Related
Hi,
Well i was trying to rooting up my phone for trying out Cynogenmod 9 (ICS 4.0) .....
The files i transferred to the sd card :
1.) recovery-clockwork-5.0.2.6-galaxyace-fix
2.) upd_1
As instructed on tutorial guide... first i installed clockwork 5.... its done without any errors.... after that i tried "upd_1", which aborted installation with some "(status 7)" error..... after that i rebooted cell and gone for factory reset..... after that my ace got stucked up on boot loop screen.... cant go any furthur..... same step repeats many many times..... but no result......
I tried 2 guides....
1.) http://forum.xda-developers.com/showthread.php?t=1034145
2.) http://forum.xda-developers.com/showthread.php?t=1552695
I'll appreciate any help regarding my boot loop problem.....
Thanks & Regards
Status 7 error relates to errors in updater script,it should not have been ignored like that.Furthermore,upd_1.zip is a root package for GB roms,not ICS roms,so wrong bin file there.Can you get to download mode? Or,atleast recovery?
Same problem
Hi I have the same problem just keeps cycling through the Samsung boot screen on a loop. I can get into Download mode and also I can boot into recovery. I downloaded a stock rom S5830XWKPN_S5830SWKP6_S5830XEUKP1_HOME Then I used odin 4.38 and clicked on OPS and used cooper_v1.0.ops and then clicked on one package and clicked on the zip of the stock rom I downloaded. Everything seemed to go well, but then the phone got stuck on this loop of the Samsung boot screen. I hope that you can help please.
Best regards Wez
Prawesome said:
Status 7 error relates to errors in updater script,it should not have been ignored like that.Furthermore,upd_1.zip is a root package for GB roms,not ICS roms,so wrong bin file there.Can you get to download mode? Or,atleast recovery?
Click to expand...
Click to collapse
hmmm I think he's still in GB. I think he means he's trying to prepare his ace to flash ICS rom cause obviously you can't flash ICS with stock recovery.
as for the op... try using stock recovery and flash upd_1? thats what I did.
kerrywez said:
Hi I have the same problem just keeps cycling through the Samsung boot screen on a loop. I can get into Download mode and also I can boot into recovery. I downloaded a stock rom S5830XWKPN_S5830SWKP6_S5830XEUKP1_HOME Then I used odin 4.38 and clicked on OPS and used cooper_v1.0.ops and then clicked on one package and clicked on the zip of the stock rom I downloaded. Everything seemed to go well, but then the phone got stuck on this loop of the Samsung boot screen. I hope that you can help please.
Best regards Wez
Click to expand...
Click to collapse
Boot into recovery and wipe data.
Make a wipe in standart or full wipe in custom and flash again with odin! It will surely help
Doo:DAce said:
hmmm I think he's still in GB. I think he means he's trying to prepare his ace to flash ICS rom cause obviously you can't flash ICS with stock recovery.
as for the op... try using stock recovery and flash upd_1? thats what I did.
Boot into recovery and wipe data.
Click to expand...
Click to collapse
Seems like it...Anyway,I dont think the OP even comes here now
I too have this problem!
Is the phone bricked? I have tried using packages from Odin and One Click Unbrik but they both fail, I can get into download mode, but I cannot get into recovery mode. It just says ARM9 or something whenever I try. Is there a solution yet?
i fixed my phone i kept on having boot loops after falshing single packing so i turned the phone off then hold power and home till you come to recovery option wipe cache and i think its factory reset or full wipe so do both wipes then reboot phone WALA my phone was working hope this helps and dont forget to tick thanks button :good:
boot loop with other issues too...
hi there guys. I'm new to this forum and also to flashing...
but anyways I had a good look before flashing my phone but still messed it up...silly me
I tried rooting my phone via SD card(first clockwork mod ace 4 followed by clockwork mod 5 as said in tutorial) then upd_1 and then cm9. But after installing clockwork mod ace 4 I get :" E: failed to mount/ system (invalid argument)" same happens when trying to wipe cache partition/ data/ factory reset.
I can get into android system recovery no problems and also into odin download mode (where it gives you the warning and prompts you to press volume up if you still want to continue. It is also stuck on the samsung screen if I don't press anything.
But when trying to connect the phone to odin in order to rectify what I've done (with the one package methode, either gingerbread or cmw9) odin won't detect my phone. I used several different cables, original samsung cables, changed usb ports (directly off the motherboard) but to no avail.
heimdall will recognise the phone as far as I can see (when you click on detect device it says: "device detected") but I cannot find the right files I need to use for heimdall. I would very much appreciate any help and advice. Please point me in the right direction, show me where to download the correct files and which ones and please bear in mind I'm a noob. put it as plain as bread for me please :good:
just flash clockworkmod 5 and format system and data...
do a complete wipe ...clear cache,, wipe dalvik
then mount system and data and install any of ur modded stock or cm7... enjoy
---------- Post added at 08:48 PM ---------- Previous post was at 08:47 PM ----------
many roms are pre rooted plus u dont need rooot access to flash rom
to flash CustomROM u dont need to root first our ace simply flash CWM 5 and put your CustomROM flashable .zip to your sdcard and then fullwipe (data,cache,advantage) and done.....
most of CustomROM now can directly flash from previous or Other CustomROM without flash to StockROM first..
CMIIW
Since when do you need to flash cwm before you root? I did it the other way around and no problems at all. I was on 2.3.5
Sent from my GT-S5830 using xda premium
hey, well I did what you said but when I do so it just comes up with installation aborted...same as with everything else I try to install from SD card...
---------- Post added at 09:21 PM ---------- Previous post was at 09:16 PM ----------
AaronvAce said:
Since when do you need to flash cwm before you root? I did it the other way around and no problems at all. I was on 2.3.5
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
I won't question what you guys are saying since I'm a noob but the tutorial I followed specifically told me to do that. I just get installation aborted every time I try to install recovery clockwork 5...or anything else for that matter. thanks for your help guys
maybe this will give you a better picture of my predicament...
I think I just spotted my error...I believed the model is Samsung galaxy ace S5830 but in fact it's the S5830i. how does that change things for me???thanks for replying
val1607 said:
I think I just spotted my error...I believed the model is Samsung galaxy ace S5830 but in fact it's the S5830i. how does that change things for me???thanks for replying
Click to expand...
Click to collapse
It changes everything. 5830 is completely different from 5830i (they only share the name). Roms and mods for 5830 might brick your phone, so be careful.
dxppxd said:
It changes everything. 5830 is completely different from 5830i (they only share the name). Roms and mods for 5830 might brick your phone, so be careful.
Click to expand...
Click to collapse
lol as if I didn't already find out... but what can I do now? apparently there is no custom mod for the 5830i in ICS or jelly bean.cannot flash a new rom from SD card neither with odin. what am I doning wrong?why won't my pc recognise the phone? (even reinstalled windows and all the phones drivers also tried installing drivers with zadig, after reinstall of windows the phone was finally found there but still no luck for odin)
hey guys thanks I figured it all out I was using the wrong version of odin...got it all sorted now THANK YOU!!!
i have got strucked in startup screen on my galaxy ace(S5830) while installing cwm
As instructed on tutorial guide... first i installed clockwork 5.... its done without any errors.... after that i tried "upd_1", which aborted installation with some "(status 7)" error..... after that i rebooted cell and gone for factory reset..... after that my ace got stucked up on boot loop screen.... cant go any furthur..... same step repeats many many times..... but no result......
I tried 2 guides....
Hi,
other day I was playing game on my note 1 and then battery ran out and now my phone wont boot up and it is stuck at animated samsung logo.
It was running on stock rom and it was never rooted.
Now when i go in recovery mode it gives this error:
failed to mount /efs
I tried installing the stock rom but with no luck.
I am newbie into this all, so can you please guide how to fix this ..
Regards
ahmedmasu said:
Hi,
other day I was playing game on my note 1 and then battery ran out and now my phone wont boot up and it is stuck at animated samsung logo.
It was running on stock rom and it was never rooted.
Now when i go in recovery mode it gives this error:
failed to mount /efs
I tried installing the stock rom but with no luck.
I am newbie into this all, so can you please guide how to fix this ..
Regards
Click to expand...
Click to collapse
You should try to put your Note in download mode and flash a stock rom with Odin.
You must flash the PIT file to repartition your phone's storage, chose the right one (16 or 32 Gb).
I am almost sure that your phone is soft bricked and it is recoverable.
If it don't work, thant mean that your have bad blocks in your phone's storage. Have you wiped your note while under ICS android ?
what rom were you on? if JB, try a factory reset.
nokiamodeln91 said:
what rom were you on? if JB, try a factory reset.
Click to expand...
Click to collapse
I was on latest stock rom which is ICS.
Btw I tried to reset it to factory but with no luck
lionelia said:
You should try to put your Note in download mode and flash a stock rom with Odin.
You must flash the PIT file to repartition your phone's storage, chose the right one (16 or 32 Gb).
I am almost sure that your phone is soft bricked and it is recoverable.
If it don't work, thant mean that your have bad blocks in your phone's storage. Have you wiped your note while under ICS android ?
Click to expand...
Click to collapse
Thank for your reply.
I tried flashing the stock rom with Odin but the error remained there
Can you please give me a link from where I can get PIT file?
ahmedmasu said:
I was on latest stock rom which is ICS.
Btw I tried to reset it to factory but with no luck
Click to expand...
Click to collapse
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
nokiamodeln91 said:
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
Click to expand...
Click to collapse
Is there any guide\link to do this ?
http://forum.xda-developers.com/showthread.php?t=1901191
nokiamodeln91 said:
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
Click to expand...
Click to collapse
I have successfully flashed rom on my phone which is : N7000ZSLPF_N7000OZSLPF_OZS
My phone is now out of bootloop but now I face a different issue that I cant get my sim card work, it gives no signal and I noticed one more thing that IMEI of my phone is blank.
I went into recovery mode and it is still showing that efs error as it was showing before...
Any suggestion what should I try to fix this ?
So you never installed any rom or a custom kernel?
---------- Post added at 03:15 AM ---------- Previous post was at 03:11 AM ----------
Look for a file on your storage named efs.autobackup.img. If nothing like that, check on this site http://www.cvxcvx.pl/en/podstrona-0/naprawa-efs-w-i9100-n7000/ for some instructions. Read carefully and proceed.
nokiamodeln91 said:
So you never installed any rom or a custom kernel?
---------- Post added at 03:15 AM ---------- Previous post was at 03:11 AM ----------
Look for a file on your storage named efs.autobackup.img. If nothing like that, check on this site http://www.cvxcvx.pl/en/podstrona-0/naprawa-efs-w-i9100-n7000/ for some instructions. Read carefully and proceed.
Click to expand...
Click to collapse
I followed the instructions provided by the manual ... after step 2 I get imei but after step 3 it get empty again.
Signals do come after step 2 but when I try to make some call it says "Not registered on network".
Looking forward to your reply.
i cannot help you in this case if there is no efs backup.. so.. you on your own..
nokiamodeln91 said:
i cannot help you in this case if there is no efs backup.. so.. you on your own..
Click to expand...
Click to collapse
Thanks for your help so far...
I currently have an imei but it is some random number starting with "004999" and I do get signals but cant make a call .. Do you know if there is some hope for me or not .. and what else I can try.
This is the developer imei. You may be able to make calls of you try a GB rom. Or there is one rom by ThaiDai which had some work around built into it. I don't know which one.
Else the site I mentioned earlier has contact info of cvxcvx. He can fix your phone remotely but by charging about 10 euros.
Need help for a bricked N7000
Hi guys,Im a complete newbie to the whole custom rom scenario. Yet, after being fed up of touchwiz on my N7000 i decided i wanted to taste some KitKat on my phone. After seeing many videos with positive reviews I thought it would be a rather easy process. But somehow I seem to have made a mistake and now my phone is stuck on Samsung Galaxy Note N7000 logo. I cant get into recovery mode as suggested on most places. As of now I only have access to the download mode but dont know what to do with it.
Here's what I tried doing :
1) I was on stock OS, and these are my specifics : Galaxy Note N-7000 running JB 4.1.2
Baseband version : N7000DDLS6
Kernel version: 3.3.31-906407
BUild number:JZO54K.N7000DDLSC
2) As I was following the procedure from Omnirom's official website, I first rooted my phone using Framaroot's single click root app. This gave me SuperSU app.
3) Then I tried installing TWRP recovery (recommended by Omni) but they dont support the N7000. I read a few other tutorials where it was stated the CWM recovery and that too Philz CWM recovery is the best to go with. Apparently it is just stock kernel with CWM recovery. Since the latest one(philz_touch_6.07.9-n7000) was not being installed, I installed the one before that which worked (PhilZ-cwm6-DDLSC-ODD-5.11.2-signed).
4) I even installed the ROM Manager as per the tutorial. However, uptil now I could access recovery mode ( Vol UP+Home+Power) and i saw the touch enabled philz recovery mode once. Then i did system reboot.
5)After reboot, this is where I did a mistake in my opinion. I opened ROM Manger and clicked on "open in recovery mode" option. Since then the phone is stuck on the Galaxy Note N7000 logo. Please help me revive the phone. Thanks in advance. Again, Im doing this for the first time and most terms are new to me. So please explain the procedure as other tutorials are not very clear.
You missed on reading the most important instructions.
Rom manager will not work with note. Recovery is built into the kernel on note and not as a separate partition.
Try harder to get into recovery mode. If you still can't, get the ddlsc Philz kernel tar version. Flash it using Odin. Then power off the device and boot into recovery. Then flash raw kernel. Reboot recovery. Flash omni and other required zips.
nokiamodeln91 said:
You missed on reading the most important instructions.
Rom manager will not work with note. Recovery is built into the kernel on note and not as a separate partition.
Try harder to get into recovery mode. If you still can't, get the ddlsc Philz kernel tar version. Flash it using Odin. Then power off the device and boot into recovery. Then flash raw kernel. Reboot recovery. Flash omni and other required zips.
Click to expand...
Click to collapse
How do I do i install the kernel using ODIN? I can only access download mode and nothing else. I cant access recovery mode. Please help.
PhilZ kernel has two versions, zip and tar. Use the tar version to flash via odin.
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
PhilZ kernel has two versions, zip and tar. Use the tar version to flash via odin.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Bro can i ask for the link of philz kernel and raw kernel. I'm new here. Thanks in advance.
ANDROID-000 said:
Bro can i ask for the link of philz kernel and raw kernel. I'm new here. Thanks in advance.
Click to expand...
Click to collapse
http://www.mediafire.com/?ep82ku4c6...o6dtlx8lbc3xz,ob3q9g36b9b3w22,d3v1gys7cbckiet
I would install KITKAT on my Galaxy S i9000 using the TWRP recovery.
In the list of devices on which you can mount the TWRP not indicated the Galaxy S I9000.
It 'an error or you can not?
1. download http://forum.xda-developers.com/showthread.php?t=1644240
2. download CodeROM-5.1.1-20150825-galaxysmtd
3. extract boot.img and rename it to zImage
4. run tar.bat
Result attached for convenience. All credits go to the devs!
Fragone said:
1. download http://forum.xda-developers.com/showthread.php?t=1644240
2. download CodeROM-5.1.1-20150825-galaxysmtd
3. extract boot.img and rename it to zImage
4. run tar.bat
Result attached for convenience. All credits go to the devs!
Click to expand...
Click to collapse
I will choose the ROM later.
Now I have already choosed the procedure to save EFS files.
Now I'm choosing what type of recovery use.
I repeat: I would use TWRP but my smartphone does not appear in the list of supported devices.
On the contrary, in all the guides TWRP is indicated as an alternative to CWR.
Original TWRP is not available for i9000.
BUT: The CodeROM-Team managed to make it running onto i9000. Therefore, you need to extract TWRP from their ROM, convert it to an Imagefile and upload it with ODIN. This works!
Hello, I would like to also do this as stated in the OP. The image in the kernel.tar, that's what I have to flash the i9000 with Odin? Do I have twrp recovery then in the i9000?
Fragone said:
1. download http://forum.xda-developers.com/showthread.php?t=1644240
2. download CodeROM-5.1.1-20150825-galaxysmtd
3. extract boot.img and rename it to zImage
4. run tar.bat
Result attached for convenience. All credits go to the devs!
Click to expand...
Click to collapse
I downloaded the attached kernel attachment and flashed it with Odin. After doing this, the phone booted up in TWRP 2.8.7.0, but deleted the stock ROM. That's not all, I cannot do anything anymore with the phone, because the phone gives error with every ROM I try to install: "Unable to mount '/system'" and "Unable to mount '/data'". The phone does not boot in download mode either.
The big question is now, how to solve these errors? Can anyone help?
bronxboy1 said:
I downloaded the attached kernel attachment and flashed it with Odin. After doing this, the phone booted up in TWRP 2.8.7.0, but deleted the stock ROM. That's not all, I cannot do anything anymore with the phone, because the phone gives error with every ROM I try to install: "Unable to mount '/system'" and "Unable to mount '/data'". The phone does not boot in download mode either.
The big question is now, how to solve these errors? Can anyone help?
Click to expand...
Click to collapse
It seems that this Recovery with CWM does not support any other ROMs than CodeROM . Had the same problem lately, but in my case I expected it to be due to the fact that i changed the Filesystem of /system and /data to F2FS, but apparently that was not the main cause. (By the way- don't do that. It took me 2 days to get it back to EXT again).
The only way to solve it was to flash a complete Stock ROM with ODIN (I had to do it twice until everything was working again), using the files you'll find in the Stock-Rom-DB. I used this ones (sorry, no link atm, but you'll find it easily):
CSC_OXXJVC.tar.md5 3'778'609 20.04.2012 23:42 -a--
PDA_XWJW5_Sbl.tar.md5 285'562'932 20.04.2012 23:40 -a--
PHONE_XXJW4.tar.md5 12'585'010 27.04.2012 16:17 -a--
s1_odin_20100512.pit 1'744 06.08.2010 16:56 -a--
Luckily this did not affectet the area where the phones special data is located (IMEI and so on, donnot remeber the correct name for that).
I'm now back onto latest official CM10, because newer releases had quite a few issues, especialy bad connectivity (dont know why). With android 4.4.4 everything is working perfectly again.
Hope that helps to fix the problems my file did!
---------- Post added at 05:13 PM ---------- Previous post was at 05:08 PM ----------
Fragone said:
It seems that this Recovery with CWM does not support any other ROMs than CodeROM . Had the same problem lately, but in my case I expected it to be due to the fact that i changed the Filesystem of /system and /data to F2FS, but apparently that was not the main cause. (By the way- don't do that. It took me 2 days to get it back to EXT again).
The only way to solve it was to flash a complete Stock ROM with ODIN (I had to do it twice until everything was working again), using the files you'll find in the Stock-Rom-DB. I used this ones (sorry, no link atm, but you'll find it easily):
CSC_OXXJVC.tar.md5 3'778'609 20.04.2012 23:42 -a--
PDA_XWJW5_Sbl.tar.md5 285'562'932 20.04.2012 23:40 -a--
PHONE_XXJW4.tar.md5 12'585'010 27.04.2012 16:17 -a--
s1_odin_20100512.pit 1'744 06.08.2010 16:56 -a--
Luckily this did not affectet the area where the phones special data is located (IMEI and so on, donnot remeber the correct name for that).
I'm now back onto latest official CM10, because newer releases had quite a few issues, especialy bad connectivity (dont know why). With android 4.4.4 everything is working perfectly again.
Hope that helps to fix the problems my file did!
Click to expand...
Click to collapse
> The phone does not boot in download mode either
Did not see that before. I never had such an issue. Try it again, but do not push the power button more than 10 seconds, else the phone reboots again and again.
Sometimes, Download mode works even thought you cannot see anything on screen. try to connect the device to your PC and launch ODIN, you'll see if it can connect.
Tnx for your reply Fragone. It took me a while, had to wait on a USB jig for me to get the phone in download mode.
Unfortunately I did format to f2fs, how did you get back to ext? As for the other files, I did get my hands on an original rom, but I have to go look for the files you mentioned and try it with those, as the stock rom does not boot either. If you have the links, I'd be much abliged. Right now I go to sleep, just got home from the graveyard shift.
So someone finally returned my i9000 to me after a few years of use and I'm looking to put a current ROM on it so I can use it as a test phone. I keep seeing TWRP as the custom recovery used for the new ROMs. And yet like umberto, I've found there's no official custom TWRP for this phone. I'm pretty familiar with using TWRP on all my other devices.
So back to the original question of this thread - is there a way to get TWRP on the phone? It looks like Fragone's suggestion isn't the right way to go? The only thing I could find in my thread searches was a suggestion to use Mackay's ROM to get 2.8.1.0 and then (theoretically) it's on there so you could move to other ROMs. Any help?
D
@umberto santulli @dnaod
On the i9000, kernel & recovery share the same image, thus the recovery cannot be flashed separately. Therefore there is no i9000 on the TWRP site.
Yes, there are several kernels that feature TWRP, but you must be careful: kernel must be compatible with the ROM, otherwise, bootloop is result.
tetakpatalked from 1+One
tetakpatak said:
@umberto santulli @dnaod
Yes, there are several kernels that feature TWRP, but you must be careful: kernel must be compatible with the ROM, otherwise, bootloop is result.
tetakpatalked from 1+One
Click to expand...
Click to collapse
Thanks for this warning. I've flashed MacKay's ROM and am playing with it right now. I was planning on flashing OmniROM later using this same TWRP but I'm guessing I should read quite a bit more carefully with every ROM to see if they're compatible.
dnaod said:
Thanks for this warning. I've flashed MacKay's ROM and am playing with it right now. I was planning on flashing OmniROM later using this same TWRP but I'm guessing I should read quite a bit more carefully with every ROM to see if they're compatible.
Click to expand...
Click to collapse
There should be no problem to change the ROM. Just mind that the kernel & recovery share the image. I was using Omni 4.4.4 by kasper_h and Mackay kernel with TWRP
tetakpatalked from Nexus 7 flo
please my system hangs logo error after upgrade IOIO v4.2 [ For Both Single/Dual Sim Variants,via TWRP,,,and i try upgred firmware from sammobile via ODIN successful but still do not want to run :crying: I've tried to tell the samsung service and they say I have to replace the motherboard without warranty....:crying:
Did you try a factory reset? That is what i would do followed by flashing the original firmware (or latest available) for my device through ODIN.
I've already done it....please help me to this complete
I guess there's not much more you can do if you already wiped your device and flashed the correct official firmware for your device.
What was it exactly you were trying to flash that made it all go bad?
You could also give 'Smart Switch' a try on pc. There's an Emergency Software Recovery feature, but never used it so not sure you needed to make a backup first or if the program is going to download it for you.
"You could also give 'Smart Switch' a try on pc. There's an Emergency Software Recovery feature, but never used it so not sure you needed to make a backup first or if the program is going to download it for you.[" /QUOTE]
hi,
as far as i know, Smart Switch will not work /give errors on a rooted device. So he will be waisting his time.?
If you stock not rooted most probably, it should work.
Secondly,
OP , have you tried flashing your device correct, latest stock Rom (not just any Rom) , and try using Odin v 3.10. 7...... (.?)
good luck
has done the right way, if the samsung service does not have the software firmware. and I defer to the replacement motherboard ... because the prices are so high, that I know it's only a matter system firmware Why do I have to replace the entire machine ... I ask for help from friends here what should I do?:crying:
cj_hansen said:
has done the right way, if the service does not have the software samsung firmware. and I defer to the replacement motherboard ... because the prices are so high, that I know it's only a matter system firmware Why do I have to replace the entire machine ... I ask for help from friends here what should I do?:crying:
Click to expand...
Click to collapse
Flash stock firmware via Odin, once successful (PASS) go to stock recovery and do a factory reset (format data, format cache) and reboot to system.
Sent from my SM-N920I using Tapatalk
Notice I can only do the download mode. and if I entered recovery mode can only perform a data wipe and disable ADB reboot.apply the update, disable from external storage, cache from disable.dm-verity verification failed. I have to do to install the firmware from Odin was PASS successful when its results remain the same reboot hang stak SAMSUNG logo.
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-N9208
CURRENT BINARY: Official
SYSTEM STATUS: Custom
FRP LOCK: ON
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0500)
cj_hansen said:
Notice I can only do the download mode. and if I entered recovery mode can only perform a data wipe and disable ADB reboot.apply the update, disable from external storage, cache from disable.dm-verity verification failed. I have to do to install the firmware from Odin was PASS successful when its results remain the same reboot hang stak SAMSUNG logo.
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-N9208
CURRENT BINARY: Official
SYSTEM STATUS: Custom
FRP LOCK: ON
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0500)
Click to expand...
Click to collapse
Did you do the steps I mentioned in my previous post?
Sent from my SM-N920I using Tapatalk
kopitalk said:
Did you do the steps I mentioned in my previous post?
Sent from my SM-N920I using Tapatalk
Click to expand...
Click to collapse
I have already done. but the result remains the same stop at the logo samsung N9208 powered Android
cj_hansen said:
yess...
Click to expand...
Click to collapse
If you really did the steps I mentioned to you and still see error, you have to go back to Samsung Service Centre.
Edit: Btw after a factory reset, it will take a while booting up.
Sent from my SM-N920I using Tapatalk
kopitalk said:
If you really did the steps I mentioned to you and still see error, you have to go back to Samsung Service Centre.
Edit: Btw after a factory reset, it will take a while booting up.
Sent from my SM-N920I using Tapatalk
Click to expand...
Click to collapse
but why the Samsung service center can not solve this problem and told me to replace the motherboard price of about $ 400, what is a serious problem for the system in NOTE 5 ? please if there is another solution. Have you ever find a a problem like me ?
cj_hansen said:
but why the Samsung service center can not solve this problem and told me to replace the motherboard price of about $ 400, what is a serious problem for the system in NOTE 5 ? please if there is another solution. Have you ever find a a problem like me ?
Click to expand...
Click to collapse
Samsung won't bother to spend time checking what's wrong with your firmware. Can't boot? Do a firmware reflash. Still can't boot? Do a motherboard replacement. That's it.
Sent from my SM-N920I using Tapatalk
kopitalk said:
Samsung won't bother to spend time checking what's wrong with your firmware. Can't boot? Do a firmware reflash. Still can't boot? Do a motherboard replacement. That's it.
Sent from my SM-N920I using Tapatalk
Click to expand...
Click to collapse
I dont know, and maybe this is my fault. My first root with Odin and kernel arter97 and succeed. Next day I tried to install Xpose. then I update version 75.3 XPOSED-sdk22-tw-arm64-bustom build by WANAM via TWRP forget to backup from EFS. logo hangs here already occurred but TWRP still functioning. then I proceed with installing IOIO v4.2 with TWRP work then I do wipe data through recovery and reboot...
Any can help me please...?:crying:
everyone here misleaded you, in twrp wipe your all partitons including your device internal storage, then go to download mode and flash firmware via odin. Software if running and stuck at logo shows its more like software error not hardware, i am amazed to see because of rom this happened as kernel is more likely harm device. I am sure you made a mistake somewhere, dont be upset just try stock firmware it will fix the issue, if one firmware is not working try to download other one, try try and try
if you are stuck on initial screen this is more like kernel issue. try to flash custom kernel like skyhigh
Sent from my SM-N9208 using Tapatalk
RootUsers said:
everyone here misleaded you, in twrp wipe your all partitons including your device internal storage, then go to download mode and flash firmware via odin. Software if running and stuck at logo shows its more like software error not hardware, i am amazed to see because of rom this happened as kernel is more likely harm device. I am sure you made a mistake somewhere, dont be upset just try stock firmware it will fix the issue, if one firmware is not working try to download other one, try try and try
if you are stuck on initial screen this is more like kernel issue. try to flash custom kernel like skyhigh
Sent from my SM-N9208 using Tapatalk
Click to expand...
Click to collapse
+1. This sounds as simple as flashing stock firmware via ODIN (make sure it's the latest ODIN and latest firmware), then booting into stock recovery and doing a factory reset. Make sure you give it plenty of time to boot after you do this as well. It has to rebuild the dalvik which can take a while.
After you root, if you flash stock firmware back onto the device, you will almost always get a bootloop unless you factory reset. This will, however, wipe everything you have on your phone (Photos, SMS, apps). This happened to me as well and this method solved the issue.
EDIT: Also, I'm sure this goes without saying, but make sure you have the correct firmware for your device model.
If I failed what should be done? thank you all I will try it tomorrow. Today my note still in samsung service center
this is normal issue a little hard work is needed
Sent from my SM-N9208 using Tapatalk
You need to download full firmware package bootloder pda modem csc put your phone to download mood ad all file with code and flash go to http://www.tsar3000.com/Joomla/index.php?option=com_content&view=category&id=55&Itemid=82 and find your phone model stock
---------- Post added at 07:48 PM ---------- Previous post was at 07:27 PM ----------
But make sure you download full package and your country code example i have a s3 India code dd 100% solved your problem
hi guys, a friend of mine gave e this samsung galaxy tab S2 SM-T715 32GB that is stuck on bootloop, he said nothing about what he has done to it (sadly) all i know is that it's stuck in bootloop and it's impossible to access the recovery... what i've tried so far is this:
- find a TWRP and flash it with odin v3.14, which works but when the tablet reboots it's stuck on bootloop and i can't access the recovery
- find and flash an older version of the TWRP that's for the android 5.1 stock rom, flashed in and worked, though i can't access it after the reboot
- find and flash the latest OFFICIAL rom which works because when i get into the download mode i see "samsung official" on "binary" and not "custom" as it was after the previous tries
if anyone has an idea about what i should do please help me ^^ the tab is still in good condition and would be a waste to throw in the garbage tbh
y0ur5h4d0w said:
hi guys, a friend of mine gave e this samsung galaxy tab S2 SM-T715 32GB that is stuck on bootloop, he said nothing about what he has done to it (sadly) all i know is that it's stuck in bootloop and it's impossible to access the recovery... what i've tried so far is this:
- find a TWRP and flash it with odin v3.14, which works but when the tablet reboots it's stuck on bootloop and i can't access the recovery
- find and flash an older version of the TWRP that's for the android 5.1 stock rom, flashed in and worked, though i can't access it after the reboot
- find and flash the latest OFFICIAL rom which works because when i get into the download mode i see "samsung official" on "binary" and not "custom" as it was after the previous tries
if anyone has an idea about what i should do please help me ^^ the tab is still in good condition and would be a waste to throw in the garbage tbh
Click to expand...
Click to collapse
Flashed multiple part stock ?
Fully working with stock or still bootlooping?
bmwdroid said:
Flashed multiple part stock ?
Fully working with stock or still bootlooping?
Click to expand...
Click to collapse
i flashed a single file stock rom in "AP" on odin, how can i get multiple files rom? the one i've flashed right now was downloaded from sammobile with the latest updated, android 7.0 included (see a screenshot of the file name attached)
y0ur5h4d0w said:
i flashed a single file stock rom in "AP" on odin, how can i get multiple files rom? the one i've flashed right now was downloaded from sammobile with the latest updated, android 7.0 included (see a screenshot of the file name attached)
Click to expand...
Click to collapse
with the application samfirm ,you check "Binary Nature" and you have multiple files rom .Do'nt forget to specify the Region .
aboulafia1901 said:
with the application samfirm ,you check "Binary Nature" and you have multiple files rom .Do'nt forget to specify the Region .
Click to expand...
Click to collapse
i've flashed the 4 files i downloaded with samfirm, though it still bootloops i guess it's RIP
y0ur5h4d0w said:
i've flashed the 4 files i downloaded with samfirm, though it still bootloops i guess it's RIP
Click to expand...
Click to collapse
Might be worth a try to flash several times one after another.
Sometimes I read it helps.
bmwdroid said:
Might be worth a try to flash several times one after another.
Sometimes I read it helps.
Click to expand...
Click to collapse
flashed back to back 4 times, nothing changed sadly
Try perhaps with Frija in place of samfirm and perhaps with heimdall (under Linux but also windows I think) in place of Odin.
y0ur5h4d0w said:
hi guys, a friend of mine gave e this samsung galaxy tab S2 SM-T715 32GB that is stuck on bootloop, he said nothing about what he has done to it (sadly) all i know is that it's stuck in bootloop and it's impossible to access the recovery... what i've tried so far is this:
- find a TWRP and flash it with odin v3.14, which works but when the tablet reboots it's stuck on bootloop and i can't access the recovery
- find and flash an older version of the TWRP that's for the android 5.1 stock rom, flashed in and worked, though i can't access it after the reboot
- find and flash the latest OFFICIAL rom which works because when i get into the download mode i see "samsung official" on "binary" and not "custom" as it was after the previous tries
if anyone has an idea about what i should do please help me ^^ the tab is still in good condition and would be a waste to throw in the garbage tbh
Click to expand...
Click to collapse
did you fix yours?
I have the same model and finally fixed(its been > 3hrs so far) mine by formatting ALL partitions in TWRP, then installing 5.0.2.
Ri9000 said:
did you fix yours?
I have the same model and finally fixed(its been > 3hrs so far) mine by formatting ALL partitions in TWRP, then installing 5.0.2.
Click to expand...
Click to collapse
i still haven't but i might try when i have some free time! thanks for the advice would be awsome to actually fix it honestly
y0ur5h4d0w said:
i still haven't but i might try when i have some free time! thanks for the advice would be awsome to actually fix it honestly
Click to expand...
Click to collapse
mine is still up >30 hrs so looking promising. I've been working on it for 8 months or more. Thinking back, looking at the flash in "edl mode" guide . . .
[GUIDE] How to dump and write back the storage on most of Qualcomm devices
This is a generic guide that could be suitable for many Qualcomm based devices, once the phone can be triggered to EDL mode. To make sure this guide will work as expect, following requirements are needed: - Know how to trigger the phone to EDL...
forum.xda-developers.com
. . maybe this is how I should have done it, but mine was stable in download mode.
In the end this is what I did ymmv.
flash back to 5.0.2stock with heimdall,
flashing twrp3.1.0-1, format internal partitions,
reflash 5.0.2stock, & twrp3.1.0-1.
edit: after 1 day it is rebooting again. groan.