Database Develop

Vehicle chargers won't work...

Okay, I'm stumped. I'm already getting a replacement device from HTC under warranty so my problem is solved, but like many of you, I HATE NOT HAVING AN EXPLANATION FOR THINGS!
I'm also wondering if anyone else has had this problem? About 10-Days ago my Kaiser (Tilt) stopped charging via the automotive charger. The A-C charger works fine, but the vehicle charger sent to me with my device from AT&T completely stopped charging my device. I went to the AT&T store & bought a new charger, It didn't work. I changed power points, & cigarette lighter in the vehicle &, it wouldn't work. I tried the charger in the vehicle of two different AT&T sales guys & also tried multiple chargers, & it wouldn't work. Is there any reason why the unit would lose it's ability to charge via a vehicle charger while still retaining it's ability to charge through USB to computer & through the A/C home charger? It seems to me that if the charge portion of the MB was fried, then all charging would be affected.
So how can my device charge fine through all means EXCEPT the vehicle charger?
Again, AT&T is sending me a new device, but I hate not having an explanation for the problem, drives me Nucking Futs!!!
Any ideas, anyone?
Thx!

I dont want to sound rude but have you checked your power settings?
Under the "Advanced" it has a option for "When device is turned on, do not charge the battery when connected to the PC."
If this is ticked it will not charge via the in car charger.

It's a known issue, not just with the Tilt
I had the same problem with my Axim X50 and X51v.
The original sync/charge cable wouldn't charge from the car's lighter, while non-branded cables did so without any problems at all.
This happened with other Axims as well, so I know that it wasn't a defective unit.
I then purchased an HP Ipaq HW6910, and encountered the same issue with my wife's Mazda 5 - the HW6910 woudn't charge if the cable was connected to the charger, when I started the car. It only worked if the adapter and cable were disconnected while staring the car. This did not happen with my Mazda 3 or my Mitsubishi.
And another thing I discovered, is that some cables are not designed for use with car chargers, but they work perfectly with AC chargers.
I bought a couple of retracting sync/charge cables for my HW6910, they worked only when connected to the mains. But regular cables worked perfectly with both power sources.

Jygar said:
I dont want to sound rude but have you checked your power settings?
Under the "Advanced" it has a option for "When device is turned on, do not charge the battery when connected to the PC."
If this is ticked it will not charge via the in car charger.
Click to expand...
Click to collapse
OF COURSE I DID.
Yeah, It charges fine from the PC, & from an A/C source. But the HTC TYTNII car charger that came with my device, as well as replacement car chargers don't work.
wisniak said:
I had the same problem with my Axim X50 and X51v.
The original sync/charge cable wouldn't charge from the car's lighter, while non-branded cables did so without any problems at all.
This happened with other Axims as well, so I know that it wasn't a defective unit.
I then purchased an HP Ipaq HW6910, and encountered the same issue with my wife's Mazda 5 - the HW6910 woudn't charge if the cable was connected to the charger, when I started the car. It only worked if the adapter and cable were disconnected while staring the car. This did not happen with my Mazda 3 or my Mitsubishi.
And another thing I discovered, is that some cables are not designed for use with car chargers, but they work perfectly with AC chargers.
I bought a couple of retracting sync/charge cables for my HW6910, they worked only when connected to the mains. But regular cables worked perfectly with both power sources.
Click to expand...
Click to collapse
Funny, I just ran out to the truck & grabbed one of the guys Blackberry chargers & it looked like it was working. But SK Tools reports an even bigger (negative) amp draw (like discharging twice the normal rate). So with the BB charger it dischages even faster. Maybe reversed polarity Guess I should've checked first. That's a moot point now though as I await my new unit. Weird though.

Well i was using a BB charger that worked fine up until this morning. i bought my phone when it first came out so it wasnt easy to find a charger made for it at the time. i never had a problem until today. i also noticed that the Usb terminal on my device was bent. i called htc but they charge way too much to fix it. i have no idea how or when the terminal broke but it does still charge when pluged into pc or into the wall. ill have to spend $80 to have ppctechs fix it.

wassup, i`m in SF Cali, I had a att 8525 that was doing the same thing. I assumed it was the phone when it 1st started happening. After a week or so it was bothering me so i started playing with it trying to figure out if it was a setting, bad flash, or hardware. I noticed that if the phone was off it wood charge but not if it was on. I started flashing my phone and testing (for trouble shooting purposes) and for the first 2 or 3 roms problem still existed, then one of the roms i flashed to would turn on the back light as if it was charging but no LED or charge, when this started happening I realized that if i turned my fone off it wood start charging and continue to charge when i booted the fone back up. So if when i got in the car i pluged in/ shutdown/ waited like 45 sec or 1 min. / then booted it would temp. fix the problem for as long as my fone was on the cable. At some point after that many weeks/roms later i noticed it was working correctly again, So I had decided it was a glitch in the rom, But i`m not a Dev. or fone guru so I really dont know what it was, but hope this helps someone.... PEACE!! ~bboyphrog1~beatz`n pieces krooh~

flexte said:
Well i was using a BB charger that worked fine up until this morning. i bought my phone when it first came out so it wasnt easy to find a charger made for it at the time. i never had a problem until today. i also noticed that the Usb terminal on my device was bent. i called htc but they charge way too much to fix it. i have no idea how or when the terminal broke but it does still charge when pluged into pc or into the wall. ill have to spend $80 to have ppctechs fix it.
Click to expand...
Click to collapse
The slight diagonal slant on the bottom right? It's supposed to be like that. All AT&T Tilts (and I'd assume TyTN II's, but I've never had one to compare) have a mini-usb port that looks that way.

i looked at a 8525 and the usb terminal was straight. i even took a pencil and straightened mine out. it should be bent. that wouldn't make sense because the charges slot is not bent. i think the problem is that one side of the terminal is not soldered to the board and can easily be broken. in another thread 3 people have the same issue. as far as the car charger goes ill do some testing but until today it was charging fine while the phone was on.

this issue is known ,it even happens with the htc tynt.... by simlpy rebooting while in the charger it starts working again ..at least with mine.

I've had the same problem. I went to the lcoal AT&T store and they said they never heard of it so I thought it was just me. It looks like many of you have the issue. I wish I knew what it was. It was really bad with my 8525,

i thought Faria developed a cab to fix this issue in the hermes forum? might be worth having a search for it and when i get home i will see if i have a copy on my pc.

any of you guys get anywhere with this? I have exactly the same problem. posted in a couple of other threads actually.
Not sure whether the usb port is damaged, but it's certainly is slightly "down" on the right hand side.
It charges perfectly on the mains and perfectly from usb, but not in the car.
I have used a normal car charger, spent £50 on a Carcomm powered mount and tried one of the separate chargers that you plug the standard mini usb cable into. Nothing works. This is driving me crazy (if you'll excuse the pun!) a the primary reason I bought the Kaiser, was for GPS.
Thanks

well i also just found out 2 of my minisync cables dont work anymore. 1 of them still charges the phone but neither of them sync the phone anymore. it still syncs fine through a normal usb cable.

I am using a moto Razr car charger and it works fine so far.

Okay, confirmed on my replacement Tilt: The USB port is arrow straight. Someone earlier mentioned it being lower on the right side & indeed my DEAD DEVICE was as such. Looks like a bad job of connecting the port to the device.
NOTE!!!!!!
It's a good idea to take a look at your charger before you plug it in to make sure the charger USB connector is not bent or mi-sshappened.

i have the same problem i went through 4 att car chargers adn 5 phones. They are crap. Its not the phone its the charger if you play with it you will see that it comes and goes. The end tip on the charger is bad doesnt make a good connection. i have yet to find a good car charger.

Mine stopped charging using the car charger supplied and a brodit. A friend's kaiser charges OK with the same chargers.
No-one has mentioned it in this thread, but my phone, shows "charging" in the battery control panel and the LED lights up to confirm this. The percentage charge value decreases as though it isn't being charged!
As others have done I noticed that the corner of the plastic centre of the connector nearest the reset hole was slightly bent and I assume (though can't remember doing so) that I missed the reset hole with the stylus tip and pushed it in. Menu driven resets for me from now on!
HTC Europe didn't know anything about this fault, so seem to be happy to repair / replace it under warranty. It's with them at the moment, so I'll have to wait and see.
RSVRover

faria said:
this issue is known ,it even happens with the htc tynt.... by simlpy rebooting while in the charger it starts working again ..at least with mine.
Click to expand...
Click to collapse
that didnt work for me. only one of my chargers work now.

RSVRover said:
Mine stopped charging using the car charger supplied and a brodit. A friend's kaiser charges OK with the same chargers.
No-one has mentioned it in this thread, but my phone, shows "charging" in the battery control panel and the LED lights up to confirm this. The percentage charge value decreases as though it isn't being charged!
As others have done I noticed that the corner of the plastic centre of the connector nearest the reset hole was slightly bent and I assume (though can't remember doing so) that I missed the reset hole with the stylus tip and pushed it in. Menu driven resets for me from now on!
HTC Europe didn't know anything about this fault, so seem to be happy to repair / replace it under warranty. It's with them at the moment, so I'll have to wait and see.
RSVRover
Click to expand...
Click to collapse
Please let me know the outcome. mine is getting worse by the day.

Now I'm confused.
Because the device charges over USB I just assumed it would draw <500mA (the max output of a USB port) but the specs say it draws up to one amp.
Having owned a high-drawing device before (Axim x50v) I know that trying to pull this out of a USB port can blow your motherboard. So are these safe to charge over USB??? How does the device know whether its being charged over USB or mains - are there different charging pins on the connector?

Car Charging Problem?

Anyone else having trouble with their car charger not charging their at&t tilt? I have 2 aftermarket car chargers from cellphoneshop.com and having problems. Im using DCS wm6.1 v1.5 rom and radio 1.64.06.04. I plug the charger in, the red light on the charge goes on, the orange light on the phone goes on, the battery status from quickmenu in the top right corner blinks on/off, the phone says its charging, but the phone isnt charging. The battery is going down like it normally would while all this is going on. Ive tried 2 different car chargers on 2 different vehicles and still the same problem. I dont believe its the car chargers since the 1st one i used is the one ive been using for the past 3 weeks now with no problems and the second car charger i tried is the same as the first but brand new out of the box both with the same problem. I just flashed to this rom today and this is the first time trying to charge my phone with this rom via car charger so maybe its just the rom? Im stuck at work til 11 so i cant test it on my usb or home charger til then. Any ideas or do u guys think its just the rom? Thanks! Ive never had this problem with duttys 2 newest roms, just this one i flashed back to today.

Sometimes the orange charging light on the phone will flash on/off super fast! Also sometimes the orange light will disappear and while its off the phone will still lie to me and say its charging.

is there anything running on the phone when you plugged it in? my phone wont charge after i've been using 3g for some time and it heats up. also is there any other device you can test the charger with?

XtreMe_G said:
is there anything running on the phone when you plugged it in? my phone wont charge after i've been using 3g for some time and it heats up. also is there any other device you can test the charger with?
Click to expand...
Click to collapse
Yes, i have java, hotmail, and palm messaging on in the background but having programs on in the background never made a difference before nor did being in 3g coverage which is what im in 95 percent of the day living in southern california. No other phones to try the chargers on. Ill try turning the phone off for a bit and charge it and see what happens. That would determine if the coverage or backgrounds apps are stunting the charge.

Im convinced its the rom now. When the phone is powered off the orange light is there showing its charging then after a few minutes disappears. I then unplug the charger and plug it back in but this time instead of an orange light theres a red light that stays on! I then unplug the charger and the second i unplug it the red light goes away and the phone turns on by itself. I dont think a simple car charger can do all that to a phone. I really liked this rom too. Oh well, just gotta charge my phone when i get home on the home charger if that works and reflash back to duttys march 08 rom.

Anyone else have similar car charging problems?

SOLUTION
It's not the ROM, it's the charger. Generic chargers are not wired the same as HTC chargers. HTC shorts pins 4-5 on the mini-USB end of the cable signaling the phone to enter into charge mode. Normal mini-usb chargers don't and so it's intermittent. If you purchase an HTC charger OR modify a cable the problem will be solved.
If you have other HTC phones, you'll see similar issues, especially when the battery is <10%.
The phenomenon is pretty well documented elsewhere on this site.
Regards,

liquidsilver said:
It's not the ROM, it's the charger. Generic chargers are not wired the same as HTC chargers. HTC shorts pins 4-5 on the mini-USB end of the cable signaling the phone to enter into charge mode. Normal mini-usb chargers don't and so it's intermittent. If you purchase an HTC charger OR modify a cable the problem will be solved.
If you have other HTC phones, you'll see similar issues, especially when the battery is <10%.
The phenomenon is pretty well documented elsewhere on this site.
Regards,
Click to expand...
Click to collapse
Huh, you could be right because the stock home charger that comes with the phone works perfect charging. So do i have to buy a ridiculus $40 car charger then from at&t? Guess its too good to be true when the generic is only 4 bucks.

i use my car charger all the time when i am driving and i dont expereince any of these problems... aside from the fact that it chrages slower then the AC charger but its understandable...

liquidsilver said:
It's not the ROM, it's the charger. Generic chargers are not wired the same as HTC chargers. HTC shorts pins 4-5 on the mini-USB end of the cable signaling the phone to enter into charge mode. Normal mini-usb chargers don't and so it's intermittent. If you purchase an HTC charger OR modify a cable the problem will be solved.
If you have other HTC phones, you'll see similar issues, especially when the battery is <10%.
The phenomenon is pretty well documented elsewhere on this site.
Regards,
Click to expand...
Click to collapse
Ive never had problems though with these generic charges with other roms and yes i've charged my phone from 0 to 100 percent on the generic car charger i have before. This is the first time ive charged my phone with this rom and with the car charger so thats why i would say its the rom since it has charged many other roms perfectly. Do you know of a good place to buy an htc offical car charger? The best i've seen on the web so far is 25 bucks.

I'm going to get one of the USB car chargers.

Even the chargers ATT sells can fail. They are just repackaged junk for the most part with low current ratings.
$25 is pretty good for an HTC charger. Highly recommended to go this route.
Those who have success with the generics are just lucky as the chargers don't meet specs. The odds are good that it will let you down someday.
As I mentioned above, there's a lot of info on this topic already posted elsewhere on the forum.

Got an official HTC Charger (in at&t packaging even) from eBay seller "NakedCellPhone" for $10 + about $5 shipping.
They're marked as for the Cingular 2125 & a few other older models but it works perfectly.

DOES THE HOME CHARGER (ac) WORK???
If so, it DOES & only USB to PC or Automotive charging is affected, you've most likely damaged your USB port pins while trying to soft reset.
Take a look at the USB port on the device. If it is curved or lower on the righ side, congratulations, you are both the Perp & the victim. The USB port was poorly placed by HTC, & the stylus was poorly placed by you.
Sometimes it can be (very gently & at your own risk) bent back into shape depending on which one of the two usb port versions your device has.
BTW, if you have a business account they are only $15.00

Not all chargers are the same.
The stock OEM charger has a rating of 1A. Most car chargers that I have seen have 500mA to 800mA rating. In most cases, with these lower current chargers, you won't notice a difference except for possible longer charging time. Though, if your battery is really low, <20% or so, your car charger may not work.
I have experienced this phenomenon not only on HTC devices like the 8925 and the 8125, but also the Siemens SX66 as well.
As a side note, I've read somewhere that charging using a USB cable to your computer allows for 500mA, UNLESS the PDA is syncing through ActiveSync when the PDA asks permission to draw 1A of power. If I remember correctly, the OEM charger shorts a couple of pins to simulate this situation, but of course, the power converter/inverter is also rated at the higher current as well.
I'm not sure shorting the pin on a lesser rated charger is going to have much effect, except possibly breaking your device or cable.
Cardyin

I just don't understand how the generic can charge my phone everyday for almost 3 weeks now then all of a sudden stop and acting so weird, see posts 2 and 3. Then i try my second generic car charger right out of the box and does the same thing. Yes, my phone charges perfectly through the usb on the computer and the home charger it came with so i dont think its the port on the phone thats messed up. Guess ill have to invest in an official htc car charger and see how it goes.

GSLEON3 said:
DOES THE HOME CHARGER (ac) WORK???
If so, it DOES & only USB to PC or Automotive charging is affected, you've most likely damaged your USB port pins while trying to soft reset.
Take a look at the USB port on the device. If it is curved or lower on the righ side, congratulations, you are both the Perp & the victim. The USB port was poorly placed by HTC, & the stylus was poorly placed by you.
Sometimes it can be (very gently & at your own risk) bent back into shape depending on which one of the two usb port versions your device has.
BTW, if you have a business account they are only $15.00
Click to expand...
Click to collapse
The 2 last pins on the right side are down just a notch from the rest of the port but its pretty much always been like that, even when the car charger was working. Only having problem with the car charger, computer and ac charging works fine. I'll try to move the pins up and align them but its so minor how much they are down.

cardyin said:
Not all chargers are the same.
The stock OEM charger has a rating of 1A. Most car chargers that I have seen have 500mA to 800mA rating. In most cases, with these lower current chargers, you won't notice a difference except for possible longer charging time. Though, if your battery is really low, <20% or so, your car charger may not work.
I have experienced this phenomenon not only on HTC devices like the 8925 and the 8125, but also the Siemens SX66 as well.
As a side note, I've read somewhere that charging using a USB cable to your computer allows for 500mA, UNLESS the PDA is syncing through ActiveSync when the PDA asks permission to draw 1A of power. If I remember correctly, the OEM charger shorts a couple of pins to simulate this situation, but of course, the power converter/inverter is also rated at the higher current as well.
I'm not sure shorting the pin on a lesser rated charger is going to have much effect, except possibly breaking your device or cable.
Cardyin
Click to expand...
Click to collapse
You guys think this charger is worth a shot or just pay the extra 20 bucks for the official? http://www.semsons.com/hipocarchwim.html It says its power output it 850mA!

Here is the cheapest original htc car charger i could find, www.talkietech.com/htcvecarpoch.html Heres some specs, OEM HTC Car Charger (81551) Features:
HTC Cell Phone Vehicle Charger allows phone to be charged on the road
Original Genuine HTC car charger guarantees maximum durability and performance
High quality aluminum brushed LED indicator light
Part# 81551
Compatible with:
HTC Cingular 8525, Cingular 8125, HTC Cingular 2125
HTC T-Mobile Dash, T-Mobile Wing, T-Mobile MDA and T-Mobile SDA
HTC T-Mobile Shadow, HTC Touch, Sprint Touch
It doesn't say though it works with the 8925 or tilt, would it still work on my at&t tilt? I think it would since my tilt's home charger charges my 8525 fine. What do you guys think?

deeznuts said:
The 2 last pins on the right side are down just a notch from the rest of the port but its pretty much always been like that, even when the car charger was working. Only having problem with the car charger, computer and ac charging works fine. I'll try to move the pins up and align them but its so minor how much they are down.
Click to expand...
Click to collapse
I can garuntee they didn't come "down just a notch". There ar multiple threads about this issue. Sometimes it causes auto chargers to fail completely & somtimes it just causes a bad connection.
When the device was new, it was straight as an arrow. I know this because I have a TYTNII & a Tilt & this happened on the Tilt. I would drive into the local store & tell them you are having charge issues. They'll let you test out one of the stock chargers, & if that doesn't work, then it's a connection issue because of the mis-shappened port. The pins in the USB port are pretty small. It does NOT take much deviation for them to lose good contact. It also happens more frequently on the devices that have the open ended pin block.

Weird battery/moto charger issue

I bought a used nexus 6. It's in good shape. I immediately installed twrp and flashed cataclysm (my fav). This was all done on day one. I began using the device as normal. Upon plugging the device in to the charger (moto quick charger) I noticed it was charging VERY slowly. I checked the battery usage menu in settings and noticed that it said "charging over USB.". I was plugged into the wall. So, I thought, alright the guy sold it to me with a borked charger. I tried my old note 5 quick charger and it seems to work fine. Then, just for additional trouble shooting, I tried using the moto charger on my wife's lg g3. It worked fine. Seems the issue only happens on the nexus 6 with the moto quick charger. I searched with Google and found:
https://m.reddit.com/r/nexus6/comme...is_charging_slowly_says_it_is/?ref=readnext_3
Anyone know anything about this, or knows of a fix? I can use my note 5 charger, but my obsessive and anal tech ways keep me from just letting it go.
Thanks in advance!

I'm having a similar issue with two different chargers:
The Included Charger (the one that comes with the phone)
and
Aukey 12W / 2.4A Home Travel USB Wall Charger Adapter
http://www.amazon.com/gp/product/B00Q873I3K?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s01
+
Monoprice 6-Feet USB 2.0 A Male to Micro 5pin Male
http://www.amazon.com/gp/product/B003L18S0E?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
In my case, what happens is that the phone intermittently start and stops charging while plugged in. Not sure if it actually slows down the charge process though...

Fast Wireless Charging pad stopped working

All of sudden my Samsung Fast Wireless Charging pad is not working at all for my S7 Edge? I've tried 2 OEM cables, and nothing. A different cable, and still nothing. Could it be a software problem? Could there have been any apps I might've disabled that allowed the fast charger to work? All the fast charging options are set to ON in settings, but nothing is working. No lights, nothing? Need help thanx.

spritzo said:
All of sudden my Samsung Fast Wireless Charging pad is not working at all for my S7 Edge? I've tried 2 OEM cables, and nothing. A different cable, and still nothing. Could it be a software problem? Could there have been any apps I might've disabled that allowed the fast charger to work? All the fast charging options are set to ON in settings, but nothing is working. No lights, nothing? Need help thanx.
Click to expand...
Click to collapse
I know it sounds like the obvious, but did you try a different adopter . I am having no issues and have the latest updates

yes I have tried 3 different adapters. 2 fast charging and 1 regular.

Do you have any other device that is capable of wireless charging? It doesn't have to be fast charge capable but that's where i would start to see if its the phone or the actual charger.
If not then go somewhere that has wireless chargers out, like best buy or your carrier and set your phone on it to see if it starts charging. If it doesn't start charging then it might be your phone.
Its most likely the wireless charger that having the issue though, and you can contact Samsung support on twitter @samungSupport and they should be able to help you out.

So I tried Samsung's twitter support. And apparently the Galaxy S7 Edge (SM-G935) isn't compatible with that fast charging pad. Although it worked for a couple weeks. So weird.

I just exchanged my note 7 for S7 edge and looking into buying this fast wireless charging pad https://www.amazon.co.uk/gp/product...act_title_1?ie=UTF8&psc=1&smid=A3P5ROKL5A1OLE, it's not this one that stopped working or is it?

Hey, do the downgrade to PE1 with full wip, and put 100%, your working fast charging. Good luck. To me it helped.

Is there another phone you can try on your charging pad, or another pad you can try? The most likely answer is that the charging pad has failed.

Samsung Wireless Qi Fast Charger
I really like to purchase the Samsung Fast Qi fast wireless charger
but I have a few questions about it before I buy one.
#1: How much slower is the fast wireless Qi charger when compared to
the samsung fast usb charger which comes with the phone?
#2: Does the phone get hot or very warm when it's charging wirelessly?
#3: Does the phone charge slower when it has a case on it?
Thanks in advance,
Have a great day!

Wireless charger problem

https://www.amazon.co.uk/gp/product/B01N0XZDMD/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I have this charger but on the note 8 (ok on S8+) it keeps giving me a bleep and the message "wireless charging enabled" pops up on screen every few minutes. The green charge light remains lit. Any ideas what is going on?
I've tried it vertically and horizontally and same effect.
thanks

bonerp said:
https://www.amazon.co.uk/gp/product/B01N0XZDMD/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I have this charger but on the note 8 (ok on S8+) it keeps giving me a bleep and the message "wireless charging enabled" pops up on screen every few minutes. The green charge light remains lit. Any ideas what is going on?
I've tried it vertically and horizontally and same effect.
thanks
Click to expand...
Click to collapse
I have one similar to that (amazon chinese one) and it will not fast charge on my note 8 but it will slow charge wirelessly but it doesn't oscillate and stop charging like you are describing. Works fine fast charging my note 5. Hard telling about some of those chinese wireless chargers. Are you using a samsung or equivalent qc 2.0 adapter? If so and it is still oscillating on and off it is a connection issue between the coils or some other quirk with the charger. Do you have another wireless charger that you can test with?

iowamoe300 said:
I have one similar to that (amazon chinese one) and it will not fast charge on my note 8 but it will slow charge wirelessly but it doesn't oscillate and stop charging like you are describing. Works fine fast charging my note 5. Hard telling about some of those chinese wireless chargers. Are you using a samsung or equivalent qc 2.0 adapter? If so and it is still oscillating on and off it is a connection issue between the coils or some other quirk with the charger. Do you have another wireless charger that you can test with?
Click to expand...
Click to collapse
Hi Yes using the samsung charger. Its weird as the green light remains on suggesting its still charging but I get the bleep and message. I might bin it and buy a chotech one as it seems to have good reviews.
thanks

Hmm I'm not sure where the problem lies - I now have a choetech and a replacement for the other one I reported above. However the problem continues...
When the phone is fully charged it pops up on screen saying its 100% charged....then it seems to switch back to charging mode and again pops up saying its 100% charged shortly after.
This appears to be a constant cycle and rather than just keep it topped up in the background it tells me so...during the night this is a major distraction as the screen lights up each time.
It doesn't do it via the USB cable.
Anyway to disable the notification? Its not an app so can't find the permissions.
thanks