I only very recently got my Nexus 6 (Loving it so far), so I decided to pick up a Tylt Wireless Charger on a black friday sale to take advantage of it's wireless charging capabilities. I set up Smartlock when I got the phone and I returned to the settings to see if I could set up my wireless charger as a trusted device with the trusted NFC devices. I tried messing around with it for like 10 minutes and spent some time doing research but I can't seem to get it to work and I'm beginning to think it's just not possible. If anyone has any suggestions on how to get this to work, or to let me know it actually isn't possible, please let me know. Thanks in advance
The tylt charger has nfc?
Sent from my draconis using Tapatalk
vison5 said:
I only very recently got my Nexus 6 (Loving it so far), so I decided to pick up a Tylt Wireless Charger on a black friday sale to take advantage of it's wireless charging capabilities. I set up Smartlock when I got the phone and I returned to the settings to see if I could set up my wireless charger as a trusted device with the trusted NFC devices. I tried messing around with it for like 10 minutes and spent some time doing research but I can't seem to get it to work and I'm beginning to think it's just not possible. If anyone has any suggestions on how to get this to work, or to let me know it actually isn't possible, please let me know. Thanks in advance
Click to expand...
Click to collapse
I know that with my LG G3, it disables NFC when my phone is connected to my wireless charger (not a Tylt), so I would assume something similar happens with the N6. Plus the Tylt doesn't have NFC capabilities from documentation I've seen, so that is why it isn't possible.
I do not think wireless chargers are bluetooth or nfc devices -- "wireless" refers to charging without a cable attached to the phone.
Related
Hello,
I just got my Chromecast and it is pretty awesome. It's going to be great for business travel and I want to watch Netflix and stuff. I do have one concern though. When I first installed the Chromecast, my TV wouldn't recognize the HDMI signal. It was saying "no signal detected" our something along those lines. I unplugged the Chromecast from the TV and plugged it back in and out worked like a charm. I'm not an expert with how HDMI works, but should this be a cause for concern? I've tried to recreate the problem by unplugging it and plugging it back in (and even having it half plugged in) and I wasn't able to make the problem occur again. I guess I would just like some opinions. After all, I don't want to have a faulty unit, and if I do, I want to exchange it before my local Best Buy sells out.
Thanks!
thenoname said:
Hello,
I just got my Chromecast and it is pretty awesome. It's going to be great for business travel and I want to watch Netflix and stuff. I do have one concern though. When I first installed the Chromecast, my TV wouldn't recognize the HDMI signal. It was saying "no signal detected" our something along those lines. I unplugged the Chromecast from the TV and plugged it back in and out worked like a charm. I'm not an expert with how HDMI works, but should this be a cause for concern? I've tried to recreate the problem by unplugging it and plugging it back in (and even having it half plugged in) and I wasn't able to make the problem occur again. I guess I would just like some opinions. After all, I don't want to have a faulty unit, and if I do, I want to exchange it before my local Best Buy sells out.
Thanks!
Click to expand...
Click to collapse
I wouldn't worry unless I see it again multiple times
could be a fluke... we all know how hdcp/drm can mess things up
I can't get a signal on any of my tvs. Worked last night unplugged it during the day and tonight doesn't even show a signal.
Could the hdmi plug be damaged?
Sent from my SGH-M919 using xda premium
paperWastage said:
I wouldn't worry unless I see it again multiple times
could be a fluke... we all know how (link omitted since xda won't let me post links yet ) hdcp/drm can mess things up
Click to expand...
Click to collapse
Thanks for the info! I didn't realize HDMI did a handshake before connecting. If I see it again, I'll worry more. I think if I see it again, I'll either take it back to BestBuy or contact Google for a warranty replacement. Do you know how I would do that? I can't seem to find a support website for the Chromecast.
scoop_dtx said:
I can't get a signal on any of my tvs. Worked last night unplugged it during the day and tonight doesn't even show a signal.
Could the hdmi plug be damaged?
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
I would try a factory reset either by using the desktop app or by holding the button on the back for 25 seconds. Also, even though I don't need it, I use the HDMI extender that comes with the Chromecast for two reasons:
1) so when I'm moving it around my house, I don't have to unplug and replugin the actual unit. If the pins on the extender get damaged, its cheaper and easier to replace.
2) for stress relief so the unit doesnt get bent/pulled down over time.
Just got a 2016 Hyundai Sonata and am pretty disappointed with Android Auto.
Are there any tweaksn/root for this system or anyway to use other apps with it?
Red_Baran said:
Just got a 2016 Hyundai Sonata and am pretty disappointed with Android Auto.
Are there any tweaksn/root for this system or anyway to use other apps with it?
Click to expand...
Click to collapse
What problems do you have with it (just curious)? There are no mods that I'm aware of, we just have to use what they gave us. If it's an app that's bothersome, contact the dev. and ask them to make changes.
Unfortunately, there is a very small percentage of Android users that have Android Auto so devs are probably not that motivated to tweak it.
Sent from my SM-N910V using Tapatalk
When I plug my phone in to it some times it connects some times i does not, if I leave usb debugging enabled I get a random reboot, random apps not working, the lag, seems to use much more power than the USB port can put out. This happens with a rooted G4 and a stock note 4.
It's hard to find anything useful information about this cars system.
Red_Baran said:
When I plug my phone in to it some times it connects some times i does not, if I leave usb debugging enabled I get a random reboot, random apps not working, the lag, seems to use much more power than the USB port can put out. This happens with a rooted G4 and a stock note 4.
It's hard to find anything useful information about this cars system.
Click to expand...
Click to collapse
Ah, I'm experiencing the same issues, and I don't think they can be remedied by a hacked Android Auto app. I thought you were going to say something about the press limitation or desire for more apps.
I'm not sure if the connection issues are because of Hyundai or android auto. I have found that you have to wait for Bluetooth to connect before plugging your phone in.
The USB port not outputting enough power is the fault of Hyundai. I actually just submitted an email to their corporate about it, but I'm not sure how much good that will do.
Sent from my SM-N910V using Tapatalk
ireknole said:
Ah, I'm experiencing the same issues, and I don't think they can be remedied by a hacked Android Auto app. I thought you were going to say something about the press limitation or desire for more apps.
I'm not sure if the connection issues are because of Hyundai or android auto. I have found that you have to wait for Bluetooth to connect before plugging your phone in.
The USB port not outputting enough power is the fault of Hyundai. I actually just submitted an email to their corporate about it, but I'm not sure how much good that will do.
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
Yea I didn't think that an app hack would resolve the charge problem. The true reason is the lack of apps and features. I hate when software is artificially limited.
Have you tried a Y cable for the power issue?
Red_Baran said:
Yea I didn't think that an app hack would resolve the charge problem. The true reason is the lack of apps and features. I hate when software is artificially limited.
Have you tried a Y cable for the power issue?
Click to expand...
Click to collapse
I agree, I really wish there was a local music app designed for Android Auto, but there isn't one yet.
I'm actually using a y cable now, but it hasn't helped. I thought it was, but I just went on a 4.5 hour road trip and I had to stop after 3.5 to charge my phone with a 12 volt adapter. Granted, I started the trip with my phone at 60%, but still, it should charge via USB.
I received a response from Hyundai about the USB port and this is what they said:
"The usb port you refer to is working as designed. The only time your phone will charge when connected is when the phone is idle. The port was not designed to charge your phone while connected. Just a reminder that your phone needs to have a minimum of 30% battery life to operate Android Auto."
Not very helpful, and they don't seem to care.
Sent from my SM-N910V using Tapatalk
No problems here with Android Auto on 2015 Sonata Eco. I'm using both a Samsung S6E and Nexus 5X. Be sure to high quality cables.
Sent from my SM-G925P using Tapatalk
I have a 2015 Hyundai Sonata with Android Auto and I had very flaky connection problems when connecting my phone. My phone is the LG G4. What I can tell you is since my phone has been upgraded to Android 6.0 the connection has been flawless and very quick. I stopped using Android Auto because the connection was such a pain but since Android 6.0 I use it all the time now.
jkcarp94 said:
I have a 2015 Hyundai Sonata with Android Auto and I had very flaky connection problems when connecting my phone. My phone is the LG G4. What I can tell you is since my phone has been upgraded to Android 6.0 the connection has been flawless and very quick. I stopped using Android Auto because the connection was such a pain but since Android 6.0 I use it all the time now.
Click to expand...
Click to collapse
Thanks for your input! Looking forward to February when the Note 4 is updated to 6.0!
Sent from my SM-N910V using Tapatalk
I just got the 5.1.1 update on my Verizon Note 4 and I'm happy to report that connection is much better! It usually connects on the first or second try now.
Sent from my SM-N910V using Tapatalk
I also have a 2016 Sonata. One thing I have found that helps is to use the key fob to unlock your car as you are walking up. Do it about as far away as it'll reach. That gets the car's computer to start booting. It then is more reliable bringing up android auto. Most of the cases where I have not had it connect have been when I plug in the phone before the car is fully booted. I also second the comment about the USB cable. I was using a fairly thin one off my Note 5 charger and the phone would drain while using. I bought a 3' cable off monoprice.com and now the phone slowly gains charge.
I see a thread about OTG charging not being possible due to the Amazon kernel that is a few months old, has anything developed as far as this? I'm planning to install one into my cars dash and it would be great if I could also add a GPS module to it but obviously I need charging capability since it will be inside the dash and always plugged in.
RushNY said:
I see a thread about OTG charging not being possible due to the Amazon kernel that is a few months old, has anything developed as far as this? I'm planning to install one into my cars dash and it would be great if I could also add a GPS module to it but obviously I need charging capability since it will be inside the dash and always plugged in.
Click to expand...
Click to collapse
Nope. You get one or the other. That's unlikely to change as such use does not benefit Amazon (no clicks). You might consider a Bluetooth receiver which would leave the USB port available for charging.
Davey126 said:
Nope. You get one or the other. That's unlikely to change as such use does not benefit Amazon (no clicks). You might consider a Bluetooth receiver which would leave the USB port available for charging.
Click to expand...
Click to collapse
Fantastic I never knew bluetooth gps modules were a thing! Do you personally use one? I'm not too keen on modern android especially when it comes to separate devices like this, will I be able to use it with any maps app and be able to set the default gps device or will it only work with certain apps designed specifically to use one?
RushNY said:
Fantastic I never knew bluetooth gps modules were a thing! Do you personally use one? I'm not too keen on modern android especially when it comes to separate devices like this, will I be able to use it with any maps app and be able to set the default gps device or will it only work with certain apps designed specifically to use one?
Click to expand...
Click to collapse
Search Amazon "GPS receiver bluetooth". Pricier than usb receivers. I do not use one; prefer devices with integrated chip. However, I have tried a USB receiver on this device to verify it works. No personal experience with BT receivers. Another poster mentioned an app that would permit reception of GPS data from another device such as a phone. Good luck.
I'm having a really hard time getting Android Auto to launch with my S7 Edge and Mophie Juicepack. I have a Kenwood DDX9702S for a head unit. I got it to work once but don't know how or why. It works flawless if I don't use the case. Tried both the USB cable that came with the case, and an Anker USB cable, and so far, no luck. I've also tried connecting with the case already on (charging) and off (not charging). Not sure what I'm missing.
I did cross post this to Android Central and the Android Auto subreddit, and have either gotten very few replies or no one has an answer. This is getting pretty annoying. I have a hard time believing I'm the only one who has attempted this?
I'm installing an Alpine ILX-W650 for Android Auto in my car next week, and noticed it requires simultaneous Bluetooth and USB connection to the phone. I want an easy way to dock my S10 each time I get into my car, something that's quick, easy, secure, looks nice, won't wear down the type C port on my phone, and charge faster than the 1A provided by the Alpine unit.
If I have to custom fabricate a docking cradle that fits just right in my MK6 GTI, I will, but just want to find the best solution. I have a Baseus auto clamping vent mount with the IR detector and Qi fast charging, and could try affixing a magnetic charging+data capable cable to that so the cable is in place to lock onto my phone's port automatically using the magnetic attraction, but have no idea if that will work or not. I read in one forum that someone was able to wirelessly charge their phone while it's plugged in for Android Auto, anyone know if that will work for the S10? My magnetic cables are the Wsken X1 models, I have no idea if they'll work and how reliable a connection they will provide, anyone try something similar?
Another option I'm considering is using the Samsung Dex Pad as a docking station, and mounting the phone horizontally since I will be controlling everything from my voice and Alpine's touchscreen while driving, and won't need to really do anything with my phone. I asked Samsung if it will work, and they said they've never tested it, suggested that I just try it and find out. I don't want to buy the Dex Pad if it's not going to work, has anyone tested that so I don't have to? Probably will anyway, but it from a place with a good return policy, but am hoping someone out there has thought of this and can enlighten me on what to expect.
Thanks!
otizzy said:
I'm installing an Alpine ILX-W650 for Android Auto in my car next week, and noticed it requires simultaneous Bluetooth and USB connection to the phone. I want an easy way to dock my S10 each time I get into my car, something that's quick, easy, secure, looks nice, won't wear down the type C port on my phone, and charge faster than the 1A provided by the Alpine unit.
If I have to custom fabricate a docking cradle that fits just right in my MK6 GTI, I will, but just want to find the best solution. I have a Baseus auto clamping vent mount with the IR detector and Qi fast charging, and could try affixing a magnetic charging+data capable cable to that so the cable is in place to lock onto my phone's port automatically using the magnetic attraction, but have no idea if that will work or not. I read in one forum that someone was able to wirelessly charge their phone while it's plugged in for Android Auto, anyone know if that will work for the S10? My magnetic cables are the Wsken X1 models, I have no idea if they'll work and how reliable a connection they will provide, anyone try something similar?
Another option I'm considering is using the Samsung Dex Pad as a docking station, and mounting the phone horizontally since I will be controlling everything from my voice and Alpine's touchscreen while driving, and won't need to really do anything with my phone. I asked Samsung if it will work, and they said they've never tested it, suggested that I just try it and find out. I don't want to buy the Dex Pad if it's not going to work, has anyone tested that so I don't have to? Probably will anyway, but it from a place with a good return policy, but am hoping someone out there has thought of this and can enlighten me on what to expect.
Thanks!
Click to expand...
Click to collapse
Hello, I have a 04 Audi A4 with a 13” screen and a Dex pad under my arm rest. Out of sight and protected. I love it! My monitor lets me connect and control my phone via touch screen. Torque app works well on a 13” screen. I also have a dell d10u that I use for tuning while my main unit is my s10. I have enabled developer mode on my Dex and the use "Dex Max" App, It helps out as well.
jcsvsi said:
Hello, I have a 04 Audi A4 with a 13” screen and a Dex pad under my arm rest. Out of sight and protected. I love it! My monitor lets me connect and control my phone via touch screen. Torque app works well on a 13” screen. I also have a dell d10u that I use for tuning while my main unit is my s10. I have enabled developer mode on my Dex and the use "Dex Max" App, It helps out as well.
Click to expand...
Click to collapse
Id be interested in this too. Can you expand a little on your setup? I'm looking to do the same with adding a larger LCD while maintaining touch-functionality via android. I'm wanting to piece together a 10-13" LCD along with a capacitive usb overlay but haven't verified that the touch would work via android along with my CarPC.
As for docking, I've been using a cheap $8 Ebay USB hub with success in both DeX and AA in my setup.
Hope theses pic are visible. I will have to get my other phone to display my setup with Dex running.
Forgot one.
Not the cleanest installation, not the worst.
My high mileage e85 Audi A4. Sorta a "beater with a heater".
Here are some pictures, the few are with screen mirroring with the aid of seconscreen app, overlay app and a few others. The rest are in Dex mode which yelids a better picture however apps don't auto start in full screen, while driving it can be somewhat cumbersome.
Galaxy s10
Sorry, pictures seem to be upside down.
My in car screen layout.