Related
Okay, I'm stumped. I'm already getting a replacement device from HTC under warranty so my problem is solved, but like many of you, I HATE NOT HAVING AN EXPLANATION FOR THINGS!
I'm also wondering if anyone else has had this problem? About 10-Days ago my Kaiser (Tilt) stopped charging via the automotive charger. The A-C charger works fine, but the vehicle charger sent to me with my device from AT&T completely stopped charging my device. I went to the AT&T store & bought a new charger, It didn't work. I changed power points, & cigarette lighter in the vehicle &, it wouldn't work. I tried the charger in the vehicle of two different AT&T sales guys & also tried multiple chargers, & it wouldn't work. Is there any reason why the unit would lose it's ability to charge via a vehicle charger while still retaining it's ability to charge through USB to computer & through the A/C home charger? It seems to me that if the charge portion of the MB was fried, then all charging would be affected.
So how can my device charge fine through all means EXCEPT the vehicle charger?
Again, AT&T is sending me a new device, but I hate not having an explanation for the problem, drives me Nucking Futs!!!
Any ideas, anyone?
Thx!
I dont want to sound rude but have you checked your power settings?
Under the "Advanced" it has a option for "When device is turned on, do not charge the battery when connected to the PC."
If this is ticked it will not charge via the in car charger.
It's a known issue, not just with the Tilt
I had the same problem with my Axim X50 and X51v.
The original sync/charge cable wouldn't charge from the car's lighter, while non-branded cables did so without any problems at all.
This happened with other Axims as well, so I know that it wasn't a defective unit.
I then purchased an HP Ipaq HW6910, and encountered the same issue with my wife's Mazda 5 - the HW6910 woudn't charge if the cable was connected to the charger, when I started the car. It only worked if the adapter and cable were disconnected while staring the car. This did not happen with my Mazda 3 or my Mitsubishi.
And another thing I discovered, is that some cables are not designed for use with car chargers, but they work perfectly with AC chargers.
I bought a couple of retracting sync/charge cables for my HW6910, they worked only when connected to the mains. But regular cables worked perfectly with both power sources.
Jygar said:
I dont want to sound rude but have you checked your power settings?
Under the "Advanced" it has a option for "When device is turned on, do not charge the battery when connected to the PC."
If this is ticked it will not charge via the in car charger.
Click to expand...
Click to collapse
OF COURSE I DID.
Yeah, It charges fine from the PC, & from an A/C source. But the HTC TYTNII car charger that came with my device, as well as replacement car chargers don't work.
wisniak said:
I had the same problem with my Axim X50 and X51v.
The original sync/charge cable wouldn't charge from the car's lighter, while non-branded cables did so without any problems at all.
This happened with other Axims as well, so I know that it wasn't a defective unit.
I then purchased an HP Ipaq HW6910, and encountered the same issue with my wife's Mazda 5 - the HW6910 woudn't charge if the cable was connected to the charger, when I started the car. It only worked if the adapter and cable were disconnected while staring the car. This did not happen with my Mazda 3 or my Mitsubishi.
And another thing I discovered, is that some cables are not designed for use with car chargers, but they work perfectly with AC chargers.
I bought a couple of retracting sync/charge cables for my HW6910, they worked only when connected to the mains. But regular cables worked perfectly with both power sources.
Click to expand...
Click to collapse
Funny, I just ran out to the truck & grabbed one of the guys Blackberry chargers & it looked like it was working. But SK Tools reports an even bigger (negative) amp draw (like discharging twice the normal rate). So with the BB charger it dischages even faster. Maybe reversed polarity Guess I should've checked first. That's a moot point now though as I await my new unit. Weird though.
Well i was using a BB charger that worked fine up until this morning. i bought my phone when it first came out so it wasnt easy to find a charger made for it at the time. i never had a problem until today. i also noticed that the Usb terminal on my device was bent. i called htc but they charge way too much to fix it. i have no idea how or when the terminal broke but it does still charge when pluged into pc or into the wall. ill have to spend $80 to have ppctechs fix it.
wassup, i`m in SF Cali, I had a att 8525 that was doing the same thing. I assumed it was the phone when it 1st started happening. After a week or so it was bothering me so i started playing with it trying to figure out if it was a setting, bad flash, or hardware. I noticed that if the phone was off it wood charge but not if it was on. I started flashing my phone and testing (for trouble shooting purposes) and for the first 2 or 3 roms problem still existed, then one of the roms i flashed to would turn on the back light as if it was charging but no LED or charge, when this started happening I realized that if i turned my fone off it wood start charging and continue to charge when i booted the fone back up. So if when i got in the car i pluged in/ shutdown/ waited like 45 sec or 1 min. / then booted it would temp. fix the problem for as long as my fone was on the cable. At some point after that many weeks/roms later i noticed it was working correctly again, So I had decided it was a glitch in the rom, But i`m not a Dev. or fone guru so I really dont know what it was, but hope this helps someone.... PEACE!! ~bboyphrog1~beatz`n pieces krooh~
flexte said:
Well i was using a BB charger that worked fine up until this morning. i bought my phone when it first came out so it wasnt easy to find a charger made for it at the time. i never had a problem until today. i also noticed that the Usb terminal on my device was bent. i called htc but they charge way too much to fix it. i have no idea how or when the terminal broke but it does still charge when pluged into pc or into the wall. ill have to spend $80 to have ppctechs fix it.
Click to expand...
Click to collapse
The slight diagonal slant on the bottom right? It's supposed to be like that. All AT&T Tilts (and I'd assume TyTN II's, but I've never had one to compare) have a mini-usb port that looks that way.
i looked at a 8525 and the usb terminal was straight. i even took a pencil and straightened mine out. it should be bent. that wouldn't make sense because the charges slot is not bent. i think the problem is that one side of the terminal is not soldered to the board and can easily be broken. in another thread 3 people have the same issue. as far as the car charger goes ill do some testing but until today it was charging fine while the phone was on.
this issue is known ,it even happens with the htc tynt.... by simlpy rebooting while in the charger it starts working again ..at least with mine.
I've had the same problem. I went to the lcoal AT&T store and they said they never heard of it so I thought it was just me. It looks like many of you have the issue. I wish I knew what it was. It was really bad with my 8525,
i thought Faria developed a cab to fix this issue in the hermes forum? might be worth having a search for it and when i get home i will see if i have a copy on my pc.
any of you guys get anywhere with this? I have exactly the same problem. posted in a couple of other threads actually.
Not sure whether the usb port is damaged, but it's certainly is slightly "down" on the right hand side.
It charges perfectly on the mains and perfectly from usb, but not in the car.
I have used a normal car charger, spent £50 on a Carcomm powered mount and tried one of the separate chargers that you plug the standard mini usb cable into. Nothing works. This is driving me crazy (if you'll excuse the pun!) a the primary reason I bought the Kaiser, was for GPS.
Thanks
well i also just found out 2 of my minisync cables dont work anymore. 1 of them still charges the phone but neither of them sync the phone anymore. it still syncs fine through a normal usb cable.
I am using a moto Razr car charger and it works fine so far.
Okay, confirmed on my replacement Tilt: The USB port is arrow straight. Someone earlier mentioned it being lower on the right side & indeed my DEAD DEVICE was as such. Looks like a bad job of connecting the port to the device.
NOTE!!!!!!
It's a good idea to take a look at your charger before you plug it in to make sure the charger USB connector is not bent or mi-sshappened.
i have the same problem i went through 4 att car chargers adn 5 phones. They are crap. Its not the phone its the charger if you play with it you will see that it comes and goes. The end tip on the charger is bad doesnt make a good connection. i have yet to find a good car charger.
Mine stopped charging using the car charger supplied and a brodit. A friend's kaiser charges OK with the same chargers.
No-one has mentioned it in this thread, but my phone, shows "charging" in the battery control panel and the LED lights up to confirm this. The percentage charge value decreases as though it isn't being charged!
As others have done I noticed that the corner of the plastic centre of the connector nearest the reset hole was slightly bent and I assume (though can't remember doing so) that I missed the reset hole with the stylus tip and pushed it in. Menu driven resets for me from now on!
HTC Europe didn't know anything about this fault, so seem to be happy to repair / replace it under warranty. It's with them at the moment, so I'll have to wait and see.
RSVRover
faria said:
this issue is known ,it even happens with the htc tynt.... by simlpy rebooting while in the charger it starts working again ..at least with mine.
Click to expand...
Click to collapse
that didnt work for me. only one of my chargers work now.
RSVRover said:
Mine stopped charging using the car charger supplied and a brodit. A friend's kaiser charges OK with the same chargers.
No-one has mentioned it in this thread, but my phone, shows "charging" in the battery control panel and the LED lights up to confirm this. The percentage charge value decreases as though it isn't being charged!
As others have done I noticed that the corner of the plastic centre of the connector nearest the reset hole was slightly bent and I assume (though can't remember doing so) that I missed the reset hole with the stylus tip and pushed it in. Menu driven resets for me from now on!
HTC Europe didn't know anything about this fault, so seem to be happy to repair / replace it under warranty. It's with them at the moment, so I'll have to wait and see.
RSVRover
Click to expand...
Click to collapse
Please let me know the outcome. mine is getting worse by the day.
Now I'm confused.
Because the device charges over USB I just assumed it would draw <500mA (the max output of a USB port) but the specs say it draws up to one amp.
Having owned a high-drawing device before (Axim x50v) I know that trying to pull this out of a USB port can blow your motherboard. So are these safe to charge over USB??? How does the device know whether its being charged over USB or mains - are there different charging pins on the connector?
So this is my first motorola and I had heard of the issues they have with non motorola chargers. Now I am experiencing it first hand. With the same ac charger I have charged many phones with and is capable of 1 amp output (D4 charger is only rated at 850 mA) my D4 struggles. With the device off it charged painfully slowly. While on it cannot even charge. It discharges while plugged in despite the charging indicator and reporting "charging (AC)" in status.
How does it know it is not a moto charger? Is it just about the resistance between the data pins? For most other phones shorting the data pins on the charger indicates to the phone that it is a high current charger and not a computer USB port. Is there a similar trick for motorola phones? I would rather not have to purchase an overpriced moto oem car charger. I have a perfectly fine 1.2 amp car charger soldered directly into my car's 12v system behind the dash. Can I make it work?
Thanks!
On a regular basis I successfully charge my D4 using both a charger from a Samsung Reality feature phone and from a B&N Nook Simple Touch, in addition to the one that came with it. I've also used a variety of car chargers.
Sent from my DROID4 using XDA
Actually, so far I have only one charger that had any trouble charging the phone (it was a $3 charger with 2 USB ports), but the $3 charger with ONE USB port works fine, as does the Nook Color charger, Blackberry charger, and Samsung charger I have tried it with, as well as both my old car charger and Lenovo's always-on charging port on their laptops.
JKingDev said:
So this is my first motorola and I had heard of the issues they have with non motorola chargers. Now I am experiencing it first hand. With the same ac charger I have charged many phones with and is capable of 1 amp output (D4 charger is only rated at 850 mA) my D4 struggles. With the device off it charged painfully slowly. While on it cannot even charge. It discharges while plugged in despite the charging indicator and reporting "charging (AC)" in status.
How does it know it is not a moto charger? Is it just about the resistance between the data pins? For most other phones shorting the data pins on the charger indicates to the phone that it is a high current charger and not a computer USB port. Is there a similar trick for motorola phones? I would rather not have to purchase an overpriced moto oem car charger. I have a perfectly fine 1.2 amp car charger soldered directly into my car's 12v system behind the dash. Can I make it work?
Thanks!
Click to expand...
Click to collapse
Not sure how it knows one way or the other. I've successfully used a few LG chargers to charge my D4. The only really hickup I've ran into is the usb cables from those lg chargers won't sync data to the phones when plugged into a computer, they'll still charge off the usb port but won't read as a usb connection to the computer.
Heh, captcha is trynply.
Every charger I've used, including an old charger for an EN-V, kindle, supplied, and various other phone chargers works just fine with this phone. Probably have a bad charger, guy.
Thanks for the replies. I guess I was wrong. My modded car charger works just fine. I guess its just time to retire the old charger that I have been using. I think it might be my old nexus one charger.
A more important question would be does the thing charge over computer-bound USB ports?
When you're without a charger, but there's a USB cable that fits your phone, sometimes a regular USB data port is the only that is around... even though it might take a really long time.
Try a computer bound USB port, then try your actual charger, again. Or do the hard reset (vol down plus power, hold until it actually does it), which is just like pulling the battery.
See how that goes.
Chris
RueTheDayTrebek said:
A more important question would be does the thing charge over computer-bound USB ports?
When you're without a charger, but there's a USB cable that fits your phone, sometimes a regular USB data port is the only that is around... even though it might take a really long time.
Try a computer bound USB port, then try your actual charger, again. Or do the hard reset (vol down plus power, hold until it actually does it), which is just like pulling the battery.
See how that goes.
Chris
Click to expand...
Click to collapse
It does in fact charge via USB port. In fact, it has a 'charge only' mode. Depending on how much juice your port puts out, and what you are doing with the phone, it will charge slowly/not at all, though.
from my experiences, the droid 4 will not accept lg microusb cables, the charging bricks work tho. i use a blackberry microusb on mine along with a Logitech and the stock moto ones. 1.2 amps is a bit high but not crazy sounding. personally, I charge at 1 amp.
i have noticed that the droid bionic, i don't know if it is just mine but i have notice that it is sensitive when i comes to chargers. like i have this charger that runs on 4 aa batteries and it goes to a plugin usb tip and it charges the usb device, when i use this charger it does seem to notice it at all and it does charge my phone. also i just built this car charger out of pieces and it works but once again my phone does not notice it. can it be forced to notice it or something like that through an app. can some one help me out tell me what is up im running my phone on stock rom and its rooted.
Have you checked the power output on the charger that you made? The output voltage may be out of spec and the phone is refusing it. Stock Motorola chargers output 5.1v at 850mA. Bionics are a bit power-hungry so if you're not putting out at least that much juice you're going to have a problem.
There's not going to be an app that can change something that's a hardware-related function. Either the pins are receiving power or they're not.
well the charger i made has 4 ports two female normal usb and the other is a micro plug and a mini plug i check the power on the female plugs and they are doing 5.3 i think and i have no way to check the micro and the mini but i would think that would be the same and the charger that is on batteries is 6.? v.
slave13 said:
i have noticed that the droid bionic, i don't know if it is just mine but i have notice that it is sensitive when i comes to chargers. like i have this charger that runs on 4 aa batteries and it goes to a plugin usb tip and it charges the usb device, when i use this charger it does seem to notice it at all and it does charge my phone. also i just built this car charger out of pieces and it works but once again my phone does not notice it. can it be forced to notice it or something like that through an app. can some one help me out tell me what is up im running my phone on stock rom and its rooted.
Click to expand...
Click to collapse
Well it appears the problem is not with your phone, but with your chargers. I suggest you get some sort of capacitor that will allow the power to build up to what the phone requires in order to charge. At least it should work in theory. Never did do the greatest in that class.
About a month ago my Note 4 stopped charging properly. I thought the battery was just getting on in age but with some troubleshooting I've noticed some symptoms-
#1- No longer shows up as Fast Charger plugged in. Whether it is Quick Charger, Regular 1A Charger, USB cable to Car Charger- it always shows up as USB Charging. This takes about 8 hours for a full charge.
#2 - Phone no longer connects to computer via USB .
#3 - Today I attempted to put a Wireless Qi Charger in, and while I was able to get some charging on a friends note. My Note seemingly is unaffected, even though the Qi Charging comes from the back plates- NOT from the USB port.
I'm guessing my 'charging unit' is damaged. Though I'm willing to hear out any suggestions.
Can anyone think of any components that would make this so?
Right now an external battery charger seems the only reasonable fix.
Hi everyone
I bought myself two Samsung wireless chargers (double pack) and tried them with the original Samsung S6 edge quick charger, with my old Sgs2 charger cable and with a cheap no name charger cable.
With all setups I have the same problem: almost every night at some point the qi charger starts blinking an stops charging. Both of them do. I do not know if it has anything to do with receiving messages or high cpu loads (when syncing/backup apps kick in at night) but this is really annoying.
I am not using any case or anything. Pure S6 edge. Right side up.
Does anybody have any idea? I mean, shouldn't it work properly?
Mine does that too with my Note 5. When I take it off it keeps blinking blue until I disconnect the cable. Seems like those chargers are not that good.
The only way I can Wireless Charge mine is using the Fast Charger that came with it. Using any other charger in the QI charger does not seem to work.
I have the same problem, i'm using the wall charger and cable that came with my phone, same problem at some random point the wireless charger starts blinking and stops charging, i think the problem its in the cable cause i move the cable around a bit and starts charging again, the weird part it's that this does not happens when i charge the phone directly from the cable.
will be sending mine back. really poor product. unusual for samsung
no idea how this made number one qi charger on amazon. completely unreliable
I bought a qi charger from ebay and i had the same problem with you, while was charging was disconnected. Finally i use my s6 edge stock charger and cable i connected it with the chinese charger and all perfect.. I send message to ebay seller with this problem and his gave me back partial refund...
I'm solved that issue with a blackberry cable.
Using standard plug and cable for my qi charger and when I put my s6 edge on have no problems at all strange how some do and some don't get it
tried cheap chinese cable, tried original samsung slow charging cable and tried the original fast charging cable that came with the s6 edge. all showed the same behaviour. i bought the double pack so got two qi chargers and both behaved the same.
maybe it is a software thing?
whatever it is, it renders the wireless charging capability useless
officiallyme said:
tried cheap chinese cable, tried original samsung slow charging cable and tried the original fast charging cable that came with the s6 edge. all showed the same behaviour. i bought the double pack so got two qi chargers and both behaved the same.
maybe it is a software thing?
whatever it is, it renders the wireless charging capability useless
Click to expand...
Click to collapse
Try to find another phone to test on your qi chargers.. if the same problems just forget that wireless charging excists.. if not sell it and buy another one..
currently trying the choetech and so far it works flawlessly. i wonder why samsung messed up their chargers so badly
officiallyme said:
Hi everyone
I bought myself two Samsung wireless chargers (double pack) and tried them with the original Samsung S6 edge quick charger, with my old Sgs2 charger cable and with a cheap no name charger cable.
With all setups I have the same problem: almost every night at some point the qi charger starts blinking an stops charging. Both of them do. I do not know if it has anything to do with receiving messages or high cpu loads (when syncing/backup apps kick in at night) but this is really annoying.
I am not using any case or anything. Pure S6 edge. Right side up.
Does anybody have any idea? I mean, shouldn't it work properly?
Click to expand...
Click to collapse
Yea mine did that to so I purchased DreamQi Wireless Charging Dual Alarm Clock w/ Bluetooth by VoltNow and just let it charge overnight with no problems. Its not fast charging but my S6 edge charges from 0 to 100 in about 1.5 hours with no charging issues when I have a notification or its fully charged.
wireless charger
I tried the Samsung flat round wireless, didn't work most of the time, exchanged it for the Tylt slanted upright, works flawlessly every time.