Database Develop

HUAWEI P7-L10C02B817 Android 5_EMUI3.1 Vodacom relesed

NEW Full ROM
Date: 2015-9-17 Version: P7-L10C02B817 Android 5_EMUI3.1 Vodacom File Size: 1.15 GB
Link download:http://consumer.huawei.com/za/support/downloads/detail/index.htm?id=52987​

Lindo gracias bro ???????

Is it a beta ? Or Final ?

Ok
Don't have error of the 815.... And I probe the battery in this moment.. tell later !

I flashed Stock B609 CWM then used the dload UPDATE.APP method to flash this update
I use Vodacom and I am from South Africa
Dont know if that helps, but it went successfully for me!!
Hope it works for you!!!

danielproenca said:
I flashed Stock B609 CWM then used the dload UPDATE.APP method to flash this update
I use Vodacom and I am from South Africa
Dont know if that helps, but it went successfully for me!!
Hope it works for you!!!
Click to expand...
Click to collapse
Hey there Daniel! I'm on the Vodacom network as well. Could you please tell me what your cust version is? Maybe you can take a screenshot? I don't see a cust version on mine.

rodlane said:
Hey there Daniel! I'm on the Vodacom network as well. Could you please tell me what your cust version is? Maybe you can take a screenshot? I don't see a cust version on mine.
Click to expand...
Click to collapse
On B817 my Custom Version is CUSTC02D710
Build: P7-L10C02B817

danielproenca said:
On B817 my Custom Version is CUSTC02D710
Build: P7-L10C02B817
Click to expand...
Click to collapse
Do you have VENDOR UPDATE.APP of CUSTC02 version?

majcomtech said:
Do you have VENDOR UPDATE.APP of CUSTC02 version?
Click to expand...
Click to collapse
There isn't a vendor.img or update.app. Does anyone have one of these for any lollipop version?

rodlane said:
There isn't a vendor.img or update.app. Does anyone have one of these for any lollipop version?
Click to expand...
Click to collapse
Some released firmware has UPDATE.APP for vendor. In can be found in folder named "Part 2". Inside of it you can find the file with a capacity of 17.9 kb. Hoping that Vodacom released it somewhere.

majcomtech said:
Some released firmware has UPDATE.APP for vendor. In can be found in folder named "Part 2". Inside of it you can find the file with a capacity of 17.9 kb. Hoping that Vodacom released it somewhere.
Click to expand...
Click to collapse
The Turkish version of b619 has it. I tried using it before and it works on 3.0. I modified it to get onto cust 432. I tried it now again but it doesn't work for 3.1.

rodlane said:
The Turkish version of b619 has it. I tried using it before and it works on 3.0. I modified it to get onto cust 432. I tried it now again but it doesn't work for 3.1.
Click to expand...
Click to collapse
I know it has. But we need CUSTC02 to get this firmware B817 work for non Vodacom user. 432 or 433 and etc. wont make this firmware work normally except having CUSTC02. This firmware can be used by Vodacom user only normally without having CUST error during installation.

majcomtech said:
I know it has. But we need CUSTC02 to get this firmware B817 work for non Vodacom user. 432 or 433 and etc. wont make this firmware work normally except having CUSTC02. This firmware can be used by Vodacom user only normally without having CUST error during installation.
Click to expand...
Click to collapse
turkish vendor from B619
https://mega.nz/#!HUZ0SBbT!gSdOH9ge1h3MtT4ioTcsPyzH1ND2z4Uv0QzKDsHOFyc

haninatoon said:
turkish vendor from B619
https://mega.nz/#!HUZ0SBbT!gSdOH9ge1h3MtT4ioTcsPyzH1ND2z4Uv0QzKDsHOFyc
Click to expand...
Click to collapse
Boot loop on 619. It will locked bootloader.

majcomtech said:
Boot loop on 619. It will locked bootloader.
Click to expand...
Click to collapse
how come , it is original vendor , I tested it before
I am unlocked bootloader officially from huawei
Sent from my HUAWEI P7-L10 using XDA Free mobile app

haninatoon said:
how come , it is original vendor , I tested it before
I am unlocked bootloader officially from huawei
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
Anyway, no problem about bootloader locked. I kept my unlocked code. But, still not working on B817. Still we need CUSTC02.

It's not so much of an issue from what can see. I did a factory reset and restored all my apps and data to see what happens. Still the same except that I now have LTE. Still no cust. If you have a look at the cust folder for our network, you'll see that there are masses of applications that will automatically install, all of which I am not partularly interested in. All I am interested in is the fact that everything runs and runs more smoothly than any other version I have used before, and there are no visible bugs so far

rodlane said:
It's not so much of an issue from what can see. I did a factory reset and restored all my apps and data to see what happens. Still the same except that I now have LTE. Still no cust. If you have a look at the cust folder for our network, you'll see that there are masses of applications that will automatically install, all of which I am not partularly interested in. All I am interested in is the fact that everything runs and runs more smoothly than any other version I have used before, and there are no visible bugs so far
Click to expand...
Click to collapse
I totally agree with @rodlane .... this build is almost bug free .... only navigation bar hide option is not there .... and the battery is good .... i use 3g network all the time so it doesn't last long but no more mediaserver issues and no more heating ...... also with the built in lollipop battery saver function it is better then ever but huawei has hidden it dunno why but This app opens it :laugh::laugh:

Guys please help me I'm stuck on b800 after downgrading from b817, now I can't upgrade nor downgrade to kitkat..every rom file I flash it fails on 2%..I'm running stock firmware not rooted...

After several days finding ways how to successfully install B817 without CUST error, finally I made it. Now by playing the Vendor CUSTC version, I finally managed to change my vendor version to CUSTC02.

It seems there are updates bu I'm stuck on B170

Hello,
I have a PRA-LX1 C432 unbranded and the updater keep saying I have the latest official update B170.
Using HFF we can see B181, 183 and 191 for C432 model. But... making a system dump of these builds we can see that there is in build.prop "generic_15" as phone model...
So I didn't install anything...
- Are the builds from HFF trustables ??
- Is there a way to force the update?
thanks!

sambastrakan said:
Hello,
I have a PRA-LX1 C432 unbranded and the updater keep saying I have the latest official update B170.
Using HFF we can see B181, 183 and 191 for C432 model. But... making a system dump of these builds we can see that there is in build.prop "generic_15" as phone model...
So I didn't install anything...
- Are the builds from HFF trustables ??
- Is there a way to force the update?
thanks!
Click to expand...
Click to collapse
Same I'm on B115 and there is up to B191 but only B181 passes check from B115 so will try it but pretty sure it will fail I'm sure from having this phone before you have start B110 and work way up they seem to have disabled manual update like use to on 5X 6X *#*# method don't seem to work anymore but I'm gunnar try anyway
Sent from my PRA-LX1 using Tapatalk

Tried going back to B110 but fails and tried newer ones same just fail every time
Sent from my PRA-LX1 using Tapatalk

I have same problem.... Im still on B175, no new updates in updater.

Sparco21 said:
I have same problem.... Im still on B175, no new updates in updater.
Click to expand...
Click to collapse
I wonder if we will see 8.0, I think all the different build numbers are region based I wonder if any of the p9 lite Roms would work as technically same device PRA-LX1 isn't it
Sent from my PRA-LX1 using Tapatalk

I unlocked my bootloader last night and warns it will wipe, well after the wipe and reboot all system apps like play store browser keyboard were gone I could not do anything other than do a erecovery and that didn't work so had to do a hard factory reset its all working now again but no twrp recovery, weird as
Sent from my PRA-LX1 using Tapatalk

Huawei is a mess...
thnaks for answers !

I tried update to B191 from B115 via Twrp tried flash first file update.zip but just fails, is it cos I left zipped should I unpack it?
Sent from my PRA-LX1 using Tapatalk

I was able to update to B181 with Firmware Finder, but nothing more...

islandman75 said:
I was able to update to B181 with Firmware Finder, but nothing more...
Click to expand...
Click to collapse
But there are more than one build 181, do you know which one you installed ?
your device name continues to be PRA-LX1 or moved to "generic_15" ?
Anything consistent in this update ?
thanks

sambastrakan said:
But there are more than one build 181, do you know which one you installed ?
your device name continues to be PRA-LX1 or moved to "generic_15" ?
Anything consistent in this update ?
thanks
Click to expand...
Click to collapse
Installed the FULL-OTA 181, and after that name didn't change to generic, stayed PRA-LX1... B181

islandman75 said:
Installed the FULL-OTA 181, and after that name didn't change to generic, stayed PRA-LX1... B181
Click to expand...
Click to collapse
Thanks
Problem is that HFF gives a list of something like 5 packages Full OTA for PRA-LX1C432...
Don´t know the diferences between packages ...

sambastrakan said:
Thanks
Problem is that HFF gives a list of something like 5 packages Full OTA for PRA-LX1C432...
Don´t know the diferences between packages ...
Click to expand...
Click to collapse
Yeah, forgot to say, the main difference was passing from EMUI 5.0 to EMUI 5.0.1

Any instructions how to flash with ff?

p9plus update to Emui 5.0 issue....

My p9plus is not getting any sort of update ...it is currently on Emui 4.1 and its build number is VIE-L09c627B160 can any one help me ?

Aadiisarki said:
My p9plus is not getting any sort of update ...it is currently on Emui 4.1 and its build number is VIE-L09c627B160 can any one help me ?
Click to expand...
Click to collapse
you can try using Firmware Finder Free. its available for download it from Play Store

Mine is stuck too not haven't received a single update since I bought it still on emui 4.1 FF is useless it donwloads the update just fine but it always fails on the installation at 1% my build N is VIE-L29C605B131.

Aadiisarki said:
My p9plus is not getting any sort of update ...it is currently on Emui 4.1 and its build number is VIE-L09c627B160 can any one help me ?
Click to expand...
Click to collapse
What country/region are you from?
What is the present firmware version B160 dated?
Firmware Finder (FF) (online version) shows B150 as the latest, so FF's probably not going to help you unfortunately: http://pro-teammt.ru/firmware-database/?firmware_model=VIE-L09c627&firmware_page=0
Your only other option may be to convert to another region's ROM, which has received regular updates - e.g. Euro C432 ROM (latest is B382, dated March 2018). But, it's a risky procedure which involves unlocking the bootloader, rooting the phone, changing the vendor country info with SRK Tool, etc, etc.
Coreinsp said:
Mine is stuck too not haven't received a single update since I bought it still on emui 4.1 FF is useless it donwloads the update just fine but it always fails on the installation at 1% my build N is VIE-L29C605B131.
Click to expand...
Click to collapse
Which update did you try? If you're still on 4.1, then you should try a much earlier update (i.e. the very 1st 5.0 update) - I'd recommend one of the B361s from here (or via the FF app): http://pro-teammt.ru/firmware-database/?firmware_model=VIE-L29C605&firmware_page=0
Always download & apply the FullOTA-MF, in this case ~1.3Gb file size.
Once you have installed B361 successfully, try the B381 update (not the latest B382 as it will not work at this stage most likely). Again, download the FullOTA-MF (1.4Gb) & apply it.

GaT7 said:
What country/region are you from?
What is the present firmware version B160 dated?
Firmware Finder (FF) (online version) shows B150 as the latest, so FF's probably not going to help you unfortunately: http://pro-teammt.ru/firmware-database/?firmware_model=VIE-L09c627&firmware_page=0
Your only other option may be to convert to another region's ROM, which has received regular updates - e.g. Euro C432 ROM (latest is B382, dated March 2018). But, it's a risky procedure which involves unlocking the bootloader, rooting the phone, changing the vendor country info with SRK Tool, etc, etc.
Which update did you try? If you're still on 4.1, then you should try a much earlier update (i.e. the very 1st 5.0 update) - I'd recommend one of the B361s from here (or via the FF app): http://pro-teammt.ru/firmware-database/?firmware_model=VIE-L29C605&firmware_page=0
Always download & apply the FullOTA-MF, in this case ~1.3Gb file size.
Once you have installed B361 successfully, try the B381 update (not the latest B382 as it will not work at this stage most likely). Again, download the FullOTA-MF (1.4Gb) & apply it.
Click to expand...
Click to collapse
I tried all of the full OTA on FF all them download just fine but every time the phone restarts to install the update for some reason it fails at 1% of the install.
Sent from my VIE-L29 using Tapatalk

try B202 first
I had an P9+ B130 version and was able to upgrade to B202, which is needed as a stepping stone to MIUI 5. I used FF with the proxy update scheme. The B202 update worked while other versions stopped at verifying the update, which is just what you experienced.
Coreinsp said:
I tried all of the full OTA on FF all them download just fine but every time the phone restarts to install the update for some reason it fails at 1% of the install.
Sent from my VIE-L29 using Tapatalk
Click to expand...
Click to collapse

cjviking said:
I had an P9+ B130 version and was able to upgrade to B202, which is needed as a stepping stone to MIUI 5. I used FF with the proxy update scheme. The B202 update worked while other versions stopped at verifying the update, which is just what you experienced.
Click to expand...
Click to collapse
I'm out of luck then it seems that the B354 update is no longer available on FF which is the "steppingstone" in my case.
Sent from my VIE-L29 using Tapatalk

Same problem here. I'm still on vie-l29c636b103. Any solutions?

Manual Update Pie?

It is possible to update the equipment with Android 9 with the signed firmware (Huawei Finder) and with the bootloader blocked, my device is a VTR-L29C605B374 and as I have seen in FF there is an update with Anddoid 9 for my IMEI, but my P10 is not in any update

try throu HiCare! and yes you can with eRecovery just follow steps!

the-bomber said:
try throu HiCare! and yes you can with eRecovery just follow steps!
Click to expand...
Click to collapse
From Hicare, my phone is in the last Update, but in FFinder there is one Update to Android Pie, what steps should I follow to update the P10 manually, that is, download the files from FF and update locally or some method that does not need the open bootloader?
My phone has C605B374 (last official Update)

no you don't need unlocked bootloader. go to firmware finder click on ur firmware and check if its approved then click on eRecovery method and follow instructions

You can try this method here to update using Hisuite on the PC, along with Firmware Finder on your phone: https://forum.xda-developers.com/showpost.php?p=78850439&postcount=1334
Be sure to upgrade to B386 version first, before attempting to go to Pie, for best chance of success and lowest risk.

the-bomber said:
try throu HiCare! and yes you can with eRecovery just follow steps!
Click to expand...
Click to collapse
Thanks, Hisuite and method host working, my phone was updated to Android 9 from C605B374

how did you update please help us. thank you

NowLearn said:
how did you update please help us. thank you
Click to expand...
Click to collapse
Instructions how to get an authorized version of EMUI 9 on EMUI 9 via Firmware Finder
Attention, this method requires more success checks.
1. Add a line to C:\Windows\System32\drivers\etc\hosts
188.225.84.142 query.hicloud.com
2. Download and install HiSuite9.0.2.304, BUT NOT RUN:
3. Replace the files:
httpcomponent.dll move with the replacement in C:/Program Files (x86)/HiSuite or other directory in which the application is installed HiSuite
HiSuiteConfig.xml move with the replacement in C:/Users/YOURUSERNAME/AppData/Local/Hisuite/userdata/UpdateDogDev
4. Open FF (any, I like the smartphone to register - less action)
Looking for a permitted Android 9 for your device on the principle: device_model: VTR-L29 or VTR-L09,
NOTE: Firmware must be approved for your IMEI
Once again, make sure it is permitted, registers the update for eRecovery.
NOTE: There are two types of firmware: CHN, i.e. for Chinese devices and OVS, for all the rest. So if you do not have Chinese firmware, then you need to pay attention exclusively to OVS.
5. Run HiSuite, connect the device, looking for an update, update, enjoy.
NOTE: Follow the link and download archives

Necrodaemon said:
Instructions how to get an authorized version of EMUI 9 on EMUI 9 via Firmware Finder
Attention, this method requires more success checks.
1. Add a line to C:\Windows\System32\drivers\etc\hosts
188.225.84.142 query.hicloud.com
2. Download and install HiSuite9.0.2.304, BUT NOT RUN:
3. Replace the files:
httpcomponent.dll move with the replacement in C:/Program Files (x86)/HiSuite or other directory in which the application is installed HiSuite
HiSuiteConfig.xml move with the replacement in C:/Users/YOURUSERNAME/AppData/Local/Hisuite/userdata/UpdateDogDev
4. Open FF (any, I like the smartphone to register - less action)
Looking for a permitted Android 9 for your device on the principle: device_model: VTR-L29 or VTR-L09,
NOTE: Firmware must be approved for your IMEI
Once again, make sure it is permitted, registers the update for eRecovery.
NOTE: There are two types of firmware: CHN, i.e. for Chinese devices and OVS, for all the rest. So if you do not have Chinese firmware, then you need to pay attention exclusively to OVS.
5. Run HiSuite, connect the device, looking for an update, update, enjoy.
NOTE: Follow the link and download archives
Click to expand...
Click to collapse
I tried. It said failed to connect. I have a vtr-l09 c025. What version do your recommend for Latin America? Thank you

the-bomber said:
no you don't need unlocked bootloader. go to firmware finder click on ur firmware and check if its approved then click on eRecovery method and follow instructions
Click to expand...
Click to collapse
I just want to say thank you! This basic instruction was the clearest I found on the whole internet. :good: I have a VTR-L29C185 Huawei P10 that I needed to get recovered as it was failing. This worked 100% for me to get stock firmware on it and going.
I do have another question - is there a legit stock 9.0 firmware for this phone?

RubAnADUB said:
I just want to say thank you! This basic instruction was the clearest I found on the whole internet. :good: I have a VTR-L29C185 Huawei P10 that I needed to get recovered as it was failing. This worked 100% for me to get stock firmware on it and going.
I do have another question - is there a legit stock 9.0 firmware for this phone?
Click to expand...
Click to collapse
Yes, you can check on firmwarefinder and before installing hit the Check firmware availability! if it says Yes available for your device you can install it without any problem! :highfive:
have a goodday!

I see an update on HiCare,i'm clicking the check box but it says try later...i have vtrl09 version...

the-bomber said:
Yes, you can check on firmwarefinder and before installing hit the Check firmware availability! if it says Yes available for your device you can install it without any problem! :highfive:
have a goodday!
Click to expand...
Click to collapse
I found one that said it was yes on verify, but when I hit register for erecovery it just started loading the dang 8.0 one instead....

the-bomber said:
Yes, you can check on firmwarefinder and before installing hit the Check firmware availability! if it says Yes available for your device you can install it without any problem! :highfive:
have a goodday!
Click to expand...
Click to collapse
hi, i follow the instruction, but when i connect to erecover, with HISUITE, it gives me the error. what am i doing wrong? i added the ip to host table,thank you

I need help with these files. I downloaded 2 files from the firmware finder. then extracted them. I know they are supposed to go to a dload folder but I am confused on how to combine them?
https://www.getdroidtips.com/full-guide-install-stock-firmware-huawei-smartphone/

RubAnADUB said:
I just want to say thank you! This basic instruction was the clearest I found on the whole internet. :good: I have a VTR-L29C185 Huawei P10 that I needed to get recovered as it was failing. This worked 100% for me to get stock firmware on it and going.
I do have another question - is there a legit stock 9.0 firmware for this phone?
Click to expand...
Click to collapse
VTR-L29C185E3R1P9B159 (9.0.1.159)
VTR-L09C185E3R1P9B159 (9.0.1.159)
Now you must verify if it is approved for your IMEI and install using Hisuite
PD: Search firmware in FF .... VTR-L29CXXX (XXX = CUST)

NowLearn said:
I tried. It said failed to connect. I have a vtr-l09 c025. What version do your recommend for Latin America? Thank you
Click to expand...
Click to collapse
Verify changes in host, drivers USB, HDB in Phone (install and approved connection), then Firmware approved for you IMEI

Necrodaemon said:
Verify changes in host, drivers USB, HDB in Phone (install and approved connection), then Firmware approved for you IMEI
Click to expand...
Click to collapse
Me puedes aayudar porvor? sale error FAILED TO UPDATE, lo hice tal cual lo publicaste. No me llego la actualizacion que prometio huawei xd debe ser solo para los operadores clavistel solamente xd.
gracias de antemano.

Service firmware Emui 9.1 PE C432 fig-lx huawei p smart(2018) + root

Service firmware Emui 9.1 PE C432 huawei p smart(2018) + root Magisk
This is the fig lx Emui 8 firmware on fig lx EMUI9.1 location c432 9pe.android.
Downloading the firmware, unpack the necessary files into the DLOAD folder. And put the folder with the firmware on the DLOAD sd card. Turn off the phone: hold down + - and turn it on after vibration, watch the firmware process. After the firmware, a hard reset will occur, and the boot loader is locked (before the firmware, make sure that stock recovery is in place)
Download firmware :
download
Installing root. Unlock bootloader, install
TWRP
..
We will need:
Magisk manager installed on the phone. RECOVERY_RAMDIS.img pulled from UPDATE.APP firmware How to patch stock recovery: We go in tel. in Magisk manager click Install Select patch file We are looking for our RECOVERY_RAMDIS waiting for the end (the path is specified after completion) magisk_patcher.img. The path of the phone memory folder Download If twrp with encryption, our patched file is transferred to our magisk_patcher.img.
1.We go to TWRP, if twrp is not in the Erecovery section, then we flash it into erecovery through img. (Wish) images.
2. We are patching our patched stock recovery to the recovery section.
3.We do through Twrp a reboot in recovery to start the root (it will not go into rekoveri already) With EVERY boot, if we want to root, we boot into the recovery (volume + when turned on), when rebooting, Magisk Manager does this automatically. Route received. What works: Full root, Magisk Hide and everything connected with it including Google Pay, as well as eRecovery What does not work: It is impossible to install a stock recovery, which means that to update the system you need to flash the native recovery, update it, and then do the procedure again.
Ready patched Stock recovery flash in RECOVERY section for C432 9.1.0.115
Download patched: download
Download Magisk : download
Already come updates on the C432, wait, or check through applications Hicare Norway choose a country.
Sorry for the English, Greetings from Belarus, from the forum 4p da. #mak6021

Is this for 2018 or 2019 model?

harry_turtle said:
Is this for 2018 or 2019 model?
Click to expand...
Click to collapse
2018

So, can I use this firmware to upgrade from emui8 to emui9?

tissa_ said:
So, can I use this firmware to upgrade from emui8 to emui9?
Click to expand...
Click to collapse
Yes

will this work on C782?

punteruk said:
will this work on C782?
Click to expand...
Click to collapse
Try, but I do not guarantee, firmware for c432

Hello is this beta or full release ?

0ckysaurus said:
Hello is this beta or full release ?
Click to expand...
Click to collapse
Official firmware, not beta.

What is the language of the rom?

lecortes said:
What is the language of the rom?
Click to expand...
Click to collapse
Multi-language firmware all languages.

mak6021 said:
Official firmware, not beta.
Click to expand...
Click to collapse
where you find this firmware?

javadoverall said:
where you find this firmware?
Click to expand...
Click to collapse
androidhost
This is the official firmware. Do not doubt
:angel:

mak6021 said:
androidhost
This is the official firmware. Do not doubt
:angel:
Click to expand...
Click to collapse
same body tested for another model.. like fig la1..?
Are you think answer for another model

javadoverall said:
same body tested for another model.. like fig la1..?
Are you think answer for another model
Click to expand...
Click to collapse
Huawei P Smart FIG-LX1 FIG-L11 FIG-L31 HWRCF Figo-L11 Figo-L31 I think I should get up, location c432?

mak6021 said:
Huawei P Smart FIG-LX1 FIG-L11 FIG-L31 HWRCF Figo-L11 Figo-L31 I think I should get up, location c432?
Click to expand...
Click to collapse
why?

Hi.
If I do not want to root my cell phone. What should I do for this?

freeuser00 said:
Hi.
If I do not want to root my cell phone. What should I do for this?
Click to expand...
Click to collapse
Download only the firmware but it will lock your bootloader

How does rooting keep the bl unlocked?
I have a FIG-LX1 that I rebranded to C432 and I patched NVME to unlock Bootloader
Can I and how do I re unlock the bootloader on Emui 9
And how to I downgrade to Emui 8
Thanks in advance

Can someone create a mirror? Download max reached...