
I have tested the hardware and the mic is working. Speakerphone works also. All roms tried present the same problem (stock, lineage, Xiaomi.eu). I have now clean flashed stock MIUI 10 and updated to 11 and problem remains.
I've read there can be sim reader problems, but speakerphone seems to work. I've read there can be audio routing problems relating to headset with mic being detected, but I can't find evidence the phone thinks there is a headset connected. I've disabled Google Assistant and the problem remains.
What puzzles me is that even after a complete clean flash of stock rom there is no improvement.
Any advice would be greatly appreciated.
Thanks
dvns said:
Hello,
This has been driving me nuts. I can't be heard in normal calls, the mic picks up nothing.
I am using global 9t pro.
I have tested the hardware and the mic is working. Speakerphone works also. All roms tried present the same problem (stock, lineage, Xiaomi.eu). I have now clean flashed stock MIUI 10 and updated to 11 and problem remains.
I've read there can be sim reader problems, but speakerphone seems to work. I've read there can be audio routing problems relating to headset with mic being detected, but I can't find evidence the phone thinks there is a headset connected. I've disabled Google Assistant and the problem remains.
What puzzles me is that even after a complete clean flash of stock rom there is no improvement.
Any advice would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
Hello I had a similar problem, my autorotation and mic started to fail and I got confused, after some research it turns out if I flash MIUI 11 and go back to MIUI 10 a partition called persist gets deleted and it completely messes up your sensors and it won't get fixed regardless you flash another rom, what I did was download fastboot rom and flash it. If that doesn't fix it extract the persist.img from the rom files and flash it through TWRP and it should go back to working. Wait now that I think about it you try flash persist.img from the files and if it doesn't work then you flash the fastboot rom. Good luck

No loudspeaker/microphone during calls

i have following problem: i got a xz1c without original firmware. i have no backup with the Stock-Rom. I installed twrp and flashed lineageos16 lilac. everything works excepted the microphone and speaker during a call. That means: i can start the call, and it is ringing at the other person, but i can't hear anything. no connection ring and no voice. the other person can't hear me also. microphone and sound/loudspeaker works in all other apps (i tested music-player, voicemail, recorder). i tried different call apps. nothing works.
the big problem is: i can't switch back to firmware because it doesn't exist as backup. i can't flash other ROM, because this lineage version is the only one i can flash. RR, AOSP, etc. failed all during installation.
what can i try? Has anybody a backup from firmware of the g8441, i can try?
i tried with a lot different files, for example androidfilehost.com/?w=files&flid=274221
either the filelink is broken or the flash failed during flashing.
i get crazy :-/
p.s.: I'm no expert in flashing phones, so please be sorry if i don't understand everything or if i use wrong words for explaining
bluetit said:
what can i try?
Click to expand...
Click to collapse
Use EMMA to get you back to stock.
bluetit said:
i have following problem: i got a xz1c without original firmware. i have no backup with the Stock-Rom. I installed twrp and flashed lineageos16 lilac. everything works excepted the microphone and speaker during a call. That means: i can start the call, and it is ringing at the other person, but i can't hear anything. no connection ring and no voice. the other person can't hear me also. microphone and sound/loudspeaker works in all other apps (i tested music-player, voicemail, recorder). i tried different call apps. nothing works.
the big problem is: i can't switch back to firmware because it doesn't exist as backup. i can't flash other ROM, because this lineage version is the only one i can flash. RR, AOSP, etc. failed all during installation.
what can i try? Has anybody a backup from firmware of the g8441, i can try?
i tried with a lot different files, for example androidfilehost.com/?w=files&flid=274221
either the filelink is broken or the flash failed during flashing.
i get crazy :-/
p.s.: I'm no expert in flashing phones, so please be sorry if i don't understand everything or if i use wrong words for explaining
Click to expand...
Click to collapse
Hi!
Did u install Ainur Sauron and tweaked sauron.useroptions? If that's the case, look, under
"Experimental Qualcom only options",
did u set the option in line 82 "COMP=true" ?
I think, by removing the headphone compander from audio mixer s.th. goes wrong with routing to the right audio output channel, again.
Just from interest: perhaps u could check, if u have some pluggable headphones near u, if the left channel is a lot quieter?
Had this, I would call it "Xperia-Head-/Earphone issue", comin from Stock .228, after clean and fresh install of that unofficial one in LOS 16 1.0 (unofficial). I wondered, that after flash-routine, but before installing Ainur in Magisk, with my all-time-useroptions for sauron, still in internal memory (I didnt wiped internal memory, btw.) A friend was calling me, and everything was fine.
In the afternoon, after flashing Sauron, with this COMP-option set to true, same issue again. I had a few more options ticked, but that one seemed to make a lot more sense to me, not to be used with my XZ1c, again.
This will help u, perhaps.
U don't need to flash anything, if evreything is proper installed and working fine, except ur "Xperia-Head-/Earphone issue".
Greetz, brockn

Categories

Resources